NET right in paywsacv.fmb contains the value after employee termination

Similar Questions

• Creating a variable that contains the value of the variable system (Long) Date of change

  Can someone tell me how to write a script to create a variable named DocDate, which contains the value of the variable of system (Long) Date of change? Or write a script that creates a variable named DocDate, which contains the current date? I can't find a lot of documentation on scripting ExtendScript.

  Hi Julee, when you create a user variable in the interface, you cannot include the building blocks of time in the definition. They can only be used in system like the System Date of Modification (Long) variable variables. So the question is, why not just use the variable Date of change (Long) system in your document? What is the purpose of the variable user DocDate? Let me know what you think here, and I can try to help you.

  Here are some ExtendScript resources:

  My blog: FrameAutomation.com | FrameMaker, faster and more effective to

  Debra Herman blog: Extension of FrameMaker

  The large samples of Russ Ward: FrameMaker ExtendScript samples - West Street Consulting

  -Rick

• Would like to know which table in the repository contains the value of the operating system

  Hello
  
  I would like to know which table in the repository contains the value of "Owner operating system".
  
  Any ideas.
  
  Thank you
  Paul

  The following query should help you:

  SELECT t.target_name agent_name, cm.string_value mgmt_targets Os_User t, mgmt_metrics m.
  cm mgmt_current_metrics WHERE t.target_type = 'oracle_emd. '
  AND m.target_type = 'oracle_emd' AND t.target_guid = cm.target_guid AND cm.metric_guid = m.metric_guid
  AND m.metric_name = 'EMDIdentity' AND m.metric_column = 'username' AND m.type_meta_ver = t.type_meta_ver;

  Best regards
  Vincent

• Process of calculation to calculate the value after submit after all validations

  Hello

  Please help with a possible approach or suggestions for the calculation process.

  I have a calculation process after submit I want to calculate its value after that all validations are handled. Because this process of calculating trim is off of the first part of the input string of the user for the P3_USES element. Thus, for example consider; the user selects a value for P3_USES (point list manager) to be "TAC"... BCA... BCA... BCA... 0.CA BC... "CA IT BC. So my calculation process just stripes off the coast of the first portion of the string and computes the value will be "BCA"... BCA... BCA... 0.CA BC... "CA IT BC. It works fine when all postings on the page are placed without cooking.

  The problem occurs, then the validation fails on the form. Once the validation fails, the calculation process; already calculates the value and the P3_USES value form element is set to "BCA"... BCA... BCA... 0.CA BC... "CA IT BC. So, here the user solves the problem of validation and sends it again the form, but at this point the value is calculated again but this time that my string is "BCA"... BCA... BCA... 0.CA BC... CA IT BC"which is not correct, because my initial user string entry was"TAC"... BCA... BCA... BCA... 0.CA BC... "CA IT BC.

  So my question is how they treat the value of my calculation after all validations. While I can keep the original value of the P3_USES element. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database.

  Thank you

  Rambeau

  Hello

  Combine code of calculation and validation?

  Perform the calculations in the process?

  Use another element to contain the value 'real '?

  Kind regards

  Jari

• Extract the value after the period

  Hello
  
  I am trying to extract the value from each period.
  
  I have the table data is stored in this mode 172.168.15.10, which is an IP address,.
  
  
  My requirement is I need to first value in a query with must return 172
  If I need the value after the second period, it should return 168
  
  
  Please suggest me how to write a SQL for the above requirement and oracle 11i Enterprise edition as the database.
  
  
  Thank you
  Sudhir

  with regexp

  select
    regexp_substr('172.168.15.10', '\d+', 1, :pos) s
  from dual
  

  without regexp

  select
    substr(s
          , instr(s, '.', 1, :pos) +1
          , instr(s, '.', 1, :pos + 1) - instr(s, '.', 1, :pos) -1
    ) s
  from (select '.'||'172.168.15.10'||'.'
   s  from dual)
  

