Office jet Pro 6230: duplex on mac

Similar Questions

• Office jet pro 6230: office jet pro 6230

  I have a new officejet pro 6230 and the lights indicate a print head problem.  I changed the cartridges, powered it on and off and still get the flashing lights.  I looked up the authorized service centers and there is not less than 1000 miles of Cleveland OH. (go figure).  I bought the printer at Amazon and hoping not to have to return it.  Does anyone have suggestions as to where to fix as it is under warranty or how to solve the problems of flashing light?  Thank you.

  I had a similar problem with a HP 8500 - and I followed the suggestion to replace the print (for a cost of US $130) TWO heads!  Unsurprisingly, after that the HP ALWAYS had the same problem.  I did some research on the problems of print head on this site and found out that in all cases (that I found) was the ONLY way that the problem has been resolved by completely replacing the printer.  Unfortunately, mine was out of warranty.

  But, since yours is still under warranty, my suggestion is to contact HP customer support - they will be able to tell you what they can do for you in respect of the guarantee: Contact HP customer care. HP® customer support

  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.
  
  I'm a volunteer and I do not work for, or represent, HP.

• How to install HP Office Jet Pro 8500 wireless on Mac with os x worm 10.9.1

  Just bought an Apple MacBook with OSX worm 10.9.1 and trying to figure out how to install the printer of the object to work with her.  I am totally new to Apple products.  The website of HP showed install info for lower OSX 10.9.1 versions so I wonder if this printer is usable even on my new MacBookPro.

  Any help would be appreciated.

  -John

  Hi John,.

  You can find the steps to install and use the software on Mac OS X 10.9 in the following document:

  http://support.HP.com/us-en/document/c03967522

  For any question, you can also install the following package before, adding the printer:

  http://support.Apple.com/kb/dl907

  Kind regards

  Shlomi

• Mac for printer Office Jet Pro 8600

  I have an IMAC desk top connected to an Office Jet Pro 8600, running MAC OS 10.6.8.  I can't scanner to scan photos to a specific size.   I use the HP utility but no matter what I try to do the witnesses only scanned image angle front right of the scanner glass.  How can I change the size of the JPEG scanner and how to scan some picture of the size that I place on the glass?

  Hi paul8588,

  Thank you for your answer!

  Here is a video, Scanning HP 8600 Series to Mac OS. This will show you what you see for your scanning options.

  I hope this clears up things and have a good day!

• Office Jet Pro 8610: El Capitan problem - error =-19 unsupported color space

  Q: problem for you to connect to HP Office Jet Pro 8610

  Apple - iMac 21.5 "®-Intel Core i5 (1.6 GHz) - memory of 8 GB - 1 TB hard"

  El Capitan
  
  Printer: HP OfficeJet Pro 8610
  
  Help my printer set-up of mother-in-law to his new iMac. Wi - Fi connection; It will display the page of 'test' for the HP Mac utility. Printing from an application (Mail, etc.) results in "unsupported Colorspace = - 19" error.
  
  I uninstalled and ran disk first aid and re-connected. I deleted Printers/Scanners and added in. Various combinations of the above steps with re - starts between the two. Am already balding, can't afford to get out more. Any advice greatly appreciated.

  Well, to refine the question, you have a blue flashing or a solid blue light on the printer?

• Office Jet Pro 6830: disappointed customer!

  I just bought the Office Jet Pro 6830 to replace an old one that died. I find now that I can't install it on my Mac Pro Lapbook! The CD that came with the new printer had no program installation. He wants only to go online to install the printer.
  I only use my printer to print files from my laptop as I HAVE NO INTERNET CONNECTION IN MY HOME! I tried to go to a WiFi with my laptop to download the installation, but get a 503? Tell an error message that I am not allowed to use the page.
  I am 66 years old and disabled in order to take the printer elsewhere to install is out of the question. Furthermore, I live in the Bush with the city the more close 16 miles away!
  Now, I'm sorry, I bought what I thought, it was a great replacement for my old Office Jet Pro. I will seek for a company that provides the installation CD WITH the printer!

  Hi @Madoldlady,

  You must update the 10.6 to 10.7 to use this printer.

  The printer works on the MacBook Pro 10.7. The CD should install the drivers on the Mac 10.7.

  If not, then I suggest you get the drivers of someone else who is on the internet and save it on a drive flash and then you can install the drivers on your computer from the flash drive.

  I hope this helps. Thank you.

• HP Office Jet Pro 251 DW: placement of envelope

  Hello

  HP Office Jet Pro 251DW
  Microsoft Word 2007
  The model of envelope in the status bar displays the envelope centered, face down with the flap to the left.
  Is the default value of the envelope word 2007 - envelope tab > Options > print options are face down with flap on the right in the status bar.
  That worked fine until recently. I can only put an envelope in the tray this printer-centric.
  If I choose face up or face down in the print options, printing is always on the side of Rabat. The envelope always passes through the duplex unit.
  With the face down it shouldn't go through the duplexer. The only way I can print properly on the face is charged to the surface of the envelope with the flap to the right.
  I would like to come back as it was of the operation - face down from Rabat to the left as shown on the template. Any ideas?
  Frank C

  Hello

  I worked with HP Support for the Office Jet Pro 251DW. (1 800 334 5144)
  We walked in a shared session and after many expeiments, we concluded that there
  to disable the duplex in word before printing the envelope. Then the envelope could be loaded as
  prescribed by the model of Lac to paper. It is face down with the flap to the left.
  Missing this step the envelope goes through the filter of referral and prints on the side of Rabat.
  Word > Office button > print > properties > print on both sides > no > OK > close printing diagloge
  Don't say OK to print because it will print until the envelope is ready.
  Now choose mailing and envelopes. Enter the address and print them. Do not forget to return the duplex setting before
  a normal print job.
  Either way, you can manage addresses envelope and letter with Grahm mayors insert address.
  http://www.gmayor.com/InsertAddress.htm

  Frank C

• Digital control on Office Jet Pro 8625 display has become dark

  Control on HP Office Jet Pro 8625 screen became dark after I lifted the cover plates to copy a piece of paper.  No amount after pressing the reset button on the front of the unit allows.  Am able to print from the laptop connected fine.  How can I get the screen to control the light again to the top?

