DELL Poweredge 2900 - disk failure

Similar Questions

• Dell PowerEdge 2900 RAID and drive down

  I have a Dell PowerEdge 2900 server. The primary transmission table has three drives and RAID 5. The system came this way, and it has been humming for quite a long time. Recently, one of the disks has deteriorated and the light on the drive flashes green and light amber. The light amber, I figured, it means that there is a problem with the drive and must be replaced. Then, I found a replacement on Amazon.com drive and installed (the drive is hot, but my cold started to be sure). I installed the drive, but keeps flashing green and amber light.

  I didn't know that I shouldn't have to replace the drive in this way, so I will now try to figure out what to do next. I hoped to reallocate the foreign disk so that I can use it, but my server always shows the reader, not having even if the new replacement drive is in the slot, now.

  I'm running PERC 5 / I integrated utility of Configuration Bios 1.04 - 019 a

  I started the server and you press CTRL-R. I've highlighted the controller and press the F2 key, what is operations. When the operations window opens, there are three menu items:

  Create new VD
  Zero Config reset
  Foreign config

  The only thing that I am allowed to do in this menu is to reset the configuration. I can't move my cursor upwards or downwards for one of the other choice of two menu.

  Scroll when the virtual disk and he discovers, it still shows the first two discs and a lack.

  When I press CTRL + N to display the next screen, I see a player listed as failed.

  How can I rebuild my RAID with this new drive? If I can't do it, what is the best way to remove the RAID and start over? If I delete the RAID and do it again (and if my replacement drive is indeed well), how can I make sure that my server not to see it, not having so that I can start using it?

  Alternating flashing green/orange means that the disc is in a status of predictive failure. What OS is running system? If you hotswap drive next failure they may possibly other issues table because the drive was online and participating in the table with errors on the disk. The adequate alternative method is to use our software Openmanage Server Administrator to run a consistency check on the table and then the drive offline. Once this has been done you can then swap the drive. It seems that in your case, that the new drive had bad data copied on it and it made a predictive failure as well. We want to do is run our hard drive diagnostics and test drives in the system.

  http://downloads.Dell.com/FOLDER01456532M/1/Dell-onlinediags-Win32-2.30.0.70.exe

  Install and run the GUI version in the start menu. In the left pane select the PERC 5 and then in the lower right pane select quick test and then to run tests.

• Power supply by DELL PowerEdge 2900 [MS]

  Buongiorno,

  sewn da parte di STUDIO_C, a ' azienda rivenditrice di materiale informatico.

  Avrei need di una quotazione by server UN ad add una seconda PSU Dell Poweredge 2900 dqstayn:

  Grazie.

  Offerta inviata: Offerta Dell n ° client 15487734: IT2881869 - STUDIO_C DI MARIANNA FABRI

  * Offerta offers great al successivo giorno lavorativo (eccetto che in caso di problemi di reperimento parte) con retreat posticipato del guasto *.

  Speaking saluti

  Manual

• Hard drive SAS 1 TB per Dell PowerEdge 2900 [MS]

  Buonasera,

  avrei di una quotazione by a SAS hard drive need da 1 TB Seagate ST31000640SS da cute in UN Server knew sostituzione Dell PowerEdge 2900

  Saluti,

  Enrico

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Is - this motherboard for Dell Poweredge 2900 gen. I, or GEN III

  Hi @ all,

  I recently this MB + accessories from a friend and I wanted to get this in life now. But to do this, I need some information about it. If I can get the right processors

  According to my friend, this MB support socket 775 CPU, but according to the data sheet @ dell.com, it supports socket 771 processor. Now, I'm a little confused about the...

  the MB model is: CN-0TM757-13740 - 74G - 0278 REV A01

  I hope that someone can give information me...

  Thanks in advance!

  Greetings from the Germany

  Benny

  I'll add pictures to this post as well

  

  It is a mother Board of generation 1 for a PowerEdge 2900 server.

  Your friend is wrong, the documentation is right (go figure): Socket 771.

  Xeon 5160 is the best processor released for this version of Office.

• Dell PowerEdge 2900 - need to use internal drives for RAID

  Hi all

  I am the I.T. guy for small business from my father. I help them on the side.

