Sostituzione Player DVD in a Dell PowerEdge 2900 fuori co

Similar Questions

• Hard drive SAS 1 TB per Dell PowerEdge 2900 [MS]

  Buonasera,

  avrei di una quotazione by a SAS hard drive need da 1 TB Seagate ST31000640SS da cute in UN Server knew sostituzione Dell PowerEdge 2900

  Saluti,

  Enrico

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Dell PowerEdge 2900 RAID and drive down

  I have a Dell PowerEdge 2900 server. The primary transmission table has three drives and RAID 5. The system came this way, and it has been humming for quite a long time. Recently, one of the disks has deteriorated and the light on the drive flashes green and light amber. The light amber, I figured, it means that there is a problem with the drive and must be replaced. Then, I found a replacement on Amazon.com drive and installed (the drive is hot, but my cold started to be sure). I installed the drive, but keeps flashing green and amber light.

  I didn't know that I shouldn't have to replace the drive in this way, so I will now try to figure out what to do next. I hoped to reallocate the foreign disk so that I can use it, but my server always shows the reader, not having even if the new replacement drive is in the slot, now.

  I'm running PERC 5 / I integrated utility of Configuration Bios 1.04 - 019 a

  I started the server and you press CTRL-R. I've highlighted the controller and press the F2 key, what is operations. When the operations window opens, there are three menu items:

  Create new VD
  Zero Config reset
  Foreign config

  The only thing that I am allowed to do in this menu is to reset the configuration. I can't move my cursor upwards or downwards for one of the other choice of two menu.

  Scroll when the virtual disk and he discovers, it still shows the first two discs and a lack.

  When I press CTRL + N to display the next screen, I see a player listed as failed.

  How can I rebuild my RAID with this new drive? If I can't do it, what is the best way to remove the RAID and start over? If I delete the RAID and do it again (and if my replacement drive is indeed well), how can I make sure that my server not to see it, not having so that I can start using it?

  Alternating flashing green/orange means that the disc is in a status of predictive failure. What OS is running system? If you hotswap drive next failure they may possibly other issues table because the drive was online and participating in the table with errors on the disk. The adequate alternative method is to use our software Openmanage Server Administrator to run a consistency check on the table and then the drive offline. Once this has been done you can then swap the drive. It seems that in your case, that the new drive had bad data copied on it and it made a predictive failure as well. We want to do is run our hard drive diagnostics and test drives in the system.

  http://downloads.Dell.com/FOLDER01456532M/1/Dell-onlinediags-Win32-2.30.0.70.exe

  Install and run the GUI version in the start menu. In the left pane select the PERC 5 and then in the lower right pane select quick test and then to run tests.

• DELL Poweredge 2900 - disk failure

  Hello

  We have an old Dell Poweredge 2900 our SQL Server database running server.  Last week, we discovered that Raid 5 is degraded and disk 0 disk 1 is seeing completely to the bottom and the poster.  We were already down, so even if we had it running by buying a replacement of the SAS 146 GB 10 k disk we would still be short of storage of data of space.  I bought a SAS Seagate Cheetah 15 k 600 GB ST3600057SS and I would like to replace the failed drive with it.

  Question:

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  (2) my replacement of a 146 GB with a 600 GB can work?

  Please for your advisor as this database server is essential for my operation of the company.

  Thanks in advance

  Hello.

  ISOSA

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  Download OpenManage Server Administrator v7.4.0.2 form this link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=MGRG4

  ISOSA

  (2) my replacement of a 146 GB with a 600 GB can work?

  Replacing 146 GB with 600 GB of disk drive will not provide any extra space you need because the table will use only 146 GB of total space 600 GB on the new drive. What controller you have installed? In case the only option available for you that your controller does not support the extension of ability online (ECO) could be to backup your data, delete the existing RAID array and re - create another table with the new readers of 600GO. Restore data from backup and re-install the operating system.

• Power supply by DELL PowerEdge 2900 [MS]

  Buongiorno,

  sewn da parte di STUDIO_C, a ' azienda rivenditrice di materiale informatico.

  Avrei need di una quotazione by server UN ad add una seconda PSU Dell Poweredge 2900 dqstayn:

  Grazie.

  Offerta inviata: Offerta Dell n ° client 15487734: IT2881869 - STUDIO_C DI MARIANNA FABRI

  * Offerta offers great al successivo giorno lavorativo (eccetto che in caso di problemi di reperimento parte) con retreat posticipato del guasto *.

  Speaking saluti

  Manual

• Dell PowerEdge 2900

  Buonasera

  avrei need di UN preventivo per sostituzione di UN riflettore ridondante 930W cod.

  DP/N 0KX823 da sul Server PowerEdge 2900 con service Tag 2JS694J fuori co.

  Grazie

  Speaking saluti

  Giorgio Guizzonato

  Buongiorno,

  will one OTS ' email al fine di poter manage the request.

  Grazie

  Marco

• Is - this motherboard for Dell Poweredge 2900 gen. I, or GEN III

  Hi @ all,

  I recently this MB + accessories from a friend and I wanted to get this in life now. But to do this, I need some information about it. If I can get the right processors

  According to my friend, this MB support socket 775 CPU, but according to the data sheet @ dell.com, it supports socket 771 processor. Now, I'm a little confused about the...

  the MB model is: CN-0TM757-13740 - 74G - 0278 REV A01

  I hope that someone can give information me...

  Thanks in advance!

  Greetings from the Germany

  Benny

  I'll add pictures to this post as well

  

  It is a mother Board of generation 1 for a PowerEdge 2900 server.

