Problem of update in table form (after validation fails)

Similar Questions

• Problem with update of table (using the subquery to retrieve value)

  Hello
  I update a table based on the value of the subquery.
  Here's the update statement.
  
  UPDATING temp xm
  SET xm.col1 = (SELECT DISTINCT col1
  Of
  (SELECT col1, col2 COUNT (col2)
  FROM table2
  WHERE col1 = xm.col1
  AND col2 = xm.col2
  GROUP BY col1)
  where col2 in (select... in the table3)
  )
  WHERE xm.col5 = < value >
  AND xm.col6 = < value >
  
  When I run this statement I get following error.
  ORA-00904: "XM". "" Col1 ": invalid identifier.
  
  Can someone help me why I get this error?
  Why doesn't the main table alias in the subquery?
  
  Is it possible to avoid this / re - write the query in a different way?
  
  Thank you
  
  Published by: user552703 on November 2, 2009 20:42

  You can nest only 1 level deep (referring to the table to be updated).

  Have you looked at using the MERGE command? It is "easier" perform updates of this nature, assuming you are using a recent version of Oracle (9 or MORE).

• Updated a table form

  Hello-
  
  I'm doing what (should) be an easy task, but I'm pulling on what remains of my hair. I can't update an Access table.
  
  tble_message has the following fields:
  messagesID: AutoNumber/key
  [number of data type]
  [data type text]
  Date [data type Date/time]
  [text from data type]
  time [data type Date/time]
  
  
  I created the following form:
  -Start form.cfm-
  
  < FORM ACTION = "input2.cfm? newcall2 = YES & told = #URLEncodedFormat (told) #& budName = #URLEncodedFormat (b udname) ' # ' method = Post >"
  
  < INPUT TYPE = "hidden" NAME = "to" VALUE = < cfoutput > #toID # < / cfoutput > >
  < INPUT TYPE = "HIDDEN" NAME = "from" value = < cfoutput ' #LoginName # ' > < / cfoutput > >
  < INPUT TYPE = "hidden" NAME = "DATASOURCE" VALUE = "testdb" >
  < INPUT TYPE = "hidden" NAME = "TABLENAME" VALUE = "tbl_Messages" >
  
  Message to: < cfoutput > #budName # < / cfoutput >
  
  < NAME TEXTAREA = LINES 'YMESSAGE"="5"COLS ="40"WRAP ="Virtual"> < / TEXTAREA >
  
  < INPUT TYPE = "Submit" VALUE = "send message" >
  < INPUT Type = "reset" Value = "start over" >
  < / make >
  -end form.cfm-
  
  
  
  
  This form feeds input2.cfm
  
  
  
  -Start input2.cfm-
  < cfoutput >
  #message #.
  #toid #.
  #loginName #.
  < / cfoutput >
  
  < cfquery name = "addmess" DATASOURCE = "testdb" >
  Insert Into tbl_Messages
  (message, to, of)
  
  Values
  ("< cfoutput #message # > < / cfoutput > ',' < cfoutput > #toid # < / cfoutput > ',' < cfoutput > #loginName # </foutput > c '")
  )
  < / CFQUERY >
  -end input2.cfm-
  
  I do not see the expected in my cfoutput values:
  
  < cfoutput >
  #message #.
  #toid #.
  #loginName #.
  < / cfoutput >
  
  
  = error =.
  I get an error of running database query
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft]
  [ODBC Microsoft Access driver] Syntax error in Insert Into statement
  
  the error occurred in c:\... input2.cfm: line 21
  
  20 values
  21 ("< cfoutput #message # > < / cfoutput > ',' < cfoutput > #toid # < / cfoutput > ',' < cfoutput > #loginName # </foutput > c '")
  22 < / CFQUERY >
  
  = end error message =.
  
