Dell PowerEdge T430 using 1 PCIe slot for a PCIe of Sound Blaster card

Similar Questions

• Is there anyway that I can use the MP3 files for the computer system sounds in windows 7

  Is there anyway that I can use the MP3 files for the computer system sounds in windows 7. Any help would be appreciated, thanks - Joe

  I don't think so. If you convert the .wav files, you could. Google for an MP3 to WAV converter.
   
   

• In train to build a pacemaker triggered two pulses (in burst), using the PCI-6251 M-Series card.

  
  
  

• Path of VMdirect and Dell Poweredge T110 II

  No matter who got the e/s working on the Dell Poweredge T110 II DirectPath?  On the Summary tab, I have a warning indicating that the host hardware does not support the DirectPath of IO.  I have virtualization enabled in BIOS.  On the configuration tab I also have the error "Host does not support configuring passthrough" my processor is a intel Core I3-3220 3.3 Ghz.   If someone got it works with the latest BIOS?  I have to use USB external drives for storage of files and not facing one of the internal locations and just use the internal slots for my build of ESXI raids.  Any help in this would be appreciated.

  Thank you

  Stephen Bailey

  I discovered that my CPU does not support directpath i/o, so there is no hope in getting this work.  I found a work-around however to get a crossed USB device.

  While VMdirectpath i/o would be nice there is also a USB device transfer which is another way to allow direct communication with a hardware device to a guest operating system.  ESXI allows transfer USB Device (this can be done without vmdirect path).

  When I first tried this (I didn't know at the time that ESXI 5.0 did not support USB 3.0) device usb 3.0 had not passed through and I thought it was because of a misconfiguration of the vmdirect path.  I did some additional research after I discovered that my processor didn't support directpath and found documentation for transfer of USB device.  All I had to do was add the USB controller to my guest operating system configuration then added a "usb device" to the configuration of my guest operating system who found the name of the device is connected.  I was then able to add a USB 2.0 device and my guest what OS is very clear.

• ESXi 4.0 and DELL PowerEdge T100

  Hi all

  I have a question to any user of the T100 Server (or anyone abe to solve my problem). I want to buy a DELL (round) Server compatible with ESXi 4.0. But I have a problem with the compatibility logging, I found a document from DELL:

  http://support.Dell.com/support/eDOCS/software/eslvmwre/vs/AdditionalDocs/compatbltymatrx/compmat.PDF

  Who informs on the compatibility of the T100 with ESXi 4.0 server. On the other hand on the compatibility list VMware it is said T100 is compatible with ESXi 4.0 but with Intel Xeon 33xx series. I have not found an exact match as Intel Xeon 3300. But in the configuration of the server, I found a processor like the Quad Core Intel® Xeon® X 3330; 2.66 GHz, 2x3M Cache, 1333 MHz FSB, 95W TDP.

  And my question is this compatible with ESXi 4.0 Server and CPU? Anyone tried this configuration or knows answer this question with certainty? It would be very helpful because if I buy T100 which won't be compatible with ESXi 4.0 it will be useless. Please do not suggest other DELL PowerEdge servers - I have no money for them.

  Thanks in advance.

  The selected processor would be correct. I don't know if controller SAS 6iR has of a cache battery module, but it is worth for the performance of the disk.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• DELL PowerEdge R710 and PERC H700 RAID driver for WIn 2008 Std

  Hi all

  I have a DELL PowerEdge R710 with a controller RAID PERC H700.

  I try to install Windows 2008 Std 64 bit, but I can't find the driver. Even for the site web at support.dell.com. Can someone help me.

  THX in advance

  Even if you use a driver of 2008, it should at least recognize it, then you must be using the wrong driver or something wrong :)

  If you are installing 2008 R2, make sure that you use this file:

  If you install 2008 x 64, make sure that you use this file:

  With one, you must first unlock the .exe (right click on the .exe, properties, unlock), unzip / extract the files (run it and make a note of the default location), and then copy the 4 files on a CD, USB, etc., then when Windows tells you that he is not all hard disks, click on the link drivers load below to load the drivers from the media you have chosen.

