Dell Optiplex 7040 with ImageAssist of imaging

Hello

We recently opted for the Optiplex 7040 here to my financial institution. I'm putting our picture Windows 7 on it using Dell Image help. I downloaded the new driver CAB file and place it in the folder "Dell_Driver_CABS_Local". Image recovering very well and I see that it installs the drivers without error. When I restart the system however I can't load windows. It freezes and just a loop. I did some research on the Internet and I think it is related to the hard drive that I use. My Optiplex 7040 uses the 256 GB Samsung SSD NVMe and I read that there are some compatibility issues with Windows 7 with regard to the pilots. What I'm confused about is if I have downloaded the latest driver CAB from Dell, which escapes me.

In the BIOS, I have the following enabled:

BIOS Version 1.2.8
Secure Boot OFF
Legacy Boot
Activate the Option Legacy ROMA ON

Help, please!

When the Windows 7 image to readers of type NVMe, bios must be on to UEFI to generate the image.  Once this done, then it will start correctly after the image is planned.

Tags: Dell Tech

Similar Questions

  • Can I place a Dell OptiPlex 755 with Intel Core 2 Duo in Windows 8 Pro to Windows Pro 8.1?

    Can I place a Dell OptiPlex 755 with Intel Core 2 Duo in Windows 8 Pro to Windows Pro 8.1? I tried several times. I wonder if my computer does not meet the requirements for upgrade. How can I?

    Hello Andrew,.

    Thanks for posting your query on the Microsoft community Forums.

    According to the description, you want to upgrade to windows 8 for windows 8.1 on your system.

    As you already use windows 8 on your system, you can try to upgrade to windows 8.1. However, there are some system requirements that are needed to run windows 8.1 correctly on your system. Please see the link below for the topic of system requirements.

    Reference:

    The system configuration required

    Outside the system requirements, you will also need the windows 8.1-compatible drivers. There is a possibility that some devices may not work if the compatible drivers for windows 8.1 are not installed on your system. Driver are manufactured by the manufacturer of the system. It seems that Dell has not made drivers for windows 8.1.

    Refer to the link checking the available drivers for your system.

    Reference:

    http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-755/drivers

    Hope this information is useful. Please let us know if you need help with Windows.

    Thank you

  • Request for block of power SUPPLY Dell optiplex 7040 Mini-Tower

    I intend to buy optiplex 7040 MT at end of game. So I would like to know:

    1. the motherboard has the processor power connectors and standard motherboard or owners?

    2. is it possible to replace the stock power supply with a cooler master extreme power 600W more? If not, what more than size of power supply fits there?

    3. is it possible to mount a gtx 1080 in there?

    Hi iamprateekprakash,

    We do not recommend that it works because it has not been tested but according to your discretion, you can try, but as you rightly noted that it might void the warranty with Dell.

  • Dell Optiplex 745 with Broadcom NetXtreme 57xx Gigabit Controller with Windows 7 x 64 host cannot fill network

    All, I am new to the forum but have been reading up on top of a problem that had led me into a wall.

    I'm trying to create a development environment that uses VMWare Workstation 7.0.1 (and I tried with 7.0.0 before, leading me to)

    update in the hope of a quick solution) as a development of imaging and the test bench.  The system is a Dell Optiplex 745, upgraded to 8 GB of

    RAM.  Unfortunately, it seems that the biggest problem is the network card.

    I tried several different operating systems, and all DHCP requests are found in the AUTOMATIC private IP addressing.  This is even after I implemented a custom adapter (VMNet2) that fills explicitly to this network card problem.  I disabled VMNet0 and all because this dish was not working.  I have read some relevant

    messages, but nothing seems to help.  This included the http://communities.vmware.com/message/675649 and more

    positions listed on the registry settings.  I don't know what to do at this point.

