PowerEdge R510

Similar Questions

• PowerEdge r510 e1310 fan74 failed or rpm, off range.check fan e e1313 fan fans lost.check redundancy

  Buongiorno just back slab holiday ho gradually he nostro Server poweredge r510 e mi sono venuti fuori questi 2 If sul piccolo show, da explain che fan sulla quale ho error tranquillamente gira, a questo punto ho tried a the fan sulla scambiare porta nella quale mi dava error con una accanto my error viene rilevato sempre su quella porta della mainboard , entering sull' web interfaccia di configurazione del Server noto che quella fan viene segnalata con Velocità uguale has 0 e con error Reed to reach che gira tranquillamente mentre ventole sono senza error ed altre a Velocità normal ovvero 4560 RPM tranne una che viaggia al doppio della Velocità.

  Domanda e ORA: come posso risolvere questo problema? è a modo di risolverlo tramite software bios o o devo send it server per una maintenance?

  avrei urgent need di assistenza in quanto it server deve essere da, l'eventuale telephone number da cars 3425721234

  Grazie in pre-empted speaking saluti

  Buongiorno, is all the ventole girano correctly, provi a clear I connect dalla I drac.

  succesvamente esegua UN reset della stessa to idrac, is no risolve, server it spenga rimuova the side e tenga it looping di accensione be by 20 secondi.

  Ricolleghi it tutto e riaccenda.

  CI sono posisbilita che good it problema rientri.

• Dell poweredge R510 128 GB of RAM

  Hello.

  I want to upgrade my Dell PowerEdge R510 with 128 GB of RAM.

  Can I use the 16 GB of RAM x 8 double row? Like this a broken link has been removed from this post by Dell>

  Or I need memory command quad rank for my upgrade? And if so, Dell provides this type of RAM?

  Thanks in advance.

  Enzorik,

  The 16 GB x 8 DIMM you mentioned here

  are indeed certified replacements for the R510. They would be the DIMMs to use.

  I hope this helps.

• Dell PowerEdge R510 memory Conmfiguration

  Greetings,

  I have a Dell PowerEdge R510 with a SINGLE processor that currently has 16 GB of slots of RAM installed A1 - A4 are all filled with 4 GB memory modules. My questions are the following:

  1. Am I able to, another 8 GB or memory?
  2. Is only to have a CPU a problems with filling more memory?

  Think I found my answer here:

  en.Community.Dell.com/.../19645918

• PowerEdge R510 recognizes only the 32 GB of RAM (of 64Gb total)

  Hello

  I have a server poweredge R510 1 processor (Intel (r) Xeon E5630 2.53 GHz CPU)

  He used to have 12Gb (3x4Gb) of ram, but I decided to do an upgrade.

  I bought these modules:

  8 x 8 GB PC3L - 10600R DDR3 1333 ECC Reg, is a total of 64 GB

  Unfortunately, the system recognizes that the 32 GB.

  I also tried to use only 4 modules on slots next to the empty space of the cpu, but the system didn't start because he couldn't see any ram installed.

  Can you please help?

  Thank you in advance.

  Completely, absolutely, positively and definitely sure. Dell support was wrong and they should have known better.

  The memory controller is on the processor, not on the system map, so without a processor memory locations cannot be used. The only way to get 64 GB of RAM with a single processor is 4x16GB. There is a lot of documentation.

  Running ESXi, I don't know why you wouldn't have two processors anyway...

• Usb device ESXi 4.1.0 through material passtrough on Dell Poweredge R510

  Hello.