  Edited by: chris227 the 01.10.2012 01:23

• sum of column that contains the values in the time format

  Hi all
  
  I give you a piece of my code below

  SELECT  dif.EMPLOYEE_NUMBER Employee#, dif.FULL_name EmployeeName,
   TO_CHAR(START_DATE,'dd-Mon-rrrr') DOJ ,dif.DEPT_NAME,POSITION , DATE_ENTRAY AttendanceDate,
  
   to_char(DATE_ENTRAY,'DY') day, TO_CHAR(LNE1,'hh24:mi')TimeIn1 ,TO_CHAR(LNE2,'hh24:mi')TimeOut1,
   
   TO_CHAR(LNE3,'hh24:mi')TimeIn2 ,TO_CHAR(LNE4,'hh24:mi')TimeOut2, TO_CHAR(LNE5,'hh24:mi')TimeIn3 ,
  
   TO_CHAR(LNE6,'hh24:mi')TimeOut3, to_char(decode(LNE8,null ,
  
   decode(LNE7,null, decode(LNE6,null, decode(LNE5,null, decode(LNE4,null, decode(LNE3,null,
  
   decode(LNE2,null,LNE2 ,LNE2 ),LNE3 ),LNE4 ),LNE5 ),LNE6 ),LNE7 ),LNE8 ),'hh24:mi')TimeOuts ,
   
   ACT_HOUR Work_Hrs, 
  
  decode(DLY_ABSENT_TYPE,'Late',DED_ABS ,'Late (Deduction)',DED_ABS,'00:00') Late_Hrs,ACT_OVT Over_Time
   FROM jjj_PUNCH_DATA_EMP_LIST trn , 
   jjj_emp_def dif,jjj_PUNCH_CARD_ELEG ele WHERE trn.EMPLOYEE_NUMBER =dif.EMPLOYEE_NUMBER and   
   ele.EMPLOYEE_NUMBER =trn.EMPLOYEE_NUMBER  and   DATE_ENTRAY between '23-Aug-2009' and  '24-Aug-2009' 
  
  I require to find the sum of column  wrk_hrs
  Act_hour or wrk_hrs belongs to table  jjj_PUNCH_DATA_EMP_LIST trn , and the datatype of act_hour is varchar(10 byte)
  the values of column act_hrs, (i require the sum of this column)
  08:00
  07:22
  06:08

  kindly help
  thanking in advance
  
  concerning
  Oracle user

  Hello

  Thanks for posting the CREATE TABLE and INSERT. That really helps.

  Do you want 19:33 ' as the output? Which makes it look like 19 hours and 33 minutes. Most people would represent 19.33 hours (i.e. 19 more than 1/3 hours) as 19:20 '. Should not the sum of
  ' x: 00 ' and
  'y: 20' be
  "z: 20?

  If you really want 19:33 ', see the solution of Hoek.

  If you really want 19:20 ', then you were on the right track.
  I think that you were trying to do:

  WITH  got_total_hours     AS
  (
       SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                  + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                    / 60
                    )
                  ) AS total_hours
       from      p
  )
  SELECT        TO_CHAR (FLOOR (total_hours))
         || ':'
         || TO_CHAR ( MOD (total_hours, 1) * 60
                 , 'fm00'
                 )     AS hh_mm
  FROM     got_total_hours
  ;
  

  Looks like you were trying calculate total_hours in a subquery, then use the total_hour alias in a query Super, which is quite accurate. You're just confused on how to write a subquery.
  There are two basic ways to write subqueries:
  

  (1) WITH clause:

  WITH  sub_query  AS
  (
       SELECT  ...
  )
  SELECT  ...
  FROM      sub_query
  ;
  

  (2) online review

  SELECT     ...
  FROM     (     -- Begin sub_query
       SELECT     ...
       )     -- End sub-query
  ;
  

  Looks like you tried a bit of each method.

  In most cases (this included problem) either one will work.
  Other problems are much easier by using a WITH clause and WITH clauses are usually easier to read and understand, I recommend that you always use a WITH clause rather than views online.

  You can also change the Hoek solution to get the result 19:20 ' without a subquery (or without using any expression complicated, more than once, which is the only reason why I have proposed a subquery). Since date arithmetic Oracle comes from the days, not hours, when the solution of Hoek has calculated the number of hours, you'll have to divide by 24 to get the number of days. If you are using TO_CHAR to fit the time, however, the results can be confusing if the total is 24 hours or more. You might be better off using NUMTODSINTERVAL.

