Delte the value after validation fails

Similar Questions

• Extract the value after the period

  Hello
  
  I am trying to extract the value from each period.
  
  I have the table data is stored in this mode 172.168.15.10, which is an IP address,.
  
  
  My requirement is I need to first value in a query with must return 172
  If I need the value after the second period, it should return 168
  
  
  Please suggest me how to write a SQL for the above requirement and oracle 11i Enterprise edition as the database.
  
  
  Thank you
  Sudhir

  with regexp

  select
    regexp_substr('172.168.15.10', '\d+', 1, :pos) s
  from dual
  

  without regexp

  select
    substr(s
          , instr(s, '.', 1, :pos) +1
          , instr(s, '.', 1, :pos + 1) - instr(s, '.', 1, :pos) -1
    ) s
  from (select '.'||'172.168.15.10'||'.'
   s  from dual)
  

  Edited by: chris227 the 01.10.2012 01:23

• Process of calculation to calculate the value after submit after all validations

  Hello

  Please help with a possible approach or suggestions for the calculation process.

  I have a calculation process after submit I want to calculate its value after that all validations are handled. Because this process of calculating trim is off of the first part of the input string of the user for the P3_USES element. Thus, for example consider; the user selects a value for P3_USES (point list manager) to be "TAC"... BCA... BCA... BCA... 0.CA BC... "CA IT BC. So my calculation process just stripes off the coast of the first portion of the string and computes the value will be "BCA"... BCA... BCA... 0.CA BC... "CA IT BC. It works fine when all postings on the page are placed without cooking.

  The problem occurs, then the validation fails on the form. Once the validation fails, the calculation process; already calculates the value and the P3_USES value form element is set to "BCA"... BCA... BCA... 0.CA BC... "CA IT BC. So, here the user solves the problem of validation and sends it again the form, but at this point the value is calculated again but this time that my string is "BCA"... BCA... BCA... 0.CA BC... CA IT BC"which is not correct, because my initial user string entry was"TAC"... BCA... BCA... BCA... 0.CA BC... "CA IT BC.

  So my question is how they treat the value of my calculation after all validations. While I can keep the original value of the P3_USES element. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database.

  Thank you

  Rambeau

  Hello

  Combine code of calculation and validation?

  Perform the calculations in the process?

  Use another element to contain the value 'real '?

  Kind regards

  Jari

• Cancel the insert values when validation fails

  Hello

  I have a problem when I try to insert new records into a table. It's simple, if a validation error occurs in any field, an error message is displayed, but fields are added to table and appear in the new line and this behavior is bad. I use 'Create' rather 'CreateInsert' operation, but it does not work.

  
  

  Here is a picture of the problem:

  
  

  

  

  1. Firstly, I fill in the required fields.

  2 when I press 'OK' dialog button to save the file, validation works because an error message is displayed, but as you can see, the fields are inserted into the table too, and I don't want this situation.

  Can someone help me?

  Thank you.

  Hello

  Yes, you need to refresh manually, you can see in testBean.java

  I have to say that the example I provided is not reset to the values in the row. It is simply not refreshing the table, then you will not see the values and the created line in the table.

  Kind regards

  Ruben.

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• Commit after validation failed

  Hello

  I have a simple page built on https://apex.oracle.com/pls/apex/f?p=98653:2.

  It has 3 validations:

  V1.1 = Condition 1 button

  BEGIN

  INSERT INTO test (cod)

  SELECT NVL (MAX (COD), 0) + 1

  TO test it;

  ---

  RETURN TRUE;

  END;

  V1.2 = Condition 2 button

  BEGIN

  INSERT INTO test (cod)

  SELECT NVL (MAX (COD), 0) + 1

  TO test it;

  ---

  SELECT MAX (cod)

  IN: P2_COD

  TO test it;

  ---

  RETURN TRUE;

  END;

  V2 = buttons 1 or 2, the Condition after V1.1 or V1.2

  BEGIN

  RAISE_APPLICATION_ERROR (-20101, 'Error');

  ---

  RETURN TRUE;

  ---

  EXCEPTION

  WHILE OTHERS THEN

  ROLLBACK;

  ---

  RETURN FALSE;

  END;

  ===========================

  Validation v2 runs after V1.1 or V1.2.