    So, for those who do not know the Broadcom driver issues, they are apparently many.  It is important to disable the unloading, but

    I'm not able to find the settings in the post linked above.  It's quite similar to the OP for this thread.  I'm not

    know if it's a difference of conductor between the 32-bit and 64-bit implementations.  So, I updated from the version of the driver

    12.2.2.1 (b57nd60a.sys) of 10.100.0.0 (I think, can not driver rollback now to check because I need to work on VMS for urgent

    projects as soon as POSSIBLE).  So, as I said, I was unable to find the parameters of this post

    ()http://communities.vmware.com/thread/191085) mentioned below:

    • Large Send Offload (IPv4)

    • Large Send Offload v2 (IPv4)

    • Large Send Offload v2 (IPv6)

    What I found were these parameters:

    • Flow control (Auto, I tried to disable)

    • Priority and VLAN (priority & VLAN enabled; I tried priority and VLAN disabled)

    • Speed and Duplex (Knew better than to mess around here, has made the problems in the past, retired to Auto)

    • VLAN ID (always 0)

    • Wake Up Capabilities (Magic Packey; no one tried)

    • Unloading ARP (Enable; I tried to disable)

    • NS unloading (Enable; I tried to disable)

    I tried enabling / disabling all, specially those mentioning the unloading, all day without success.  This did not help.

    Later, I tried to add DontAddDefaultGateway, EnabledRSS and DisableTaskOffload keys to my CurrentControlSet on the

    host.  For some reason any DisableTaskOffload shows in the regedit, GUI, not the export of text.  Don't know what this means, and I'm too

    tired of care at this point.

    Host registry settings:

    Windows Registry Editor Version 5.00

    "ICSDomain"="mshome.net."

    "SyncDomainWithMembership" = DWORD: 00000001

    "NV Hostname"="HOME".

    "DataBasePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,

    00,74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.

    64,00,72,00,69,00,76,00,65,00,72,00,73,00 5 C 00, 65, 00, 74, 00, 63, 00, 00, 00

    "NameServer"=""

    "ForwardBroadcasts" = DWORD: 00000000

    "Domain"="domain.mei.contoso.com."

    'Hostname '=' HOME '.

    "SearchList"=""

    "UseDomainNameDevolution" = DWORD: 00000001

    "DeadGWDetectDefault" = DWORD: 00000001

    "DontAddDefaultGatewayDefault" = DWORD: 00000000

    "EnableWsd" = DWORD: 00000001

    "QualifyingDestinationThreshold" = dword:00000003

    "NV Domain"="domain.mei.contoso.com"

    "EnableRSS" = DWORD: 00000000

    "DhcpNameServer"="141.161.200.201 141.161.100.201".

    "DhcpDomain"="contoso.com".

    So, I'm not where that leaves me.  I am attaching a file vmx for a Windows XP (currently only started in WinPE) invited configured with bridged and IP information for the host and the guest.  If anyone can help me, I would be incredibly grateful.

    Guest VMX file:

    . Encoding = "windows-1252".

    config.version = '8 '.

    virtualHW.version = "7".

    maxvcpus = "4".

    scsi0. Present = 'TRUE '.

    memsize = '512 '.

    ide0:0. Present = 'TRUE '.

    ide0:0. FileName = 'Pharos PS.vmdk Test '.

    IDE1:0. Present = 'TRUE '.

    IDE1:0. FileName = "C:\Users\%username%\Documents\ISOs\peboot.iso".

    IDE1:0. DeviceType = "cdrom-image".

    floppy0.filetype = 'file '.

    floppy0. FileName = "autoinst.flp".

    floppy0.clientDevice = "FALSE".

    ethernet0. Present = 'TRUE '.

    ethernet0.wakeOnPcktRcv = "FALSE".

    ethernet0. AddressType = 'generated '.

    USB. Present = 'TRUE '.

    EHCI. Present = 'TRUE '.

    Sound.Present = 'TRUE '.

    sound.startConnected = "FALSE".

    sound.fileName = "-1".

    Sound.AutoDetect = "TRUE".

