Similar Questions

• Update memory Dell Poweredge R510

  Hello.

  There are two Dell Poweredge R510 servers with the following configuration:

  CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  Additional CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  64 GB of RAM by 2CPU (LV double rank of 8 x 8 GB RDIMMS) 1333 MHz

  We want to upgrade servers with 128 GB of RAM.

  What is the most appropriate way to do it?

  Can I order 8 modules with 16 GB of RAM and replace?

  Thanks in advance for your help.

  Enzorik,

  You can order and use the 16 GB DIMMs in the R510. You can see the directives of the population by proc on page 117 of the guide, located here. Before the memory upgrade, however, you must be certain that you have the server to update BIOS, Drac, lifecycle controllerand Raid Controller. This is to ensure that the server remains stable.

  Let me know if that answers your question.

• Dell PowerEdge R510 memory Conmfiguration

  Greetings,

  I have a Dell PowerEdge R510 with a SINGLE processor that currently has 16 GB of slots of RAM installed A1 - A4 are all filled with 4 GB memory modules. My questions are the following:

  1. Am I able to, another 8 GB or memory?
  2. Is only to have a CPU a problems with filling more memory?

  Think I found my answer here:

  en.Community.Dell.com/.../19645918

• Usb device ESXi 4.1.0 through material passtrough on Dell Poweredge R510

  Hello.

  I am trying to use one of the four usb ports on a Dell PowerEdge R510 inside an ESXi 4.1.0 260247 host for a XP Prof invited. I have the following PCI devices:

  With each of the devices ID 00:1 a. 0 00: 1 d: 3 comments XP correctly will not start. When I attach the 00:1d.7 device boots comments, but then there is a problem with the device driver. I tried the chipset drivers for W2003 from dell (http://support.euro.dell.com/support/downloads/download.aspx?c=de & cs = debsdt1 & l = a & s = bsd & releaseid = R269378 & SystemID = PWE_R510 & servicetag = & os = WNET & osl = GE & deviceid = 17195 & devlib = 0 & typecnt = 0 & vercnt = 2 & catid = 1 & impid =-1 & formatcnt = 0 & libid = 27 & typeid =-1 & dateid =-1 & formatid =-1 & source =-1 & 396483 = starts) , but no luck.

  I know that there is now a direct usb support in ESXi 4.1, but my usb device is not supported through this new feature.

  In addition, I'm looking for a PCI Express RS232 serial card that works on this server equipped with passthrough for a XP guest.

  Thank you

  Michael

  Try to ignore this ridiculous list, it's a bad joke for devices on the external bus like SCSI and USB.

  I've successfully used the USB feature in 4.1 for a device not on the list (in fact, he was a device of type modem/serial port), more precisely a key entropy of Simtec.

  So anyway, try your device with the USB function before mingling with the much more fragile PCI passthrough feature.

• Come aumentare the ram in a Dell PowerEdge R510 [CF] Server

  Buon giorno, io avrei need di aumentare del server through ram da 32 gb suddivisi in 8 banchi da 4 GB BT USMA DOUBLE RANK 1,066 con Mhz DIMM a 1.333 Mhz a 64 GB in 8 banchi suddivisi da 8 GB CODICE DELL A6996808 Ovvero PC3 - L10600R DDR3 - 1333 ECC.

  Avevo gia heard Vostra assistenza a qualre mi aveva avvertito di aggiornare November he bios e siccome sul Server e da ESXI 5 mi aveva fatto una download live linux e it bios.ora che pero' ho need di has it lavoro accorgo che mi he bios downloaded by windows, I wanted quindi che tipo di sapere e bios download by e aggiornamento is dopo dovrei fare some settaggio nel bios stesso per vedere rates the RAM.

  speaking Saluti e grazie in pre-empted by it support

  Buon giorno the ho inviato I miei contacts come message Wednesday 02.02.16 is mi potesse cars.

  Speaking Saluti

• Dell PowerEdge R510

  Buongiorno,

  Avrei need di UN intervento da parte di a vostro Técnico by error in foto:

  

  5s a vostro riscontro.

