Dell XPS One A2010 CD eject button works only with Windows 7

Similar Questions

• Click right button works only with Windows 7

  My right click button does not work with Windows 7. I had problems with the new cases, but with the help of your part which has been resolved.

  I fixed it!

  When I went to the control panel and the mouse, instead of searching the Internet for the latest update, which it said I already had, I went to my own PC and downloaded the driver and it works now.

  Thank you for your help.

• Mouse buttons works only with Windows 7

  Just returned from holiday, everything worked before but I try logging on to windows, and when you are prompted to select the profile that I cannot, after a while I finally get in but can not select anything on the desktop either. After a while, I start to use my keyboard so I not found this isn't my PC that freezes or whatever it is that it works fine, I can change on my mouse to another and get the same thing. Basically, the cursor works, but when I click on open areas/icons or just click on the buttons with that I get no response, even right click, I had a few moments for a few minutes where he worked, but have really no idea of why it works and why it doesn't.

  What works changes whenever I restart apparently.  Once I have restart and the left and right click of mouse buttons were functional full on taskbar, but nothing else, right now they do not work on the bar of tasks/all programs but you can click on anything on the desktop and open

  Both have been wired mouses, I mainly use the G5 wired mouse, point updated all drivers and still have the same result

  Hi MJKR,

  Try these steps and check the result.
  Step 1: Check in safe mode
  a. see start your computer in safe mode
  b. connection to the problem user account and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, then try to clean boot
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Step 3: If the problem persists, restore the computer to an earlier time
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.

  See What is system restore?

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Device driver base for Dell XPS One A2010 system

  I have a Dell XPS One A2010 - I reformatted the old Windows Vista operating system and installed a new Windows 7 operating system.  Everything seems to work fine, but in the Device Manager, in "other devices", 2 "base system device" I do not have the current drivers and I can't find it on the Dell website or any other place.  Can you help me?

  Yes, I went on the Dell site, but they were not useful.  After some extensive research, I found that the basic system 2 devices focused on the rich built in card reader and was able to solve the problem.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• DELL XPS ONE 27 - no HDMI is not detected with a xbox 360. Help!

  Hi,
  

  I have a problem:
  

  I have my Xbox360 connected to a desktop computer all in one Dell XPS One 27 "with an HDMI cable and when i change the input from Computer to HDMI the monitor does not recognize the Xbox360 and get a screen black and a sign saying "No video on HDMI input detected".
  

  The issue is that my monitor has a resolution of 2560x1440 and I think the maximum resolution that gives Xbox360 is Full HD (1980x1020). But I read that the Xbox360 still have to re-scale the image until it is appropriate (ergo, leave black edges to complete the remaining pixels or, failing enlarge reducing the quality of it), right?.
  

  Anyway, I have also tried to change the resolution of my computer and neither detects Full HD HDMI (and I'm not sure that the Computer resolution remains once I make the switch to HDMI, but in principle, yes).
  

  That's it. I have asked in shops and specialists and everyone tells me that it is possible, but I do not see where it may be bad or failure.....
  

  Thanks in advance. :)
  

  PS: The cable I use is standard HDMI cable and the Xbox is FAT Xbox360.
  

  Hello.

  To resolve this problem, you will need to check that the HDMI cable is ENTIRELY in the HDMI PLUG! Believe it or not! The HDMI on the back of the OIA 2710 is a tight fit, and I thought I was going to break the taking, but he won entirely, and the xbox was on the screen.

  THE SOCKET IS A TIGHT FIT!

  MAKE SURE THAT YOUR HDMI SOCKET IS * ENTIRELY * IN.

  SHOULD THERE HAVE NO HDMI METAL SHOWING!

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• Integrated webcam works only with Windows 8 Pro 64 Bit XPS 15 L502x

  I have a Dell XPS 15 that I bought in June of 2012.  the machine came with Windows 7 Home Premium 64 Bit and I bought it shortly after the windows $ 15 8 upgrade promotion started.  I got my download of Windows 8 and visit the support site, I noticed that on the date on which Windows 8 was officially released Ell packed in liaison with the drivers for sound, video, chipset, networking devices and so forth but Windows 8 seems not to want to play nice with the built-in Webcam.  Try using the app Windows 8 camera, Skype or anything that has the ability to use the webcam product a "There is a problem with the camera" or preview of the webcam screen will remain black also.  Even if I know that Logitech and other vendors have webcams that are ready for Windows 8, but I don't want to spend money I don't have to.  I went on the site of Dell download software that allows you to download the software that came with your computer to the factory and when I try to download both versions of the Dell Webcam software or one will download despite it telling me that I have at least two download attempts that are available.  I'm starting to wonder if this model is no longer supported.

