Dell Ultrasharp U2412M

Similar Questions

• Dell UltraSharp U2515H Monitor

  I'm curious if my 27 inch iMac 2011 mid will be able to run both 2 Dell Ultrasharp U2515H monitors http://www.amazon.com/Dell-UltraSharp-U2515H-25-Inch-LED-Lit/dp/B00SPWPF1O?ie=UT F8 & PSC = 1 & redirect = true & ref_ = ox_sc_act_ti...).  In general, I need to watch sports events simultaneously on two different monitors, and I wonder if my iMac both these 25 inch monitors can handle at the same time.  Any help would be appreciated.

  Your iMac can support 2 screens Thunderbolt of Garland. This Dell monitor supports the DP 1.2 STD for daisy chaining two monitors.

  After reading using screens 4 K and Ultra HD TVs with your Mac - Apple supported it does not resemble your iMac would support 2 of these monitors. But I could be misinterpreted.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• New Dell Ultrasharp U2417H old Inspiron 580 MT desktop computer monitor

  My new monitor has arrived today, but I can't connect it with the included cables. My old Inspiron 580 was purchased in 2010 and my old monitor used the plug VGA.

  The cables provided with the new monitor are the upstream USB 3.0 cable and a DP for CDM cable. It doesn't seem to be a taking of CDM on my desk then, how can I connect the monitor?

  My first question to the seller Dell was "this new monitor would be compatible with my old desktop Inspiron 580, that is, about connectivity?"  He said yes, he would.

  Any help would be much appreciated - but not too technical if you please.

  Thank you

  Dell Inspiron 580MT: Intel core i3 530 Processor

  Graphics card: 1 GB ATI Radeon HD5450

  PETER2305

  The ATI Radeon HD5450 1 GB of graphics card, show it as having a HDMI connector, as the Dell UltraSharp 24 InfinityEdge U2417H monitor, you can use an HDMI cable similar to this:

  https://www.Amazon.com/AmazonBasics-high-speed-HDMI-cable-standard/DP/B014I8SSD0/ref=sr_1_1?ie=UTF8&QID=1466012307&SR=8-1&keywords=high+quality+HDMI+cables

  ATI Radeon HD5450 1 GB graphics card:

  http://www.Newegg.com/product/product.aspx?item=N82E16814102882

  Data sheet... Monitor Dell UltraSharp 24 InfinityEdge U2417H:

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&l=en&s=DHS&CS=hkdhs1&SKU=391-bcpx

  For more information you can also, this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• Dell UltraSharp U2415 & Mac Mini (model end of 2014)

  I just bought a Dell UltraSharp U2415 monitor and a Mac Mini (end of 2014 model) and am looking for help on how to connect them to benefit fully from the 16:10 report. As I understand it, if I'm going to hdmi to hdmi I get 16:9-1080 p.

  I opted for 16:10 model so I can get a little more vertical screen space. Thank you for any assistance that you can pass along.

  Unfortunately, Dell does not validate the test / this model of monitor on Apple, ports and software hardware. For this reason, Dell has no troubleshooting steps a lot to offer. You can post on the Forum of Discussions Apple and see what they say. But the resolution and appearance are both depending on the video source. In theory, you should use the CDM to crush on the Mac Mini.

  Mac Mini Tb/CDM on--> U2415 mDP to DP--> DP U2415 cable in

• How to connect two Dell UltraSharp U2414H 24 inch screen LED monitors daisy chain?

  I just bought two Dell UltraSharp U2414H 24 inch screen LED monitors, but it is unclear how two monitors must be linked together. Cable does not seem to be provided? Can anyone help?

  You have the L412Z XPS 14Z. It has the following video ports back =.
  CDM (Mini DisplayPort)
  HDMI

  XPS 14Z L412Z CDM on--> Dell mDP to DP cable--> #1 U2414H DP in
  XPS 14Z L412Z out HDMI--> HDMI to HDMI Cable--> HDMI U2414H #2 in

• DELL UltraSharp U2515H Monitor - fixed the power LED mode indicator sleep?

  Hello

  I just bought a monitor DELL UltraSharp U2515H 25 and in the course of the day before (Mini DisplayPort) Power LED flashes during the standby time.

  Can you tell me if this is normal?

  This indicator returns to fixed when using the display and it is possible to turn off the light while turning on the unit via the OSD menu. (Page 41 of the french DELL user guide)

  The link provided above a video illustrating the behavior of the screen (IMG_7073.MOV)

  Manufacturing date: Apr. 2015
  Review: REV A01

  Thank you in advance for your support.

  Kind regards

  Stone

  It is normal to blink while it is in standby mode. White light indicates the monitor is on and fully functional. A glowing white light indicates the power saving mode. Did you put the Power button LED "off during active?

• Billboards WILL vs IPS: Dell UltraSharp U2410, Dell USU2711

  
  Or - what should I look for in a display to reach the full potential of my graphics card?