  I am trying to use one of the four usb ports on a Dell PowerEdge R510 inside an ESXi 4.1.0 260247 host for a XP Prof invited. I have the following PCI devices:

  With each of the devices ID 00:1 a. 0 00: 1 d: 3 comments XP correctly will not start. When I attach the 00:1d.7 device boots comments, but then there is a problem with the device driver. I tried the chipset drivers for W2003 from dell (http://support.euro.dell.com/support/downloads/download.aspx?c=de & cs = debsdt1 & l = a & s = bsd & releaseid = R269378 & SystemID = PWE_R510 & servicetag = & os = WNET & osl = GE & deviceid = 17195 & devlib = 0 & typecnt = 0 & vercnt = 2 & catid = 1 & impid =-1 & formatcnt = 0 & libid = 27 & typeid =-1 & dateid =-1 & formatid =-1 & source =-1 & 396483 = starts) , but no luck.

  I know that there is now a direct usb support in ESXi 4.1, but my usb device is not supported through this new feature.

  In addition, I'm looking for a PCI Express RS232 serial card that works on this server equipped with passthrough for a XP guest.

  Thank you

  Michael

  Try to ignore this ridiculous list, it's a bad joke for devices on the external bus like SCSI and USB.

  I've successfully used the USB feature in 4.1 for a device not on the list (in fact, he was a device of type modem/serial port), more precisely a key entropy of Simtec.

  So anyway, try your device with the USB function before mingling with the much more fragile PCI passthrough feature.

• Update memory Dell Poweredge R510

  Hello.

  There are two Dell Poweredge R510 servers with the following configuration:

  CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  Additional CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  64 GB of RAM by 2CPU (LV double rank of 8 x 8 GB RDIMMS) 1333 MHz

  We want to upgrade servers with 128 GB of RAM.

  What is the most appropriate way to do it?

  Can I order 8 modules with 16 GB of RAM and replace?

  Thanks in advance for your help.

  Enzorik,

  You can order and use the 16 GB DIMMs in the R510. You can see the directives of the population by proc on page 117 of the guide, located here. Before the memory upgrade, however, you must be certain that you have the server to update BIOS, Drac, lifecycle controllerand Raid Controller. This is to ensure that the server remains stable.

  Let me know if that answers your question.

• PowerEdge R510 Bios update FAIL

  I have 2 PowerEdge R510 servers that were previously a server with a medical company, but have now been redeployed on my network to other functions.  Both need the BIOS updates.  The problem is, they both are currently at Version 1.1.4.  When I try to run the Windows BIOS update, he reported success and says it needs to restart windows in order to apply the update.  After the reboot, it does not update the bios and recharge just windows as usual.  I also tried to boot from a flash drive and run the update of the executable through BACK.  It does not have pointed out that the BIOS is not a DELL bios, R510 and it reports itself as ' - '.  Of course, it's an original DELL card motherboard/BIOS.  I need to perform this update because I would like to upgrade the processors Xeon 5650 chipset.  Any help would be greatly appreciated.  Thanks in advance!

  If /forceit failed, you can also try/f, or /forcetype.

  Let me know.

• PowerEdge R510 RAM Upgrade

  Hello
  We have R510 with two processors Xeon and 48GB of RAM. There are 6X8Go modules (3 for each CPU) A1 - A3 and B1 - B3 slots.

  Original modules are P9RN2 DOUBLE IN-LINE MEMORY MODULE, 1333, and 8 GB 2RX4, 8, 240, R, LOW VOLTAGE

  I want to add 16 GB (2x8GB). Our provider offered me modules from Kingston KTD-PE313E / 8G.

  I can put modules there 1.5V?

  See you soon,.

  kejml

  Hello.

  The bars of origin are RDIMMs while those of Kingston KTD-PE313E / 8G show as DIMM Unbuffered (UDIMM). Dell including R510 servers do not support the mixture of double access RDIMMS. I recommend you buy modules of memory similar to the original specifications where 2xGB RDIMMs of low voltage. Here is the Dell SKU # for similar DIMMS: A6996808.

• PowerEdge R510 - expand RAID5 with additional disks

  Hello

  I have an ESX5 VMWare hypervisor running of PE R510 (embedded) on SDs in the mirror.  We currently have SAS 5 x 146 GB drives in a RAID5 configuration that provides approximately 1.6 gross TB of storage for the VMFS data store.