• What SYS tables (not seen) contains the value NULL spec /not/ column definition?

  What SYS (or tables) store the value of a spec /not/ NULL columns? (It doesn't seem to be COL$)
  
  NOTE: This is NOT a trick question - although it seems to be.
  
  Test configuration:

  BANNER
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  Test configuration:
  1. a table is created by SCOTT in the SCOTT schema with a NULLABLE column.
  
  2. a primary key constraint is added using only the NULLABLE column
  
  3. Requests for information on USER_TAB_COLS, ALL_TAB_COLS, DBA_TAB_COLS and SYS. COL$ see NOT NULL for the column NULLABLE
  as necessary for a primary key constraint. Views derive their data from the column of $ NULL the sys. Table of $ COL
  using

  'DECODE (SIGN (c.null$), -1, 'D', 0, 'Y', 'N'),

  and the table of $ COL shows a numerical value of '0' before you add the primary key and a value of "1" later.
  
  4. a query on the DDL metadata table shows the specification for column NULLABLE of origin involved.
  
  Question - where this original specification NULLABLE is stored?
  
  This question is based on a question asked by another user in this thread
  Columns becoming nullable after a fall of primary key?
  
  I created the following specially for that matter test case

  -- scott ensures table does not exist
  DROP TABLE tbl_test CASCADE CONSTRAINTS;
  
  -- scott creates a table
  CREATE TABLE tbl_test ( col_1 NUMBER,
  col_2 NUMBER NOT NULL);
  
  -- scott queries to check the the column nullable status
  SELECT table_name, column_name, nullable 
  FROM user_tab_cols
  WHERE table_name = 'TBL_TEST';
  
  -- TABLE_NAME | COLUMN_NAME | NULLABLE
  -- TBL_TEST   | COL_1       | Y 
  -- TBL_TEST   | COL_2       | N 
  
  -- Scott addes a primary key constraint using only the nullable column
  ALTER TABLE tbl_test ADD CONSTRAINT tbl_test_pk PRIMARY KEY(col_1);
  
  -- scott queries to check the the column nullable status
  SELECT table_name, column_name, nullable 
  FROM user_tab_cols
  WHERE table_name = 'TBL_TEST';
  
  TABLE_NAME,COLUMN_NAME,NULLABLE
  TBL_TEST,COL_1,N
  TBL_TEST,COL_2,N
  
  -- scott queries to get the table DDL
  select dbms_metadata.get_ddl('TABLE', 'TBL_TEST', 'SCOTT') FROM DUAL;
  
  DBMS_METADATA.GET_DDL('TABLE','TBL_TEST','SCOTT')
  
    CREATE TABLE "SCOTT"."TBL_TEST" 
     (     "COL_1" NUMBER,                   <------ where is this NULLABLE spec stored? 
       "COL_2" NUMBER NOT NULL ENABLE, 
        CONSTRAINT "TBL_TEST_PK" PRIMARY KEY ("COL_1")
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS NOCOMPRESS LOGGING
    TABLESPACE "USERS"  ENABLE
     ) SEGMENT CREATION DEFERRED 
    PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    TABLESPACE "USERS" 

  The DOF shows that Oracle keeps the original spec NULLABLE for the column and uses it to generate the DDL orginal, even if there is a primary key on the table and the system views (and COL$) show the column non NULLABLE.
  
  So where is the original information NULLABLE actually stored?

  rp0428 wrote:
  What SYS (or tables) store the value of a spec /not/ NULL columns? (It doesn't seem to be COL$)

  I think that it becomes a bit messy depending on order of activity:

  You can see Col. .null$ is set to a non-zero when the desrcibe command displays the column as not null, but it can happen for two reasons:
  (a) user sets the column as not null - in which case you get a line in cdef$ with type # = 7
  (b) the user adds a primary key to table - in which case you get a line in cdef$ with type # = 2

  If you declare null AND add a primary key, you get two lines - that's why it is possible for Oracle to determine if he should remove the flag not null when you remove the primary key and also allows dbms_metadata show the create statement of table without a NOT NULL even when describe it the watch with a NOT NULL - dbms_metadata can respond to the presence of the type # = 2 and absence of the type # = 7.

