PowerEdge r510 e1310 fan74 failed or rpm, off range.check fan e e1313 fan fans lost.check redundancy

Similar Questions

• PowerEdge R510 Bios update FAIL

  I have 2 PowerEdge R510 servers that were previously a server with a medical company, but have now been redeployed on my network to other functions.  Both need the BIOS updates.  The problem is, they both are currently at Version 1.1.4.  When I try to run the Windows BIOS update, he reported success and says it needs to restart windows in order to apply the update.  After the reboot, it does not update the bios and recharge just windows as usual.  I also tried to boot from a flash drive and run the update of the executable through BACK.  It does not have pointed out that the BIOS is not a DELL bios, R510 and it reports itself as ' - '.  Of course, it's an original DELL card motherboard/BIOS.  I need to perform this update because I would like to upgrade the processors Xeon 5650 chipset.  Any help would be greatly appreciated.  Thanks in advance!

  If /forceit failed, you can also try/f, or /forcetype.

  Let me know.

• PowerEdge R510

  Buongiorno,

  We have a server Dell Poweredge R510 fuori che co no if starts e questi messaggi di error nella Drac presenta e

  The card system CPU1 VTT voltage is outside the permitted range.

  The system voltage CPU VTT PG card is outside the permitted range.
  The CPU1 VCORE PG voltage is outside the permitted range.
  CPU 1 has an event trigger thermal (excessive temperature).

  Abbiamo need di intervento tecnico e detailed by the riparazione

  Buongiorno, the sto contattando privatamente by e-mail.

  Marco

• Dell poweredge R510 128 GB of RAM

  Hello.

  I want to upgrade my Dell PowerEdge R510 with 128 GB of RAM.

  Can I use the 16 GB of RAM x 8 double row? Like this a broken link has been removed from this post by Dell>

  Or I need memory command quad rank for my upgrade? And if so, Dell provides this type of RAM?

  Thanks in advance.

  Enzorik,

  The 16 GB x 8 DIMM you mentioned here

  are indeed certified replacements for the R510. They would be the DIMMs to use.

  I hope this helps.

• Dell PowerEdge R510 memory Conmfiguration

  Greetings,

  I have a Dell PowerEdge R510 with a SINGLE processor that currently has 16 GB of slots of RAM installed A1 - A4 are all filled with 4 GB memory modules. My questions are the following:

  1. Am I able to, another 8 GB or memory?
  2. Is only to have a CPU a problems with filling more memory?

  Think I found my answer here:

  en.Community.Dell.com/.../19645918

• PowerEdge R510 recognizes only the 32 GB of RAM (of 64Gb total)

  Hello

  I have a server poweredge R510 1 processor (Intel (r) Xeon E5630 2.53 GHz CPU)

  He used to have 12Gb (3x4Gb) of ram, but I decided to do an upgrade.

  I bought these modules:

  8 x 8 GB PC3L - 10600R DDR3 1333 ECC Reg, is a total of 64 GB

  Unfortunately, the system recognizes that the 32 GB.

  I also tried to use only 4 modules on slots next to the empty space of the cpu, but the system didn't start because he couldn't see any ram installed.

  Can you please help?

  Thank you in advance.

  Completely, absolutely, positively and definitely sure. Dell support was wrong and they should have known better.

  The memory controller is on the processor, not on the system map, so without a processor memory locations cannot be used. The only way to get 64 GB of RAM with a single processor is 4x16GB. There is a lot of documentation.

  Running ESXi, I don't know why you wouldn't have two processors anyway...

• Usb device ESXi 4.1.0 through material passtrough on Dell Poweredge R510

  Hello.

  I am trying to use one of the four usb ports on a Dell PowerEdge R510 inside an ESXi 4.1.0 260247 host for a XP Prof invited. I have the following PCI devices:

  With each of the devices ID 00:1 a. 0 00: 1 d: 3 comments XP correctly will not start. When I attach the 00:1d.7 device boots comments, but then there is a problem with the device driver. I tried the chipset drivers for W2003 from dell (http://support.euro.dell.com/support/downloads/download.aspx?c=de & cs = debsdt1 & l = a & s = bsd & releaseid = R269378 & SystemID = PWE_R510 & servicetag = & os = WNET & osl = GE & deviceid = 17195 & devlib = 0 & typecnt = 0 & vercnt = 2 & catid = 1 & impid =-1 & formatcnt = 0 & libid = 27 & typeid =-1 & dateid =-1 & formatid =-1 & source =-1 & 396483 = starts) , but no luck.

  I know that there is now a direct usb support in ESXi 4.1, but my usb device is not supported through this new feature.

  In addition, I'm looking for a PCI Express RS232 serial card that works on this server equipped with passthrough for a XP guest.

  Thank you

  Michael

  Try to ignore this ridiculous list, it's a bad joke for devices on the external bus like SCSI and USB.

  I've successfully used the USB feature in 4.1 for a device not on the list (in fact, he was a device of type modem/serial port), more precisely a key entropy of Simtec.

  So anyway, try your device with the USB function before mingling with the much more fragile PCI passthrough feature.

• Update memory Dell Poweredge R510

  Hello.