  Good day,

  G.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  Address 2:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge R510

  Buongiorno,

  We have a server Dell Poweredge R510 fuori che co no if starts e questi messaggi di error nella Drac presenta e

  The card system CPU1 VTT voltage is outside the permitted range.

  The system voltage CPU VTT PG card is outside the permitted range.
  The CPU1 VCORE PG voltage is outside the permitted range.
  CPU 1 has an event trigger thermal (excessive temperature).

  Abbiamo need di intervento tecnico e detailed by the riparazione

  Buongiorno, the sto contattando privatamente by e-mail.

  Marco

• PowerEdge R510 recognizes only the 32 GB of RAM (of 64Gb total)

  Hello

  I have a server poweredge R510 1 processor (Intel (r) Xeon E5630 2.53 GHz CPU)

  He used to have 12Gb (3x4Gb) of ram, but I decided to do an upgrade.

  I bought these modules:

  8 x 8 GB PC3L - 10600R DDR3 1333 ECC Reg, is a total of 64 GB

  Unfortunately, the system recognizes that the 32 GB.

  I also tried to use only 4 modules on slots next to the empty space of the cpu, but the system didn't start because he couldn't see any ram installed.

  Can you please help?

  Thank you in advance.

  Completely, absolutely, positively and definitely sure. Dell support was wrong and they should have known better.

  The memory controller is on the processor, not on the system map, so without a processor memory locations cannot be used. The only way to get 64 GB of RAM with a single processor is 4x16GB. There is a lot of documentation.

  Running ESXi, I don't know why you wouldn't have two processors anyway...

• PowerEdge R510 RAM Upgrade

  Hello
  We have R510 with two processors Xeon and 48GB of RAM. There are 6X8Go modules (3 for each CPU) A1 - A3 and B1 - B3 slots.

  Original modules are P9RN2 DOUBLE IN-LINE MEMORY MODULE, 1333, and 8 GB 2RX4, 8, 240, R, LOW VOLTAGE

  I want to add 16 GB (2x8GB). Our provider offered me modules from Kingston KTD-PE313E / 8G.

  I can put modules there 1.5V?

  See you soon,.

  kejml

  Hello.

  The bars of origin are RDIMMs while those of Kingston KTD-PE313E / 8G show as DIMM Unbuffered (UDIMM). Dell including R510 servers do not support the mixture of double access RDIMMS. I recommend you buy modules of memory similar to the original specifications where 2xGB RDIMMs of low voltage. Here is the Dell SKU # for similar DIMMS: A6996808.

• Dell PowerEdge T110 II add on the video graphics card that works

  The system configuration:
  Dell PowerEdge T110 II
  BIOS 2.8.0
  RAM 2x8GB

  For many reasons (for example feeding bus PCI), it is difficult to install a Dell PowerEdge T110 II graphics card.  The ATI Radeon HD 5450 is a good choice for the Dell PowerEdge T110 II because if its (approximately 10W) low energy consumption.

  After trying several HD 5450 (listed below), a graphics card that works is a "VisionTek Radeon HD 5450 - graphics card - Radeon HD 5450 - 2 GB memory DDR3 - PCI Express 2.1 x 16'.

  Edit: Thanks to paikat for the following references, (see his assignment for the links, where to buy)...
  VisionTek manufacturer: 900356
  Reference Dell: A6173020

  This card works when the monitor is connected to the VGA/D-SUB/DB15 connector. I wasn't looking to connect to HDMI or DVI connectors.

  After you install this graphics card, passed the BIOS Setup:
  Integrated Devices > integrated video controller: enabled

  by saying:
  Integrated Devices > integrated video controller: Standard

  and allowed to move from "Standard" to "Distributed" so it now says:
  Integrated Devices > integrated video controller: distributed

  Note: Install the card with the monitor connected to the integrated video port / edge, change the BIOS to Distributed settings, restart the computer and then connect the monitor to the Discrete / distributed / video port to Add on.