  Concerning
  Jonathan Lewis

  By the way: by a strange coincidence, it seems to me answering the previous post, three days before it was asked: http://jonathanlewis.wordpress.com/2012/04/19/drop-constraint/#comment-46140 (on the doubts, this isn't - it answers a different question on the removal of constraints).

  Published by: Jonathan Lewis April 23, 2012 11:07

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• LOV in richeTableau resets the value after the deletion of rows from the table

  Hello. I'm on 11g R2

  I have a table with columns in the box and a button in the toolbar that removes the lines checked

  I have build it based on the following article in her string code

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

  
  

  When I run the "delete" button I execute the following code (taken as is article)

  
  

  public void deleteSelectedRows() {}

  create a second line, the value do not affect all lines

  used in ADF

  Set of rows duplicateRowSet = this.createRowSet ("duplicateRowSet");

  first row to avoid "the attempt to access the value of lines."

  exception line was dead.

  duplicateRowSet.first ();

  retrieve the current row of the table for after

  re-running the VO

  Line currentRow = this.getCurrentRow ();

  Boolean currentRowDeleted = false;

  get all rows that have the transoent attribute

  "MarkForDelete' set to true

  Row [] rowsToDelete =

  duplicateRowSet.getFilteredRows ("MarkedForDelete", true);

  If (rowsToDelete.length > 0) {}

  run only throizgh this code, if there is something to

  delete

  for (line rw: rowsToDelete) {}

  If the row is marked as the current in VO, ts value

  Boolean flag

  If (rw.getKey () .equals (currentRow.getKey ())) {}

  currentRowDeleted = true;

  }

  remove the line - do not yet commit

  RW. Remove();

  }

  rerun VO

  this.executeQuery ();

  reset the current line if it has not been removed

  If (! currentRowDeleted) {}

  this.setCurrentRow (currentRow);

  }

  duplicateRowSet.closeRowSet ();

  }

  }

  "MarkedForDelete" is a transient attribute used to mark the line delete

  The lines are removed very well.

  The problem is with lines that I do not delete.

  For example I LOV column. I chose the value LOV in a few lines, and after that choose to delete several lines (not the same lines where I modified the LOV) but some other lines.

  After I click "delete", the lines that I marked to remove deleted indeed, but the value of the LOV in other rows (I have not scored for delete) are disabled.

  How to preserve value LOV so it will remain also after I deleted some lines?

  P.S. I've tried autosubmit = "true" - it did not help

  It is expected because I see that you rerun the query.

  Once you re - run, it retrieves from the database again. Thus, your values are lost because they are not posted.

  I don't think that run query is necessary, try to have a programmatic part trigger on the table after you remove all of the lines.

  Thank you

  Alisson.

• Do not update the values after the registration of form fields

  OK, so I'm building a character auto fill timesheet system using shape. Everything works as expected until I save, close and reload the document.

  I will try to explain the movement of what is supposed to happen, and then it ends by happens.

  Field B is equal to a particular value, depending on what is entered in the field a. field C is equal to the field b. field G totals fields c.-f..

  If I re - write this from scratch, it works as expected, even if I change the to field a different value (thereby changing all other fields to reflect the new data).

  Once I save the document, close and reopen, here's what happens.

  Field B is equal to a particular value, depending on what is entered in the field a. field C is equal to what was the B field before I closed the document. Field total field c.-f. G.

  Can I change A field change and field B to the value it is supposed to. However, field C will not change. Field G still totals the values as expected, including the c. field-stuck now

  Indeed, whatever it is equal to the B field after backup and reload remains at its value prior to the closing. I have a lot of fields equal to B but B alone gets its value based on the field A. I used both "value is the sum of:"and custom JavaScript, both which gives exactly the same results. "

  I use Acrobat Pro (trial) on Windows 7 x 64.

  In format PDF is the order in which the fields are calculated is not automatic, but can be set. If field C depends on the B field and field B is dependent on the land then must ensure that the order of calculation is A-B-C, or the values in calculated fields will be a step behind the value of a field when you update it.

  You can set this command in form editing mode, under the order of computation of Set field - other tasks.