  Form fields:
  FieldNames: to, from, datasource, tablename, ymessage
  from = chancho2000
  TableName = tbl_messages
  to = 100
  ymessage = test entry form
  
  URL parameters:
  newcall2 = yes
  Told =
  
  
  
  .. I can't feed the database
  
  help or direction would be appreciated... Thank you!
  
  
  
  
  dieg0

  By the MS Article shown here

  http://support.Microsoft.com/kb/286335

  FROM is a word reserved, even if he is not, then this is the real problem with the INSERT statement. Note, however, that all of the suggestions above about the syntax, cfqueryparam, et al. are on-site and must be followed.

• Problem with update of table...

  Formum Dear members,
  
  Please do not kill me for this question, but after the execution of this query (DATE_OF_INVENTORY is a DATE field):
  
  UPDATE SET DATE_OF_INVENTORY = "; (and sending a commit afterwards), the area of the DATE_OF_INVENTORY of all the lines remains the same!
  
  So: How can I solve this?
  
  See you soon,.
  Johann

  Is there a trigger on the table that puts sysdate in this column?

  select trigger_name
  from user_triggers
  where table_name='A';
  

  Max
  http://oracleitalia.WordPress.com

• Problem with update of the system after running a registry cleaner

  I am running the latest update of the 3.14.0017 system and after that I ran the McAfee registry cleaner (big mistake!), I now get "not applicable to your system of packages were found.

  I tried a system restore and restore failed.  So I uninstalled the update system and reinstalled and still get the same message.

  Services and the program SU "runs."

  Help!

  
  

• and problem by updating the table

  SQL> update users set coname='Falcon Minerals & Metals' where co_id=1020;
  
  update users_loc set country='Finland' where co_id=1020;Enter value for metals: old   1: update users set coname='Falcon Minerals & Metals' where co_id=1020
  new   1: update users set coname='Falcon Minerals ' where co_id=1020
  
  1 row updated.

  Thank you and best regards

  SQL > SET DEFINE OFF

• Cannot download updates Windows due to the validation failed in IE8, but Firefox valid / downloads OK

  When I try to download an update such as KB971514, the States of MS web page validation is necessary.  When I press on continue takes you to a page of validation with another button continue to validate.  I click on that and you get a result of vaildiation failed.  However, when I press the button "validate now" it validates fine

  I havd a 100% legal OS and software and download updates without any problem.  Validation has never been a problem until now.

  I had vista on my molding machine home for 3 years with no problems.  However, did move to Ultimate Apr 2010.

  Any ideas why IE8 fails?

  woxof,

  I don't know if this can somehow apply in your case, it does not hurt to try the link http://support.microsoft.com/default.aspx/gp/pc_ie_v8intro

  you will find Internet Explorer-specific support in this MS forum: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads

  I hope that this post is useful.

  Let us know how it works.

• Problem with updates on Windows 8 - Configuration has failed & returning Exchange

  First of all

  I want to apologize for asking questions about the problem which has been solved so many times...

  ... and yet it seems that no solution applies to / solved my problem.

  Let me describe my situation and context "briefly":

  I have install Windows 8 Pro, I have installed in September 2012. I had been provided with Win 7 and Win 8 activation as a computer SCIENCE student keys during my studies. I have not used 8 win a lot since I preferred Win 7 and I only wanted to test the 'product '.

  Judging by the time when previous updates have been installed, the system was launched several times in March 2013, December 2013 and January 2014. After that, the system "folded" so far. When I launched the system on 26.07.2015 there was like 50 updates that have been prepared (or wanted to be installed... Let's say "pending"). About 30 of them installed successfully. Then I double-checked. I used to double check the availability of updates when some fail to install (mainly from my previous experience that sometimes an update is no longer necessary when another installs).

  Now, to the point...

  I have 133 major and 3 optional updates that want to be installed. Everything that I select (few of them), or all of them fail to install. Installation begins normally, then needs to restart (all) and during the nex to the top starting, the updates can "Configuring updates... 98% ' and then fail and are starting to go back.