  They have recently purchased a PowerEdge 2900 server used with 4 internal SCSI drives

  This server also has a Dell SAS 5 / i integrated controller

  I want to install Windows 2008 R2 standard on this server and use it as a file server and a place to host QuickBooks Enterprise.

  The problem, in that I am running is that I can't find in the Bios or anywhere in the server startup utilities where I can configure the 4 internal drives as a RAID 5 array. I want to do this and THEN install the Windows Server operating system. I used the last Build Server utility Dell and also updated all the firmware to the latest versions. The Build Server utility doesn't let me configure the RAID array.  What I'm missing here?

  Thank you very much for your help!

  I upgraded to a PERC 6 / i integrated RAID controller and now problem is solved. Just need a new controller internal RAID.

  Problem is solved!

• Dell xps 8100; Disk failure hard error 2000-0142 0 self test status 79

  Hi guys, I was wandering in the forums for a few hours, now looking for ana response to this question, and can't find anything clear. I have a XPS 8100 that I run a diagnostic and received a 2000-0142 error code that says MSG: error code 2000-0142 hard drive FAILURE 0 self-test status: 79 based on what I read in the forum is that there is a disk failure, and the only recourse is to solve the problem in my view is to replace the drive. Firstly, can someone please give me an absolute confirmation that it is indeed what I have to do, or is there something else I should do to fix this problem first? If a replacement drive is there someone could please tell me how can I do to get my OEM software off the coast of the partition recovery and on my new drive. I now office preinstalled and, of course, premium Windows 7 I would like to see on my new hard drive and I was not provided with one of the disks at the time of purchase. Thanks in advance to all those who respond

  Hi XPS8100kid,

  Welcome to the Dell Community Forum.

  The 200-0142 error is for hard drive failure and you need to replace the hard drive.

  Since the hard drive has not, you would not be able to access the partition recovery on it. Data would be lost and the software already installed on your computer will need to be reinstalled.

  Windows 7 will need to be installed on the new hard drive. Please click the link below to get the procedure of re - install Windows 7.

  http://Dell.to/15MYHsz

  If based in the United States, you can ask for the backup drives by clicking the link below:

  http://Dell.to/Zj7oHA

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Dell PowerEdge 2900

  Buonasera

  avrei need di UN preventivo per sostituzione di UN riflettore ridondante 930W cod.

  DP/N 0KX823 da sul Server PowerEdge 2900 con service Tag 2JS694J fuori co.

  Grazie

  Speaking saluti

  Giorgio Guizzonato

  Buongiorno,

  will one OTS ' email al fine di poter manage the request.

  Grazie

  Marco

• (Redirected) PowerEdge 2950 - disk failure

  Buon giorno

  HO a PowerEdge 2950 cui non riesco a qa Server da collegarmi console (window sin corso accesso).

  failure of disco 3 he display tell

  STO pensando di riavviare comunque server of it

  My devo acquistare UN disco in sostituzione.

  Come posso fare.

  Grazie by it support

  Sartore franco-

  ADMIN NOTE: replace character removed according to the TOU >

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• Need help with a dell Poweredge 2900

  Hello and thank you for taking the time to look at my post. I'm new to the part of the server of having to learn for my new job and the computer. at the moment I am working on the poweredge server 2900 of the company. the main person of tech IT is eager to start the operating system, the front-wheel drive, but whenever I tried to install the server in the window on them. they appear at all. I went into the raid controllers and they appear but none where els. He said that it had removed them or something, so I had to re install the configuration for the raid controller will pick up. I don't know if what he wants can happen. I know possible with normal computer, but like I said. I'm still new to the part of the entire server from the computer. Thanks for any help in advice :)

  You have to be careful with the use of the following words, because it is confusing if evil is used:

  Disks - physical hard drives used to store data
  Drivers - software used to tell the operating system how to use a particular device

  Start CTRL-r, highlight the controller on the VD MGMT, F2 screen, Create/New... don't forget to tick the boxes advanced and Initialize When creating new arrays. With two players, you can create a RAID 0 or RAID 1 - again, don't use not RAID 0. (If all tables exist, delete them all first.)

  Once the table/VD has been created, you can start the OS installation disc to install. There is NO need to define "master boot record"... This will be done automatically during the installation of the OS.

  What OS you install? With 2003, you must load the drivers during installation... Avoid using too much at this point: 2003. With 2008 and later versions, the drivers are included, it is not necessary to load them during installation.