  Here are the identifiers on the "VisionTek Radeon HD 5450 - graphics card - Radeon HD 5450 - 2 GB memory DDR3 - PCI Express 2.1 x 16'

  54502GBPC
  VT 5450 PCIe 2GB V/D/H
  VT-400746PC
  PCB #R81KLD-PJ3Z
  R71KLD
  R81KLD
  Version: 1.0
  G0850000-0351L002739CZA-0087
  SH6 94V-0
  E248779

  Here are some pictures of the 5450 VT from DELL:

  

  

  Other video cards that have been tested and work well in T110 II are:

  * XFX Radeon HD 5450 1 GB GDDR3 VGA/DVI/HDMI Low Profile PCI-Express graphics AMD card HD545XZQH2; HD-545 X-ZQH2
  Note there is another version of this card is ONXFX1PLS2 who has not tested.

  * EX-PX610GT-video JATON GeForce GT 610 2 GB 128 - Bit DDR3 PCI Express 2.0 x 16 HDCP ready low profile ready card video

  * Reference DELL SOUND H545H1G Radeon HD 5450 (Cedar) 1 GB memory DDR3 64 bit PCI Express 2.1 x 16

  I hope this can help others avoid the frustration when you try to install a video card in a Dell PowerEdge T110 II.

  SR2002

  I have read this thread and seen the suggestion of VisionTek, it also works with the card mother E3-1230V2?

  My guess is the Dell PowerEdge T110 II uses the same motherboard for various configurations of CPU, but this is only a guess.

  SR2002

  Also, are there better options eventually with the support of 12 DDR5 and directx?

  None that I know, but I've only tried a few cards. Please let us know if you find cards better than the VisionTek 900356

  SR2002

  I saw a thread suggesting ASUS GTX650-E-2GD5, someone at - he of the inputs on this card?

  I tried a GeForce GT 610 2 GB and it did not work.  Check the use of the GTX650-E-2GD5 (DPT) power and make sure that it is less than 25 watts (see below)

  Quick notes:

  1. the location of PCIe x 16 is actually a "full-size x 8 slot" (also known as an x 16 slot / x 8) and the video card needs to work in this type of accommodation.

  2. video card power (TDP) is a limiting factor. Technical guide Dell says "the system supports a maximum power of 25 W for all four cards PCIe.»  and said Dell owner's manual "ATTENTION: to ensure correct cooling, not more than two cards of four extension may have more than 15 W power consumption (maximum 25 W each), not to mention the integrated storage controller card."

  3 install the card with the monitor connected to the integrated video port / edge, change the built-in BIOS devices > on-board video controller 'Activated' / 'Standard' to 'Distributed', restart the computer and then connect the monitor to the Discrete / distributed / video port to Add on.

• PowerEdge r510 e1310 fan74 failed or rpm, off range.check fan e e1313 fan fans lost.check redundancy

  Buongiorno just back slab holiday ho gradually he nostro Server poweredge r510 e mi sono venuti fuori questi 2 If sul piccolo show, da explain che fan sulla quale ho error tranquillamente gira, a questo punto ho tried a the fan sulla scambiare porta nella quale mi dava error con una accanto my error viene rilevato sempre su quella porta della mainboard , entering sull' web interfaccia di configurazione del Server noto che quella fan viene segnalata con Velocità uguale has 0 e con error Reed to reach che gira tranquillamente mentre ventole sono senza error ed altre a Velocità normal ovvero 4560 RPM tranne una che viaggia al doppio della Velocità.

  Domanda e ORA: come posso risolvere questo problema? è a modo di risolverlo tramite software bios o o devo send it server per una maintenance?

  avrei urgent need di assistenza in quanto it server deve essere da, l'eventuale telephone number da cars 3425721234

  Grazie in pre-empted speaking saluti

  Buongiorno, is all the ventole girano correctly, provi a clear I connect dalla I drac.

  succesvamente esegua UN reset della stessa to idrac, is no risolve, server it spenga rimuova the side e tenga it looping di accensione be by 20 secondi.