  Hi gbcmedia2012,

  Welcome to the community,

  After the upgrade to Windows 8 its recommended to uninstall and reinstall Dell Webcam Central Application.

  Check if Dell Webcam Central is still installed on your system (Control Panel, programs and features). If so, uninstall it, restart your system and then try to download and reinstall from my Dell Downloads (MDD)

  If you are not able to redownload it from MDD, try this link below to download and reinstall:

  www.dell.com/.../DriverDetails

  Hope this helps,

  Thank you

• Headset Bluetooth Motorola HX520 works only with Windows 7

  All,

  I have a DELL XPS with win7 64 bit and would like to use my Motorola HX520 bluetooth headset.
  I can add bluetooth device but I can't select it as a communication device to make calls from Skype.
  S ' Please give some advice.
  Thanks in advance.

  Hello

  To use Skype with one Bluetooth as a wireless headset, please make sure that you use the latest version of Skype.

  Please follow the steps from the link and check that it works very well.

  Can I use a Bluetooth with Skype?

  https://support.Skype.com/en/FAQ/FA10617/can-i-use-a-Bluetooth-device-with-Skype

  I suggest contact you Skype to the Bluetooth settings. They should be able to help you.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• G70-111EM - wireless works only with Windows 7 Professional

  Dear users,

  After 1002 in the factory reset error and not be able to solve this problem. I decided to buy Windows 7 and install it on my laptop, G70-111EM.

  The problem I have now is that I can not can not to wireless internet with.  Wired LAN connection works fine.

  When I press the wireless BUTTON next to the POWER ON BUTTON Wireless market (normally lights up BLUE) OFF wireless connection (normally turns orange).  His watch currently AMBER when I keep it pressed it turns BLUE but after a few seconds goes back to amber.

  All the drivers are installed and control panel shows no conflicts.

  1 has anyone had this same problem.

  2. How can I check what the current wireless hardware I have in the laptop.

  3. If someone can help me with how to know the details of the hardware I can try and find the right driver for this hardware.

  4. I'm going tonight know the name of the driver that is currently installed as part of installing windows 7.

  AMBER LIGHT ON THE LAPTOP FOR WIRELESS

  

  INFORMATION ABOUT WINDOWS AFTER TRYING TO REPAIR

  

  ATTENTION: the download of the software/following links are only for laptop HP G70-111EM! You can find the download appropriate for your specific laptop here: LINK

  I am sure that I have the solution for you! And I'm quite depressed by the inability of HP, its employees and support their policy update

  So, there are some steps to follow, to get your Wlan rerun. To be exact: you could 'fix' in one step! But please use my complete guide, step by step! So here go us:

  1. first of all, you must use the latest version of the Bios (January 2011): update of the HP Bios

  2 run 'Windows 7 Mobility Center' by pressing the 'Windows key + X' or via your control panel (HowTo).

  3 here you can see a section 'Wireless Network '. Can you turn it on, by clicking on the button? Or is it greyed out and disabled? -Let me guess: you can not click on the button, it is grayed out? ...   Because I am sure that you could not improve the situation with previous measures, let's go on.

  4. download the HP Quick Launch Buttons for your laptop and install it.

  5 restart.

  6 always: any improvements to date? (I guess: no!)

  7 as a next step, download the HP Wireless Assistant and install it.

  8 restart.

  9 now the most important step - revive us your wireless network: click on "Start" (Windows logo), enter "assistant wireless" in the search field and select Assistant HP wireless list.

  10 upward and running, you should see your device wlan under "wireless devices installed:

  

  Click on 'Properties' and you will see ~ 4 boxes that you can check/Enable. One box ISC 'independent controls for wireless devices. Make sure that this box has a tick inside and click on apply, then when you return to the wireless assistant there should be a box that says "light" click here and my wireless turned blue immediately. However...

  11. .. . If the "Turn On" button is grayed out (yet), you have just to press the orange-light-without wire-hardware button on your laptop once. After a few seconds, the color of the 'Activate' button should change its color and you should now be able to click on it!

  I have it?

  I have this problem, too. My laptop (Presario CQ-60) HP has also incorporated this Atheros wireless card.

  

  Try almost everything that I'm still not able to reproduce the situation that suddenly off the wireless card.

  I suspect the energy options of Windows to disable the wireless card, but I'm not sure. That's why I disabled all options regarding the WLAN to save energy. This means that in advanced of ALL power management options you have prevent energy saving on the network WiFi Windows and in Device Manager stop driver wireless in its properties to disable the card in order to save energy. Here is a step by step guide:

  

  Once again: I don't know if this can help. So give it a try.

