Dell laptop not start

Similar Questions

• My very old DELL does not start all the time. And when that happens, it doesn't look very good.

  Original title: Please help

  I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

  I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

  It seems that two things must happen... Three if you don't have good backups (it would be the first thing * if * you have not any outside of the machine.)

  (1) the material must be tested.  By restarting and pressing the combination of keys at the right time could test the hard/readers/speed control (CTRL + ALT + D, on a dell computer before starting at startup of Windows.)  For other tests - Dell probably put on a partition or sent a CD with the machine that allows you to perform a battery of tests on the... video, audio equipment, etc.

  (2) a restoration clean install a factory should probably be made * if * hardware testing are in agreement.  You could probably clean the machine by following the steps I'll give you - but knowing no more about the problem that we are so far... If that does not better... it's perception, or something so serious, that a clean install is probably the only real 'next step '.

  (And if the new facility does not solve it and analysis of material found nothing - that's the perception, or something (material) defective which is not be picked up).

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Dell does not start

  My Dell Studio One does not start, it only happens to a screen that says that a disk read error occurred press Ctrl + Alt + Delete to restart, when I press on which it restarts, but goes back to the same screen, sometimes it comes up with a screen indicating the failure of the AHCI Port device 0

  Hello

  I suggest you to contact Dell support for the diagnostic equipment. Click on the link below

  http://support.Dell.com/

• My 6 month old dell does not start, application disc... do start that I reinstall Windows Vista?

  My relatively new computer that didn't gave me no problems at all recently frozen. I restarded and it could not start. He asked for a boot drive - I put the disc of the operating system (windows Vista) and clicked on repair computer. He was asked to choose a listed operating system and there was no operating system listed. Then, he said "if any operating system in the list, select system drivers" (something like that). Then it brings up a bunch of files. I click on them and they can not be opened. Reinstallation of windows seems complicated... I'm afraid that I have will mess things up. and I want to be absolutely sure that the problem cannot be repaired first. Help!

  Obviously, somethng has hurt terminally with your operating system.

  Your computer is relatively new.

  It is under warranty Dell for all hardware and software problems.

  http://support.Dell.com/

  Why don't contact you their 1-the above link to get advice on what to do.

  Follow the instructions in Dell to reinstall Vista.

  Below the link of Dell for the info on how-to-reinstal Vista using the two methods.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  It's way to Dell to reinstall from the DVD on your computer.

  Answer the questions in blue; It is in a sequence.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Computer laptop not start, receive the error message "this application has requested the execution to terminate in an unusual way. "IE on microsoft visual c ++ runtime library.

  According to the positions.

  * original title - my laptop does not start, i, m doing a pop up window that says this application has requested the execution to terminate in an unusual way. IE on microsoft visual c ++ runtime library *.

  Hi ElaineMckee,

  Follow the steps below:

  Step 1:

  Start in safe mode and perform the System Restore to a restore point before the show.

  See also: System Restore: frequently asked questions

  
  What to do if Windows does not start correctly

  
  Step 2:

  What is a runtime error?

  What should you do about Internet Explorer script errors?

  Correct errors in Internet Explorer

  Step 3:

  Start your computer in a clean boot state and see if you continue to receive the error.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Laptop not start after upgrading the BIOS crash

  Hi all

  I just want to ask if there a chance to reactivate my Satellite A300 after crash BISO update without it sends to the service of Toshiba.

  I downloaded the new BISO and he started in the Windows menu. After a few seconds my PC crashed and everything was frozen.
  I turned off the PC.
  Now, when I press the power button to boot up the laptop, the screen is black and I can a sound BRR, BRR, BRR of the CD-Rom drive.

  Don't you think that it is possible to boot from a CD or something like that. Is it possible to reactivate my phone?

  Your help would be really appreciated!

  Thank you very much

  Best regards

  Chotte

  Sorry but if the BIOS chip is damaged there is not a lot, you can do about it. You must contact the Toshiba authorized service provider.

• 8 place of Dell does not start after the update failed

  I had started my new Dell place 8 (with Android 4.2) for the first time, and it works pretty well. I was about to install some applications when I noticed "System update," tap to install. I did and it downloaded, rebooted and started to install with nothing do not appear to be wrong. I waited patiently to settle, and all at the end of the installation, he stopped and displays an error message - which amounted to a bot Android in a pose 'broke, closed, stwaming' and the message 'error '.

  And it has been frozen.

  I held down the power button to turn off and then repressed it see the logo of dell for a fraction of a second, and then a USB symbol for a fraction of a second, then it stops. This happens whenever I start.

  I tried to use Droidboot to reset the installation. I can get this to work, but after that I selected recovery it restarts and after the Dell logo gives me the error message 'pic of the Android dead' with the message "No command." This is an another freeze screen, I can't go further without having to reboot.

  What I want is this thing start, I don't like what version of Android, it runs at that time. Assistance to get the thing to start would be greatly appreciated. I won told the thing in a contest, I don't want to be the proud recipient of a brick.

  In this regard, it turns out that you don't have any loose! I discovered this by risking that it and it worked! I didn't not lose something unique on my tablet.

  Step 1 power off.

  Step 2: Press and hold the Power + flight to access Droidboot.

  Step 3: Choose Reboot or recovery (I chose the recovery! "I would say that recovery is the best option!)

  Step 4: When greeted by Dead Android, room hold press flight - up twice and a mini menu appears.

  Step 5: Select Restart now. In a few minutes, your device needs to be restored and booted up ready to go! Enjoy your Tablet without worry!

