Supervisor password

Similar Questions

• Satellite Pro C660-29W. How to remove the supervisor password

  Hi all
  I've been locked out of my bios and I don't know the password. My little brother was playing with my laptop computer and accidentally set the supervisor password. Is it possible that I can recover the password or reset it? I really need to change my boot sequence as I just bought a new SSD and need to format my laptop. Suggestions will be highly appreciated.

  Here's my version of bios and details of laptop

  Toshiba satellite Pro C660-29W

  CPU Intel Core i5 2410 M

  8 GB Ram DDR3

  BIOS: BIOS FRIEND - installation utility Aptio
  BIOS system ver: 1.50
  THIS Version: 1.50

  Thank you

  Supervisor password is very important safety device and a kind of reset of the user is not possible. You can cancel it, but you must know the correct password to confirm that you are the real owner computer laptop.

  Toshiba provider in your country can help you with this. You just approve that you are owner of the laptop, and they can cancel it for you. Of course, you must pay for it.

  As far as I know, there are several techniques for the removal of password and it depends on phone model.

  Contact the closest Toshiba ASP and ask for help.

• Supervisor password and BIOS settings

  When I boot into the bios via esc and F1, it doesn't let me go to all other pages, said the supervisor password is saved but does not prompt you to enter a password for the supervisor to make changes. I updated the bios to 2.0 version, but that didn't make a difference. I need to change the boot order but can not enter to change.

  Someone at - it ideas? How can I force to ask the supervisor password? Or let me go on other pages?

  Thank you

  Hello

  Are you sure you didn't put any user or supervisor password?
  Usually, you can remove it by using the password of Toshiba utility.

  In Toshiba Assist-> Secure, you will find the supervisor password and user password option.

  Remove these passwords in order to obtain full access to the BIOS settings

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!

• Sam S300 - how to get full Supervisor Password Prompt to enter BIOS?

  Have a Satellite PRO S300 (PSSB0A - 06500T), who is with Stop 7B BSOD-ing and I go into the solid part of the BIOS so I can reset the boot order to allow me to re - install Win XP.

  ESC - F1 puts me right in the small part of Page 1 of the ACPI BIOS configuration. I know the supervisor password! So, how do to a password prompt that will allow me in the two pages of the configuration of the BIOS.

  I tried F12 at startup to enter the boot options on the Toshiba splash screen, but it does not work.

  I think you hold a key in the market. Try holding the "INS" key to get the supervisor password to appear prompt.

• Satellite Pro S300 - how to enter the supervisor password?

  Hello

  I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.

  How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.

  A big thank you.

  Hello

  On this that I can only say, check your user manual! ;)

  There, I created the following information:
  + C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
  + This utility allows you to do the following: +.
  + Register, remove, or change the supervisor password.
  + Create or cancel a supervisor password token +.

  Check this and then you should be able to remove the password if you know the current.

  Welcome them

• Portege M780 - supervisor password asked after sleep

  Hi all

  I think that hadou a bug in the BIOS M780. I put only a password the supervisor of all the 100 - odd machines we have. There are no other security settings enabled and when a computer falls into a deep sleep (ie. after a few hours) they get invited to enter the supervisor password when the awakening of the machine.

  All computers are running the latest version of the BIOS (2.10) and WIndows 7 64-bit. As we are a school we want to prevent children from starting from CD, etc..,.

  I have configured the Security section of the BIOS as follows;

  User password: not registered
  Supervisor password: saved
  HDD1/SSD1 Mode password: < user only >
  HDD user password: not registered
  TPM: disabled >

  Help or confirmation of the issue would be appreciated. See you soon!

  UPDATE: I have since discovered that the problem exists when waking up from hibernation, no sleep. I disbaled it via Group Policy for the management of the "Balanced" diet that has solved my problem now, although this behavior should not yet happen.

• Satellite Pro C660-29W: BIOS won't let me enter the supervisor password

  Computer is a satellite pro C660-29W-PSC1ME-00U00KEN

  I put a BIOS supervisor password (no user password is set). I know the password.

  If I hit F2 it penetrates into the text editor, but does not any possibility to enter the password, and while I can see there is no way to change anything.

  Any suggestions?

  If this can be useful?
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

• Error message when you set the supervisor password

  When I try to set a supervisor with Toshibas utility password password I get the following error message: "Set Supervisor Password function Fail!"
  Why is it not possible to set a supervisor password? I have not yet defined any other password.

  Clean U940 preinstalled with the factory settings and minute ago I ve tested supervisor password. Password has been saved successfully and without any error message.

  Have you tried to set the supervisor password in the BIOS settings directly?

