Dell powerEdge t420, server windows 2008 R2, RAID5, partitioning problem

Similar Questions

• Adding appropriate on a PowerEdge R720 Server Windows 2008 R2 Dell drivers

  I'm new on this server model so I apologize if this is a simplistic question. My COMPUTER service gave me 4 servers Dell PowerEdge R720 with no OS on them and no other information or documentation. I was able to get the Windows 2008 R2 OS installed base, but fight with the addition of the drivers necessary Dell or components. Is there an easy way to detect what I have and automatically install what I need?

  You could run SUU from the operating system:
  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=9CXFR&FILEID=3421957643&osCode=WS8R2&ProductCode=PowerEdge-R720&LanguageCode=en&CategoryID=SM

  It's huge (+ 10 GB), then it may not be the best way. You can download and install the drivers one at a time. Start with the chipset driver, then install the drivers for the device with the yellow exclamation marks in Device Manager, have installed drivers 'generic' and all available drivers that are newer to the native Windows drivers - you will need probably the video drivers and the network may be drivers. You must also install OpenManage Server Administrator (Managed Node).

• Buy a windows server license R2 ROK 2012 for a Dell PowerEdge 2950 bought in 2008 [MS]

  Hello

  I have a Dell PowerEdge 2950 with windows server 2008, I bought it in 2008.

  I want to upgrade to the new windows server R2 Foundation, purchasing a license ROK 2012.

  Is this possible? Where can I buy one of these?

  Thank you

  OTO Tortorella
  TeleType.it
  
  

  Buongiorno,

  He endured of Poweredge 2950 come sistemi al massimo do it 2008 server (even he 2008 r2).

  Speaking saluti

  Manual

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Step to convert the current Dell PowerEdge 1800 server in Esxi 4

  We have production server, which is Dell PowerEdge 1800 with Windows SBS 2003 with 3 hard drives in RAID. And then, we want to make this server as VMware Esxi 4 with the same Windows 2003 SBS server. We will replace the 3 new hard disks, but new readers are not the same as the old disks. What is the right next step? Because it comes to the production server, we cannot lose all data.

  1. use VMWare vCenter Converter to convert the current Windows 2003 SBS to VMWare workstation

  2. Replace with 3 new hard drives and install VMWare EsXi 4 CD

  3 use VMWare vCenter Converter to load WMWare workstation image into the new server Esxi 4.

  Please let me know if this is the correct order? Is there a risk? Thank you!

  Welcome to the community - that sounds about the right order =

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Hi George,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope that helps!

• Taking more time than expected to disconnect from a Server Windows 2008 R2 SP1

  Taking more time than expected to disconnect from a Server Windows 2008 R2 SP1

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Virtualizar Server Windows 2008 64-bit

  Hola a todos los del grupo readers.

  Esoy sober trabajando a server Dell PoweEdge R410 con 24 G of RAM there back microprocesadores Intel Xeon E5507 of 2.27 GHZ.

  Intento instalar una Máquina virtual windows 2008 64-bit sober vmware esxi 4.1.0.

  He configurado the Máquina virtual por defecto en lista of configs Cavalry ESXi (windows 2008 64 bit) al arrancar led the Máquina virtual recibo una ventana advertencia acuerdo al archivo as editor mas abajo.

  He read some items al respecto, e intentado reconfigurar el Bios of the machine in virtual los datos that case en the advertencia, pero no encuntro estas options.

  Not if are yo no black find los datos a configurar Bios, o los microprosesadores este Server realmente en el no compatible son para virtualizar una Máquina 64-bit.

  Desde is muchas gracias

  Bernardo

  Hola bskatz,

  Checks en you HOST PHYSICAL than you have enable Intel-VT o AMD - V

  A greeting.

  -

• Server Windows 2008 R2 Standard - TrustedInstaller owner of C:\ Drive - unable to set new owner

  I have a new Windows 2008 R2 Standard Server.  The original question started with W32Time won't start do not, but I think that it comes to this issue.  When I look at the 'owner' of the C:\ drive it shows "TrustedInstaller" as long as the current owner.  When I try to replace the owner of the server administrator account, I get this error:

  Unable to set new owner the disk Local (c).  Access is denied.