• Laptop not start after I have updated BIOS

  Toshiba Satellite A215-S5849
  Initially I had problems with the left speaker making a horrible ringing. Seeking advice forums & help & the fact that I'm pretty computer I came to the conclusion to reinstall an operating system was called for.
  Since I use that this laptop for DJing theres only a few programs on it there wasn't much hassle.

  Operating system reinstalled Windows 7 update it & all drivers & the Buzz was still there.
  That's when I read a couple of users of Toshiba laptops said helped a BIOS upgrade.

  So I went to the official page of support Toshiba & my phone flashed using the following BIOS upgrade

  ACPI BIOS Flash version 2.00 for Satellite A215 (PSAFGU/PSAFHU) 32/64-bit

  Towards the end of the flash my pc screen went black power lights are on, power cord light turned on, seeing the battery on just not OS

  What I tried.
  Disconnected from the power supply.
  Battery removed
  Leave for 20 mins & then tried to restart.

  Same thing happens every time
  LEDs power lights HD towers for a minute, but nothing happens after that.

  Any ideas why update official software would cause my computer to not work & how to back up or clear my bios to the default specifications.

  It seems that the Bios Update gone bad and you need to reflash it. you need to contact the asp (SAV):

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  Read this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395&TSTART=0

  Sorry, I put a wrong link before, it is edited above

  Post edited by: Jeka -?

  Post edited by: Jeka -?

• Problem loading the Dell laptop to start scanning HP Deskjet 3070 B611

  I used to be able to open the program Deskjet devices and printers, and then select an option to start scanning of a document. I could add multiple pages of the same document, and then save as jpeg or PDF. However, some time before, this option just disappeared and I must now press scan of the Deskjet printer and it will not save pages, one at a time to the jpeg format. So if I have 20 pages to scan and send an email, I have now to 20 jpeg different attachments, which is unbearable.

  I hope someone can point me in the right direction to solve this problem - maybe that's something really simple?

  I have not changed my cell phone or operating system... He has simply disappeared.

  Thanks in advance

  Hi @28BLS

  You can the statement of the software to record all your scans into one file, if you save as PDF, but I didn't hear of this option if JPEG recording.

  If you open the Printer Wizard, then click on scan a Document or Photo, the Hp Scan opens. In the analysis of HP, you can go to advanced settings, and then click the tab file and there is a check mark in front of "create a separate file for each scanned page.

  If you are not using HP Scan, please try as it may solve the problem, but as I understand it, this option is only available when saving in PDF, not JPEG.

• Computer laptop not start after the opening of G6-1118tx with screwdriver

  Today my brother locked my laptop from BIOS, so I've heard of a forum to solve this problem by removing the cmos battery jumper, so I removed all the screws and tried to open it but it was difficult so I put all the screws in and tried to start the laptop
  but the laptop isn't turnin (or the button light work / stop) but when I plugged it into the charger it was charging
  Please help me, I'm unable to maintain my blog, channel and all the I hope you help me!

  I suggest that you have someone who knows what they're really trying to open it upwards and it give an inspection. A more expensive option would be to go into a cell phone store and explain the problem.

  Take a look at the instructions on insidemylaptop.com to disassemble your laptop.

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer Dell laptop, OS preinstalled Windows 7 does not start. Error: PXE - E61

  Original title: Failure to Boot to

  Computer laptop Dell, OS of Windows 7 pre-installed. No disc restoration/reformat/install for 7. (This is bullcrap if you ask me). Does not start. Error: PXE - E61: Media test failure, check cable PXE - M0F: out Broadcom PXE - ROM

  What should I do here?

  See if there is a solution here: http://hubpages.com/hub/How-to-Solve-PXE-E61-Media-test-failure-Check-cable-Error

  J W Stuart: http://www.pagestart.com

• Computer Dell laptop does not start with error: 0xc000021a in windows 8 pro with media center...

  I have dell laptop computer (windows 8 pro with little Media Center x 64) ##genune, not cracked or pirated... #.

  It worked fine until the evening yesteday and I was playing Holy 4th place after closing, I noticed that the battery is about to happen at 10% so I did it just to sleep for awhile cauz I haven't had none running around the House... shortly after came current I just picked up my cell phone, but suddenly I saw an error message indicating that "your laptop computer encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100 % Complete) If you want to know more, you can search online for this error: 0xc000021a "and there is no changing the screen as I waited for 3 hours now... I never had an error like this... pls hlp me...

  Hello

  Are which country you located?

  Dell has wide global support. I suggest you to select the country where you are and check if you can get the recovery DVDs.
  http://www.Dell.com/support/contents/us/en/19/category/contact-information

• My Dell laptop does not start

  I have my older Dell laptop which stop the other day and I thought that the battery had just missed completely, plugged in left to load and when I got home it turns any. New laptop for my son has had this problem and tech support had me press and repeatly F key and I think that either press and hold the power button or press the key and let go? I wanted to try this with my laptop but can not remember what F key or the thing with the power button. Help please, hoping that he disappeared were ongoing work and family top photos.

  Thank you

  Hi Appieloosa,

  I suggest you follow the steps below, first to release any static power in the laptop which may cause this problem:

  1. remove the battery and the laptop AC adapter.
  2. press and hold the Power button for 20 seconds and release.
  3 reconnect the battery, AC adapter, and then press the power button.
  4. the laptop must turn if static is the cause.

  You can press the "Fn" key and the "Power" button to run the hardware diagnostics if the laptop does not power on after following the steps above.

  Please let me know your results.