    MKS. Enable3D = 'TRUE '.

    pciBridge0.present = 'TRUE '.

    pciBridge4.present = 'TRUE '.

    pciBridge4.virtualDev = "pcieRootPort"

    pciBridge4.functions = '8 '.

    pciBridge5.present = 'TRUE '.

    pciBridge5.virtualDev = "pcieRootPort"

    pciBridge5.functions = '8 '.

    pciBridge6.present = 'TRUE '.

    pciBridge6.virtualDev = "pcieRootPort"

    pciBridge6.functions = '8 '.

    pciBridge7.present = 'TRUE '.

    pciBridge7.virtualDev = "pcieRootPort"

    pciBridge7.functions = '8 '.

    vmci0. Present = 'TRUE '.

    roamingVM.exitBehavior = 'go '.

    displayName = "Test Pharos PS"

    guestOS = "winxppro.

    NVRAM = "Test Pharos PS.nvram."

    virtualHW.productCompatibility = "hosted".

    easyInstall.keepFloppy = 'TRUE '.

    extendedConfigFile = 'Test Pharos PS.vmxf'

    ethernet0.generatedAddress = "00: 0C: 29:64:09:63.

    tools.syncTime = "FALSE".

    UUID. Location = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

    UUID. BIOS = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

    cleanShutdown = 'TRUE '.

    Replay.Supported = 'TRUE '.

    Replay.FileName = «»

    ide0:0. Redo = «»

    pciBridge0.pciSlotNumber = "17".

    pciBridge4.pciSlotNumber = "21".

    pciBridge5.pciSlotNumber = "22".

    pciBridge6.pciSlotNumber = "23".

    pciBridge7.pciSlotNumber = "24".

    scsi0.pciSlotNumber = "16".

    usb.pciSlotNumber = "32".

    ethernet0.pciSlotNumber = "33".

    sound.pciSlotNumber = "34".

    ehci.pciSlotNumber = "35".

    vmci0.pciSlotNumber = '36 '.

    vmotion.checkpointFBSize = "134217728.

    USB:0. Present = 'TRUE '.

    USB:1.present = 'TRUE '.

    ethernet0.generatedAddressOffset = '0 '.

    vmci0.ID = "1701054819".

    tools.remindInstall = 'TRUE '.

    USB:1.DeviceType = "hub".

    USB:0. DeviceType = "mouse".

    ethernet0.VNET = "VMnet2.

    ethernet0. ConnectionType = "custom".

    debugStub.winOffsets.version = "7".

    debugStub.winOffsets.value = "0 x 0, 88 x 84, 0 18 0 x 190 x, 0 x 174, 16, 416, 0x22c, 0 x 228, 0x1f0, 0 x 224, 0x20, 0x18, 0x18, 0x20, 0 x 24, 0x11c, 0 x 8, 0 0, 0, 4 x 0, 14 x 100000, 0xc, 0xc, 0x1b0, 0x18, 0x13c, 0x1f4.

    Host adapters:

    Windows IP configuration

    Name of the host...: TOWMI

    Suffix main Dns...: domain.mei.contoso.com

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    ... DNS suffix search list: domain.mei.contoso.com

    Contoso.com

    Mei.contoso.com

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : contoso.com

    ... Description: Broadcom NetXtreme 57xx Gigabit Controller

    Physical address.... : 00-19-B9-38-5A-03

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::25cc:6bfc:91 has 9: d64d % 11 (Preferred)

    IPv4 address...: 10.205.3.136 (Preferred)

    ... Subnet mask: 255.255.254.0.

    Lease obtained...: Monday, 1 March 2010 16:00:06

    End of the lease...: Tuesday, March 2, 2010 16:00:05

    ... Default gateway. : 10.205.2.1.

