Dell files and USB Flash drive

Similar Questions

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Question about creating a recovery (file system) USB flash drive

  Hello and happy new year to all, (I'm from greeece, sorry for the mistakes of language possible)

  (Pavilion dv6-6c01ev - Windows 7 Home Premium 64-bit - bought 08-21-12)

  I want to create a USB stick recovery, and I just bought a USB flash drive 32 GB 3.0 for this reason.

  I've never done it before, but I have read how, according to the this page.

   

  My question is:

  What file system must be the USB key, before the decision-making process? FAT32 or NTFS ?

  Bought, thati USB file system is FAT32 by default.

  I already read that on the page above: 'a message of Recovery Manager opens indicating that the flash drive will be formatted. Click OK to format the USB key and continue. »

  but I would like to have, and a more definite answer from someone who knows better.
  

  So, does change the NTFS file system.

  or should I now start the manufacturing process of the recovery USB flash drive as it is (FAT32)

  Thank you for your help

   

   

  I have already created the recovery USB flash drive, and formatted Recovery Manager the disk before the process,

  and at the end, when the recovery files was written and verifyed.

  I look at the file system of the USB flash drive, and it's NTFS...

  I worried for nothing...

  Thans anyway...

• x 61 does not start from usb flash drive

  I don't know that I did several times before, but for some reason any my x 61 does not allow me to boot to a usb flash drive, I use normally to install the operating system.

  Any suggestions what might be wrong and what I could do about it?

  I should mention that USB is enabled in the BIOS and usb flash drive install works on other computers.

  Update seems to be an incompatibility with wintoflash, I used the Microsoft DVD/USB tool and it starts the flash player and finished the installation. Strangely the wintoflash installation worked fine in a HP dv3000.

  Consider this resolved.

  Wow I never saw your post until that earlier.

  Situation is resolved in the first post

• Satellite L675 - 11 H - cannot access and/or played on USB flash drive files

  Hi all

  I recently bought a Toshiba Satellite L675 - 11H and tried to transfer files from a USB Pendrive on my hard drive from Toshiba. The files were already transferred from my old laptop (HP - XP) on my USB flash drive.

  Unable to access the USB flash drive to any of the USB ports that I connect my new laptop flash drive. What could be the problem here? Thank you for your help or tips!

  Hey Rush,

  Can you post more detailes about this behavior? What happens if you connect your laptop HARD drive, you don't see that Windows installs the drivers for the new USB device or do you have an error message? If you have connected the USB check of Windows disk management if she s recognized there (Control Panel > system and security > administrative tools).

  Have you tried other USB devices such as USB mice? If they don t work too the problem might be connected to the USB ports. In this case, you must delete all the USB ports on the Device Manager and restart your laptop. Also the chipset driver update might help.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• How can I download mp3 to blogsites and transfer files to the flash drive. ?

  Hello

  I visit various blogsites where music albums are available for download in mp3 format.

  When I download an album where he's going. ??

  Most of the files must also be extracted using WIN. RAR in mp3 format. (I do now with my windows pc)

  How this can be completed in waves apple ipad 2.

  Do I need to add specific applications to complete the download and extraction.

  I suppose that if I get this day won't be a problem transfer a file to a connected flash drive.

  Hope someone can help me because I am considering buying an imac as my windows pc is not future pick-up.

  Best regards

  Alan

  alanfrombarrow-in-furness wrote:

  When I download an album where he's going. ??

  Nowhere else. Safari will download the mp3 on itself for reading, but it will store not anywhere for later use.

  alanfrombarrow-in-furness wrote:

  Most of the files must also be extracted using WIN. RAR in mp3 format. (I do now with my windows pc)

  How this can be completed in waves apple ipad 2.

  on an iPad, you need to get an App that can handle RAR archives.  iZip did this:

  https://iTunes.Apple.com/en/app/IZIP-zip-unzip-unRAR-tool/id413971331?Mt=8

  alanfrombarrow-in-furness wrote:

  I suppose that if I get this day won't be a problem transfer a file to a connected flash drive.

  It will be a problem from an iPad. iPads may write directly to the USB flash drives.

  alanfrombarrow-in-furness wrote:

  Hope someone can help me because I am considering buying an imac as my windows pc is not future pick-up.

  What that has to do with an iPad?    iMacs are very different from iPads.   Everything you can do on a Windows computer, you can do on an iMac, a bit like you do on Windows. This is not the case with an iPad.

• Music and videos on USB Flash drive Xoom2

  I can listen to music and watch videos on my Xoom2 via Wi - Fi from my computer, but when I try the same music or videos from a USB Flash drive, I can see all the files, but when I try to play any of them the Xoom2 go to "settings". Someone at - it an answer to the prayer of the problem.

  Jeff W

  I had a similar problem when you try to view the div - x movies from a USB key. I downloaded mx video player and can play now without problem

• cRIO: build the path to write tdms file on a USB flash drive

  I wrote the code in figure 1 below, for open & create a file tdms on my USB flash drive that is plugged into the USB cRIO.

  The added path tdms is shown in figure 2 below.

  But I get the error in figure 3 below. I wonder how I can solve this problem.

  

  

  

  Cashany,

  Make sure that the USB is formatted in FAT32 as the cRIO cannot mount NTSF or other file systems.

  In addition, and this is potentially very important:

  There is a known memory leak problem that is easy to avoid the code with the help of PDM on the cRIO (without code changes!).

  This problem only occurs on vxWORKS targets (e.g., cRIO-9014), not on the PharLap targets (as I know).

  The problem occurs when you close a PDM file reference, the vxWORKS OS can't properly unload the PDM library. Next time you open a PDM, the library reference is loaded again, if for a very long time you will run out of memory.

