Hard drive SAS 1 TB per Dell PowerEdge 2900 [MS]

Similar Questions

• This hard drive is not supported by Dell

  I have Dell PowerEdge 2900 with 5 SAS drives in a massive RAID. All five disks SEAGATE ST373355SS 73 Gb. a few days ago one of those readers start flashing orange LED on the front of the server and also to make the mechanical noise. I do not have the same disks and I was remove the defect of the disc and insert SEAGATE ST3146356SS 146 GB. After installing a new disk in my server Hi flashes green LED power and data reading. This means that everything is ok, works salvation! Then I launch Dell PowerEdge Ver.2.9 diagnosis and saw a status of this discs - this hard drive is not supported by Dell.
  Can someone told me there is a problem or not and how to fix it?

  

  Dell uses the 'standard' of different sellers drive models, but the manufacturers loading a custom firmware on the Dell drives certified to work seamlessly with Dell controllers. Dell firmware update will not work on non Dell readers, even if it's for the exact model.

• Dell PowerEdge 2900 RAID and drive down

  I have a Dell PowerEdge 2900 server. The primary transmission table has three drives and RAID 5. The system came this way, and it has been humming for quite a long time. Recently, one of the disks has deteriorated and the light on the drive flashes green and light amber. The light amber, I figured, it means that there is a problem with the drive and must be replaced. Then, I found a replacement on Amazon.com drive and installed (the drive is hot, but my cold started to be sure). I installed the drive, but keeps flashing green and amber light.

  I didn't know that I shouldn't have to replace the drive in this way, so I will now try to figure out what to do next. I hoped to reallocate the foreign disk so that I can use it, but my server always shows the reader, not having even if the new replacement drive is in the slot, now.

  I'm running PERC 5 / I integrated utility of Configuration Bios 1.04 - 019 a

  I started the server and you press CTRL-R. I've highlighted the controller and press the F2 key, what is operations. When the operations window opens, there are three menu items:

  Create new VD
  Zero Config reset
  Foreign config

  The only thing that I am allowed to do in this menu is to reset the configuration. I can't move my cursor upwards or downwards for one of the other choice of two menu.

  Scroll when the virtual disk and he discovers, it still shows the first two discs and a lack.

  When I press CTRL + N to display the next screen, I see a player listed as failed.

  How can I rebuild my RAID with this new drive? If I can't do it, what is the best way to remove the RAID and start over? If I delete the RAID and do it again (and if my replacement drive is indeed well), how can I make sure that my server not to see it, not having so that I can start using it?

  Alternating flashing green/orange means that the disc is in a status of predictive failure. What OS is running system? If you hotswap drive next failure they may possibly other issues table because the drive was online and participating in the table with errors on the disk. The adequate alternative method is to use our software Openmanage Server Administrator to run a consistency check on the table and then the drive offline. Once this has been done you can then swap the drive. It seems that in your case, that the new drive had bad data copied on it and it made a predictive failure as well. We want to do is run our hard drive diagnostics and test drives in the system.

  http://downloads.Dell.com/FOLDER01456532M/1/Dell-onlinediags-Win32-2.30.0.70.exe

  Install and run the GUI version in the start menu. In the left pane select the PERC 5 and then in the lower right pane select quick test and then to run tests.

• DELL Poweredge 2900 - disk failure

  Hello

  We have an old Dell Poweredge 2900 our SQL Server database running server.  Last week, we discovered that Raid 5 is degraded and disk 0 disk 1 is seeing completely to the bottom and the poster.  We were already down, so even if we had it running by buying a replacement of the SAS 146 GB 10 k disk we would still be short of storage of data of space.  I bought a SAS Seagate Cheetah 15 k 600 GB ST3600057SS and I would like to replace the failed drive with it.

  Question:

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  (2) my replacement of a 146 GB with a 600 GB can work?

  Please for your advisor as this database server is essential for my operation of the company.

  Thanks in advance

  Hello.

  ISOSA

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  Download OpenManage Server Administrator v7.4.0.2 form this link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=MGRG4

  ISOSA

  (2) my replacement of a 146 GB with a 600 GB can work?

  Replacing 146 GB with 600 GB of disk drive will not provide any extra space you need because the table will use only 146 GB of total space 600 GB on the new drive. What controller you have installed? In case the only option available for you that your controller does not support the extension of ability online (ECO) could be to backup your data, delete the existing RAID array and re - create another table with the new readers of 600GO. Restore data from backup and re-install the operating system.

• Power supply by DELL PowerEdge 2900 [MS]

  Buongiorno,

  sewn da parte di STUDIO_C, a ' azienda rivenditrice di materiale informatico.