  Problem: V1.1 is restored on the execution of V2. V1.2 is not restored.

  
  

  Obs: instead of using a method, I use insertions on validations on purpose.

  Why is it? Why V1.2 is committed and not V1.1?

  Found that: Oracle APEX Blog of Dan McGhan: implicitly commits in the APEX

  But, even when...

• LOV in richeTableau resets the value after the deletion of rows from the table

  Hello. I'm on 11g R2

  I have a table with columns in the box and a button in the toolbar that removes the lines checked

  I have build it based on the following article in her string code

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

  
  

  When I run the "delete" button I execute the following code (taken as is article)

  
  

  public void deleteSelectedRows() {}

  create a second line, the value do not affect all lines

  used in ADF

  Set of rows duplicateRowSet = this.createRowSet ("duplicateRowSet");

  first row to avoid "the attempt to access the value of lines."

  exception line was dead.

  duplicateRowSet.first ();

  retrieve the current row of the table for after

  re-running the VO

  Line currentRow = this.getCurrentRow ();

  Boolean currentRowDeleted = false;

  get all rows that have the transoent attribute

  "MarkForDelete' set to true

  Row [] rowsToDelete =

  duplicateRowSet.getFilteredRows ("MarkedForDelete", true);

  If (rowsToDelete.length > 0) {}

  run only throizgh this code, if there is something to

  delete

  for (line rw: rowsToDelete) {}

  If the row is marked as the current in VO, ts value

  Boolean flag

  If (rw.getKey () .equals (currentRow.getKey ())) {}

  currentRowDeleted = true;

  }

  remove the line - do not yet commit

  RW. Remove();

  }

  rerun VO

  this.executeQuery ();

  reset the current line if it has not been removed

  If (! currentRowDeleted) {}

  this.setCurrentRow (currentRow);

  }

  duplicateRowSet.closeRowSet ();

  }

  }

  "MarkedForDelete" is a transient attribute used to mark the line delete

  The lines are removed very well.

  The problem is with lines that I do not delete.

  For example I LOV column. I chose the value LOV in a few lines, and after that choose to delete several lines (not the same lines where I modified the LOV) but some other lines.

  After I click "delete", the lines that I marked to remove deleted indeed, but the value of the LOV in other rows (I have not scored for delete) are disabled.

  How to preserve value LOV so it will remain also after I deleted some lines?

  P.S. I've tried autosubmit = "true" - it did not help

  It is expected because I see that you rerun the query.

  Once you re - run, it retrieves from the database again. Thus, your values are lost because they are not posted.

  I don't think that run query is necessary, try to have a programmatic part trigger on the table after you remove all of the lines.

  Thank you

  Alisson.

• Do not update the values after the registration of form fields

  OK, so I'm building a character auto fill timesheet system using shape. Everything works as expected until I save, close and reload the document.

  I will try to explain the movement of what is supposed to happen, and then it ends by happens.

  Field B is equal to a particular value, depending on what is entered in the field a. field C is equal to the field b. field G totals fields c.-f..

  If I re - write this from scratch, it works as expected, even if I change the to field a different value (thereby changing all other fields to reflect the new data).

  Once I save the document, close and reopen, here's what happens.

  Field B is equal to a particular value, depending on what is entered in the field a. field C is equal to what was the B field before I closed the document. Field total field c.-f. G.

  Can I change A field change and field B to the value it is supposed to. However, field C will not change. Field G still totals the values as expected, including the c. field-stuck now

  Indeed, whatever it is equal to the B field after backup and reload remains at its value prior to the closing. I have a lot of fields equal to B but B alone gets its value based on the field A. I used both "value is the sum of:"and custom JavaScript, both which gives exactly the same results. "

  I use Acrobat Pro (trial) on Windows 7 x 64.

  In format PDF is the order in which the fields are calculated is not automatic, but can be set. If field C depends on the B field and field B is dependent on the land then must ensure that the order of calculation is A-B-C, or the values in calculated fields will be a step behind the value of a field when you update it.

