Dell casting need help

Similar Questions

• have dell dimension 4700 xp need help with outlook express I have error message and can not send email

  I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

  Thank you, Gina Davis

  I have

  He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

  How to add your Hotmail e-mail account to Microsoft Outlook Express
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

  If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

• (Redirected) need help to order my new computer dell laptop

  I'm approved for funding threw dell but I have a few questions, any help would be very apreciative. I spend a lot of time on my gateway with windows xp and it has to go.  I flip around the internet, google things, check email, look to the top of things I have to buy, play slots and have my zune account. I just bought a canon mx472 4 in 1 that I'm not good with. I did some reading on Dells website, but I need help. I looked a little, but I need to choose options. I don't think I want a touch sreen. ??? the inspiron 15 has aexternal optical drive, not what it is? He didn't say what CPU, some said mid-range perhaps i5 may be good for me? 4 GB of ram and 500 GB hard drive is right for me? my new printer requires windows8 - 8, 1-7 - 7sp1 - vista sp1 - vista sp2 and windows xp sp3 32-bit. I don't I have xp and got a few things to work but not completely. my system may even not be 32 bit? calls also for an interface high speed USB. IM thinking only of connect. It is wifi ready. solid state drive makes the difference? Thanks in advance pinehillian

  Hi pinehillian,

  Please repost this in the laptop computer forum for more experts.

  http://en.community.Dell.com/support-forums/laptop/

• Need help installing replcaement motherboard for Dell E521. ! Help, please!

  Hello to all who can help you!   IM desprate need help to install my replacement motherboard. the original died after a bios udate. but I have no guarantee. I already served $ 130 for the replacement. I don't know my way around the motherboard, but I'm no expert. and I've never updated the whole motherboard. so, if someone canhelp. Give me a walk through or something. It would be grat! Thanks to anyone who can help! to have a Dell technician install it would cost about $130 I think. :(c'est 260 $ pour une carte mère de remplacement (pas nouveau im sûr que juste un refurb))

  
  

• Need help... New office which does not recognize the IP address

  I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

  I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

• Need help: impossible update IE and Vista - error _80070246 WindowsUpdate_dt000

  I am Brazilian, using a Dell Inspiron 1525 with Vista Home Premium.
  Need help with Windows Update (since June, I just can't do the update for IE7 - use now - and can't update to IE8). All other updates ok, instaled. But with both apears 'error' as this = "WindowsUpdate_80070246" "WindowsUpdate_dt000" - and says it's a mistake not recognized Windows Update.rsrsrsrs
  The same thing for Service Pack 2 KB948465 - failed... Troubleshooting!

  Penny Brasil e uso Dell 1525 com Home Premium.
  Ajuda com o Windows Update, pq desde preciso an atualizacao junho I can not driver IE8 browser o; "por isso desinstalei o IE8, following os passos do Microsoft site, e voltei anterior ao, IE 7 error-mas as 2 atualizacoes, para o IE7 e an instalacao (of novo) IE8 falham - code WindowsUpdate_80070246" "WindowsUpdate_dt000" Usava o NIS2008 (firewall, antivirus e) e troquei em julho pelo NIS2009, sempre updated e ativo.
  O updated Service Pack2 KB948465 falha also ate agora. As atualizacoes ocorreram demais e ocorrem usually (ok).
  NAO sei o pode estar explain.
  Agradea§o any ajuda.

  Hi Gik09,

  Thank you for visiting Windows Vista Microsoft answers forum.

  This problem occurs if the GlobalInstallOrder.xml file is damaged. The GlobalInstallOrder.xml file is in the following location:
  %Windir%\Winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\GlobalInstallOrder.XML

  To resolve this problem, please follow the steps mentioned in the link to the following Article:
  http://support.Microsoft.com/kb/942968

  Please let us know if it helps.

  Thank you and best regards,
  David

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• Windows 8.1 annihilated all win, Pro 7. CANCEL the need help!

  Reference Dell Inspiration 3847

  First, I created a new partition and thought that when I pick up the Windows 8.1 since the disc that came with the new computer, it would be a side-by-side, double installation along the side of the factory, preinstalled, Windows 7 Pro. EVIL!

  What has happened is that it exceeds written Win. 7 pro. and remove all it's files and preloaded apps.
  I sent to Dell to see if I can return to the configuration factory state condition with the Win 7 Pro. and applications pre installed. but have not yet received a response.
  I, ve tried restoring to factory State, but she is instructing me to reinstall Win. 8.1 from the disk.
  NEED HELP!
  Thanks Randy

  You should have the recovery with Dell backup and restore support before making a dual boot. Even if he succeeded he would have hindered your ability to restore to the original image.

  You cannot reinstall Windows 7 because Microsoft has removed all downloads of Digital River and replace them with a non-functional tool that licenses OEM Dell blocks and you cannot create a support of recovery, your only choice is to call Technical Support Dell or Windows 8.1 installs successfully.

• Need help with the error in windows update 80244019 is urgent please

  Please I need help urgent problem error update.

  I have a Dell Inspiron 1564, running Service Pack 1 of Windows 7.   I tried several times to update windows and nothing, just appears this error: Code 80244019, tried to install the Windows update agent and pops up the same error., NetFxRepair tool and nothing, FixDotNet, and nothing.  Did a recovery to the fabric (by default) and nothing.   About 2 years ago, I disabled the update and about 2 months ago I tried to update and I forgot the error. Now I need to reinstall all my programs, in the hope that with a recovery, it will fix the error and thrust my laptop, but now is worse, because the installation of updated doesn´t work, Corel Draw X 4 doesn´t supposed error of .NET Framework, so I tried the fixdotnet and netfx repair tool, but nothing. I need to work and I have can´t I have only a portable empty with an outdated windows. Help, please!