  I doubt that I will get a monitor and have the intention to buy a screen for my new build which is currently being assembled, which I built here on this forum with the help of you all and thank you 1 million for that :)

  
  So now I am considering both Dell and Dell UltraSharp U2410 UltraSharp U2711 screens because that's what offer various stores here of people making the video and graphics work. (It's a trendy oriented really place).

  I do NOT see another competitor to these two options because of such trendyness mentioned, but also because of their ergonomic characteristics; the stand in both cases has a vertical adjustment to change the height of the screen on your desktop, more they both can be hung on the wall.

  
  Another important feature is the guarantee, which is provided by the shop authorized Dell here in Israel ("Yael Pitronot"), which is very good, I know from my own (horrible) experience with my Dell laptop. Bought last fall, it was all parts replaced by this shop very fast and accurate (unlike the Dell international warranty service provider).

  So, in fact, from my point of view it's a reason to NOT buy anything Dell.

  
  In addition, these two screens have 6ms response time and my question, which is too slow for the first edition?

  
  

  And, should I be looking for a screen GOING coffered which has MS2 (respponse to 2 milliseconds time)?

  
  Finally, I'll give some info about my system: I'll have a pretty good graphics card (or so I'm told,) - Gainward GTX580 Phantom 3 GB with 3072 MB/384bits high-speed GDDR5 memory, but I don't know what should I look for in a display in order to take into account, or do it be compatible with my video card features.

  Internal monitor Dell U2410 has 12-bit of a procedure, don't know what that means relative to the graphics/video card.

  
  Finally, I'm going to use this machine to make the video and Flash video that I use in my Flash interactive applications (including animation), for which I also use Photoshopped stills, while I use Illustrator to make large posters (pretty frustrating on my laptop) and you want to use Indesign. In short, this computer is for the Classic Collection CS5.5.

  Any comments would be great.
  Thank you.

  Thank you.

  The response time is a consequence of the architecture of the IPS and have to worry at all. The Dell Ultrasharp line is very good and has a nice performance ratio / $. There may be alternatives, such as the Asus Pro range, but your argument about locally available for the Dell printer service makes me say: look no further.

• Dell UltraSharp U2711 monitor for video workstation?

  Thinking of ordering UltraSharp U2711 monitor of the Dell for my CS5 video workstation.

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 224-8284 & Baynote _bnrank = 0 & baynote_irrank = 3 & ~ ck = dellSearch

  Someone has an experience pro or against with this monitor?

  I noticed the damage monitor suggestions in another recent post...

  Thank you!

  Mike

  Mike,

  It is a large monitor of the plug. I have no personal experience with him, but it looks great. I would not hesitate to buy it if I had the budget and the need for a monitor like that.

• Mid-2007 Mac Mini Dell UltraSharp U3415W?

  I have an old Mac Mini that I was unable to connect to my new monitor.   I am able to display the mini to my TV (using the old VGA adapter supplied in the box with the Mini connected to a VGA input on the television).  I also tested the Mini on a VGA monitor (at the Apple store genius bar) and it worked.

  However, it doesn't give me video when I connect it to my Dell monitor with a mini Display Port DVI cable.  See below for the plug.  What is the cable?  The Mini?  Ideas?

  Display Port DVI cable: http://www.amazon.com/gp/product/B00DJCB83O?psc=1&redirect=true&ref_=oh_aui_sear ch_detailpage (seems to be DVI - D)

  Reference Dell monitor connectivity Specs:

  1 HDMI connector (vr2.0)

  1 connector MHL

  1 mini DisplayPort

  1 DisplayPort (version 1.2)

  1 DisplayPort of the Rockies (MST)

  1 audio Line out5

  4 ports USB 3.0 - downstream (4 back)

  2 ports USB 3.0 - upstream

  Mini Video/Display features:

  Graphics card: Intel GMA 950 VRAM Type: integrated

  Standard VRAM: 64 MB of VRAM maximum: 64 MB

  Display stand: Simple Support for screen resolution: 1920 x 1200

  Details: The video output DVI compatible digital resolutions up to 1920 x 1200. Apple also reports that it supports the "Apple Cinema display 20-inch and 23-inch Apple Cinema HD display; support coherent digital displays up to 154 MHz; non-coherente digital media displays up to 135 MHz."VGA output (using the supplied adapter) supports analog resolutions up to 1920 x 1080. Composite video and S-Video (to connect to a projector or TV) requires the Apple DVI adapter (sold separately) video.

  Is your adoptive parent for DP > DVI, DVI not > DP.

  The cable is not bidirectional.