  Hi @our-HPand welcome to the Forums of HP!

  I understand that your display screen went dark.  I'd like to help!

  It may be a problem with the firmware, in which case we will need to be updated.  To make sure that we use the appropriate firmware update, I must first of all a little information. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend performing a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer. Thanks for posting on the HP Forums!

• Office jet Pro Premium 8600: print 2 sides

  I use a Macbook Pro OS X 10,11.3.  I also have on my computer Microsoft Office for Mac.  My printer (Office jet Pro Premium 8600) allows a 2 sided printing except if I try to print something from Microsoft Word.  When I try to print with Word, for 2-sided printing option does not appear.

  How can I make 2 sides print with Word?

  Hi @John52387,

  Thank you for your participation in the Forums of HP Support! I'd be happy to help you print 2 sides of the word. I suspect that you may need to select printing 2 sides in another program, and then save these settings as a preset impression. Once you have created this new preset, you can select the preset when you print from Word.

  Although the following Apple article says OS X Yosemite in the title, the instructions also apply to El Capitan: Save your settings to print to use later.

  Thank you. If you need more assistance let me know and I will gladly do whatever I can to help.

  If this resolves the issue, please click Accept as Solution button below to help others find what worked for you.

• Office jet pro 8500 software for os 10.8

  I have a week I have Mac OS X 10.8 running.

  My not so new Office jet Pro 8500 910 a has a disk for OS 10.6.

  When you try to install the printer an error message is displayed.

  The help of HP suggests using the Mac update, but I guess as have not yet had time to do an update to the 8500.

  It doesn't seem to be a download again on the HP site.

  Any ideas on what I can do, and before anyone suggests, I don't want to buy a new printer!

  Well Yes, I recommend a few levels:

  1. the base drivers from Apple (at HP, in fact): http://support.apple.com/kb/DL907

  2. restart your Mac.

  3. download and install the full setting: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108394-1&cc=us&dlc=en&lc=en&os=219&product=4083969&sw_lang=

• Office Jet Pro 8620: No Assistant HP printer or Application icon

  I'm under 10 64-bit Windows and the Office Jet Pro 8620.  I can't configure my scan-to-email of the printer (continues to request a code).  My printer is connected via Wi - Fi, and otherwise works fine.   Following the instructions of support, I tried the Printer Wizard, but there is no such program listed in my HP folder and no printer the Office Assistant icon (although there used).

  I downloaded all the updates current and running Scan Doctor several times.  No luck.

  Any help is appreciated.  Thank youl.

  Hello, GreenTurtle,

  Thanks for the quick response.  I followed your instructions.  After disconnection of the wireless connection and then the wizard of wireless, all re-installed configuration correctly.  The appropriate icon appeared on the desktop and I was able to put everything in place.

  I am very grateful for the help and quick response!

• Office Jet Pro 8600: office jet pro 8600 clear the display

  I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

  In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

  Kind regards

  Meredith

  Hey @mere4340,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Pavilion Intel Core i3 8 GB of RAM: How can I get my HP Office Jet Pro 8600 printer to work using Windows 10?

  With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?

  Hello

  Please download the software package and the following driver and install on your computer (s) 10 of Windows:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• How to scan using your HP Office Jet Pro 8600

  Well, I got my answer because I could not find a topic 'resolved' in this regard. So I decided to post my findings to help the next interrogator (is that a word = the one interviewing). FYI - I am not a "geek", and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if it makes a difference.

  1. go to control panel and choose:

  2. material and audio, then

  3 devices and printers, then

  4 fax - HP Office Jet Pro 8600 (network) or whatever printer choice applies to your situation, then

  5 HP Printer Wizard, then

  6 scanner activities, then

  7. analyze a document or a picture, then

  8. Save as PDF

  9 scan

  10. save in a folder you choose

  I know this may seem simplistic to most of you, but maybe someone like me is out there, trying to find this out and this could help.

  Roxi

  Hello Acupuncture,

  Thank you for posting your solution you found yourself, on the use of the scanning function on your HP OfficeJet Pro 8600. I apologize as we were not fast enough to answer one of your questions on the Forums of HP Support. I've been able to check your user page but could not find your original post on us asking how Scan, did you remove the question? Anyway I'm glad you are now to the top and scanning of your JO 8600.

  For later use, I would like to you to take a look here: how Scan: Windows 7, here we will give all the options and shortcuts on scanning with or without the HP software as well as a few cool features, like the scan from the front panel of your 8600 and adding several pages in a single file.

  Yet once I thank you for taking the time to help other members of the community, so thank you once again!

• Office jet pro 8500

  My iPad is no longer connect to print from my hp office jet pro 8500 a printer

  Thanks for your replies; Since I was so impatient, I decided to reinstall the drive in my laptop again. I had a virus at some point and maybe uninstalled something. Whether, after reinstalling the hp disk I not had a problem. Thanks again for responding. I don't know that I'll need your help again.
  Sara099