Dell PowerEdge 2950 Backplane - error message: SAS B missing cable. Misconfigured?

Similar Questions

• PowerEdge 2950 Server error message: I1912 SALT full - how do I VIEW the log

  I have the error message scroll on the LCD screen. I know that I can go to the OpenManage Server Administrator and clear the log, but how do I SEE what is in the famous log before clearing it? And if I clean it without viewing that is in it, how can I check in a day or two to see if something happens? I can't find and answer to this anywhere on the web...

  Thank you!

  Hello

  You can use the DSET utility to create a report and it will be the newspaper. http://www.Dell.com/support/contents/us/en/19/article/product-support/self-support-knowledgebase/Enterprise-Resource-Center/Enterprise-Tools/Dell-system-e-support-tool

  You can also go to ctrl + E for the post to view the log.

• ESXi 3.5 on Dell Poweredge 2950 and Dell 6 GB/s card SAS HBA?

  Hello.

  I'm under ESXi 3.5 u4 on a Dell poweredge 2950 machine.

  I recently bought a Dell Powervault 124 t. autoloader with a HBA SAS 6 GB/s card.

  I installed the card SAS in the PE 2950, but now I can't seem to see in ESXi.

  Can someone help me with this?

  Thank you very much.

  I'm afraid that the Dell technician is correct.

  Someone at - it a link on ESX support not directly connected devices?

  This isn't the issue. The question is: do you have a link that shows devices supported?

  Reference Dell does support the autoloader Powervault 124 t. on ESXi 3.5?

  Have you checked the VMware HCL already, if the SAS controller is included/supported for ESXi version, you are running?

  There are a few articles which have tape readers running with Adaptec SCSI controllers, I don't see anything for ESXi 3.5 with a SAS controller still...

  Maybe there's a better chance to make this work with ESX 4.x with VMDirectPath

  André

• Dell PowerEdge 2950 of installation

  I'm testing DPM on a Dell PowerEdge 2950.  To make this work, I have need to configure IPMI if I can have a server go to safe mode and out of safe mode.  I've been Googling like crazy, but have been unable to find an answer on how to get this working.  Whenever I try to put my host in standby I get this message:

  vCenter has determined that it cannot resume host & lt; hostname & gt; standby; Therefore, the eve of the entry task was suspended.
  Confirm that IPMI/ILO is configured correctly for host & lt; hostname & gt;.  Or, configure vCenter to use WoL, making sure there are at least two or more hosts in the cluster, and then try the task again.

  A couple of things about this error: an it is a cluster two host (for testing purposes).  Two, I use Dell hardware so I have to use IPMI not ILO.

  I have connected my DRAC page and enabled IPMI over LAN, but I don't know what else to do here, and I don't know where all the parameters concerning this in vCenter or ESX.  Any help would be appreciated.

  Gunnar

  I used the setting of Dell OpenManage.

  Under system / main system / remote access, you can see:

  Select the IPMI Over LAN-> Yes (don't forget it is YES)

  SOIL active Yes

  XXXXXXXXXX MAC address

  IPv4 address

  IP address static Source

  YYYYY IP address

  In ESX, under Configuration / PowerManagement / properties I use:

  BMC IP: YYYYY

  BMC MAC: XXXXX

  André

• DELL PowerEdge 2950 PERC 5 / i

  Dear members,

  I have server Dell PowerEdge 2950, I need to install Windows 2003 Standard Edition and save it as a file server for my network.

  So I bought 2 TB SATA WD HDD, I would like to create RAID 1.

  As a trial, I connected two 145 GB SAS and a 2 TB SATA Bay and switch ON create RAID1.

  Please guide me how to create RAID 1 using PERC 5 / i utility of configuration?

  My version 5 PERC / i integrated 5.0.2.0003.

  Thank you

  Tony

  You cannot mix SAS and SATA drives in a RAID array.