  Avrei need di una quotazione by server UN ad add una seconda PSU Dell Poweredge 2900 dqstayn:

  Grazie.

  Offerta inviata: Offerta Dell n ° client 15487734: IT2881869 - STUDIO_C DI MARIANNA FABRI

  * Offerta offers great al successivo giorno lavorativo (eccetto che in caso di problemi di reperimento parte) con retreat posticipato del guasto *.

  Speaking saluti

  Manual

• Dell PowerEdge 2900 - need to use internal drives for RAID

  Hi all

  I am the I.T. guy for small business from my father. I help them on the side.

  They have recently purchased a PowerEdge 2900 server used with 4 internal SCSI drives

  This server also has a Dell SAS 5 / i integrated controller

  I want to install Windows 2008 R2 standard on this server and use it as a file server and a place to host QuickBooks Enterprise.

  The problem, in that I am running is that I can't find in the Bios or anywhere in the server startup utilities where I can configure the 4 internal drives as a RAID 5 array. I want to do this and THEN install the Windows Server operating system. I used the last Build Server utility Dell and also updated all the firmware to the latest versions. The Build Server utility doesn't let me configure the RAID array.  What I'm missing here?

  Thank you very much for your help!

  I upgraded to a PERC 6 / i integrated RAID controller and now problem is solved. Just need a new controller internal RAID.

  Problem is solved!

• Su failure hard drive SAS su md1000 [MS]

  Knew a MD1000 is con scheda raid PERC 5/E è una guasto of hard drive.

  Al momento ho disabilitato it beep. Spia rossa e lampeggiante. Hard disk e

  SAS 278,88 Gb DELL ST3300655SS Serial 3LM48ZZ6

  He guasto disco if trova alla posizione 0:0:2 e ed it primo disco di a raid 5 clearly da 7 brain.

  I certainly would.

  Grazie anticipatamente

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• First hard drive 0 not found on Dell Windows XP computer

  Original title: Hard Drive not found

  I have a Dell Dimension 4550 Series computer using Windows XP SP3.  At startup the following message now "Primary Hard Disk Drive 0 not found".  Only the option F1 or F2 gives me or what appears to be a viable solution.  Impossible to access anything whatsoever beyond this screen.  All connections look OK.  Resolution ideas are welcome!  Thank you.

  Hi MartinL960,

   

  Remember to make changes before this problem?

  It is a hardware problem with Dell, through my research I found that users encounter similar problem solved the problem by making changes to hard disk parameters in the BIOS.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Since the resolution requires the modification of the BIOS that is risky, I recommend you contact dell for more specialist on this question help

  Dell support

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&CS=19&l=en&s=DHS

• No number for a hard drive 1 TB external backup Dell Service tag

  I bought this external hard drive on an online site and it has now stopped working. When I try to go to dell support online, I need to enter a service number and my product has no service number... I entered all the other numbers printed on the hard drive, but it does not recognize one of these numbers... Desperate... Help, please... Sharad CN: 04RPHY-72627 - 31H - 029S SN: NA52YXAS REF: 1F5AP4-500

  Only systems transport service tags - no devices.

• Sound weird coming from the hard drive, every Min or 2-Dell Inspiron 15R SE 7520

  Not really sure if this is still a bad question. This player has not yet failed. It's just making a weird noise, I have no idea what could be the cause.

  http://www.YouTube.com/watch?v=XwYSdD4fyRU

  The ticking, in this video, is exactly the same. The only difference. Undermines the fact every 1 min, sometimes every 2 minutes... and sometimes all 3 or 4 minutes. And he just does the ticking sound once. not again and again.

  If a tick from time to time. You can hear only - when everything is guiet? Just a tick and it disappears for a while?

  Does that mean that my drive has failed? Reason why I'm asking. After a year of use, the hard drive has failed-It just died. Dell has replaced the disc/Msata too. It was near another year, with replacement. Is this a sign that I should back up and save all my info. Contact dell.

  IF kills laptop another disk hard-is there a chance of the motherboard is defective?

  Things that I've tried - defragment the disk, I even check and repair sectors... found nothing.

  Any help would be appreciated...

  thought about upgrading to an ssd, but I really want to do, if the motherboard is to kill hard drives?

  Thanks for reading

  Here I am again, a bit frustrated... Has achieved a good response when I posted... but nothing else after that... Different response of old Story/Issue...same... (((I thought of it out on mine)))

  Don't know if that's the right answer, but I thought that if there was someone out there with the same problem, it might give you some answers.