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  or

  Cannot install updates in Windows...
  http://support.Microsoft.com/kb/2509997

• Need help finding the model number

  Hello

  I have a dell monitor, but what is on the tag is:
  CN0RW1957287282M0HMS
  Rev a01
  I need help so I can get a replacement for it power button Board.

  Thank you

  CN0RW1957287282M0HMS

  Dell RW195 part number = E198WFPF

  Search spare parts on eBay or these 3rd party repair sites and see if they sell components to monitor and have the internal documents of troubleshooting:
  http://www.lcdrepair.com/

  http://www.shopjimmy.com/Dell

• Need help with setting up in checkbox in interactive reports

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

  Do I need to configure anything else

  Aditya Gupta wrote:

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  instead of the checkbox

  Do I need to configure anything else

  This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).

  
  

  Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

• Need HELP to get this shadow effect

  Hi all

  I need your advice. Sorry I don't know the name of this effect below therefore the scene I need help

  A man holds a flashlight illuminating a girl in the front (she is a bit away from him in an open field), now the shadow of another person walks between the torch and the girl. The shadow is being cast from left to the right end of the frame, falling on the girl, too, as it moves.

  How to achieve this effect in the aftermath.

  It may or may not be a question of amateur, but any help would be so useful.

  Please notify

  It is now much clearer. you need advice VFX before your shoot. You must have a shadow without the man, be there. I think you can go 2-way with this: shoot twice the place or go to the green screen approach. each with its own complexity and the advantages and disadvantages. I will describe the basic principles:

  Approach to location

  If you want to try to do on-site, you can:

  1. turn your scene with the man and shadow

  2. pull on the same stage without human and shadow

  3 mask man with the rotoscoping and tracking

  This might work if you have no movement in your scene. or if you have motion control of drilling that will exactly twice the same movement.

  The green screen approach

  your question - if you can touch a person out and make him a shadow on the floor - YES. It's the way I'm going to try to do - it's called a Shadow Catcher - a layer that only accepts your shadow. This might work with or without movement of the camera.

  Let's say you have this guy on green screen

  

  and you want to just its shadow on the background against

  

  Here are the steps:

  1 make the guy (layer locked) 3D and add a corresponding upstairs floor * in the actual shooting.

  floor - add you a solid, it make 3D, add the effect of grid and position it accordingly with a camera of 2 knot like that of setting

  

  2. Add a layer of light points and set the shadow, set the images captured in the shade and the soil layer to accept shadow - only and adjust the light

  

  Now you have this:

  

  3. check that everything is OK, now define the images captured in shadow - only

  

  Now you have just the shadow. You can adjust it to your taste with the darkness of the shadow and the diffusion in the properties of light spots

• Need help to turn off (?)

  I had 6 Lightroom installed/activated/registered on a Dell desktop computer. A few months ago, the motherboard has failed, and Dell repaired under warranty, so I now have the same rear machine. However by doing the repair work they also reinstalled Windows and erase everything on the hard drive, despite my statement is not to touch the hard drive. So now I have to reinstall all my programs, including 6 of Lightroom. I downloaded LR6 and enter the serial number, but an error message informs that the serial number is already registered - what is correct. I need to somehow disable the program and turn it back on? With the program is no longer on the hard drive, I don't know how to disable. Or is there another procedure to use? Thanks for any help you can provide.

  
  

  Best, Ted

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

  request a reset of count of activation.

• Need help understanding syntax

  Hello
  I need help to understand the syntax.

   
  PPRAMImpl am = (PPRAMImpl)pageContext.getApplicationModule(webBean); 

  What is PPARAMImpl?
  
  I know 'am' is a variable. And with pageContext.getApplicationModule (webBean), we try to get the name of AM for this page, then why do we need to add (PPARAMImpl) (webBean) pageContext.getApplicationModule before?
  

   
  For example in plsql , apps.testpkg.mainproc(param1,param2) 
  means 
  schema.packagename.procedurename(parameter1,parameter2). 
  
  So can you explain "PPRAMImpl am = (PPRAMImpl)pageContext.getApplicationModule(webBean)" in that manner? 

   
  pageContext.getParameter(EVENT_PARAM)) 
  
  What is this ? 
  What are the possible values for EVENT_PARAM ? 

  And by the way, I need help on setting a default value for any of my search parameters in a search box.
  Correct me if I'm wrong, that's what I thought
  1 EOImpl have setters and getters for this attribute. So call to the setter in controller and set value, if this is right, then I don't know how to right the code, can you give me some example code?
  or
  2. get the name of the view object, then set the value for it. as viewobject.setattribute (' name of att ', att value'), if this is right, then I don't know how the code right, you can give me a code example?
  
  Thank you
  Sri.

  Hello

  N ° EC are not equal.

  pageContext.getApplicationModule (webBean) return type AM OAApplicationModule.

  It would be nice if your am variable is of type OAApplicationModule:
  OAApplicationModule m = pageContext.getApplicationModule (webBean) / / would be nice.

  But as you use type PPRAMImpl, you need to type-casting that externally by using:
  Am = (PPRAMImpl) pageContext.getApplicationModule (webBean) PPRAMImpl;

  If you are not yet clear, then consult any book of java or google for internal & external type in java cast.

  Sushant-