Dell U2715H monitor does not

Similar Questions

• Dell U2913WM monitor does not detect the cable to the DisplayPort input

  Hello world

  I just got my new U2913WM yesterday. It works fine other then he said no display port cable when on the display port entry. The monitor works fine with a cable DVI and my PC, but I get no cable error if I try to use a cable of DP with ether a PC or a Mac. I would get one to make them work with the cable of DP that my Mac will not pick up the correct screen resolution when you use HDMI.

  • I have 2 computers, 1 PC and 1 Mac.
  • My PC has 2 ports of DP and my Mac has 1
  • I tried the cable in all DP 3 ports with the same results
  • I went out and bought a new cable of DP and still had the same problem.
  • I tried to turn off the PC, Mac and the monitor and back on their return
  • I also tried turning and turn off the DP 1.2 setting in the monitors OSD
  Can anyone think of anything anyone else I can try? I'm kind of at a loss at the moment other then contact technical support.

  I know that this is a very old post, but I just stumbled on it all trying to solve the same problem. In the case where treated him as stupid as I was, there are TWO display on the Dell U2913WM Ports, in a (#4) and exit (n ° 8). Next to the HDMI is only, you want to plug it into one near the power cable. I realized this after 2 hours of tearing my hair. Hope this helps someone, if it isn't the op.

  

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• Dell monitor does not stay on

  * original title - my monitor does not work *.

  OK so I bought this computer about 4 years ago and it worked just fine until when I tried to turn it on this morning it does not turn on. Then I tried again and it was the case, then half an hour later he died. After that, I tried to put it on the back again but this time, when I press the button it lights but when I let go of it, it turns off the coast. I tried unpluging but it does the same thing.

  My Dell flat screen monitor

  The computer does not work

  Also I umpluged computer from the monitor and the same thing happened

  Help, please

  Hi Uther 9,.

  If the monitor does not remain during the self test, it is defective.

  * Turn off the monitor
  * Remove all cables from the computer monitor
  * Turn on the monitor
  * The floating red/green/blue/white dialog box should appear on-screen on a black background and stay on

  However, it seems that you already have, is most likely a hardware problem:

  http://support.Dell.com/

  Thanks and good luck!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Monitor does not work after installing Windows 7.

  I have a Dell laptop with a Dell S1709W Flat Panel screen.  After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work.  The monitor said that he does not any signal from the computer.  The computer does not show that it has detected the monitor.  The monitor's cable and the connections are good.  What should I do to get the monitor to work?

  You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.

  If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC health check-up according to my monitor does not have the minimum required display settings and change the DPI by default survey

  Original title: DPIdefsault level

  I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level.  How do I do that?

  What version of Windows?  You can change the DPI on Windows XP but right click on your desktop, choose Properties, selecting the tab settings, clicking on advanced and change the dropdown to DPI.  Other versions of Windows have similar steps.

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• my monitor does not automatically open on a startup computer or after sleep.

  MY MONITOR DOES NOT OPEN AUTOMATICALLY ON A BOOT UP OR AFTER SLEEP.  I HAVE TO CLOSE THE MARKET TO DO WORK. HE DID THIS FOR A FEW WEEKS.  THIS IS AN OLD 20 "AL2017 MONITOR.  JAKE

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• Powers of laptop on but the screen (monitor) does not work.

  I have a HP compaq laptop 6720 (vista home basic, 1 GB of ram, intelcore,...)

  Powers of laptop on and all lights are working, but monitor does not work.
  Nothing on the screen, looks like no electricity on the screen or any contact of motherboard.
  Need your help,

  Kind regards.

  Hello

  If you don't see anything on the screen when you start, and this includes see the HP Logo, it would seem that it's a hardware problem.

  Contact HP Service or a good repair shop.

  See you soon.

• WUSB54GC - WLAN monitor does not not on Windows 2000 SP4 computer laptop

  I have a WUSB54GC v3 and I tried to install the drivers and the WIFI monitor on a Gateway Solo 5300 laptop running Windows 2000 SP4.  When I put the disc, the installation automatically started, but stopped after a few seconds with a pop message saying, "this version of windows is not supported" (or something similar to that).  I read in this forum and learned how to manually install the driver from the disk I did.  I checked the device using troubleshooting in Device Manager and shows the driver to be installed correctly and the device works correctly.

  My big problem is that the monitor WLAN (the little green square in the bottom right of the screen) will not illuminate.  There are no available wireless networks and the monitor does not respond to the "Refresh" or anything else.  It seems to be "dead".  How can I get the monitor to work?

  Thank you!

  Mike

  WUSB54GC is not compatible with Window2000... So either you can upgrade your operating system to Windows XP, or you can go for different cards as WUSB54G.