Dell PowerEdge R510

Similar Questions

• Dell poweredge R510 128 GB of RAM

  Hello.

  I want to upgrade my Dell PowerEdge R510 with 128 GB of RAM.

  Can I use the 16 GB of RAM x 8 double row? Like this a broken link has been removed from this post by Dell>

  Or I need memory command quad rank for my upgrade? And if so, Dell provides this type of RAM?

  Thanks in advance.

  Enzorik,

  The 16 GB x 8 DIMM you mentioned here

  are indeed certified replacements for the R510. They would be the DIMMs to use.

  I hope this helps.

• Dell PowerEdge R510 memory Conmfiguration

  Greetings,

  I have a Dell PowerEdge R510 with a SINGLE processor that currently has 16 GB of slots of RAM installed A1 - A4 are all filled with 4 GB memory modules. My questions are the following:

  1. Am I able to, another 8 GB or memory?
  2. Is only to have a CPU a problems with filling more memory?

  Think I found my answer here:

  en.Community.Dell.com/.../19645918

• Usb device ESXi 4.1.0 through material passtrough on Dell Poweredge R510

  Hello.

  I am trying to use one of the four usb ports on a Dell PowerEdge R510 inside an ESXi 4.1.0 260247 host for a XP Prof invited. I have the following PCI devices:

  With each of the devices ID 00:1 a. 0 00: 1 d: 3 comments XP correctly will not start. When I attach the 00:1d.7 device boots comments, but then there is a problem with the device driver. I tried the chipset drivers for W2003 from dell (http://support.euro.dell.com/support/downloads/download.aspx?c=de & cs = debsdt1 & l = a & s = bsd & releaseid = R269378 & SystemID = PWE_R510 & servicetag = & os = WNET & osl = GE & deviceid = 17195 & devlib = 0 & typecnt = 0 & vercnt = 2 & catid = 1 & impid =-1 & formatcnt = 0 & libid = 27 & typeid =-1 & dateid =-1 & formatid =-1 & source =-1 & 396483 = starts) , but no luck.

  I know that there is now a direct usb support in ESXi 4.1, but my usb device is not supported through this new feature.

  In addition, I'm looking for a PCI Express RS232 serial card that works on this server equipped with passthrough for a XP guest.

  Thank you

  Michael

  Try to ignore this ridiculous list, it's a bad joke for devices on the external bus like SCSI and USB.

  I've successfully used the USB feature in 4.1 for a device not on the list (in fact, he was a device of type modem/serial port), more precisely a key entropy of Simtec.

  So anyway, try your device with the USB function before mingling with the much more fragile PCI passthrough feature.

• Update memory Dell Poweredge R510

  Hello.

  There are two Dell Poweredge R510 servers with the following configuration:

  CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  Additional CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  64 GB of RAM by 2CPU (LV double rank of 8 x 8 GB RDIMMS) 1333 MHz

  We want to upgrade servers with 128 GB of RAM.

  What is the most appropriate way to do it?

  Can I order 8 modules with 16 GB of RAM and replace?

  Thanks in advance for your help.

  Enzorik,

  You can order and use the 16 GB DIMMs in the R510. You can see the directives of the population by proc on page 117 of the guide, located here. Before the memory upgrade, however, you must be certain that you have the server to update BIOS, Drac, lifecycle controllerand Raid Controller. This is to ensure that the server remains stable.

  Let me know if that answers your question.

• Come aumentare the ram in a Dell PowerEdge R510 [CF] Server

  Buon giorno, io avrei need di aumentare del server through ram da 32 gb suddivisi in 8 banchi da 4 GB BT USMA DOUBLE RANK 1,066 con Mhz DIMM a 1.333 Mhz a 64 GB in 8 banchi suddivisi da 8 GB CODICE DELL A6996808 Ovvero PC3 - L10600R DDR3 - 1333 ECC.

  Avevo gia heard Vostra assistenza a qualre mi aveva avvertito di aggiornare November he bios e siccome sul Server e da ESXI 5 mi aveva fatto una download live linux e it bios.ora che pero' ho need di has it lavoro accorgo che mi he bios downloaded by windows, I wanted quindi che tipo di sapere e bios download by e aggiornamento is dopo dovrei fare some settaggio nel bios stesso per vedere rates the RAM.

  speaking Saluti e grazie in pre-empted by it support

  Buon giorno the ho inviato I miei contacts come message Wednesday 02.02.16 is mi potesse cars.

  Speaking Saluti

• PowerEdge R510

  Buongiorno,

  We have a server Dell Poweredge R510 fuori che co no if starts e questi messaggi di error nella Drac presenta e

  The card system CPU1 VTT voltage is outside the permitted range.

  The system voltage CPU VTT PG card is outside the permitted range.
  The CPU1 VCORE PG voltage is outside the permitted range.
  CPU 1 has an event trigger thermal (excessive temperature).