  The system is more or less vanilla installation with some basic drivers and the 3DMarks so I doubt that I've caused this problem.

  I've been googling and try to solve this problem for 5 days now, here's what I found:

  1. first of all, I tried sfc / scannow to see if there is any corruption. I received the message that some files were corrupted and could not be repaired. The launch of 6 and 7 of this order, I finally got the "Windows Resource Protection has not found any breach of integrity." (it is true however that I tried a lot of solutions in the meantime). However before that, the CBS.log newspaper included information that:

  Cannot repair Member "utc.app.json" file

  (also of telemetry ".") "ASM - WindowsDefault.json" and I think that 'Amd64\CNBJ2530. PBO' have been mentioned... several times)

  But as I said, from this moment I do not have this problem.

  2. because I had problem with CFS, I tried DISM.

  ScanHealth gave:

  The component store is repairable.
  The operation completed successfully.

  However, RestoreHealth was not optimistic:

  The restore operation failed. Be the source of repair was not found or the comp
  onent store is not repairable.

  The journal includes:

  Preparation of control system was updated.

  Summary:
  Operation: Detect and repair
  Result of the operation: 0x0
  Last successful step: any operation is complete.
  Total of Corruption detected: 0
  CBS manifest Corruption: 0
  CBS damaged metadata: 0
  Corruption shows CSI: 0
  Corruption of the CSI metadata: 0
  The Corruption of the CSI Payload: 0
  Total fixed Corruption: 0
  Repaired CBS manifest: 0
  Manifesto of CSI repaired: 0
  Repaired CSI payload: 0
  CSI store metadata refreshed: true

  3. the 'solution' next I'm focused on a system reserved partition. I came to the information Windows 7 uses 100 MB Sys. Reserved partition while Windows 8 uses 350 MB. I think I stumbled on information that it can be connected to the problems so modified the partition of provision (safely, in regards to the system reserved partitions and Windows 8) and increased the extra partition of 250 MB. This however proves to not be connected.

  4. some sources claimed that C:\Windows\SoftwareDistribution/download content may be the case. So after the Windows Update service has stopped I deleted the download content (I think on 1 try I deleted event pending.xml from WinSxS. Of course then I restarted the redownloaded updates of service, etc...

  5. I tried the update servers MS Windows Diagnostic.cab (just for the record, this tool renames pending.xml among others). This diagnosis is always problems no matter how many times I launch. It shows sometimes 2, sometimes 3 questions for example:

  

  Here are the main 'solutions' that I tried, but as you can guess, none of them worked. Just for the Windows registry has reported these problems viac Action Center:

  

  And I also found some information in WindowsUpdate.log:

  2015-08-02 01:27:28, error CSI 00000004@2015/8/1:23:27:28.681 (F) CMIADAPTER: failed. HRESULT = c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)]
  Element:
  [163]""
  [gle = 0 x 80004005]
  2015-08-02 01:27:28, error CSI 00000005@2015/8/1:23:27:28.681 (F) CMIADAPTER: out with HRESULT = c004f01f code [error, facility = FACILITY_ITF, Code = 61471 (0xf01f)].
  [gle = 0 x 80004005]

  2015-08-02 01:27:28, error [0x01803c] CSI 000000db Failed (F) execution of the installation queue item: SppInstaller ({1b265fd2-721c-4e59-ad55-9d102a5d1d7f}) with HRESULT c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)].  Failure will not be ignored: a restoration will begin after all operations in the queue of the installer; Setup is reliable (2) [gle = 0 x 80004005]

  Here, the infamous rollback is mentioned. I was not able to identify the exact update (or updated) what causes these cancellations so I hope it's something I could be helped with at least. The internet is full of KBs that this cause so I can't count on that, at least for now. I also want to note that I tried everything under boot. And also can not clean installation since I have no more join the MSDNAA where I had as a student activation key. I hope that I could upgrade to Windows 10 without him in the coming months, so that's why I concentrate on getting this environment to work and migrate to it in time.

