Dell local security backup has stpped working help please

Similar Questions

• Microphone has stopped working - HELP, please!

  Hello.

  My plug-in headset and regular lapel microphone suddenly stopped working.  It was working before and I know that my helmet or conventional microphone are not broken.

  I noticed this problem when I would go to a Voice Chat room and trying to talk into the microphone, the volume bar would move only a little bit and not much.

  I checked all my settings of volume and nothing is low in the volume bar of the Realtek High Definition Audio, or the DD Realtek Audio Manager.  Everything is fine and when I lifted up the microphone, he is selected by default and indicates that it works correctly, but the sound does not come through.

  I am running Windows Vista Home Premium, my helmet is called Dynex, my plug in microphones are called Plantronics and the other on my Logitech webcam.  Help, please.

  ~ Marynonimous

  P.S. I also went to my menu of BIOS and changed my setting audio on-board car Enabled to disabled, and then back to Enabled, and this still does not work.

  P.P.S. My speakers work fine.  I hear people speaking from the voice chat rooms and hear the sounds of my computer.  I hear them on my helmet and my speakers when I unplug my headphones, so my speakers are absolutely perfect.

  Well, I don't have the connected headset on the helmet correctly.  I fixed it.  Thank you.  I'm sorry.  Thank you.  God bless you all.  Love and prayers to Jesus.

• Dell Support Center has stopped working - HELP!

  I get a message on my screen saying that the Dell's Support Center has stopped working and we're looking for a solution.

  I think something happened to this software, but I'm not knowledgeable enough to be able to make it out for me.

  I tried to center of Dell Support from the Start Menu.  The logo appears but nothing else happens.

  What should I do to get it working again?

  Hello

  I had the same problem. Read everything above,

  Tried all of the suggested fixes, but the problem remains still.

  Just before the end of the installation, I got the same message, that is to say:

  "Error getting cert filename (property: Custom Action Data) of MSI.

  As I find it very useful, I was determined to get it back, so...

  I looked in my PROGRAM directory for any sign of Dell Support Center and therein, a subdirectory for "Dell Support Center.

  There were two points in there, or an uninstall program.

  I just remove the entire subdirectory "Dell Support Center", thinking to allow the installation program again.

  then deleted the downloaded "aulauncher" (installation app for Dell Support Center).

  then restarted the pc.

  Then I followed the link to download Dell Support Center of DELL again, the website downloaded, ran it, REBOOTED and all is now ok with my world. :-)

  I hope this helps.

• McAfee Security Center has stoppped working, it keeps popping up in a box how dod I solve this problem?

  McAfee Security Center has stoppped working, it keeps popping up in a box how dod I solve this problem

  Hello

  I suggest you ask McAfee help with this problem.

  http://www.McAfee.com/us/support.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You could try to scan your system for Malware to see if this is the cause.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• "Dell WLAN Network Card" has stopped working

  Windows gives me a message that "Dell WLAN Network Card" has stopped working. It is a common problem and is there a solution?

  PS: Is alternative medium n to go to the uninstall step (your step 2)? I don't have the "Run" command in the start menu. It is a Dell laptop, Inspiron with Windows Vista Home version.

  Thank you

  If you have a key of Windows on your keyboard, press Windows + R

  Otherwise, right click on start > properties > customize > Advanced tab > scroll down to the list of "items on the start menu" until you get on 'Run' > check the box "Run" and OK your way out.

  If you use the "Start menu classic", it is not "Advanced" tab and the check box command run figure in the list 'Advanced options from the start menu.

• I get a message "McAfee security Center has stopped working a few seconds, what should I do?

  I get a message "McAfee security Center has stopped working a few seconds, what should I do? I have installed all updates.

  Try to reinstall McAfee. Uninstall normally through programs and features (Win7/Vista) or add or remove programs (XP). Or, you can use the removal tool to uninstall: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  Go to http://home.mcafee.com to download again and reinstall McAfee. If you have a disk however, just use it.

• Microsoft Windows error message: "Dell DataSafe 2.0 has stopped working".

  On my new laptop purchased recently, I get an error message from Microsoft Windows: "Dell DataSafe 2.0 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I then select the" close program"button to close the message.  But, no info additional re: a solution is always provided and within a few seconds the error message recurs, repeatedly.  It's maddening, it goes without saying.  My DataSafe account is current and operational.  I can't find any info on the site of Dell re support: this error, probably because it's a message of Windows...?

  But it's a Dell software!
  You look at not only their website, contact you them directly.

  Contact Dell: http://support.dell.com/

  See you soon. Mick Murphy - Microsoft partner

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• I get a message 'Adobe Illustrator has stopped working. Please activate the fonts Verdana and r

  I get a message 'Adobe Illustrator has stopped working. Please activate the Verdana fonts and relaunch Illustrator. "I looked in my fonts and I do not have the fonts veranda. What I would do.