  Any ideas?

  Hello, Chris Prerno,.

  Microsoft Answers is for consumer issues on Windows XP, Windows Vista, Windows 7 and Windows 8 Preview Release. As you question deals with Windows Server 2008, there is a specific forum for this OS on TechNet.

  Please click on the link below and repost your question.
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  Thank you

• problem with making a stand-alone server windows 2008, I do not really understand the versions of the internet protocol

  I do a stand-alone server for windows 2008 and my question, what's the difference between an internet protocol version 6 (TCP/IPv6) and internet protocol version 4 (TCP/IPv4), thank you welcomes Dylan

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• Windows 2008 R2 DataCenter registry problem

  Hi all:

  A few months ago, I needed to make a full upward from my server and after that almost all still works fine besides that some functions including IE.

  The question I had is with 298 ordinal which is not found in the library iertudil.dll dynamics.

  I can confirm that the iertudil.dll file exists under System32 and tried to replace it with the original installation of the DVD where it was damaged but not yet lucky. I know that I have no malware or viruses that I ran full scans and this issue has happened after the back upward.

  So at this point, I'm sure that the problem is related with the registry key bad that was left when I did the back upward by up to 100%. I would like to make a correction of the registry software and I actually found a good which is accredited by Microsoft, but the problem is I managed to install the correction of the registry software, but if I try to run it, it won't work and it appears that the message '298 ordinal. "that cannot be found in the dynamic link library iertudil.dll

  I'm a bit on a dead end here because I can't run the program to try to repair the registry and looks like the only option is to go into the registry and try to fix it manually. Only problem is that I don't know where to find them and what would be the key to get rid of all bad registry entries.

  Given that I'm avoiding at all costs a repair of windows or pure full install as that would make me a lot of time down on my server, I want to ask if there is no genius out there who could point me where to find this iertudil on the register and the values should be there so I can modify it. Of course, I'll do a registry backup before committing any changes. If anyone can help, I'd appreciate that after googling for hours I can't find all the instructions for a manual registry fix. I'm on a Windows 2008 R2 DataCenter X 64 bit system

  Thanks in advance.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Updated PE T420 Server Standard 2008 to 2008 R2

  To run Office 2013, we update our Server 2008 standard 2008 R2, but when he runs his verification of compatibility it reports that Dell PERC S110 pilots must be updated. I checked and the latest drivers (V3.0.0.0134) are already installed - any advice on how to proceed?

  Hello

  The S series is the driver-based controllers. They do not work with generic drivers and Windows has probably not updated the driver in its driver database. I show that you have the latest version of the driver. I would ignore the message and move on. This driver is validated to 2008R2.

  Thank you

• Install a non-of a Dell Poweredge 2850 server operating system

  Hello everyone.

  I was wondering how I could go about the installation of operating system, including Windows 7 and Windows XP on my server. I understand that they are not made for the server, but I would use Windows 7 instead of the server operating system. Windows XP is an option, but I'd rather not, if I have to

  Stick the DVD in the drive and start to install.  Chances are that Windows 7, like server 2008R2 will NOT have the drivers for the controller RAID (PERC 4e/Di), so use the driver 2008R2 for the RAID controller (and any other device requiring disks after installation).

  Controller RAID PERC 4e/Di to 2008R2 driver:
  http://ftp.Dell.com/SCSI-RAID/LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe

  Also keep in mind that PERC does NOT support non-RAID, so you MUST configure RAID before installing, or even with the right driver, no hard drive is visible.

  Potential problems:

  Graphics - you should probably use the drivers of graphics/video 2008 x 64 for a decent resolution.  Keep in mind that server (such as 16 MB video memory) graphics will run NO Aero or high resolution/refresh.

  DRAC - if you have a DRAC (Dell Remote Access Controller) card installed, you will not be able to install drivers to meet these devices in Device Manager.

  Management system - software of management of Dell is NOT supported on the client OS.

  Other:

  In the 2850 processors do NOT support the VT, then you would be very limited with virtualization options.

  Sounds: there is no sound on a server.