• Sostituzione Player DVD in a Dell PowerEdge 2900 fuori co

  Con sistema di disco fare L'immagine del Clonezilla, mi sono che people wanting it player del DVD server (player usato) solo in fase di sommergibili del sistema no Spannplatte, led che blinka furiosamente e spingendo ripetutamente it looping di espulsione he carried CD non esce.

  I wanted sapere che tipo di player e e che tipo di interfaccia ha (sata?) in modo da sostituirlo per poter fare L'immagine del sistema.

  Grazie

  Fausto Bolognesi

  Salve,

  nel PE 2900 esistono versioni, verificare should both it sul P/N player. Ha una quotazione by una sostituzione di need?

  Grazie

  E.C.

• PowerEdge 2900 hard failure [MS]

  Buongiorno, quotazione mi need di UN HDD da 300 GB Raid 5 led by he ns. Server fuori co.

  It ha the sigla disco: ST3300656SS

  Grazie.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  Address 2:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Dell PowerEdge 2900 Gen 3 storage issue

  Server is updated the firmware and the BIOS has to SAS6 6i controller. Operating system is Ubuntu Server LTS 14.04.

  Drive is a 4 to Seagate...

  Appears in gdisk and present as only 2 TB. If I pop the drawer and put it in a server Win2014R2 with UIEF/EFI BIOS, it says 4 TB.

  Is this a problem with the system BIOS or the firmware of the controller?

  Hello

  MAFoElffen

  Is this a problem with the system BIOS or the firmware of the controller?

  There is no problem. Maximum drive size supported on the 6 SAS is 2 TB.

  Thank you

• PowerEdge 2900 switchable hot

  I have a Dell PowerEdge 2900 running windows Small Business SERVER 2003, we will be taken out of service soon, but we just had a departure by car to go bad - seeing yellow flashes and error on LCD server message: 'E1 H10 HDD1 fault.'   daily backups and weekly regular running properly because of corruption, then I copied the table as a security measure.  I bought a new drive identical to the 4 existing disks that are configured as Raid 1.

  The drive is a:
  341-4430 750 GB 7.2 K rpm Universal SATA 3Gbps 3.5-inch hard drive

  The raid controller is:
  341-5754 1 SAS/SATA embedded RAID 1, PERC 6 / i integrated/SAS6/iR

  Can I leave the server running and pull the wrong drive and drag the new, without running applications before or after this procedure, and will be automatically rebuild the raid?

  I know that I need to replace the server.  But my immediate need is to solve the problem of bad disc, and I'd appreciate any advice or a link to the instructions in this procedure.

  We are a small non-profit and have none of the staff and no budget assistance, or I would have called in help.

  Thank you

  Jeff

  It is a Dell application that will interface directly with the hardware. It must be installed on any Dell server that you manage. On the downloads page, it is called OpenManage Server Administrator - Managed Node, use the 32-bit version.

• PowerEdge 2900 (and 2950) with PERC 5i - extend Raid 5

  Hello

  I have a Dell (PowerEdge 2900) server with a Raid PERC 5i (with BBWC) controller and 4 SATA drives installed (a virtual disk Raid 5, Windows 2008).

  Now I have an extra drive (same capacity, same speed) and installed on the server.

  I tried to expand the existing virtual disk (and the disk group) with the new physical disk drive in the BIOS of the controller and openmanage server administrator (managed node) running on windows.

  But it is not possible to do with this Raid Cntrl?

  Is there a way to do this without loss of data and maintenance of raid 5 redundancy?

  The same procedure I need to do on a PE2950 (PERC5i)

  Thank you and best regards,

  loop11

  What have you tried exactly, and what has happened or what have you seen?  You did not mention anything that leads me to believe that you tried this in the right place :)

  The PERC 5 / I can do without a doubt:

  With the disc, go to OMSA, PERC, case/bottom of basket, storage, physical disks and make sure your drive shows ready.

  If ready, go to the OMSA, storage, PERC, virtual disks, select Reconfigure in the drop down menu to your RAID 5, follow the wizard to add the disk.

  If the record shows the foreign, go to the OMSA, storage, PERC, Information/Configuration (link at the top of the page), click on foreign/clear in the dropdown menu, then follow the directions above.