  I'm trying to understand whether it is possible to add additional disks to this configuration RAID5, so expand the virtual disk, without the need to destroy/loose data in place?  If so, what steps would be to do this?

  Thank you

  Chris

  Yes, it's called Online Capacity Expansion.  You can reconfigure your 5 RAID 5 disks to include more records by adding them to the table.  It is non-destructive and can be done online.  You can use the service reconfigures the software OpenManage for do this, either by adding the VIB ESX or boot from a disk Live OMSA.

  Once you have added the records in the table, you need to resize partitions in ESX.  Also, I think that 5 + uses default TPG, but keep in mind that if it is not the case, then your picture will be limited by ESX 2 TB of usable space.  This would likely only (potentially) be a problem if you have gone to some other version 5.x.

• PowerEdge R510 BIOS, 1.9.0

  Hello

  I am trying to install the latest BIOS update on Windows 2008 R2 X 64 but retains fails with "not compatible with your version of Windows" etc.  I tried the normal Download R2 08, the plain 08 X 64 download and or will be installed.

  Y at - it is another version of this update somewhere compatible 64 bit OS?

  Thanks for any help

  Chris

  Correct, iDRAC added platform update functionality.

  Please try these files and I want to know what is the result.

  ftp.dell.com/FOLDER00180061M/1/BIOS_NGVY8_WN32_1.9.0.EXE

  ftp.dell.com/FOLDER00123548M/2/R510_BIOS_NGVY8_WN32_1.9.0.EXE

  Thank you

• Come aumentare the ram in a Dell PowerEdge R510 [CF] Server

  Buon giorno, io avrei need di aumentare del server through ram da 32 gb suddivisi in 8 banchi da 4 GB BT USMA DOUBLE RANK 1,066 con Mhz DIMM a 1.333 Mhz a 64 GB in 8 banchi suddivisi da 8 GB CODICE DELL A6996808 Ovvero PC3 - L10600R DDR3 - 1333 ECC.

  Avevo gia heard Vostra assistenza a qualre mi aveva avvertito di aggiornare November he bios e siccome sul Server e da ESXI 5 mi aveva fatto una download live linux e it bios.ora che pero' ho need di has it lavoro accorgo che mi he bios downloaded by windows, I wanted quindi che tipo di sapere e bios download by e aggiornamento is dopo dovrei fare some settaggio nel bios stesso per vedere rates the RAM.

  speaking Saluti e grazie in pre-empted by it support

  Buon giorno the ho inviato I miei contacts come message Wednesday 02.02.16 is mi potesse cars.

  Speaking Saluti

• Dell PowerEdge R510

  Buongiorno,

  Avrei need di UN intervento da parte di a vostro Técnico by error in foto:

  

  5s a vostro riscontro.

  Good day,

  G.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  Address 2:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge R510 [MS]

  Buongiorno

  Ho 2 brain che questi if are rompendo e devo only. Potete fornirmi preventivo per room.

  Disco No. 1:
  number parte dell: 0V8G9
  Description: HDD, 1 t, NL-6, 7.2 K, 3.5, WD - B, E/C

  Disco n ° 2:
  number parte dell: R749K
  Description: HDD, 450G, SAS6, 15 K, 3.5, S - EG, E/C

  SE posso furnish service tag necessario e nome dell'azienda per cui lavoro.

  Grazie in pre-empted by the risposta.

  Todas

  Andrea

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi it service tag del sistema e I dati per request it?

  By the della spedizione parte o intervento del tecnico on site: 1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  Fabio

• Sostituzione su HDD PowerEdge R510 [MS]

  Buongiorno,

  dovremmo auswechseln UN hdd del nostro server in oggetto.

  Potremmo avere un preventivo del costo?

  Grazie,

  Daniele
  Orisline.com

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi it service tag del sistema e di seguito required information?

  -Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  Speaking saluti