  I'll be very grateful to anyone who can help me with this problem.

  In & out.

  John

  Given that no one could help you, I myself helped ^^.

  First of all, to all those who have problems with the fact that their updates install suddenly, you must change the settings for Windows Update. Change the option other than an automaticall installation (I used the automatic download, manual installation). In this way, you can install the updates in smaller batches. Personally, I installed updates to 5 or 10 (or almost). The updates that have been tens of MB, I installed only. What struck me most surprised, I could (at the time) to install all updates. In the case where you wouldn't you know at least certainly update you need to solve the problems.

  After all updates have been installed, I turned on the automatic download and installation.

  Concerning

  John

• Commit after validation failed

  Hello

  I have a simple page built on https://apex.oracle.com/pls/apex/f?p=98653:2.

  It has 3 validations:

  V1.1 = Condition 1 button

  BEGIN

  INSERT INTO test (cod)

  SELECT NVL (MAX (COD), 0) + 1

  TO test it;

  ---

  RETURN TRUE;

  END;

  V1.2 = Condition 2 button

  BEGIN

  INSERT INTO test (cod)

  SELECT NVL (MAX (COD), 0) + 1

  TO test it;

  ---

  SELECT MAX (cod)

  IN: P2_COD

  TO test it;

  ---

  RETURN TRUE;

  END;

  V2 = buttons 1 or 2, the Condition after V1.1 or V1.2

  BEGIN

  RAISE_APPLICATION_ERROR (-20101, 'Error');

  ---

  RETURN TRUE;

  ---

  EXCEPTION

  WHILE OTHERS THEN

  ROLLBACK;

  ---

  RETURN FALSE;

  END;

  ===========================

  Validation v2 runs after V1.1 or V1.2.

  Problem: V1.1 is restored on the execution of V2. V1.2 is not restored.

  
  

  Obs: instead of using a method, I use insertions on validations on purpose.

  Why is it? Why V1.2 is committed and not V1.1?

  Found that: Oracle APEX Blog of Dan McGhan: implicitly commits in the APEX

  But, even when...

• Delte the value after validation fails

  I've got some date and time in my form fields.

  Because users tend to ignore the error of the validation message they got and data that has been overgiven were too bad, I want to delte the fieldinput if validation has failed.

  Does anyone have a script in his hand?

  Already thanks for looking here

  Lisa

  PS. : A user can easily fill a datefield with the calendar... is there not something similar to a timefield to show him what format it should enter in time?

  Just a small correction to the affection of the leap year.

  It should be something like ((AAAA %4 == 0 && AAAA % 100! = 0) |) YYYY % 400 == 0).

  If you can, put the current version of your form so that we can look at it please.

• Updating of Web Forms

  Hi all
  
  I am facing a problem with updating the data forms. I opened a data form, the data is displayed perfectly. I run a calculation script to manipulate the data. I click on the "GO" button, but data is not manipulated. When I close the form and re - open, the data is updated with changed data. It seems that it is not the 'GO' button to fetch the latest data? It happens with all forms. Can you please help me. I have fun 11.1.2.2 version.
  Thank you

  If you want to refresh the form, just click the icon refresh, the thumb (arrow) not allowing to change the POV.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• Windows 7 Genuine Validation failed after the update of the BIOS

  Machine - HP Pavilion g6-1010tu

  System - Windows 7 Home Basic 32-bit

  Recently I updated the system with the latest version of the BIOS, and suddenly to reastart OS is not genuine. I tried to contact Microsoft, and it did nothing, so I had to get off using Windows recovery.

  How update the BIOS without any change on the Windows license?

  It would be possible to use the product key on your windows sticker & activate by phone.

  It is probably not Microsoft but more likely to have a problem with the SLIC tables in the new BIOS that you are trying to install.

