Dell Dimension 2350 HDD Upgrade

Similar Questions

• No sound after reformatting on Dell Dimension 2350 XP SP3

  Only, I went to read an mp3 file after reformatting last week and got this: "Media Player cannot play the file because there is a problem with the audio device". My multimedia audio controller, Device Manager has a yellow question mark and a code 28 by the bit of General properties. It's a Dell Dimension 2350 with SP3. Just let the Hardware Wizard find the driver for me?

  http://www.Dell.com/support/drivers/ca/en/cadhs1

  Click on the link above, all your system drivers are here.

  Expand the Audio, there is only one pilot, click on download, note when you save the file in.

  Double-click the file to install the driver.

  Save the link above if you need others.

  If you have the CD Drivers and Utilities provided with the system, the drivers are on the CD.

  Yes, you can leave the installer for you, also Windows Update installs for you, but it is preferable to install yourself, Windows makes mistakes!

• Installing drivers after Windows XP reinstall on Dell Dimension 2350 with Dell resource disk

  Hi all

  Recently, I did a clean reinstall of Windows XP (home edition) on my Dell Dimension 2350. Everything went well. Now, I need to install the appropriate drivers. I have the Dell resource disk and this is where the problem starts.
  As noted elsewhere, after reinstallation of that display on the screen of the disk resource is as it is in 'Safe Mode '. I was aware of this. Therefore, the search criteria screen resources drive was a little bigger than the screen of the monitor. I managed to its size to fit the screen, but this really isn't the problem, is the following: the search criteria options I have in the dropdown menus (on screen) are the following:

  System model: all, DXC061, DXP0G1 Dimension, Dimension E521, DM061, Dimension C521, XPS710 (who, if necessary, to choose?)

  Operating system: (I think I got this one) all, Windows XP

  Topic: (maybe this one too), Dell Diagnostics, Diagnostics, drivers, Applications, utilities

  For the life of me I can't understand the correct drivers, I am to install *. Windows XP appears in the menu of the operating system. I know enough about the order of installation, but as I said, I'm a little confused on the selection of the drivers from the disc. This computer is not connected to the internet at the moment so I can't download and use any kind of pilot program. Other research have confused me more far and provided no precise answer to this problem.
  If anyone can enlighten me on the solution step by step to this (I think "Dell resource disk for Dummies"), I would be extremely grateful.

  Thank you all!

  Zlek1207
   
  * If it will help, I went in (with "Show Hidden Files" active) Device Manager and it shows (with the yellow question mark) are:
  Other devices: Ethernet Controller, multimedia Audio Controller, video controller (VGA Compatible).

    

  You need, in the order of installation:

  1. Driver Chipset
  2. Video driver (depends on what video card)
  3. Audio driver
  4. Network driver (depends on who you are)
  5. Modem driver, if you are using a modem

  Go to the Support page and put in your Service tag. He expected to give you the drivers you need. You can download them to any PC and copy it to a USB key for installation on 2350.

  You only need applications, if you actually use them (for example, Roxio, Jasc Paintshop, etc.).

  Then install your antiviral software and get in line on the Microsoft Update site for all patches and updates.

  Please keep in mind that XP is no longer supported by Microsoft, and they stopped release of the security fixes for XP and IE9, more than 1 year. So they're all two full of security holes and put your data personal in danger.

  UNDER THE DIRECTION

• Dell Dimension 9200 MAX UPGRADE

  As you can tell a Dell Dimension 9200 is a bit old this generation of computers, but I want max to upgrade my PC and my calculations, when I update this baby to the max, it could perhaps better than PCs today, so most important first question:

  1: can I upgrade my power supply? My current diet only 350w, I am able to pass this to 500w by installing a new? Is it possible to install a new power supply on my PC again? If so, which company is the most reliable?

  Thank you for your help, once this question is answered, I think my PC will be a match munching PC

  Azee123

  Yes, the power supply can be improved to a 500w unit +.

  The Dimension 9200 does not use an exclusive power of Dell, you can install most power supply ATX with a power connector 24 pin or 20 + 4 pin main motherboard and this can be purchased in most local computer stores, or online.

  The 9200 has a rear panel open, a diet with or without the on/off switch can be installed.

  Note: You need a PSU with six SATA power connectors.

  When you buy a power supply, check the manufacturer's warranty, plus better, look for one with a minimum of three years.  Personally, I prefer the Corsair PSU.

  http://www.Newegg.com/power-supplies/subcategory/ID-58

  Bev.

• Dell dimension 5150 Cpu Upgrade help?

  Hi, I have a dell dimension 5150 3 GB of ram I currently am all an Intel Pentium d 2.8 ghz (LGA 775), and I was wondering what is the best upgrade can take my motherboard 0HJ054. Full specifications below.