  You must install all four members of the family of Verdana fonts on your machine. Please check the following thread that corresponds to your question:

  http://forums.Adobe.com/message/5905430#5905430

  Kind regards

  Rambour

• I get a pop up saying that my dell security system has stopped working what I have to do to stop it

  from the windows of downloads last week I get two pop ups saying my dell security system does not work and then another said that they are looking for a solution but that my system shuts down.  What should I do to get rid of this

  You should ask your question in the forums of Dell support.
  http://en.community.dell.com/support-forums/desktop/default.aspx for desktops
  http://en.community.dell.com/support-forums/laptop/default.aspx for laptops.

• Windows 7 - current backup - Message 'Windows backup has stopped working' when clicked details

  I really hope someone can help me solve this problem.

  From the center of the action of the message "backup Windows has stopped working" appears in all of the following situations:

  Change the settings - custom selection
  The details view button
  The details of the problem for this are:
  Signature of the problem:

  Problem event name: APPCRASH

  Application name: sdclt.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce79920

  Fault Module name: sdclt.exe

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce79920

  Exception code: c0000005

  Exception offset: 000000000006ec27

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 2057

  Additional information 1: 074f

  More information 2: 074fc5e23444d0689ec391e7e8fdce41

  3 more information: 9fb7

  Additional information 4: 9fb70d37706531bfd07966220029ca0e
  Curiously, however, the backup runs, and I can change the settings if I let you choose the selection option "auto - let windows choose".
  I did what follows in the hope of fix:
  Checked and disconnected the destination of backup disks.
  check all drives (chkdsk/f)
  Reboots (several)
  Disabled antivirus
  Validated executable file (it is identical to another machine where everything works)
  Any help gratefully received that I am at a loss!

  Hello

  You back up files to any external device?

  You can try the following and see if it helps.

  Method 1: System File Checker

  System File Checker will try to help you in fixing all corrupted files and folders from the computer.

  Please click on the link below:

  http://support.Microsoft.com/kb/929833

  Method 2: check if the Windows backup service is started or not.

  Follow these steps to search for the same thing.
  1. Select start > run and type services.msc.
  2. search for the Service backup Windows and double-click the Windows backup service to bring up Windows backup service properties window.
  3. Select automatic and then click Start.
  4. If this is not the case, it just select the menu drop down and then start.
  Also check if the service dependency for this service is started by following the same steps as above.
  First of all, to check which is the service dependency for Windows backup service follow these steps:
  1. Select start > run and type services.msc.
  2. search for the Service backup Windows and right-click on it. Click Properties and on the Dependencies tab, you will find the dependent services.
  3. write down these services that depend on and follow the 4 steps above and launch these services too.
   
   
   
  For more information, please see the links below:

  How Windows selects the files to back up?
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Back up and restore: frequently asked questions
  
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
   
   

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Every few minutes, we receive a small Microsoft Windows pop-up window that says: «Carbonite Secure Backup Engine not working anymore...» »

  Every few minutes, we receive a small Microsoft Windows pop-up window that says: "Carbonite Secure Backup Engine has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Our computer remotely accessible Carbonite technician.  He said Carbonite works correctly and could not understand why we continue Gets the pop-up.  Carbonite has been uninstalled and reinstalled twice, but the pop up comes back.  Any suggestions?

  Hello

  Generally, this sort of thing occurs when a program conflict makes one or the other case work, maybe even for a few seconds. During these few seconds Windows will pick it up and give you this popup. Here's a possible solution:

  1. Click the start or Windows Orb.
  2. In the search bar, type 'system' (without the quotes)
  3. At the top of search results, there will be an option for "System Configuration"
  4. A window willl pop up, with several tabs and options. Click on the tab "General".
  5. On this tab, there will be a selection for the "selective startup". Click on this button.
  6. Then two options becomes clickable, deselect the option "Load Startup items".
  7. Restart your computer. ! WARNING: Do not access the internet during this time because you will be vulnerable to viruses, spyware and software malware!
  8. Once he starts back, Carbonite Backup launch, because no program will run.

  The problem should be solved. If this is the case, immediately turn on your antivirus program and enjoy your work computer. If not,

  1. Follow steps 1 through 5 above to return to the System Configuration.
  2. Under Selective startup, uncheck also load Services.
  3. Restart the computer.
  4. Once it starts, run Carbonite.

  It should now be resolved. If this is not the case, there is certainly a problem with either Carbonite or how Carbonite and Windows work together, and you should communicate with each other.

  For further assistance, if this does not resolve the problem, then slowly run your normal programs one by one until the multibordure question once again. You have now isolated the program conflict! Congratulations!

• "Windows Explorer has stopped working" - help!

  Running Vista HP, sp 2.

  Firewall on the router & McAfee.

  WE automatic updates of windows

  In the last two days, I get "Windows Explorer has stopped working" pretty constantly.  Not the kind of endless loop, just whenever I try to use it, it will give the errmsg, close, claim that it restarts and fail to do so.