    DHCP server...: 141.161.200.213

    DHCPv6 IOOKING...: 234887609

    DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

    DNS servers...: 141.161.200.201

    141.161.100.201

    NetBIOS over TCP/IP...: enabled

    Ethernet VMware Network adapter adapt VMnet1:

    The connection-specific DNS suffix. :

    ... Description: VMware Virtual Ethernet adapt for VMnet1

    Physical address.... : 00-50-56-C0-00-01

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::ace9:b312:d32d:fb39% 16 (Preferred)

    IPv4 address...: 192.168.58.1 (Preferred)

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 352342102

    DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet VMware Network adapter adapt VMnet8:

    The connection-specific DNS suffix. :

    ... Description: VMware Virtual Ethernet adapt for VMnet8

    Physical address.... : 00-50-56-C0-00-08

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::1c44:4e88:3178:4ccf % 17 (Preferred)

    IPv4 address: 192.168.168.1 (Preferred)

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 369119318

    DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {4EF89CD9-7A7D-4B80-83C5-A56D5FA6D748}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {E03C7ECA-35DF-43C6-BCC8-08D2BB8E4233}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #2

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter ISATAP.contoso.com:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. : contoso.com

    ... Description: Adapter Microsoft ISATAP #3

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Adapters of comments:

    Windows IP configuration

    The host... name: minint-et0ko7r

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :

    ... Description: VMware accelerated AMD PCNet Adapter

    Physical address.... : 00-0C-29-64-09-63

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::8842:488e:b75:ec51 %2 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.236.81 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 33557545

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    See also my VNE screen capture and sample log file attached.  Thank you very much in advance for any help.

    Sorry, had to rub a small part of the newspaper for my own protection.

    Post edited by: alharaka

    I'm sorry, I completely forgot to reply to this topic yesterday (get distracted by a matter of work).    I'll be back today and noticed that you have marked this as answer.  The root cause of the problem was therefore one MAC address per port restriction put in place by your network management team?

  • No sound on Dell Optiplex gx270s with Windows Vista

    Computer: Dell Optiplex gx270s

    operating system: Windows Vista

    I have no sound on my computer. In the taskbar next to the clock, I have a small red dot with a white cross, which tells me that she is mute.  Tried a list of solutions, but so far, nothing seems to help.

    I tried many things like

    Discover http://windows.microsoft.com/en-us/windows-vista/Tips-for-fixing-common-sound-problems

    did not work

    I tried searching audio drivers in dell.com and could not find the necessary driver because he was not the choice of the operator system of Windows Vista for drivers it were not compatible.

    Well, if anyone can help me I would really appreciate it.

    Thank you!

    http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&ServiceTag=&SystemID=PLX_PNT_CEL_GX270&OS=WW1&OSL=en&CATID=&impid

    Above is the link to Dell for your computer model.

    As you can see that Dell does not have Vista drivers for, according to their Web site.

    You will need to contact Dell about this issue because they provide drivers for your computer:

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

    See you soon.

    Mick Murphy - Microsoft partner

  • Dell optiplex 745 with Windows 7 Pro

    I just bought a Dell Optiplex 745 refurbished with Windows 7 Pro.  It came with a HP Windows 7 Pro re install the disc and when I'm asked them thereon, they stated that a re HP install disk is identical to a Dell disk.  Is this true and if not what problems it will create if I have to re install Windows 7.

    They are the two Windows 7, one that said you is accurate, but there are also significant differences.  Dell Media is intended to be installed on a Dell computer and activate automatically, without the need for manual entry of the product key.  HP is designed to do the same... on a HP machine.  There is a good chance that he would not accept the Dell product key either... even if she have installed successfully.  In addition, most of the OEM media even install on other than a machine correspondent (HP discs usually install on Dell, not vice versa).

  • Instructions for the installation of Windows 10 on Dell Optiplex 755 with running Windows 7

    I need instructions on how to install Windows 7 to 10 Windows on a Dell Optiplex 755.

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Dell Optiplex 9020 with horrible sound

    I installed Windows 8.1 (clean install of Microsoft ISO) on this new 9020 Optiplex and installed all updates from microsoft and then installed all Dell updates (using the web page support and my dell). Part of that is to install the audio driver Realtek Dell HD package.

