Deploy ESXi 5 with HP P2000 G3

Similar Questions

• Is it legal (and good) to deploy a custom with an installer Vista patch?

  Hello

  First of all, sorry if I'm in the wrong forum. I was quite confused about the place where my question.

  Background

  I work for a software company that deploys a financial application approximately 3000 users. For money transfers, we use a third-party solution.

  This third party uses the Jet DB. The developer of this third solution has recently found a bug that was caused by a known Bug in Windows Vista, which, in turn, has been resolved with Vista SP2. Of course, there is a fix so (KB943509 ).

  To resolve the bug users must be vista sp2 or the hotfix.

  Questions

  1. We thought to deploy this patch with our next installation as a sine qua non. Is this a good idea?
  2. To download the fix, I had to check my installation with wga. If deploy us the patch, this check would not apply to users. This leaves wondering: is - it legal to deploy a patch from microsoft for windows for which users check their installation of windows?

  Thank you and have a nice day

  Kind regards

  Fraghdad

  Hi Fraghdad,
  Thank you for visiting the Microsoft Answers forum.
  I suggest asking your question in the forum TechNet (http://social.technet.microsoft.com/Forums/en-US/category/windowsvistaitpro) that he would be better suited, and there are more experienced people who will give you a better support for your needs.

  Thanks, Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to deploy an application with free files on BES or others?

  I'm curious to know if there is a way to deploy an application with a loose settings file.

  My goal is for customers to deploy the app after that that they have made changes to a settings XML file.

  After the changes to the XML file, the customer could deploy via BES or another method.

  Is this possible?

  I wrote several .net applications that use XML settings files in bulk / external and I want to acoomplish the same thing.

  Tips, advice or ideas are greatly appreciated.

  Thank you

  My current development environment:

  Eclipse 3.4

  BlackBerry JDE plugin for Eclpise 1.0.0.67

  Blackberry JDE 4.2.1.17 component package

  Blackberry JDE 4.3.0.16 component package

  Blackberry JDE 4.5.0.16 component package

  Blackberry JDE 4.6.1.27 component package

  Blackberry JDE 4.7.0.46 component package

  WIndow XP SP 3

  How about using HTTP to GET the XML of your server at startup?

• How to connect to the ESXi shell with domain id

  Hello

  We joined host ESXi 5.0 to active directory. We can open a session of VI client with our domain credentials.
  We want to access ESXi shell with the id of our field.

  Please suggest.

  Hi snjksh,

  Welcome to the fourms.  I think that what you are after is the following:

  User: [email protected]

  Pass: as usual

  Thank you

• SSD for storage of ESXi swap with overcommitment of memory

  Hello

  is - that someone has tried to use SSDS for ESXi swap storage and making the overcommitment of memory?

  Concerning

  check this: http://www.techhead.co.uk/vmware-esxi-vswapping-with-sandforce-ssds it might be interesting...

• a few questions about ESXi and SAN CF with HP P2000 G3

  Hello everyone!

  I am new to ESXi and SAN, then I need help for her.

  I have Encolosure C7000 system with 4 blades BL460c already installed ESXi 5.1U1 (HP custome ISO image). Everything works fine now, but I do not understand something:

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  My devices:

  01 7.1 HP BLc7000 CTO 3 IN LCD ROHS Encl.

  04 BL460c G8 servers HP FlexFabric 8.5 10 Gb 2 p 554FLB FIO blade adapter

  02 7.3 HP B-series 8/12 c BladeSystem SAN Switch

  01 HP P2000 G3 MSA FC Dual Controller

  Thanks for any help, sugession or comment!

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  Yes, it's a separate network used only for traffic management between ESXi hosts and vCenter - it is also the network used to connect to the environment - that's different, then the network used by your virtual machines

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  Yes the license keys can be reused, and if you use vCenter licenses will be managed by vCenter

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  Yes, you will be able to configure the San later - by default, the virtual machine will not see the SAn, as it is virtualized by your ESXi host - all the VM will see is a virtual SCSi disk - this doc's guide to vmware for storage - http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-511-storage-guide.pdf - you can visit the website of HP they might have documentation on configuring P2000 for vSphere -.

• deploy from model with the custom form does not not - NIC becomes disconnected

  [We're using vcenter 5.1 update 2]

  I have created a new model for 2012 Server R2 and I created a specification tailored to go with it. I went to test the deployment of the other day and it seemed that the personalised has not quite finished. He had put the local administrator password and baptized, but he does not join the domain. I finally understood that after the deployment, the NETWORK adapter is not connected despite having me 'connect to light' checked in the model. We are using the VMXNET 3 card.