  Abbiamo need di intervento tecnico e detailed by the riparazione

  Buongiorno, the sto contattando privatamente by e-mail.

  Marco

• PowerEdge r510 e1310 fan74 failed or rpm, off range.check fan e e1313 fan fans lost.check redundancy

  Buongiorno just back slab holiday ho gradually he nostro Server poweredge r510 e mi sono venuti fuori questi 2 If sul piccolo show, da explain che fan sulla quale ho error tranquillamente gira, a questo punto ho tried a the fan sulla scambiare porta nella quale mi dava error con una accanto my error viene rilevato sempre su quella porta della mainboard , entering sull' web interfaccia di configurazione del Server noto che quella fan viene segnalata con Velocità uguale has 0 e con error Reed to reach che gira tranquillamente mentre ventole sono senza error ed altre a Velocità normal ovvero 4560 RPM tranne una che viaggia al doppio della Velocità.

  Domanda e ORA: come posso risolvere questo problema? è a modo di risolverlo tramite software bios o o devo send it server per una maintenance?

  avrei urgent need di assistenza in quanto it server deve essere da, l'eventuale telephone number da cars 3425721234

  Grazie in pre-empted speaking saluti

  Buongiorno, is all the ventole girano correctly, provi a clear I connect dalla I drac.

  succesvamente esegua UN reset della stessa to idrac, is no risolve, server it spenga rimuova the side e tenga it looping di accensione be by 20 secondi.

  Ricolleghi it tutto e riaccenda.

  CI sono posisbilita che good it problema rientri.

• PowerEdge R510 recognizes only the 32 GB of RAM (of 64Gb total)

  Hello

  I have a server poweredge R510 1 processor (Intel (r) Xeon E5630 2.53 GHz CPU)

  He used to have 12Gb (3x4Gb) of ram, but I decided to do an upgrade.

  I bought these modules:

  8 x 8 GB PC3L - 10600R DDR3 1333 ECC Reg, is a total of 64 GB

  Unfortunately, the system recognizes that the 32 GB.

  I also tried to use only 4 modules on slots next to the empty space of the cpu, but the system didn't start because he couldn't see any ram installed.

  Can you please help?

  Thank you in advance.

  Completely, absolutely, positively and definitely sure. Dell support was wrong and they should have known better.

  The memory controller is on the processor, not on the system map, so without a processor memory locations cannot be used. The only way to get 64 GB of RAM with a single processor is 4x16GB. There is a lot of documentation.

  Running ESXi, I don't know why you wouldn't have two processors anyway...

• PowerEdge R510 Bios update FAIL

  I have 2 PowerEdge R510 servers that were previously a server with a medical company, but have now been redeployed on my network to other functions.  Both need the BIOS updates.  The problem is, they both are currently at Version 1.1.4.  When I try to run the Windows BIOS update, he reported success and says it needs to restart windows in order to apply the update.  After the reboot, it does not update the bios and recharge just windows as usual.  I also tried to boot from a flash drive and run the update of the executable through BACK.  It does not have pointed out that the BIOS is not a DELL bios, R510 and it reports itself as ' - '.  Of course, it's an original DELL card motherboard/BIOS.  I need to perform this update because I would like to upgrade the processors Xeon 5650 chipset.  Any help would be greatly appreciated.  Thanks in advance!

  If /forceit failed, you can also try/f, or /forcetype.

  Let me know.

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Ventole Rumorose DELL PowerEdge 850

  Buongiorno,

  avrei need di UN preventivo relativamente all'intervento di a vostro tecnico per sostituzione del corpo che sono diventate ventole molto rumorose knew a Dell powerEdge 850 service tag 93F5F2J.

  In attesa di a vostro riscontro Patu speaking saluti

  Marco

  Buongiorno, OTS will in privato a ' manage the request email.

  Grazie

  Marco

• Ordine brain DELL POWEREDGE R720 - disco rotto

  Buonasera,

  I wanted to get one offer by the di UN SAS price disco da 7.2 krpm 1 TB 2.5 "by server of he DELL POWEREDGE R720 nostro.

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it a questo link

  Accessories.euro.Dell.com/.../Category.aspx

  Marco

• Brain price DELL POWEREDGE R720

  Buonasera,

  Vorremmo ricevere quotazione by disco of the di UN SAS 1 TB 7.2krpm formato 2.5 "price.

  He nostro Server e a DELL POWEREDGE R720 (serial number: xxxxxxx).

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it online a questo link:

  Accessories.euro.Dell.com/.../Category.aspx

  Saluti

• Video card HDMI in DELL PowerEdge R320

  Buongiorno,

  Announcement of riguardo chiedo UN UN Dell PowerEdge R320 informazione:

  Ho di installare una scheda video by poter cute need a monitor HDMI quindi con uscita is dedicated.

  Could gentilmente elencarmi quali sono compatibility modelli con questo Server?

  Thank you, Andrea.

  Buongiorno,

  will one OTS ' email by putting our server it service tag del suo.

  Grazie