• Satellite A210-1AP: supervisor password utility does not work for Win 7

  I have the utility supervisor password v2.00.05 for Win 7, but it is not working on Win 7 I can't change my password!

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1871687& rpn = PSAFGU & modelFilter = A210-ST1616 & SelCategorie = 3 & selFamily = 1073768663

  I used this link.

  Model short is psaele
  Where I can find all the drivers and all the utility for Win 7.

  Your laptop is not model portable American and you must use drivers of European support page.
  For now, Toshiba has not begun support Win7, but I hope it will happen soon. The question is if your laptop model will be supported Win7.

  In any case, I think you can use touchpad driver designed for A300, but it takes that Toshiba offers all drivers.

• Re: Portégé R700 - how to reset the BIOS/supervisor password?

  Hi all

  I just bought a used Portege R700 and want to reinstall Windows.
  I can't access the BIOS due to a configuration of PasswordUtility from Toshiba supervisor password. The previous owner did not provide this password.

  How can I reset it?

  Thank you

  Hi Spets

  You cannot reset the BIOS password. It must be done by the Toshiba authorised service provider. I'm sorry.

  If you need addresses and phone numbers, you can find it on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• L70-B-126 Toshiba supervisor password problem

  Hi, I have a problem.

  My son has set a supervisor password and forget it. How can I fix the problem and restart the BIOS do not the remove battery?

  Thanks for help.

  Any can help me pls?

• Invalid supervisor password satellite A60-124 HELP Please!

  I put a supervisor password, while I was on Windows xp.
  I wanted to put the password: "nonhyj14 'but I failed & entered' nonhyj &'". It's stupid because I'm a student in computer science. I have no shift key before pressing button 1 & 2 buttons. So when I started my laptop, windows not started and there is no start. Immediately after the message "in contact with toshiba" I saw "password:". I entered "nonhyj &'"but due to the fact that the characters"&"and"'" are special (that's what I read after I put my password probably not in my laptop documents) my password didn't work. So I would like to know:
  -If it is normal that windows will not start before I have to enter the supervisor password
  -What can I do to access my computer? is there any generic password I could get? I read the password of the bios that the solution is on the hardware side, but I don't want to open my computer is brand new. Should I send my computer to the toshibarepair?
  Please I need help & I apologise for my strange English

  PLEASE, I BEG YOU. Is there someone who can help me?

• Satellite Pro A200 - Supervisor Password Setup Utility fails

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
  BIOS version is now 2.20 - WIN32

  After the installation of the operating system, I started to install different drivers and utilities to download them from the Toshiba site.

  When I try to install the "utility supervisor password" Setup fails with a box of message that says "serial number is not valid.
  Same problem with a different Installer: "utility of Support Flash Cards.

  Someone knows how to solve this problem and what serial number is not valid?

  Thanks in advance,

  mme000

  Hello Hana

  If someone has to take care of the warning, it's Microsoft. They offer something new and they know with certainty that he could have different negative influence on the operating system running well.

  Toshiba may just try to react and change has tools and utilities, but it's not easy. you will see that soon or later Toshiba will offer updates for all non-working stuff. The same is with WXP SP2.

  By the way: interesting Toshiba on Vista SP1 - http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm article

  Good bye

• Utility supervisor password does not work after update Vista

  I updated my computer that I brought in October 2006 PSP AOE P100 227 to Vista.
  I noticed that the supervisor password utility does not work. I downloaded the new software for this toshiba that was released yesterday but the wissard installation continues to indicate the serial number invalied...

  How to make this work?

  Hello

  Did you choose the good laptop of form pilot?
  Your laptop is Satellite P100-227 and serial number must begin with PSPA0E-xxxxx
  Is why we choose the password since the P100 utility area (PSPA0E).
  It seems now that the 1.39.50.7C version is the most recent.

  Please post back if it works or not.

• Where to insert the BIOS on Portege Z830 supervisor password?

  + Number description: +.
  I can access BIOS through F2 on my Z830.
  The installation of the system is listed, but cannot be changed.
  The BIOS supervisor password is set, and I know.
  There is no prompt like ' insert password: "."
  * Please help me find the way how to insert it.*

  (I can also run the system configuration utility.

  There is a prompt "Insert password."
  * If I insert my password it works.*
  But in the utility are some parameters (for example Intel Rapid Start) is missing.)

  BIOS version: 1.8
  8.1 Windows 64-bit

  Post edited by: micko

  Hello

  The password of the BIOS and the supervisor password can be removed in the area of security of BIOS.

  Please also check this Toshiba document.
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.
  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key