  You can set this command in form editing mode, under the order of computation of Set field - other tasks.

• Set the Focus after validation error message

  I have the text element.
  It s have a validation. -> The order of the day is a valid date...
  
  In the section - Error Message:
  
  < script type = "text/javascript" >
  Alert ('Invalid Date')
  
  document.getElementById("P5000_DATA_CAD_INI").focus ();
  html_GetElement ('P5000_DATA_CAD_INI'). Focus();
  < /script >
  
  My question is how do I set the focus after the validation error message?
  
  I put document.getElementById("P5000_DATA_CAD_INI").focus ();
  html_GetElement ('P5000_DATA_CAD_INI'). Focus();
  but the two isn´t of work...
  Why?
  
  Thank you

  Hello

  You must load the jQuery library in the HTML page header.
  I gave the example of how do

  Then place my example of validation error text

  BR, Jari

• NET right in paywsacv.fmb contains the value after employee termination

  Hello
  
  Published by: user12046014 on April 19, 2011 13:53

  Hmm, that's strange. When you are so close to something, it is easy to slide up on a couple of obvious things. You can simply check:
  (1) this quick formula change was applied and saved
  (2) the formula change was not an update date of turn and these changes apply for the duration of the fast formula
  (3) that this Fast formula is defined as the rapid accumulation of the accumulation Plan form, looking to
  (4) that you have followed by date to a date beyond the date of termination of the employee
  (5) who in FastPath > accrued interest gross payment (the one on the first line of the retail block) is equal to zero

  If the foregoing is true I don't understand how your gross payment is zero. I see that your Fast formula looks like it has some sort of custom logging mechanism. This could be used to write the values of ACP_TERMINATION_DATE and Calculation_Date for us to verify that they are as expected?

• Problem of update in table form (after validation fails)

  Hello.

  I have a problem on the shape of tables using APEX 4.2.5.

  Application page has a table and a filter element to filter results in a table.

  The default value of this element is 0 (zero). This means that all the records are retrieved.

  SQL WHERE clause look like where deptno = decode(:P1_deptno,0,deptno,:P1_deptno)

  I created testcase: https://apex.oracle.com/pls/apex/f?p=4000

  W: nlzoh

  SUP: test01

  P: test

  The application name is A1.

  Everything works fine (insert and update), until there are validation error - due to an incorrect value in the column form.

  If I add by example in the second row (ename BLAKE) in the column WORK 1111 - so it would look like MANAGER1111 I get a validation error.

  Then I remove 1111 so validation would be ok, form insert 16 records (all). I is not updated that one record, it inserts all records.

  This allways happens after the validation error.

  
  

  When there is no validation error, changed row is updated as expected
  

  Insert also didn't happen, when there are value DEPTNO in filter.

  So the unexpected result is because of that where would adopt.

  
  

  So I have two questions.

  1. Why does it inserts all lines after the validation error? When there is no validation error, only the changed rows are updated - even if there is no DEPTNO in the filter.

  -Why modified column id drop apex?
  

  2. How can I change where clause, so iz will not work correctly.

  
  

  I hope it's understandable.

  
  

  Kind regards

  Dean
  

  
  

  Hello

  I created a new shape similar to your condition. His work with no problems.

  Please check Page 2 of application A1

  BR,

  Patrick

• analog output while keeping the value after the program

  I use a USB 6001 output a simple analog voltage. Right now I'm still in the process of experimenting to see how to control my blood pressure when I noticed that, after I complete my program, data acquisition is always show the last analog value.

  My VI is attached. I use the stop and remove commands at the end of the program so I don't understand why he continues to keep the last value. I used a breakpoint, so I know that program happened to stop and clear commands.

  How to exit back to 0 when I close the program, assuming that there is some other way than the writing of 0 at the end of the program.

  I did not find the related items, but if it don't just answer with a link.

  I thank very you much for any assistance.

  Tommy

  The DAQ hardware is supposed to retain the last value so write a 0 before deleting the task is the right method.