  Aside from that is not a real solution, it is only a workaround. Hewlett-Packard could not help me either, they just sent me a new wireless card. In addition they me too (as mentioned above), to reactivate the wlan module in the Bios - BUT here the same power options: there is no such option cause they cut down the Bios extremely * argh * that makes me angry!

  For ME, it is clear as mud: there is a serious bug! Whether it's a Bios, OS, wireless card/hardware or a driver/software problem is hard to say. But proposals to uninstall and reinstall the driver of a news/other/more late/old/whatever are worthless. It seems that a command indicates to the wireless card to turn off completely. And a new driver, or a restart, Windows Mobility Center or a handstand can revive - only the HP Wireless Assistant (and a complete new installation of Windows 7 for as far as I remember)!

  Interesting is also that if you turn service wireless using Windows (Windows key + X) Mobility Center, can't revive using the HP wireless Assistant, but only with the Microsoft tool. And as we have seen it is the same vice versa. But why? It's so absurd and unnecessary complicated. In fact, I never had installed HP Wireless Assistant under Windows 7. Therefore whenever this occurs, install the HP Wizard to get rid of this annoying bug. But I don't want to have this additional and unnecessary software on my PC.

  In addition: the bug persists.

  Hewlett-Packard, it's your turn!

  PS: I'm done with Microsofts Atheros function of the window update driver. In my case it connects faster than any other driver found on the internet (I also tested those on the Czech Atheros unofficial site)...

  PPS: Hope I could help

• Programs work only with windows vista

  I've had nothing but trouble with my new computer and am more convinced, it's because of Vista.  Every program that I buy, which says compatible with vista doesn't work properly or at all.  The most recent is Adobe Photoshop Elements 7.  It worked 'ok' for a short period and now does not start at all.  I uninstalled and reinstalled several times, and I get the same message "not responding".  I bought other programs and had to take them because they would not work with vista.  I also have a lot of programs that I can't use because they are not compatible with vista.  When I bought my computer, I asked for XP and learned from Dell that it came only with Vista... What I want to know is can I get a refund for vista so I can get an operating system that works?  Thank you.

  There may be a problem with the operating system.  Programs you cite have no problems on my computer and I have not heard of them being problems on someone elses.

  XP has not been for sale for a few years.  Any refund is Dell.  What edition of Vista do you have?  You can use the recovery software and restore your computer as long as the plant and start over.

  Colin Barnhorst

• Microphone works only with Windows 7 and StarCraft 2

  I have Windows 7 64 bit is installed on a computer HP Pavilion Elite (HP-M9600T), and I'm having problems to make my microphone to work with Windows 7 and Starcraft 2 (SC2).  The strange part is that I have an old analog microphone that works, but it's quality is very bad.  I bought 3 or 4 new microphones (some analog other USB) and none of them have worked.  I tried standalone and headset microphones.

  Whenever I tried a new micro, I went in the 'Sound' Panel and check that the microphone is not muted.  I check that the microphone level is high (and if mic boost is available I assure me that it is also at the top).  Then I test the microphone via the 'Listen to this device' feature in the properties of Microphone Panel and can hear my voice through my speakers when I talk.  I also see the green bar on the acoustic Panel fluctuate everytime I speak.  However, no one can hear me when I play StarCraft 2 unless I unplug the new microphone and plug the old microphone.  StartCraft 2 settings are configured to use the default device and StarCraft 2 also has a test feature of "Listen to this device" and I can hear my voice through the speakers.  Just like in the sound Panel, when I speak I can see the Soundbar of StarCraft 2 fluctuate in recognition of my voice.  However, only the old work of mic.  If my old microphone had a mute and better quality, I would ignore the problem.  However, this is not so I would get a new mic work.

  All the drivers seem to be up-to-date and indicate that they are working correctly.  I uninstalled and reinstalled StarCraft 2.  I also reinstalled Windows 7.  I used two generic drivers and installed the drivers RealTek supplied with my machine.  The two sets of drivers give me the same result.  I thought they might be in conflict, so I uninstalled the RealTek drivers, but I got the same result.  Teh generic drivers recognize my mic fine, but no one can hear me.  Any ideas?

  

  Hi tlonni,

  You can try the following steps and check if it helps to solve the problem.

  a. Click Start, click Control Panel and then double-click sounds.

  b. in the sound dialog box, click the recording tab, click on the microphone and then click Properties.

  c. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.