• first column of the Excel report contains the div after export

  Hi all
  When that we export our APEX 3.1 reports it tags div in the workesheet.
  For example, the first cell of the worksheet is populated with < div id = "report_1537300540622601_catch" > "Segment4".
  Does anyone know how to remove or hide these tags?
  Thank you

  The value 'Enable partial Page Refresh' on the 'No' in the report attributes.

• make seekbar contain the value from 1 to 10000

  Hi all

  How can I make a seekbar component contain values between 1 and 1000?

  as there is no standard components for this, you need to implement yourself.

  You can take a look at the field of cursor here first:
  http://supportforums.BlackBerry.com/T5/Java-development/implement-advanced-buttons-fields-and-manage...

• analog output while keeping the value after the program

  I use a USB 6001 output a simple analog voltage. Right now I'm still in the process of experimenting to see how to control my blood pressure when I noticed that, after I complete my program, data acquisition is always show the last analog value.

  My VI is attached. I use the stop and remove commands at the end of the program so I don't understand why he continues to keep the last value. I used a breakpoint, so I know that program happened to stop and clear commands.

  How to exit back to 0 when I close the program, assuming that there is some other way than the writing of 0 at the end of the program.

  I did not find the related items, but if it don't just answer with a link.

  I thank very you much for any assistance.

  Tommy

  The DAQ hardware is supposed to retain the last value so write a 0 before deleting the task is the right method.

• Write PDM, duplicates the value after each race and works very well that if the probe tool is on

  Hi all!

  I am facing a weird problem with my vi. The PDM write in my case/State records "Transformation", the data processed for each channel of each race. However, instead have a different set of data for each race, I get the same set of data for all lines. It is basically just duplication of first series of data in each row of each series. And the strange thing is that if I use the tool to probe on the son will tdms writing in the same case, it records the actual data in respective rows. with probe tool, it looks like good data in and record the correct data, without it, it duplicates only the first line. can someone please understand what going on with her?

  I have attached the VI. While at it, feel free to provide your comments/suggestions on me vi design, so that I can work out which actually better.

  I appreciate all the help in advance!

  Nilesh-

  I thought about it. In case of treatment, I was reading from the same group eaverytime. all data processign was same. All I had to do was get the current value of the Group since the property node and the wire to tdms playback function.

• How can I write a query to siolate the value after the decimal point

  This query

   
  select 
  spraddr_pidm,
  SPRADDR_CITY
   from spraddr 
  where 
   SPRADDR_NATN_CODE = 'CA'
  and SPRADDR_ATYP_CODE = 'AH'

  Returns the following output (just an example I like 1,000 records that I need to fix)
  

  140804     Toronto, Ontario
  140832     Quebec, Quebec
  140845     Halifax, NS
  140889     Mississauga, Ontario
  140902     Boucherville, Quebec
  140945     Westmount, Quebec
  136971     Montreal, Quebec
  180650     Granby, Quebec
  137007     Quispamsis, NB
  137037     Varennes, Quebec
  180746     Port Williams, NS

  As you can see that providence is inserted into the column city (SPRADDR_CITY)
  
  I want to break the column and isolated from providence, so I can insert into a custom table
  the city and providence, so I can fix the files...
  I guess the question is how do I write a query to isolate the providence...
  Thank you

  Hello

  Here's one way:

  WITH     got_comma_pos     AS
  (
       SELECT     spraddr_pidm
       ,     spraddr_city
       ,     INSTR ( spraddr_city || ','
                  , ','
                  )          AS comma_pos
       FROM     spraddr
       WHERE     spraddr_natn_code     = 'CA'
       AND     spraddr_atyp_code     = 'AH'
  )
  SELECT  spraddr_pidm
  ,     SUBSTR (spraddr_city, 1, comma_pos - 1)          AS city
  ,     LTRIM (SUBSTR (spraddr_city, 1 + comma_pos))     AS province
  FROM      got_comma_pos
  ;
  

  What do you do if there is no comma in spraddr_city? The above query assumes that the entire string is the name of the city in this case and the province with a NULL value.

  You can also use regular expressions, but this way is more effective and about as simple to code.