  I've had a scout quick tour here for solutions and tried all that is obvious:

  (1) run the System File Checker (Nothing found)

  (2) run chkdsk (Nothing found)

  (3) installed and run a-squared (found nothing)

  (4) off the display of thumbnails (past again)

  (5) started in SafeMode (past again)

  FWIW, a few other applications have the same problem, for example Adobe Acrobat will crash all trying to save a file, to the point where it's the folder view.  And Acrobat and Windows Explorer are broken only if you try to display all drives on the computer.  If you start to US at a lower level, in 'my documents' therefore very well with what he shows you.  If you then scroll down to 'computer' and click to enlarge, this is the point where it crashes.

  However, other applications (such as Word) can access and save items to this level, for example I can save a word doc on my phone as another drive of the word itself, although if I tried to slide anywhere in US it would be crushed before I could even see the phone was there.

  My hunch is that it started with what seems to be a Windows Update absolutely unrelated to C++ security two days ago.  But it could be a complete diversion.

  Any ideas?  I'm reaching the end of my tether here.

  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
   
   
  --
  ..
  --
  "r3dh3d" wrote in message news: 04e82bbf-458f-48 CF-86e7-6a39480a4a9f...
  > Running Vista HP, sp 2.
  >
  > Firewall on the router & McAfee.
  >
  > Automatic windows updates WE
  >
  >
  >
  > In the last two days, I get "windows Explorer has."
  "> has stopped working" pretty constantly. Not the kind of endless loop, just
  > everytime I try to use it, it will give the errmsg, close, claim that it is
  > restart and fail to do so.
  >
  > I had a scout quick tour here and tried all solutions the
  > obvious:
  >
  > 1) run the checker of the filesystem (found nothing)
  >
  (> 2) run chkdsk (found nothing)
  >
  (> 3) installed and run anti-malware (Nothing found)
  >
  (> 4) turned off the display of thumbnails (past again)
  >
  (> 5) started in SafeMode (past again)
  >
  >
  >
  > Fwiw a few other applications have the same problem, for example Adobe Acrobat
  > will crash all trying to save a file, to the point where it is
  > View folders. And Acrobat and Explorer Windows is
  > crashing if you try to display all drives on the computer.
  > So if you start US at a lower level, in 'my documents' that's fine with
  > what it shows you. If you then scroll down to the bottom in 'computer' and click
  > to develop, this is the point where it crashes.
  >
  > However, other applications (such as Word) can access and save items to this level, for example
  > Can I save a word doc on my phone as another drive of the word itself.
  > Although if I tried to slide anywhere in US it would have crashed before I
  > couldn't even see the phone was there.
  >
  > My hunch is it started with what seems like two days a
  > totally unrelated to Windows update for the security of C++. But it could be a
  > complete red herring.
  >
  > Any ideas? I'm reaching the end of my tether here.
  >
   
   

• Start a new game in Fallout 3 (fallout 3 has stopped working) help!

  I have windows 7 Home Edition premium, I just downloaded fallout 3 out of gamestop. I was happy to play so I booted up and when I start a new game it goes to the loading each time, screen and then hangs. It is for me a window saying fallout 3 has stopped working... I would appreciate an answer I'd like to play this game.

  Hey everybody.  It took me awhile to find the answer to this one.  Recently, I upgraded my laptop older to a new 64 bit Windows 7 OS kernel based Dell I7.  I reinstalled my copy of the edition of Fallout 3 GOY, and it would crash at startup, as soon as I clicked on 'new game '.  Finally after reading hundreds of posts on Fallout 3 crash, I came across this video which showed me the you tube fix. http://www.YouTube.com/watch?v=4GN5HbMsMVE  Basically, the original Fallout 3 (Fallout 3 GOY edition and) does not contain the d3d9.dll file in the directory of Fallout 3.  Download this dll and put it in the directory of Fallout 3 corrected it for me instantly.

  I hope that helps!

• "License for this product has stopped working" - help

  I use Adobe Dreamweaver CS3 for Mac OS X. Last week my computer crashed. I now have a new hard drive, and most of my data was restored.

  However, when I try to run Dreamweaver I get a message: "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product... »

  Perhaps foolishly, I had never bypassed to the recording of Dreamweaver (despite periodic reminders), even if I use a legal copy, bought in the store with its own serial number, and I guess that's the reason why I now get this message.

  I'm not a computer whizz-kid and nervous about what to do next, as I would not lose data or parameters.

  Exactly how do we uninstall Dreamweaver? And when I reinstall I'm still currently having all my existing sites intact, as they were before?

  Any guidance would be most welcome.

  Thank you.

  Dreamweaver CS3 uses the old system of licenses, which really blows. Licensing for CS3 applications on my computer stopped working several times, and each time, it is a task to an hour to get it up and running again.

  You will need to download the licensing repair utility for your system (Windows or Macintosh).

  Delete / {boot disk Volume} / Library/Preferences/FLEXnet Publisher, via the operating system or the Terminal.

  Run the "LicenseRecoveryLauncher" script provided by Adobe. When the opportunity to work normally (entry) or remove (0), press ENTER to run normally.

  Reactivate your software.

  You will need your serial number of product very convenient.