  You need a converter as

  o http://www.StarTech.com/AV/Converters/Video/DVI-to-DisplayPort-adapter-with-Audi ~ DVI2DPA

  not cheap

• XPS8910 with Dell UltraSharp 24 monitor - configuration double monitor U2414H

  I just got my XPS8910 and can not know how to set up two monitors, the only cable I need to connect the computer to a monitor's HDMI with adapter supplied with the computer. When I use the cable supplied with the monitor daisy chain monitors I get the message that there is no signal coming to the second monitor. I have allowed DisplayPort1.2. It's frustrating? I need additional cables, or is it a specific port option? Any help is appreciated.

  RL

  Hi rozmerlin,

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/

• Unpredictable behavior with Dell Ultrasharp U2415 two monitors

  Since I created my two Dell U2415 monitor, I had sporadic problems with one or two of them are not recognized. I have a system Windows 10 T1700 Dell Precision with two monitors. This is the first time I've ever owned monitors that use Mini DisplayPort technology. The problems are:

  1. I would like to turn the monitor OFF the end of the day, because I don't like the brightness of the light emitted by the power buttons when not in service.  But it seems that turn off the monitors always brings problems when I return to the computer the next day. For example, if I turn off the monitors, the next time I turn everything back on, 1 single monitor is recognized. Sometimes, it's the one on the right, and sometimes it's the only one on the left. The other monitor has power, but no entry is recognized and it just says: "Entering Standby Mode" or something like that, and there is no display.  When this happens, there is no 2nd monitor when I go into the control panel display settings. It's as if the monitor is not plugged. I have to restart my PC again (this time, ensuring that both screens are turned on at the time where it restarts), who sometimes feel to come back on two monitors.

  2. on Monday, I'm alerted me to an update of the software Dell Display Manager, so I installed the update. At the end of the day, I've upgraded my PC sleep (leaving turned on monitor). When I came back in the morning, the PC wake acknowledging only 1 monitor. I had to go to the display settings for Windows 10 and extend to the 2nd monitor (why I am able to do it again)?

  Why are these things so delicate?  Is there a specific order in which everything must be turned off and turn it back on so that both monitors will be recognized correctly? Should I wait until my PC is off to turn off the monitors? I turn on the PC BEFORE monitors (or vice versa)? I have to turn on the primary monitor BEFORE the secondary monitor (or vice versa)? There seems to be some magic to all this and I would like to understand exactly what is happening. I want to be able to turn off monitors whenever I like and feel confident that the two be recognized when I've turn them back on. At this point, I'm leaving the power to monitor all the time because of the many problems I had and because I simply do not trust them.

  Thank you

  For the computer to identify a DP/CDM monitors, the monitors must be first, and then the computer graphic card reaches out to monitor DP/CDM opening handshake. Any changes to this order will disrupt the handshake. A computer hibernate or sleep modes tend to confuse the DP/CDM handshake. So I don't use them at all.

• UltraSharp U2412M monitor

  I bought a u2412m monitor and I just watched a video on this subject, he said that the monitors are calibrated until they are shipped. Is this correct?

  Hi tonytm,

  Yes, the monitors are calibrated until they are shipped. May I know is there any problem with the monitor?

  Waiting for your answer!

• Dell Ultrasharp U2413, adobe and sRGB coverage with geforce classic

  Hello

  This monitor has a 99% adobe rgb and 100% Srgb coverage, and is 30 bits.

  However, to achieve this 30 bit (3 x 10) mode, you must use a graphics card that allows him, as a quadro. I don't have a Nvidia GTX 760, which is 24 Bits (3 x 8) I guess.

  I would like to know how much coverage percentages are down when the monitor is plugged into a card. I would like a precise answer in percent.

  Who will help me to know if it is worth for me to invest in such a screen, that I am not able also to change my graphics card in time.

  (1) the same coverage. The number of bits is to locate the 'points' within the gamut.
  Put as an example: you have a sheet of A4 paper. It is the range. Then you can draw lines horizontally and vertically every 2 cm (~ 10 bits) and you get a set of intersections (colors) of the line. If you draw lines separated by 3 cm (~ 8-bit), you get less intersection on the same surface.

  (2) the coverage is for the native range (custom or standard OSD mode). Actual coverage for modes of calibrated pressure (sRGB and AdobeRGB) will depend on the quality of factory calibration. Expect the same from any manufacturer of the monitor with the same GBLED panels.

  It is the same for the user in LUT3D calibration CAL1 and CAL2. If bought i1DisplayPro and use LUT3D calibration software presets "sRGB" or "AdobeRGB", wait for 99, 9-100% sRGB coverage and 96-99% AdobeRGB for each case.

  (3) with a nvidia gamer will not calibrate correctly in GPU, but LUT3D calibration will work fine. For a proper calibration GOU you need to a gamer AMD (8 bits) or a pro like nv Quadro or AMD over-pants (10-bit) card

• What sound bar is good for the U2412M?

  What are my choices of sound bars for the monitor Dell UltraSharp U2412M 24.0?

  What would you recommend?

  Can Chris, you please give us other soundbar models compatible with U2412M?

  AX510 or 511, for example?

  Thank you!