    After installation, the headphone/speaker output before jack product really terrible audio or no audio when connecting headphones (which worked beautifully with my previous Vostro 200 machine). The Dell software opens a popup to ask really strange questions about what I plugged (skullcandy headphones, earphones, speakers dell or right speakers). No matter what I choose the audio is either distorted and often missing voices or other sounds important or it is completely absent. Windows sound system is very good. So I know that the plug and the headset works very well, it's something to do with the dell software that causes the output this horribly distorted or filtered audio.

    I don't want any "enhanced" or some audio special software tries to do, no movie mode, music mode or whatever it is. Just the normal sound as it is recorded.

    It's so bad, that I'll have to consider buying a sound card, or dig my old USB audio device to have a decent audio output.

    Rear audio output also has software problems unless I have install audio drivers from Dell. The rear output is failing to be a kind of treble only filtered out (no bass or midrange sounds) if I do not use the Dell software.

    This really should not be difficult. A simple output DAC audio as it was recorded. That's all.

    OK... after the call of support and to have a run around for more than 2 hours on the listed company as the owner of the computer, I diverted without help.

    I spent another 3 hours fiddling with everything I could think of until I went back to the basics and did what I should have done from the beginning: tried different headphone directly connected to the machine before taking.

    I actually tried 2 different pairs of headphones right when I first found the problem. Both have the same problem so I assumed that it had to be the machine because it is what has changed. And as the behavior seemed different in different applications, I thought it must be a software problem.

    The fix was actually related to the material. I use an extension the monster headphone cable (yes I know, it's really cheap on Amazon) so that I can wear my helmet while I move my office and job fair in my office. Unfortunately, it seems that the male connector at one end of the cable is a bit small compared to most of the catch of helmet.

    And they say that the size is not serious...

    In any case, I use a combination of 2 extensions (a monster and one that came with my headphones), so I just swapped their so one that came with my headset is connected to the computer and everything works fine. I think that the short connector must have been filled should not have things or something like that.

  • SCCM 2007, WinPE30x86 - Optiplex 7040 - No. USB mouse keyboard in WinPE

    Hello!
    Im getting OSD works on Dell Optiplex 7040 with SCCM 2007 (Winpe30) of evil. No response from the mouse or keyboard in PE. I created a bootimage with the latest Dell WinPE drivers (tried A18 and A19). Driverpack WinPE from Dell contains 30 USB and 3.1 drivers but no luck-USB. Looks like the Optiplex 7040 have only ports of USB30.
    This isn't a problem in our environment SCCM 2012 (WinPE10).

    Solved... BIOS has been the root cause. Fra 1.2.1 to 1.2.8 BIOS update fixed the issues.

  • Problem with the Dell Optiplex 755.

    Have a refurbished Dell Optiplex 755 with windows 7, only a few months ago.  Sometimes the screen rises all yellow and you can't get out.  Sometimes screen goes all black but if you click anywhere on the screen with the mouse will go up all that is behind the screen where you clicked, but you must do it all over the screen to see what is there.  Now the last week or so whenever you leave the computer and return windows has recovered from an unexpected shutdown down.  Can someone tell me what could happen?

    This behavior indicates a video problem.

    A cable loose or damaged video from your computer to the screen.

    A failed video monitor.

    This computer has a separate video card?  If the cable connected to the back of the PC is vertical, the answer is probably no.  If it's a separate video card, you need to open the PC and remove, then reinsert the video card - its called re-seats of the Board of Directors.

    How old is follow you and what type is - LED or CRT.  Is - this really really heavy?

    Remove and check the end of the thread and examine the tiny pins in the connector, none of them are bent?

    The judgment is not likely related to changing the color on your screen.  A number of things that cause, but you need to check your hard drive and check the temperature inside the box.

    Turn off the power.  Hold the button for 7 seconds.  Open the case and see if there is a lot of dust.  Have one of those cans of compressed air.  Blow off the dust from the case.  Pay special attention to the fan on the processor with the fins of the radiator aluminum under him.  Make sure that it is free as well as fans of dust.