  Better stick with the BIOS of your work & approved as BIOS constantly updated with minor changes & for users without problems on BIOS current tends to be more difficult than to a value... BIOS flash only if really necessary because problems risk is quite high.

• why I can not update the table after you have done the process?

  Hello

  For now I create a reservation system of material for my new project and I have a problem to update the data after reserved for equipment. It should reduce the amount ask you in the store but nothing. Can someone help me?

  Here is my code:

  <?php
  $connection = mysql_connect("localhost", "ayden", "pass"); // Establishing Connection with Server
  $db = mysql_select_db("equipment", $connection); // Selecting Database from Server
  
  
  $res= mysql_query("SELECT * FROM squash WHERE Equipment='".$equipment."'");
  $row= mysql_fetch_array($res);
  
  
  if(isset($_POST["submitBook"])){
  $FullName=$_POST['FullName'];
  $IDNumber=$_POST['IDNumber'];
  $PhoneNumber=$_POST['PhoneNumber'];
  $equipment=$_POST['equipment'];
  $Quantity=$_POST['Quantity'];
  $clockbox=$_POST['clockbox'];
  $textsports=$_POST['textsports'];
  
  
  $dbTableName=$_POST['tablename'];
  
  
  
  
  
  
    $sql     = "UPDATE squash SET Quantity=Quantity - '".$Quantity."' WHERE Equipment='".$equipment."'";
    $res = mysql_query($sql) or die("Could not update".mysql_error());
  
    echo "<script type='text/javascript'>alert('Successfully Booked!')</script>";
    header("Location:equipment.php");
  
  
  }?>
  
  
  

  hope someone can help me to check it and correct me...

  Thank you.

  You must assign the current amount to a variable using a while loop after the SELECT query:

  $res = mysql_query ("SELECT * SQUASH WHERE the equipment =" ".") $equipment." "") ;

  $row = mysql_fetch_array ($res);

  While ($row = mysql_fetch_array ($res)) {}

  assign the current quantity in the database to a variable

  $currentQuantity = $row ['quantity'];

  }

  Then after the data of $_POST, you need to work on the new amount based on the amount of current less the $_POST ['quantity']

  work on the new quantity

  $newQuantity = $currentQuantity - $Quantity;

  Then use variable $newQuantity to update the datbase:

  $sql = "UPDATE SET quantity = squash" "." $newQuantity. "" WHERE the equipment = "". " $equipment. » "« ;"

• How do I update the table in Jdev

  Hello

  I use Jdev 11.1.1.7.1.

  The control of data, I added that ADF only read the table. When I click on the button create and return to the report screen, highlight lines are added.

  Highlighted those who is not inserted into the DB table but he showed in the report. How to remove it. How can I update the table?

  

  Kindly advice me.

  Thank you

  Swathi

  That's what I got:

  -You have a table read-only, and a link to create.

  -When you press the link create a popup will be launched with a new record (may be a form in the same table iterator).

  -When you press save to save the changes validation triggers, stop you to insert the record.

  -After the fire of validation you will close the pop-up window (by pressing icon or by pressing Cancel).

  -After closure of the pop-up window, you will find that reading one table has some blank lines.

  If it is your problem if you have 2 choices:

  1. in the AppModule you can make a new instance on the view object (to which redirect the table) If your view object called 'EmployeesView', so, in AppModule, you should have EmployeeView1 and EmployeeView2 and your table may point to EmployeeView1, and when you create new line create in EmployeeView2 and after completing the creation you can run the query and then refresh the table (as shown in the following code).

  2 - the second option in the popup cancelListener link at the rear bean method then you can update the table by program as:

      DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("TableIteratorName"); // from pageDef.
      iter.getViewObject().executeQuery();
      RequestContext.getCurrentInstance().addPartialTarget(getTableComponent());// from table Binding property bind it to object in back bean