  I've been messing around with the template for the past 2 days and I am stuck as to why it does not work. I tried the following...

  -checked the windows firewall is disabled (3 options) (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -removed NIC; cleaned up the registry to the HKLM\System\CurrentControlSet\Control\Network\; restarted; readded NIC (it was to eliminate any ghost NICs) (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -Remove vmware tools and reinstall. (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -card network in the operating system, unchecked "allow the computer to turn off to save energy" (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -checked that my new 2012R2 model uses the same host cluster and storage as my 2012 model that works. Also on the same port group distributed. (Essentially, all parameters of vcenter are identical between the two models)

  -also tried disabling the NETWORK card in the model (Windows Server 2012 comments customization)

  I have re-deployed the same server about 10 times and each time after deployment, you can see restart and try starting the customization but it crashes. If I manually turn the NIC on it is completed successfully. The problem is that I don't want to have to do that each time I deploy a server. Why is it disable the NIC and unchecking my option to connect to turn on and how to fix this?

  6.23.2014

  Based on tests (as detailed below):

  5.1 U2 - when patterns of deployment Server R2 2012 using a custom form, the NIC is not on after the deployment despite having ' connect at power on "checked.

  * We use VMXNET 3 and we use vDS

  
  

  Any help is very appreciated!

  -Adam

  Post edited by: atom_acres

  Problem solved: you need to update the hardware VM version from 8 to 9 on the template (also be sure to check "running on check and put vmtools")

  When you create a new virtual machine from scratch in 5.1 U2, he apparently uses VM Hardware version 8 instead of the latest v9. Once I upgraded it, made sure to check the box to have check and tools upgrade vm market, deploying with customization works and the NETWORK adapter is enabled when lit!

• Deployed model = vm with double disk allocated

  I use vSphere 4.1 and ESXi 4.1 with current patches applied.

  After creating a model in the client and then to deploy the virtual machine using said model, I often (not always) find that the virtual machine is configured with almost two times more disk space than the model.

  For example:

  Model is created with 20G thin only HD

  After the deployment of a virtual machine with HD thin I see put into service: 40 G, non-shared: 14G, used storage: 14G (not shared) in the client resources of the interface component.

  What is a cosmetic problem?

  Any ideas if there is a problem and how / if it can be fixed?

  Thank you

  Don

  CSC wrote:

  .... That would most likely cause which would result in this problem?

  This could be very certainly the problem.  It's the first place I'd start.

• How to connect two ESXi hosts with a connection to 1Gbps via ADJUSTABLE and the transfer of files between them?

  Dear community,

  Like many of you, I am facing the problem of executing an effective backup of VMs. unfortunately I can't use standard methods: my servers are rented from the root servers and therefore haver some limits. Their main NIC is connected to the Internet on the speed of 100 MB. It's very slow, if I try to VM backup via this connection images. In addition, backup sessions running through the shared management interface are affecting the production of virtual machine performance.

  To resolve this problem, I ordered an additional network card to each server and asked the data center to connect my themwith a physical link (crossover cable). OK, between my servers 1Gbit link is established, but how do you use now?

  -I can not move the management interface of these cards, because they have no connection to the internet.

  -I can't use among the guest computers because the guest computer is unable to access the files on disk on the host computer.

  So, I've exhausted all my ideas. Maybe someone knows the trick that will let me use 1 GB link between two machines of ESXi to mutually backup disks of virtual machines from one host to another.

  Thanks in advance for your ideas.

  Who is King

  Anton

  Create a vSwitch on each host and set the NETWORK adapter that you will use with the x-over cable.

  Create a portgroup Console of service on each vSwitch and assign it an IP address on the same subnet for each server (router/gateway address does not necessary) for example 192.168.0.1 and 192.168.0.2 on each host.

  Connect the cables between the server network cards.

  You should have a link between two service consoles. I now download and deploy the device of the vMA, on the two hosts for the fault tolerance. Write a script on the VMAs on each host to a-i vmkfstools from one host to another and vice versa.

  If you have virtual machines registered pointing these VMDK on both hosts, then have your scripts remove the VMDK and re - the clone using vmfkstools whenever you back up, you should have a backup solution of rudimentary virtual machine (full copy) in place.

  Now you do not miss the service console?