• Change the values after the if statement

  I am putting together a form using 8 Pro user interface components. I have a combo box list called timeOf_cb. The drop-down list box is loaded with values from 1 to 12 for the hours of the day. Directly after I have a radio button set called timeSet and two boxes are labeled h & h respectively. in the code below, I get different values of one path to another. I've been on this during two days now and I need to go to this project. It seems that something as simple to get hung up.
  
  Action = timeOf_cb.selectedIndex;
  pmTrigger = String (optPM_rb.value);
  
  trace (pmTrigger); Here my output comes out as 'false' if optPM_rb is not chosen
  
  Soak up format
  
  If (pmTrigger = 'true') / / this should not trigger if 'false' but somehow fires anyway.
  {
  trace (pmTrigger); Here my output comes out as 'true' even with no change?
  timeOfLoss = ((timeOf + 12) * 100);
  trace (measure);
  }
  on the other
  {
  Measure = permeate;
  }
  
  
  * The variables have been declared before this line of code as var impregnate, pmTrigger;

  Sometimes, it appears to be something small, a piece of syntax that makes the difference between pull out your gray hair and a waste of time. Another '=' is the answer to my own post.

  Cyrano the 'if' statement requires a double = before the string literal.

  If (pmTrigger is "true")
  {
  trace (pmTrigger);
  timeOfLoss = ((timeOf + 12) * 100);
  trace (measure);
  }
  on the other
  {
  Measure = permeate;
  }

  Now you can pass me with all the instructions of additional tracing and Else superfluous. What is everything? Laughing out loud

  Coffee anyone?

• delete the partition after a failed installation of windows 10

  Hello world

  How is it possible to delete partitions, if in disk utility, there is no possibility to click on the '-' key?

  So I made a failure (several) attempts to install windows 10 on my new iMAC.

  I could download an ISO of windows and start the bootcamp assistant.

  In the last attempt of last night, I selected the bootcamp in windows installation partition, however, installing windows said it was impossible to read the hard drive.

  I then re-formatted this partition (BOOTCAMP) in the installation of windows, and after that, still could not read.

  Then, I deleted the bootcamp partition in windows and re-created a partition on "unallocated space" in the windows installation.

  Installing windows 10 still wouldn't move forward then I've bailed out and went back to OS X with the hope of turning it back on (again) by deleting partitions.

  I was unable to delete the Mac partition.

  Then, I deleted this partition (the one original bootcamp) and reformatted as OS x journaled. At least now, I can see the Partition.

  However in Diskutil, I was then impossible to delete this Partition. There is also a small partition 16 MB that cannot be erased.

  Wizard bootcamp will be past a pop up station: the startup disk cannot be partitioned or restored to a single partition.

  So I will now try to delete these partitions (the boy and the training camp original one) merge into the original and give then installing bootcamp, another go when I have a lot of energy!

  any help would be appreciated. I'm a little cautious to use Terminal command lines for fear of ruining my new computer.

  concerning

  Evan

  1. your iMac has a Fusion drive?

  2. don't mix to disk utility and Wizard of BC. They can lead to a host of issues.

  3. If you do not typos in the Terminal, they provide much more rich in detail. You have a Time Machine backup, put in place?

  4 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Write PDM, duplicates the value after each race and works very well that if the probe tool is on

  Hi all!

  I am facing a weird problem with my vi. The PDM write in my case/State records "Transformation", the data processed for each channel of each race. However, instead have a different set of data for each race, I get the same set of data for all lines. It is basically just duplication of first series of data in each row of each series. And the strange thing is that if I use the tool to probe on the son will tdms writing in the same case, it records the actual data in respective rows. with probe tool, it looks like good data in and record the correct data, without it, it duplicates only the first line. can someone please understand what going on with her?

  I have attached the VI. While at it, feel free to provide your comments/suggestions on me vi design, so that I can work out which actually better.

  I appreciate all the help in advance!

  Nilesh-

  I thought about it. In case of treatment, I was reading from the same group eaverytime. all data processign was same. All I had to do was get the current value of the Group since the property node and the wire to tdms playback function.