    You should test the hard drive to ensure that it is not a failure.  If you tell us the manufacturer of the drive, we can tell you where to find the appropriate software.  In the text box above the globe on the left lower part of peripheral type.  Type of device.  Click on Device Manager.  In the window that appears, click the small arrow to the left of the disc.  Send us the model number, you can see it.

  • More big power supply for Dell Optiplex 7040MT - please help

    Hi all

    I recently bought a dell optiplex 7040 mini lathe and it came with a 240 watt power supply. I want to update and would like to know what my options are.

    Thank you

    The 7040 could use the same wacky scheme that uses precision T1700.  If this is the case MODDIY has an adapter to convert the 24pin connector 8 pin. Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700 so I think the 7040 is the same.

    http://www.moddiy.com/products/Dell-OptiPlex-T1700-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

  • Will Dell optiplex 620 clean install without disc

    I have a desktop Dell Optiplex 620 with Windows XP Professional installed.  Is it possible to

    clean and reinstall without disks?

    Hello

    I'm sorry, it is not possible to perform a clean installation of Windows XP without using the Windows installation disc.

    See the following article from Microsoft for assistance.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

    Please reply with the status of the issue, so that we can better help you.

  • OptiPlex 7040 MT: Caddy to drive 2.5 "(emplacement 2.5") "

    The Dell Optiplex 7040 has MT of 2 slots for adding new hard drives 2.5 ".

    However. instead of the standard width 2.75 "(pour un nouveau supplémentaires 2.5" disque SSD), housing seems to be approximately 3.25 "wide.

    Any suggestions as to what part number is required to mount the disk 2.5 "in the designated location 2.5" are appreciated. Thank you.

    Hi Currin,

    Please write to us.

    There are two brackets for size

    X9FV3: for 2.5 "caddy

    0CW33: for 3.5 "caddy

    We provide system tag #, e-mail address and your name via private message, by clicking on my name in blue and then select send a private message

    Concerning

  • Q: can you Optiplex 990 (with i7-2600 and 265W PSU) run a 750Ti?

    Dear people,

    Recently, I bought a refurbished DELL Optiplex 990 with 8 GB of RAM and i7-2600 and I am very satisfied with this system, but I would like to run some games on high (ish) definitions.

    That is why I want to upgrade the system with a GTX 750 Ti graphics card (for example: Asus NVIDIA GeForce GTX 750 Ti STRIX).

    My question is:
    can the original systems 265W PSUS provide enough power for the upgrade? Or should I upgrade the PSU as well to have a stable operation?

    These 750Ti are originally designed for low current systems (they won't be able to take the PCI-e slot - max 75W - and have NO auxiliary pins). The Optiplex s 990 can be delivered with an ATI graphics card (with a circulation of ~ 68W of PCI - e), moreover specifications document 990 States that the PCI-e slot on the motherboard is evaluated with standard 75W.

    On the other hand, I think that this upgrade can really stretch the limits of the system, add more hard drives / RAM and/or insert some USB devices and the power supply isn't able to take it.

    Model: Optiplex 990
    PSU: dell d3d1c
    Power supply: 230 VAC
    PC: i7-2600, 2 DIMM DDR3 RAM (8GB total), 1 HDD (500 GB)

    While slowed the machine display but play games the machine will restart and crashed due to demands for more power that the unit can provide.  Standard CS750M of Corsair adapts well to the minitower.

    There is no upgrade for the smaller models.  I don't think Booster 450W power units no longer exist that fit into the optical drive Bay 5.25 inches.

    http://www.Newegg.com/product/product.aspx?item=N82E16817104054

  • Dell Optiplex GX620 complete drivers for Win 7

    Hello. I have a system Dell, Optiplex GX620 with Intel Pentium D Inside processor. Now I want to install Windows 7 on my system, but its pilots are difficult to find and download. Please tell me that from where I download its complete drivers.

    Visit the Dell web site, click support at the top of the page.  Select support for individuals, enter the number of service from your computer.  If there are no Windows 7 drivers, then you probably won't be able to upgrade your system to Windows 7 and to find all the drivers you need.

Maybe you are looking for