  Ricolleghi it tutto e riaccenda.

  CI sono posisbilita che good it problema rientri.

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Windows 7 on the server Dell PowerEdge T620

  Can I install Windows 7 on a Dell PowerEdge T620 server with these specs?

  Card mother TPM

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  Chassis with up to 8, 3.5 "hard drives of type Tower

  1333 MHz RDIMMs 1

  8GB RDIMMS, 1333 MHz, low-voltage, Dual Rank x 4

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  600 GB 3.5 inch 15K rpm, 6 GB/s SAS Hot Plug hard drive

  PERC RAID controller integrated H710, Cache 512 MB of NV, full height

  16 x SATA DVD + /-RW Drive (with RAM) for Ms 2008 R2

  Worst case, you can resell, install a server on it, operating system etc and put it in your living room to show off :)  The case of CaseLabs looks cool, but you'll have to do the same kind of work at home get compatible (and inter compatible) parts for it.

  As I said, there is a good chance that everything will be installed and working fine... just to prepare for the unknown, when venturing off the beaten path.  If you have someone knowledgeable who can at least get you headed down a direction where there is a visibility for success, it would be useful... good luck!

• Dell Poweredge T 310 - memory problems

  Good afternoon.

  I have a Dell PowerEdge T310 running Windows 2008 R2 server.

  It came with sticks of memory without buffer 2 x 2 GB 1333 Mhz. (4 GB Total)

  I've added sticks of memory 2 x 2 GB 1333 Mhz unbuffered and it worked very well send me a 8 GB of total memory.

  Last week I bought an another memory sticks without buffer 2 x 4 G 1333 Mhz, to make it to the 16GB total, using all six (6) available slots on the motherboard Intel XEON based.

  Now, the server does not start and gives me an error of memory on the front screen.

  If I take 2 sticks, using only the new 2 x 4 GB and 2 x 2GB memory stick the server will start without any problems.

  I'm looking for answers 'why' this will not work with 4 x 2 GB and 2 x 4 GB sticks using all 6 (six) places available.

  I am eager as much memory as possible and use all 6 locations.

  I can buy 6 sticks of memory "recorded", but if that no longer works I hesitate to purchase.

  Any help would be greatly appreciated.

  (Navigation on Amazon, I find a kit of registered models they say will work Dual Rank and having the possibility to use all 6 locations):

  24GB (6 x 4 GB) KIT for Dell PowerEdge series M610 (ECC Registered T310 (registered ECC). DIMM DDR3 ECC registered PC3-10600 1333 MHz Dual Rank memory RAM. Real brand A-Tech.

  ReneWold,

  Question you see specific Udimm. Like the T310 only supports up to four access unique. As seen on page 109. If you were to go to access fourth instead, then would you be able to use the 3 DIMMs per channel, allowing you all DIMM 6.

  Let me know if this helps answer your questions.

• Dell PowerEdge T320 - upgrade memory

  Dear all,

  I recently put a server DELL T320 with 64 GB of RAM, I want to add additional memory and would like to know is this server supports 32 GB memory cards. There are now two empty slots in the server and I want to add Two 32 GB cards in them.

  Server model: Dell PowerEdge T320
  Processor: Intel (r) Xeon CPU E5-2407 v2 @ 2.40 GHz
  Board of Directors information: 0MK701, Version A01,.

  Chipset: Intel C602

  Current memory: 16 GB x 4 (64 GB total)

  Product data sheet says that 32 GB is supported. www.Dell.com/.../PD

  Is that no matter what knows the exact part number and make memory which is supported. Please notify.

  Kind regards

  REDA

  Hello.

  Yes, the server supports 32 GB memory modules. However, due to the restrictions imposed by the population memory guidelines requiring that balanced memory channels, will need you 3 modules 32 GB and 16 GB 3 modules such as:

  A1, A2, AND A3: 32GB

  A4, A5 & A6: 16GB

  Here's the 32GB module part number: SKU # A7916527 & Mfg # SNPF1G9D / 32G. Make sure that your BIOS is up to date.