  There are two Dell Poweredge R510 servers with the following configuration:

  CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  Additional CPU: Intel Xeon X 5675 (3.06 GHz, 6 C, 12 Mb cache)

  64 GB of RAM by 2CPU (LV double rank of 8 x 8 GB RDIMMS) 1333 MHz

  We want to upgrade servers with 128 GB of RAM.

  What is the most appropriate way to do it?

  Can I order 8 modules with 16 GB of RAM and replace?

  Thanks in advance for your help.

  Enzorik,

  You can order and use the 16 GB DIMMs in the R510. You can see the directives of the population by proc on page 117 of the guide, located here. Before the memory upgrade, however, you must be certain that you have the server to update BIOS, Drac, lifecycle controllerand Raid Controller. This is to ensure that the server remains stable.

  Let me know if that answers your question.

• "The Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation"

  Original title: Dell Dock

  Get a message saying: 'the Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation

  Try this for the restoration of the system to Vista before the problem:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.DellDock.com/

  Above is the link for redownload for him, if necessary.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Contact the Dell Support link re problems with their software above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini

• failed to load it please check your page to find javascript errors

  Suddenly, I get this error while trying to open the file.

  Any access is forbidden.

  "failed to load it please check your page to find javascript errors.

  Edge.js has an additional entry for fonts

  In fonts, there is a series of fonts after setting fonts = {};

  Delete it, it should work fine.

  After opening please add these fonts.

• PowerEdge R410 hard drive failed on RAID 5

  Several months ago I had 1 of 4 readers attend a SMART status = bad.  Tried several times to replace the disk with BIOS and Server Manager.  Unable to get the server to replace the disk.  Tried the update of the firmware of the controller, etc. The options that I needed to replace or rebuild all simply were not available.  Note that I have only 4 slots and all 4 slots are used, so I didn't use the fallback option.  So, I had to keep re-import as a foreign player even though the SMART State was bad.  I gave up and thought I'd just wait for the drive to fail.

  Now, the reader has no a flashing yellow.  I plan to replace the drive Friday.  It's a Perc 6 / i controller.  I did several other replacements of RAID driver with no problems.  But there is no Dell/Perc.  Can I simply shoot the wrong drive and connect a new?  Or, should I close the server first?  What is the best way to replace the drive?  I have a backup underway, but would rather not have to use it.  Server is running Windows 2008 Standard 64-bit.

  jonezzzman

  So, I had to keep re-import as a foreign player even though the SMART State was bad.

  You should NEVER do this.  The import is for configurations RAID has failed or off line (2 foreign readers in a RAID 5, for example).  Clear is when the single drive configuration has been marked by the controller as well as foreign, AND the table is running.  Importing a foreign configuration when the table is in place and running are a very quick way to corrupt/destroy the data.

  jonezzzman

  Note that I have only 4 slots and all 4 slots are used, so I didn't use the fallback option.

  Number of slots and "hot spare option" is not bound.

  If your replacement drive appears as foreign, you must first CLEAR the foreign configuration, THEN assigned as a hot spare to start reconstruction.

  Force the drive offline first, then pull it HOT, then insert the replacement after 30 seconds or more.  Never stop a server to replace a hot drive.

• Failing to turn off the Satellite P300

  When I try to turn off my laptop (Satellite P300 with Windows Vista Home Edition), which is to end the session and cut off the power supply, the laptop restarts rather than turns off.

  How can I correct this defect?

  Satellite P300 is not the latest model laptop, and I assume that you have some time?
  Since when you noticed this problem?
  You installed Microsoft updates before it starts to happen?

  Try to define the button / stop like turn off the laptop and test whether the same thing will happen again.

• Failed to get off the screen of language

  I just bought and unpacked my new Apple Watch. I turned it on and I get the screen that allows you to select the language, and also tells you how to return this voice on and outside.  When I push English, the voice said English, but the screen will not erase where it says how to activate the voice and the. When I touch the screen, that I get sometimes cancel with the arrow left or back with a left arrow. That's all I can do I can go no further, as well, so I can't even synchronize my watch. Help, please.

  Hello

  Try to restart your Apple Watch: press and hold the button side until you see the cursor off the power; Drag the slider to turn off; Press and hold down the side button until you see the Apple logo.

  If that still does not help, then try force restart: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

  Then, make sure that you follow all the instructions here:

  Set up your Apple Watch - Apple Support

• PowerEdge R510 BIOS, 1.9.0

  Hello

  I am trying to install the latest BIOS update on Windows 2008 R2 X 64 but retains fails with "not compatible with your version of Windows" etc.  I tried the normal Download R2 08, the plain 08 X 64 download and or will be installed.

  Y at - it is another version of this update somewhere compatible 64 bit OS?

  Thanks for any help

  Chris

  Correct, iDRAC added platform update functionality.

  Please try these files and I want to know what is the result.

  ftp.dell.com/FOLDER00180061M/1/BIOS_NGVY8_WN32_1.9.0.EXE

  ftp.dell.com/FOLDER00123548M/2/R510_BIOS_NGVY8_WN32_1.9.0.EXE

  Thank you