  -Plug-

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 161.2

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 2

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Core 1
  -0-1 wire

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 2)
  Number of threads 2 (max 2)
  Name Intel Pentium D 820
  Codename SmithField
  Specification Intel (r) Pentium (r) D CPU 2 .80GHz
  Package (platform ID) Socket LGA 775 (0x4)
  CPUID 4.7
  F.4 extended CPUID
  Core Stepping B0
  90 nm technology
  Basic speed 2796,3 MHz
  X FSB multiplier 14.0 x 199,7 MHz
  798,9 MHz rated Bus speed
  Stock frequency of 2800 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, EM64T
  Data L1 cache 2 x 16 KB, size 8-way line set associative, 64 bytes
  Hidden trace Kuops 2 x 12, 8-way set associative
  L2 cache 2 x 1024 KB, size 8-way line set associative, 64 bytes
  FID/VID control not

  Chipset
  -------------------------------------------------------------------------

  Model of motherboard 0HJ054
  Northbridge Intel i945P/PL/G/GZ Rev A2
  Southbridge Intel 82801GB (ICH7/R) Rev A1
  Memory type DDR2
  Memory size 3072 MB
  Double channels
  Frequency memory 266,3 MHz (3:4)
  Latency CASE # (CL) 4.0
  # For CASE # delay (tRCD) RAS 4
  RAS # Precharge (tRP) 4
  Cycle Time (tRAS) 12
  (TRC) Bank Cycle time 16
  Base address e/s MCHBAR 0x0FEDA0000
  E/s MCHBAR size 4096

  Memory SPD
  -------------------------------------------------------------------------

  DIMM # 1
  SMBus address 0 x 50
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 1153079D
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 2
  SMBus address 0 x 51
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  DIMM # 3
  SMBus address 0 x 52
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 5954079C
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 4
  SMBus address 0 x 53
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  Mike 5150

  Next post should help,

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19436963/20053889.aspx#20053889

  Before installing the processor, verify that the version of the BIOS A05 or higner is installed, when support for the latest processors has been added.

  Bev.

• Dell Dimension 8200 Memory Upgrade after upgrade the processor

  Hello

  I have a Dell Dimension 8200 (shipping date is 01/05/2002) which came with a FSB of 400. I've recently updated the its origianl 1.8 GHz a 2.4 GHz processor.  I understand that the 8200 with a FSB of 400 can use 800-40ns or 800-45ns memory sticks (I think that mine came with 800-45).  I intend to upgrade memory 1 GB to 4 X 512 (2GB), I installed (4 X 256).  My question is when I went to buy the 4 X 512 memory, said the pub, it could be used in a 8200 with a 2.1 GHz CPU or less.  I have a 2.4 GHz chip. Is that going to be a problem?

  Rbatleman,

  Great question!  When the Dimension 8200 was released the processor speed max was 2.1 ghz (probably why the memory you were viewing had this label).   We have updated later to the processor 2.4 ghz when it was available.  The two units came with the PC800-45 (400 mhz) memory, you should run into any problems with this memory.  Keep in mind the system supports only the RIMM modules that contain devices memory of 4, 8 or 16.  I hope this helps!

  -Andrew

• Dell Dimension 2400 RAM upgrade

  I've recently updated my memory on my Dell Dimension 2400 512 MB to 2 GB (entirely new memory sticks) and when I try to start my computer I get a series of loud beeps and no video input. I tried the stick at a time and I re installed to ensure that them have been installed correctly. Any advice would be greatly appreciated.

  System specs

  processor Pentium 4 2.5 ghz

  512 MB nVidia gt610 graphic

  512 MB of RAM

  Hi orcacros,

  Welcome to the community.

  Please let me know the specification of the new memory sticks. If you bought this online store, please give the link.

  It's starting with the old memory stick?

  If it is booting with the old memory stick, please update the BIOS by clicking on the link below:

  http://Dell.to/XBFOGw

  Dell Dimension 2400 will take care of the modules of memory 266 MHz or 333 MHz. Modules of DDR 200 MHz speed are not supported.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Dell dimension e520 Motherboard upgrade

  Hi, I have a Dell Dimension E520 and I was wondering if it takes care of all new mothers of dell. Thanks for your help.

  hunterp15

  There is no motherboards, other than a Dell e520 OEM motherboard that will fit the owner e520 EOL BTX chassis, or y at - it available BTX retail motherboards.

  The Dimension e520 is the latest model of this series, Dell made.

  Only 65 processors with 800 or 1066fsb will work with the E-520.

  The Q6700 should work, but before installing the processor, make sure you have BIOS version 2.2.1 [or more] installed, when additional CPU support has been added.
     
  Bev.