  Good luck

  Alex

  www.phdvirtual.com

• HP Device Manager - unable to deploy images taken with a particular operating system to another OS

  Hi all

  I tried to deploy an image from a HP T5565 (Thin Client) with the operating system HP ThinPro 4, an HP T5565 with the HP ThinPro 3 operating system. Anyone know if this is possible?

  I am also having the same problem when you deploy an image from a HP T610 - thin thin clent Pro 4, a HP T610 - thin Pro 3 thin client.

  I take the image by right clicking on the client, by clicking on "Send the task", imagery, and then capture Image.

  I deploy images in the same way, but instead select the picture in the Templates window. It works very well for Thin Clients running on the same OS.

  I would be grateful for any assistance with this!

  Kind regards

  Remo

  This is the version of the image I want.

  So bascially your problem is: being ThinPro 3 devices ThinPro 4 different OS, you are not able to find the captured image of ThinPro 4 tab ThinPro 3 OS.

  Two methods for you to Imaging cross OSes.

  1. you have model result to capture the image on your DM console task

  In this case, just click with the right button on the model of result and select "Copy to other OS", it should be ThinPro4 in your case, then you should be able to see and use the model on the ThinPro4 tab.

  2. you have a gold statue want to deploy, but no model of result in the console HPDM.

  1. Locate the gold statue.
  2. DM console, switch to tab ThinPro 3, import the image by clicking on the "Template"-> "Import"-> "Image Files"-> "to deploy without PXE.
  3. Browse the file in step 1, select ThinPro3 as the OS tab and enter a model name.
  4. Wait to build the model on the ThinPro3 tab.
  5. After that these, you can use the model to upgrade unit ThinPro 3 to ThinPro4.

  Just FYI, we strongly recommend to update DM agent before performing all tasks with HPDM.

• Deploy a Lenovo with SCCM and enable Bitlocker during deployment?

  Hello!

  Anyone got information about TPM activation and activate bitlocker during the deployment of the new Lenovo with SCCM?

  Something like that but for Leonovo

  http://www.nullSession.com/2010/12/02/enable-TPM-in-task-sequence-with-SCCM-and-CCTK/

  Thank you, Magnus

  You can automate the secure TPM activation process, please see my post in another thread:

  http://forums.Lenovo.com/T5/ThinkVantage-Technologies/activate-TPM-chipset-and-suppress-F10-at-reboo...

  Any questions, let me know

• deploy the project with Ethercat

  Hi all!

  I need help. I created a project that consists of two parts. The host to run on a Standard PC (HMI display...), that the second part is working on a controller PXI (RT) linked to an Ethercat 9144. I have my project debugging and everything works perfectly, I am able to read variable Ethercat of host, send data to the RT using shared variables...

  To complete my project, I wanted to create an exe for the RT. This is the beginning of my problems. I built the executable, set it as start and deploy the exe to the target. After rebotting target, I started the application on the host... Now, it is impossible to read Ethercat variables and variable shared. If I try to set up the shared variable or the Ethercat for the project, it stops the executable that runs on the target...

  I have not found any documents that describe how to deploy variable Ethercat in an executable... Does anyone have an idea about this problem? any suggestion is welcome...

  When running a windows project, libraries RT SV are usually defined to deploy automatically when the application of the RT is deployed.  Also you can manually deploy libraries SV yourself project.

  Once a SV belonging is deployed on an RT target that it will stay there until eliminated.  You can verify your deployment with Distributed System Manager (DSM) If you see it then you're good.

  Your RT exe cannot deploy its own libraries, they should be deployed in advance.  In addition, you should be able to use the DSM to see the IOV engine on the 9144 chassis analysis even if your RT application is not running.  Check this first.  Also check the on your target RT .alias file to make sure it has the appropriate IP addresses to resolve any URL NSV.

• How to deploy Variables shared with aliases (project Variable), when some machines are offline?

  Hi all

  I have a distributed application (PC + some CompactRIOs). My PC contains the variables having the aliasing enabled - they are related to the variables on the cRIOs.

  Of the cRIOs is currently offline. I am deploying some changes that I made on the side PC. Unfortunately, LabVIEW refuses to deploy libraries to my PC, because it cannot connect to the cRIO-related variables.

  How can I bypass this check and force my PC to update? (I don't see why it is mandatory for the cRIO be online for this :-/))

  Thanks in advance!

  Hi JKSH

  In order to deploy the variable, there must be communication with the binding variable, in this case that the cRIO is not connected nor presented here is not any communication and the deployment fails.