• Dell PowerEdge 2950 P2V problem

  Physical server:

  Dell PowerEdge 2950

  Windows 2003 R2 Standard x 86 operating system

  Sheet music:

  Dell - hidden partition

  C: BONE

  D: Data1

  E: Data2

  F: Data3

  G: data4

  vSphere ESXi 4.1 (under license)

  ISCSI SAN

  vCenter Server

  I tried on cold hidden server with boot CD, but received the error "unable to determine the operating system invited."  Looks like that I don't have the driver for the Dell raid controller in the boot CD.

  I decided to go with the hot P2V using the plug-in for VirtualCenter.  I stop the SQL server service and disabled the firewall disabled the anti-virus tools.  Only two partitions (C and G) on the physical server must be in the new virtual machine.  So, I've selected partitions C and G and has increased the size of the drive at a time.  I made sure not to install the vmware tools and unchecked the option reconfigures.   The P2V conversion was successful.   But when I went to start the virtual machine, it starts with the 'VMWARE' logo and restarts immediately.  Restart the virtual computer so fast I can't even in the BIOS unless I hit the key several times.   I did the clonning with the hidden partition, but with the same problem.   There are no BSOD or any indication that the virtual machine cannot find the vdisks.   Called in vmware support.  They used webex for an hour, but could not fix.  Asked me to send in the logbundle.

  I HERE it if someone tell me what I am doing wrong?

  Thank you

  Another option is to install the Standalone Converter 3.0.3 on the PowerEdge, stop all services and performing the conversion.

  André

• VMware ESXi 4 on Dell PowerEdge 2950 CDROM missing in virtual machines

  Hi all

  I installed VMware 4.0 on my Dell PowerEdge 2950, and everything moved very well. I had the ISO image from the support site on the website of VMware and Dell. I installed both with the same problem, once installed, the CD-ROM will not be displayed in any virtual machine, I create.

  I changed the boot parameters, the order of the boot, played with the BIOS settings, and no matter what I do, when I start the virtual machine and open a console window and try to connect on the CDROM, a message displays saying that the device is disconnected.

  I have reinstalled Windows on the box, went to the site of support of Dell and applied each update BIOS patch and firmware of the box. Including the one for the TEAC CDROM, which is in my box.

  Anyone had this problem before? If so, how should I do? I really need this works quickly. Without a CDROM, I can't install software such as SQL Server and others.

  Kind regards

  Michael Lange

  I assume that you have added a CDROm for virtual machines?

  You then specify "logged in/connected to the power on" in the settings of VM page? (I know it's usually obvious.. .but I did it very mistaken once this week.. .accidentally added the CDROM to the VM wrong.)

  What OS your virtual machine is running and you have the installed VMTools?

  If issuing a VMtools install on a windows host, it works, then the Cd drive works as ESX uses the virtual CD Rom to install the tools.

• Buy a windows server license R2 ROK 2012 for a Dell PowerEdge 2950 bought in 2008 [MS]

  Hello

  I have a Dell PowerEdge 2950 with windows server 2008, I bought it in 2008.

  I want to upgrade to the new windows server R2 Foundation, purchasing a license ROK 2012.

  Is this possible? Where can I buy one of these?

  Thank you

  OTO Tortorella
  TeleType.it
  
  

  Buongiorno,

  He endured of Poweredge 2950 come sistemi al massimo do it 2008 server (even he 2008 r2).

  Speaking saluti

  Manual

• Error message: device is ready for use, and after a few minutes the error message "hardware Id missing.

  Original title: hardware Id missing

  I recently acquired a voice recorder HccToo 8 GB. However, whenever I connect it to my computer I get a message saying that the device is ready to use and after a few minutes the error message "hardware Id missing.
  The usb cable that connects to the camera has no problem (and should be universal). And I tried to connect to other computers on win 7 with the same results. I also watched online solutions, but this problem seems to apply mainly to phones.

  I would be grateful for any advice on what I can do about it.

  Hi Nikolai,

  Sorry for the late reply.

  Did you try to connect other USB devices and check the issue?

  If problem persists, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears.