  The solution is very simple:

  on your cRIO, locate the file or - rt.ini, then scroll down to the section [LVRT] of the ini file and locate the key called "StartupDlls".

  Make sure 'tdms.out' is included. For example, according to your cRIO, it may look like this:

  StartupDlls = nisysrpc.out; NiRioRpc.out; NiViSrvr.out;

  In this case, you would change the line to look like this:

  StartupDlls = nisysrpc.out; NiRioRpc.out; NiViSrvr.out; TDMS.out;

   

  This will prevent the LabVIEW runtime on the cRIO trying to unload the PDM library, forcing to be in memory of start up to eternity. This avoids the memory leak that you would otherwise experience.

  Good luck!

  Q

• What is the best method to add data to a file stored on a usb flash drive to avoid too many write cycles?

  Hello

  I'm trying to store an important data on a cRIO sampled stream in the USB flash drive.

  I believe that there are two ways to add data to a file:

  1. open the file outside of the loop, then write to the file loop, then close the file outside the loop.

  Pros; More quickly and efficiently than the opening and closing of files in a loop is resource heavy equipment.

  Disadvantages; If the program fails partially through, all data is lost.

  2. open the file, write to the file and close the file, all in the loop.

  With the advantages and disadvantages as opposed to option 1.

  As my cRIO is finally deployed in a hostile environment and data are valuable and processing speed is not an issue of concern in this project, I'm leaning towards option 2, but after a few basic calculations that I realize that I'll be writing/opening/closing the file of thousands of times and I wanted to know if this will wear out the flash memory?

  My uncertainty is due to not understanding what happens when a file is opened written to and closed.  He writes the new data to new areas of the flash, or it write all data on top?  The latter would cause me problems not too long term!

  Any help gratefully received.

  A big thank you and best regards,

  Ed

  The 'magic' is not in the File Format (PDM vs vs binary text), but in the "life" of the file.  This solution creates a file of 24 hours and maintains a different file for each day.  If the USB "dies", you lose everything you have not backed up somewhere.  If the program dies (or errors), you lose the data for the current day.  You end up with multiple files (which can be a more or less), but we must still make the trade-off between (duration) of the file and the file number opens (which relates to your concern for the longevity of the USB).  By the way, I suspect that a good quality USB key (it's what you mean, right?  Or do you mean a hard drive USB powered?  Comments probably apply both) can predict today to not die on you, everything just because you make a lot of reads/writes (of course, you could get in-a-thousand...).

  Bob Schor

• How you can transfer a file of music like iTunes or Spotify on a usb flash drive?

  I would like to listen to my music from Spotify and Itune on my Samsung HDTV system which has an application for a USB key, but I can't download the file to my USB Flash drive. What should I do?

  I would like to listen to my music from Spotify and Itune on my Samsung HDTV system which has an application for a USB key, but I can't download the file to my USB Flash drive. What should I do?

  Make a read here: -.

  https://discussions.Apple.com/thread/3631435?start=0&TSTART=0

• Dane-elec 4GB USB flash drive is asking to format. I have the file there that I can't access.

  I transferred files from my Tablet Toshiba thrive on a flash drive USB of Dane-Elec 4 GB. It appeared to work for a few weeks, but now it does not work on the tablet or on my laptop (HP dv7). On the laptop, it says that it needs to be formatted. This habit to delete my files?  On the Tablet, it cannot be mounted.  I need these files. What can I do?

  Hello

  Formatting the drive Flash will clear all data located on it.

  As a work around, I suggest you to copy the files from the flash drive to another computer where it works fine and then format the flash drive and check.

  You can also check your hard drive to find errors in windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: All performing hard disk the disk check if bad sectors are found on the disk hard disk check is trying to repair this area if all available on which data may be lost.

• How can I recover the files from my USB Flash drive before it will be deleted?

  My USB Flash drive has files on it from another computer and only the files that have been stored on the flash drive which cannot be recreated. How can I recover the files? The Flash Player is telling me that it must be reformatted and the files will be deleted. It's two computers I use. Help, please

  Hello

  Looks like it might be a problem with the flash player.

  Step 1: Try to use the USB stick on another computer or a different USB port.

• Windows Explorer stops working whenever I have connect a USB flash drive and try to access

  Hello. I use Windows Vista.

  I had a particular problem. Whenever I have plug in a USB key and try and access it, I get a pop saying "Windows Explorer has stopped working." the file is closed. If I wait a long time (i.e. 10 seconds), I might be able to get into the drive without any problems, but even when there is no guarantee. The problem persists in each USB slot I use. In addition, it is not that the computer is not able to detect it. It can detect and identify that it is a USB flash drive. It's just that whenever I try to access (or the folders inside the flash player), windows Explorer stops working and restarts.

  Does anyone have this problem before? And any help is appreciated. Thank you.

  The mistake made reference the MSVCR80.dll, which is a Microsoft file, but it may be another third party file, causing the problem.

  DivX is installed?

  If so, can you uninstall DivX and see if the error resolves.

• Important files are not available on a USB flash drive

  I copied the 8 GB of files on a USB flash drive and checked that the files were indeed on the flash drive before you delete them from my hard drive.  When later, I tried to access these files, no files were listed and properties indicated that all 8GB has been used.  Formatting the flash drive is not an option.  I need those files!

  Hello

  try this program to find your missing files: RECUVA

  You can use it to find the 'deleted' on your hard drive, files that are not deleted. They stay there until they are crushed.

  Flash Player for them as well equipped and this program

  http://www.Piriform.com/Recuva