  Your friend is wrong, the documentation is right (go figure): Socket 771.

  Xeon 5160 is the best processor released for this version of Office.

• Dell PowerEdge 2900 - need to use internal drives for RAID

  Hi all

  I am the I.T. guy for small business from my father. I help them on the side.

  They have recently purchased a PowerEdge 2900 server used with 4 internal SCSI drives

  This server also has a Dell SAS 5 / i integrated controller

  I want to install Windows 2008 R2 standard on this server and use it as a file server and a place to host QuickBooks Enterprise.

  The problem, in that I am running is that I can't find in the Bios or anywhere in the server startup utilities where I can configure the 4 internal drives as a RAID 5 array. I want to do this and THEN install the Windows Server operating system. I used the last Build Server utility Dell and also updated all the firmware to the latest versions. The Build Server utility doesn't let me configure the RAID array.  What I'm missing here?

  Thank you very much for your help!

  I upgraded to a PERC 6 / i integrated RAID controller and now problem is solved. Just need a new controller internal RAID.

  Problem is solved!

• Need help with a dell Poweredge 2900

  Hello and thank you for taking the time to look at my post. I'm new to the part of the server of having to learn for my new job and the computer. at the moment I am working on the poweredge server 2900 of the company. the main person of tech IT is eager to start the operating system, the front-wheel drive, but whenever I tried to install the server in the window on them. they appear at all. I went into the raid controllers and they appear but none where els. He said that it had removed them or something, so I had to re install the configuration for the raid controller will pick up. I don't know if what he wants can happen. I know possible with normal computer, but like I said. I'm still new to the part of the entire server from the computer. Thanks for any help in advice :)

  You have to be careful with the use of the following words, because it is confusing if evil is used:

  Disks - physical hard drives used to store data
  Drivers - software used to tell the operating system how to use a particular device

  Start CTRL-r, highlight the controller on the VD MGMT, F2 screen, Create/New... don't forget to tick the boxes advanced and Initialize When creating new arrays. With two players, you can create a RAID 0 or RAID 1 - again, don't use not RAID 0. (If all tables exist, delete them all first.)

  Once the table/VD has been created, you can start the OS installation disc to install. There is NO need to define "master boot record"... This will be done automatically during the installation of the OS.

  What OS you install? With 2003, you must load the drivers during installation... Avoid using too much at this point: 2003. With 2008 and later versions, the drivers are included, it is not necessary to load them during installation.

• Dell PowerEdge 1950 fuori co - sostituzione controller SAS [MS]

  Buongiorno,

  We have a problema con uno dei nostri Server PowerEdge 1950 (anno 2006): I brain rigidi are non più riconosciuti e sospettiamo che tratti del RAID SAS controller if. Vorremmo ask UN preventivo by a componente sostitutivo is possibile.

  Want cortesemente in pre-empted.

  Speaking saluti,

  Mario P.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Dell PowerEdge 2900 Gen 3 storage issue

  Server is updated the firmware and the BIOS has to SAS6 6i controller. Operating system is Ubuntu Server LTS 14.04.

  Drive is a 4 to Seagate...

  Appears in gdisk and present as only 2 TB. If I pop the drawer and put it in a server Win2014R2 with UIEF/EFI BIOS, it says 4 TB.

  Is this a problem with the system BIOS or the firmware of the controller?

  Hello

  MAFoElffen

  Is this a problem with the system BIOS or the firmware of the controller?

  There is no problem. Maximum drive size supported on the 6 SAS is 2 TB.

  Thank you

• HDD Sostituzione Server PowerEdge 2900 [SD]

  Ho need di supporto per sostituzione di da a 450 GB 15 k sulla macchina provider SAS hard drive:

  -Dell PowerEdge 2900

  Speaking saluti

  Dear client,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN message privato.

  Nel caso in cui as aver need di assistenza telefonica is Pagaré a di COTERMINUSticket.

  SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

  By request, we have our o di need any it client codice di vecchia quotazione o.

  Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

  By the spedizione:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione (is different)

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

   

  Domenico Severino

• Request preventivo sostituzione card mother server Dell PowerEdge R610

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al server Dell PowerEdge R610 fuori co Service Tag GGFN25J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Alberto Daponte

  IBN Savio Srl

  Buongiorno, the sto contattando via e-mail.

• PowerEdge 2900 switchable hot

  I have a Dell PowerEdge 2900 running windows Small Business SERVER 2003, we will be taken out of service soon, but we just had a departure by car to go bad - seeing yellow flashes and error on LCD server message: 'E1 H10 HDD1 fault.'   daily backups and weekly regular running properly because of corruption, then I copied the table as a security measure.  I bought a new drive identical to the 4 existing disks that are configured as Raid 1.

  The drive is a:
  341-4430 750 GB 7.2 K rpm Universal SATA 3Gbps 3.5-inch hard drive

  The raid controller is:
  341-5754 1 SAS/SATA embedded RAID 1, PERC 6 / i integrated/SAS6/iR

  Can I leave the server running and pull the wrong drive and drag the new, without running applications before or after this procedure, and will be automatically rebuild the raid?

  I know that I need to replace the server.  But my immediate need is to solve the problem of bad disc, and I'd appreciate any advice or a link to the instructions in this procedure.

  We are a small non-profit and have none of the staff and no budget assistance, or I would have called in help.

  Thank you

  Jeff

  It is a Dell application that will interface directly with the hardware. It must be installed on any Dell server that you manage. On the downloads page, it is called OpenManage Server Administrator - Managed Node, use the 32-bit version.

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you