  After reading and Goggling... I found a few different answers... "My favorite, but NOT CORRECT"... Your drive is dying, you must back up all the files and save them to an external disk, before it fails... where there is a click or a bad sector... it will multiply and more.

  Of course, there is a simple answer from someone who knows nothing about the hard drive. But incorrect. Especially if you do not experience problems or blue screens.

  A hard click or clunk, may be two different things. Non of them pointing to a player out. Depending on the player, it could be a bad sector. It could be one of 2 things, "THERMAL CALIBRATION ROUTINES", or it could be "ADVANCE DRIVE PROTECTION".

  I don't understand how an any of them work, but a quick Google search should provide you with answers.

  On my drive a simple defrag helped. Now I hear the noise, every once and awhile. Sometimes I don't hear it at all in a session. You are not sure if it was a coincidence? But I feel much better knowing what to do.

  Thanks for reading my question and post

• This hard drive go in my old Dell Inspiron 6000? Please read for more details?

  It's the new hard drive, I want to put in my Dell Inspiron 6000:

  http://www.Newegg.com/product/product.aspx?item=N82E16822145176

  and it's my old hard drive that had broken down (this is the original hard drive came with my laptop, he is perfectly worked for a few years before breaking):

  http://www.compuvest.us/ProductDetails.aspx?ProductID=179815

  If this does not work can you suggest some that? Thank you.

  
  

• Need help with a dell Poweredge 2900

  Hello and thank you for taking the time to look at my post. I'm new to the part of the server of having to learn for my new job and the computer. at the moment I am working on the poweredge server 2900 of the company. the main person of tech IT is eager to start the operating system, the front-wheel drive, but whenever I tried to install the server in the window on them. they appear at all. I went into the raid controllers and they appear but none where els. He said that it had removed them or something, so I had to re install the configuration for the raid controller will pick up. I don't know if what he wants can happen. I know possible with normal computer, but like I said. I'm still new to the part of the entire server from the computer. Thanks for any help in advice :)

  You have to be careful with the use of the following words, because it is confusing if evil is used:

  Disks - physical hard drives used to store data
  Drivers - software used to tell the operating system how to use a particular device

  Start CTRL-r, highlight the controller on the VD MGMT, F2 screen, Create/New... don't forget to tick the boxes advanced and Initialize When creating new arrays. With two players, you can create a RAID 0 or RAID 1 - again, don't use not RAID 0. (If all tables exist, delete them all first.)

  Once the table/VD has been created, you can start the OS installation disc to install. There is NO need to define "master boot record"... This will be done automatically during the installation of the OS.

  What OS you install? With 2003, you must load the drivers during installation... Avoid using too much at this point: 2003. With 2008 and later versions, the drivers are included, it is not necessary to load them during installation.

• Dell PowerEdge 2900

  Buonasera

  avrei need di UN preventivo per sostituzione di UN riflettore ridondante 930W cod.

  DP/N 0KX823 da sul Server PowerEdge 2900 con service Tag 2JS694J fuori co.

  Grazie

  Speaking saluti

  Giorgio Guizzonato

  Buongiorno,

  will one OTS ' email al fine di poter manage the request.

  Grazie

  Marco

• Is - this motherboard for Dell Poweredge 2900 gen. I, or GEN III

  Hi @ all,

  I recently this MB + accessories from a friend and I wanted to get this in life now. But to do this, I need some information about it. If I can get the right processors

  According to my friend, this MB support socket 775 CPU, but according to the data sheet @ dell.com, it supports socket 771 processor. Now, I'm a little confused about the...

  the MB model is: CN-0TM757-13740 - 74G - 0278 REV A01

  I hope that someone can give information me...

  Thanks in advance!

  Greetings from the Germany

  Benny

  I'll add pictures to this post as well

  

  It is a mother Board of generation 1 for a PowerEdge 2900 server.

  Your friend is wrong, the documentation is right (go figure): Socket 771.

  Xeon 5160 is the best processor released for this version of Office.

• Sostituzione Player DVD in a Dell PowerEdge 2900 fuori co

  Con sistema di disco fare L'immagine del Clonezilla, mi sono che people wanting it player del DVD server (player usato) solo in fase di sommergibili del sistema no Spannplatte, led che blinka furiosamente e spingendo ripetutamente it looping di espulsione he carried CD non esce.

  I wanted sapere che tipo di player e e che tipo di interfaccia ha (sata?) in modo da sostituirlo per poter fare L'immagine del sistema.

  Grazie

  Fausto Bolognesi

  Salve,

  nel PE 2900 esistono versioni, verificare should both it sul P/N player. Ha una quotazione by una sostituzione di need?

  Grazie

  E.C.