  As a work-around of what we can do is go to the library of the target to the PC while the target RT is not present by doing this, the variable will be in the computer and you can deploy the library PC. Don't forget that we might need to save the project in order to save the movement of the RT to the computer file.

  Kind regards.

  R. Esteban

  

• BlackBerry-deploy - installApp fails with the error - 104

  Hey, I was wondering if someone could help me with this.

  I managed to create my token of debugging and I try to deploy with the following command

  BlackBerry-deploy-installApp-device 169.254.0.5 - package - password

  The result is:

  Info: Send request: install
  Info: Action: install
  Info: File size: 10275227
  Info: installation...
  Info: Treatment 10275227 bytes
  News: Progress 0%...
  News: Advance of 50%...
  News: Advance of 50%...
  News: Progress 100%...
  actual_dname:. testEJDtuDekSj.fZWEJZ1BCQZI
  actual_id:testEJDtuDekSj - fZWEJZ1BCQZI
  actual_version::1.0.408.0
  result::failure-104

  That means "result::failure-104?"
  The only thing I can think is that when I check I have a warning to break but I don't think that should affect what anyone. The warning is

  ([Android.apk] AndroidManifest.xml) native code: x 86: impact = 5

  Thank you

  Hello

  Having native code in your Android application is not supported. The warning of the impact of 5 shows that conversion to apk2bar was not successful, you should not be able to convert your application without removing the native code.

• use different JADs to deploy a COD with different properties

  I've never had different JADs to work for the Web site deployment.

  This is the problem, I use getAppProperty MIDLET to get a property.

  I create a file myMidlet.COD with myMidlet.jad which has a property of the HOST.

  I have ten different JADs with different HOST property on a Web site for

  a myMidlet.COD that will be deployed. The midelt deploys nicely on the Blackberry

  but the HOST is the same as that used to build cod. They gave me a code snippet and

  added some debug statements to see what this thing of Module

  public class mybbProperty {}
  CodeModuleGroup [] allGroups;
  CodeModuleGroup myGroup = null;
  String moduleName;
  Boolean flag = true;

  public void mybbProperty() {}
  }

  public void init() {}
  versForm.debugtext += '\n init';

  AllGroups [CodeModuleGroup] is CodeModuleGroupManager.loadAll ();.
  versForm.debugtext += "\ngroup;
  moduleName = ApplicationDescriptor.currentApplicationDescriptor () .getModuleName ();
  versForm.debugtext mode += "\n" + moduleName;   Note ModuleName is correct and is "myMidlet".

  for (int i = 0; i)< allgroups.length;="" i++)="">
  versForm.debugtext += "\n"+allGroups[i].getFriendlyName ();

  If (allGroups [i] .getFriendlyName () .equals ("myMidlet")) {}
  versForm.debugtext += "\n"+allGroups[i].getFriendlyName ();
  versForm.debugtext += "' \n * found"; "
  for (Enumeration e = allGroups [i] .getModules ();)
  e.hasMoreElements () {}
  versForm.debugtext += "\n *"+ e.nextElement (); "
  }
  myGroup = allGroups [i];
  break;
  }
  for (Enumeration e = allGroups [i] .getModules ();)
  e.hasMoreElements () {}
  versForm.debugtext += "\n *"+ e.nextElement (); "
  //            }

  If (allGroups [i] .containsModule (moduleName)) {}
  myGroup = allGroups [i];
  break;
  }
  }
  versForm.debugtext += "\n end";

  }

  public String getAppProperty (String name) {}
  If (flag)
  init();
  flag = false;
  versForm.debugtext += "\n getAppProp"+ name;
  If (MyGroup is nothing)
  Returns a null value.
  Return myGroup.getProperty (name);
  }
  }

  I use the function mybbProperty.getAppProperty ("AppMyHost");

  I noticed that the getFriendlyName() is the name of my Application, so I use it and

  print information. Did I get this

  mybbProperty mybb = new mybbProperty();

  String s = mybb.getAppProperty ("AppMyHOST");

  myMidlet

  * Found

  * myMidlet-3

  * myMidlet-2

  * myMidlet-1

  of course, which returns null. So how do JAD another properties which was used to deploy the

  App for Blackberry. In Nokia its pretty simple use MIDlet getAppProperty() you need a jad and jar for

  deploy it.

  In any case, I don't know which module to get. The JAD I used to deploy the cod was called green.jad

  so I have no idea why myMidlet is important. I wouldn't see green.jad somewhere?

  Anyway, I would appreciate any code that does this correctly.

  Please see this thread on this issue.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=10&query.ID=5227#...