• 2 slots for ram, or I can use only a single slot?

  Hello..

  IV ' e bought 8 GB of ram for my MBP 2012 has 4 GB of memory.

  But I totally forgot that she has 2 slots for ram!

  so you can use only a single slot? or I have to buy another ram?

  Thankss

  For best performance Mac need pairs of corresponding RAM modules, swap or buy more is recommended all things being equal. I would however expect sentencing of incompatibility performance much smaller than the benefit of the upgrade beyond 4 GB, so you could run with 8 GB in a slot and the original 2 GB in one for 10 GB total installed.

• Can I still use my PCI-4351 for readings of tc type t, even if the unit is out of tolerance in the +/-2 .5V range?

  Hello

  I use a PCI-4351 for readings of TC type T, and after receiving it back from calibration, the 2.5V range came out by - 0.00003 V.  The rest of the calibration is within the tolerance.  Please tell us if the 2.5V range is used for playback of the thermocouple type T with the accessory CB - 68 t.  From my understanding, I don't think that the 0.625V beach is used for measurements of TC, and they all calibration.

  Thank you for your help.

  Michael Carter

  Hi Michael,

  You're right that you'll only need the gamme.625 for this measure.

  I am very disappointed to hear that your device was not properly calibrated.  It was our calibration?  If it were, I can try to you allow to send to us or something like that to remedy this situation.

  If there is anything else I can do to help correct this problem please let me know.

• If my motherboard has a PCI slot for a graphics card, can I add a slot to it?

  I was exchanged under warranty a Compaq Presario with a card mother H-apricot-RS780L-Μatx (apricot).  It has integrated graphics card ATI Radeon HD 3000 and no PCI slot to upgrade.  I can add a slot it or am I stuck with it?

  Hello

  Sorry to say, but you cannot add a PCI Express x 16 slot for the motherboard.

  Kind regards

  DP - K

• Find out how to type a letter for printing on my Dell Dimension E310 using Windows XP Home Edition

  Hi, I want to know how to start from home screen to type a letter for printing on my Dell Dimension E310 using Windows XP Home Edition... Thank you

  On Saturday, February 5, 2011 14:25:06 + 0000, Clinton Jones 1 wrote:

  Hi, I want to know how to start from home screen to type a letter for printing on my Dell Dimension E310 using Windows XP Home Edition... Thank you

  You type a letter in a word processing program (Microsoft Word, Corel
  WordPerfect, OpenOffice, etc.). Do you have a word processing program
  installed?

  If you have not installed Word processing program, you can use
  WordPad, which ships with Windows. But note that WordPad is a very
  primitive processing program (really more a glorified text)
  Editor in Chief) and gives you much less control over the formatting to a real
  processing.

  Ken Blake (MS-MVP)

• power supply for Dell PowerEdge SC1430

  How can I order a power supply for Dell PowerEdge SC1430?

  Maintain the NOTE from the ADMINlabel: maintain the label removed by privacy policy >

  Call Dell Firewall 1-800-357-3355 parts and ask for prices and availability of the Dell Reference number. Or simply search the Web for the part number.

  MK463 Delta power 750w
  U9692 Hipro power supply 750w

• DELL PowerEdge T710 support for 2012 Windows

  Hello

  I was reading this document on the support Windows 2012:

  http://en.community.Dell.com/TechCenter/OS-applications/w/wiki/4149.Dell-PowerEdge-server-support-for-Windows-Server-2012-and-its-features.aspx

  If I understand correctly T710 is supported for the installation of Windows 2012 as:

  Support Dell - qualified.

  And 'X' means that the long-term 2012 Windows: error memory consumed, Collaborative processor performance counters, logic processor idling, compatible device name are not supported on this server. Only SR-IOV future is supported?

  Thank you

  That is right.  Consumed memory error, the processor performance counters Collaborative, idling logical processor and compatible device Naming are only available on generation servers 12.   Server 2012 will take place on the T710.

  Kind regards