• Dell dimension e510 CPU upgrade

  Almost 2 years ago, I bought a dell dimension e510 with the pentium d 820 installed processor desktop computer but now I want to put the best processor in it it may take. I did some research and discovered it might support only the pentium d, pentium 4 hyperthreading w and that the pentium d 960 was supposed to be the best pentium d processor available. I bought a

  now heres where the problem begins: I put it in (radiator and all), but when I plugged it in, the power of computers led turns orange and nothing happens; No start, display, diagnostic lights or a message saying incompatible processor. I put the back of 820 to and it worked fine but the same 960 post custom. I thought that maybe the processor could be bad, so I sent it back, but the seller (seller ebay w / 99% positive feedback) says that it worked fine when he tested and it sends to me.

  I would like to know if anyone knows why it might not work, I need a different version of the card mother e510, make, it would be inconsistent, or I need to do something special (like asking dell for permission?)

  According to everest, my motherboard is 0HJ054, a07 bios revision. any ideas?

  
  

• Dell Dimension C521 CPU Upgrade

  Hi all. I have a Dimension C521 (feat) and I would like my CPU from a AMD Sempron (TM) Processor 3400 + ~1.8GHz to an AMD Athlon 64 X 2 6000 3.0 GHz 2 MB socket AM2 89W ADA6000IAA6CZ. But I'm not sure about a few things, that's why I'm here. I would like to know:

  • If the AMD Athlon 64 6000 works with my computer of x 2
  • What is the recommended BIOS
  • If the fan the C521 comes with is good enough to keep it cool
  • If a 280W 955.39BTU / h Maximum PSU is fine
  • If you have any questions = D

  Here is the owner's manual, if it'll help - ftp://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-c521_owner ' s%20manual_en-us.pdf

  Also, if I had to update my GPU, what would you recommend?

  xXEblisXx

  The Athlon 64 X 2 6000 + 3.0 Ghz, 89W Windsor, will work.

  Before installing the processor, make sure you have the latest version of the BIOS version installed 1.1.11, with BIOS version 1.1.4 support AMD has been added.

  The default fan and the PSU should be fine.

  Bev.

• Dell Dimension B110: Memory upgrade problem

  I have problems with my upgrade memory. I bought a few 1GBX2 2 GB of memory, and I know that my computer can take because I had done the research before I bought the memory. But with I put memory he doesn't recognize her, it's like id I have no memory what so ever in the machine. I was wondering if there was something that I'm supposed to do or change to get the ram to read. It takes PC-3200 RAM type.

  And another thing... I have 512 MB of RAM, but he acknowledges as 504 MB of RAM... Any reason why it's like that?

  Specifications of the computer:

  Microsoft Windows XP
  Professional
  Version 2002
  Service Pack 3

  Intel [R]
  Celeron (R) CPU 2.53 GHz
  512 MB of RAM

  
  

• Dell Dimension E520 CPU Upgrade

  Hi, I upgraded my CPU because it is too slow, and that I am I going to pay $ 80 instead of the usual price of $250. I would like to know if they are compatible with my system. All the I know is that they have the same type of socket (LGA 775). Here is the link: http://www.newegg.ca/Product/Product.aspx?Item=N82E16819115060CVF

  Here's my current computer specs: 4 GB RAM DDR2 1 GB GDDR5 128 bit AMD video card, 1.86Ghz Intel core 2 duo CPU (valued at 3.33 Ghz) and a 305 power w.

  If I need to change the power supply, I would love to know because I have one here that's 750w I could also use. Thank you.

  Daren

  * P.S: I know I need to update my BIOS because I am currently at version 2.2.1 and the most recent is 2.2.4 (or something like that) should I just brings it to someone to do it for me, or is it easy to update? I don't know where to find them, so if someone could possibly direct me, I BIOS Phoenix technologies.

  Thanks a lot again!

  DarenDussault

  The Core 2 Quad Q9505 Yorkfield 2.83 GHz LGA775 95W shown in your link is not compatible with the e520.

  All Socket LGA 775 processors, listed HERE are compatible.

  There should be no need to improve the power supply for a processor upgrade.

  Bev.

• Have Dell Dimension 2350 with windows XP computer recognizes the CD/DVD-rom drives but won't play CDs or DVDs

  Problem started with a code 39 error code when cumputer did not recognize the readers of CD rom. cure the problem of recognition, but still cannot read any DVD or CD should I replace the disk driver

  If AZEEZ N article did not help you, then try to reinstall the drivers.

  I had the same problem - the computer showed cd/dvd players, but he has not read cd'dvd. I showed it to a computer repair man and he said if reinstalling drivers does not help, then this means that there is a hardware problem and you will need to purchase a new cd/dvd-rom...
  I bought a new drive and now the problem is gone!

• dimension 2350

  I have a Dell dimension 2350 that I would like to upgrade the processor for. I would like to know that I can use.

  
  

• Can upgrade you Dell Dimension 4400 to Vista/WIN7

  Can upgrade you Dell Dimension 4400 in Vista/WIN7?

  Meet the system requirements? If Yes, you can purchase Windows 7. If not, stick with XP.

  Windows 7 system requirements

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • Graphical device DirectX 9 with WDDM 1.0 or higher driver

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/