  QtCore4.dlll error message

  Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears. Where can I find it and how do I reinstall it?

  Hello

  ·         Have you try installation or uninstalling any program like the SIMS 3 on your system?

   

  Method 1:

  The problem could be caused by some startup item or services that is loaded at startup.

  I suggest you perform the clean boot on your system and check if it helps to resolve the issue.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2:

  Most of the customers were facing this error by installing or playing SIMS 3 game, if you also face this problem while playing or to install this game, then you can check the link below and follow the steps provided by Shekhar S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/qtcore4dll-missing-error-while-playing-Sims-3/02735e2a-2ff6-4D29-8C8C-0852605734e2

   

• Loading software - error message: MSVBVM50.dll missing

  Tried to load the software on the computer Windows 8 that had been loaded properly on the Windows 7 computer.  Error message: MSVBVM50.dll missing.

  Please notify.

  Hello

  I'd be happy to help you try to install the software.

  Could you let me know what software you are trying to install and the installation media is?

  If you have not already the case, try to download the file from the link provided in this article from Microsoft Download Center:

  http://support.Microsoft.com/kb/180071/en-us

  If the problem persists, follow the steps in this article to resolve the compatibility issues:

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  You can also try running the System File Checker tool as shown in this article, if you continue to face problems with the missing file:

  http://support.Microsoft.com/kb/929833/en-us

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this helps. If you continue to have problems, please let us know.

• DISK BY DELL POWEREDGE 2950

  Buongiorno, TR e rotto UN drive hard nel Server Poweredge 2950. E' UN DELL BARRACUDA ES.2 manufactured by da SEAGATE 1000 GB con S/N 9QJ34S01 and P/N 9EF248-050 (Serial Attached SCSI - SAS).

  He disco fa parte di una configurazione RAID 1, che I like ripristinare al più presto.

  I like acquistarne uno ed avere un preventivo. I'm dati by engineering del preventivo e spedizione sono:

  A.m.. Architetti S.r.l.

  Viale Bruno Buozzi, 49

  00197 ROMA

  P.IVA e C.F. 04869451007

  VI prego di farmi turned out he con preventivo di price terms prima possibile.

  Grazie

  Speaking saluti

  Michele Angeletti

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  -ed email phone number

  Speaking saluti

  Manual

• PowerEdge 2950 HARD 500 GB SAS [MS] drive

  Abbiamo UN PowerEdge 2950

  Codice di matricola: |
  Codice di servizio rapido:

  Per questo Server above serve disco UN auswechseln: Seagate 500 Gb SAS 7.2 Potete fornirlo

  Potete inviarmi offerta al mio address e-mail:

  [email protected]

  Reference Dell SPA pulito gia' registrata come nostro fornitore

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione:
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• In XP, Dell 305V printer getting error message ' alignment error remove tape or try again.

  I changed my ink cartridges (removed protective tape) and Dungeon, error message: erreur error alignment, remove the tape or try again. I tried to line up once again, did not work. alignment page impressions / seems fine. so I tred to ignore alignment and print but it comes out of the Virgin. I downloaded mast set and did a scan and they couldn't find anything wrong, so now I'm asking here. I have a dell 305V printer

  Hello

  You can check the link that contains information about the error, you receive below: http://support.dell.com/support/edocs/systems/v305/en/ug/d0e6773.html#troubleshooting-chapter

• Upgrade of ram per server DELL PowerEdge 2950

  Buongiorno,

  necessitiamo di assistenza per UN PowerEdge 2950 venduto a nostro client nel 2008, by cui ormai fuori co (he e S/N FJ0C34J).

  It client vorrebbe fare della di 16GB ram upgrade.

  In attesa di risposta, in want pre-empted by attenzione

  Buongiorno,

  Unfortunately no vendiamo più banchi di memoria per questo modello di server.

  Who can find I banchi di memoria currently available alla vendita.

  Accessories.euro.Dell.com/.../genselector.aspx

  Marco