Deployment of final application with the command line Question

Similar Questions

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• VMWare Player startup with the command line command does not work!

  Hello everyone,

  I'm new to the community and it will probably show. So, I say sorry in advance for the flaws, I'll do. Since I am of German native language I need to translate it into English. So, I could use special terms wrong, but I'll certainly try to avoid this. Just keep in mind. And now my question:

  I was running VMware Player 3.0 with VMware Tools installed and VMware VIX 1.8.0 installed on a host of Win7 Ultimate 64-bit. The Useraccount on the host has administrator rights. Guest operating system is WinXP SP3. Since I need two softwares of different recording/Dictation on my workstation and I could only one of them simultaneously open (which is very uncomfortable, when you need to change frequently), because those two were always challenging who got to use the microphone, I installed a second microphone (that only the application for the two contest) and then created a virtual machine to run the software second with one of the two microphones connected only to the prompt. (Directly/comfortably) to start the second software I created a. LNK shortcut file (and attached to the startmenu) who run the command

  Departure of player "C:\Program Files (x 86) \VMware\VMware" t "C:\Users\USERPROFILE\Eigene virtual Computer\Recorder Windows XP Pro Windows XP Pro SP3.vmx VM SP3\Recorder VM.

  with the recorder VM "VM Windows XP Pro SP3" opening the second software automatically (autostart).

  This worked well, until I updated my VMware Player to 3.0.1. Since the update however, my shortcut file simply is unable to start the virtual machine. However, starting the virtual machine of VMWare Player normal window still works. By running the command mentioned above constitute the command line prompt, I got the information, this vmrun.exe could not connect to the host, due to an error, the specified version is not found, which probably means that the VMware Player.

  P:\ & gt; "" Player t C:\Program Files (x 86) \VMware\VMware VIX\vmrun.exe "start"C:\Use ".

  virtual rs\USERPROFILE\Eigene Computer\Recorder VM Windows XP Pro SP3\Record

  ER VM Windows XP Pro SP3.vmx"

  Unable to connect to the host.

  Error: The specified version is not found

  P:\ & gt;

  I tried the VMware VIX update (from 1.8.0 to 1.8.1) without success. The errormessage even remains.

  The three relevant paths for VMware Player, VMware Vix and the VM are spezified in the systemvariable path as follows:

  % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; "" C:\Program Files (x 86) \VMware\VMware VIX ". "" C:\Program Files (x 86) \VMware\VMware Player. " "' Virtual C:\Users\USERPROFILE\Eigene computer; C:\Program Files (x 86) \QuickTime\QTSystem\

  Today suddenly wrong?

  Any help would be greatly appreciated.

  Thanks in advance to one that solves the Enigma.

  Hello

  Meine VMs starte ICH mit dem VMplayer so:

  vmplayer.exe _

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• with the command line remote reboot

  I know not how to remote shutdown of a pc on our network using the command-line using this...

  Shutdown - r f t 0 - m ComputerName

  But how to do it with my mac to pc?

  Again, you can not. The commands only work with the same OS.

  Yes Mac to Mac, Windows, Windows, etc.

  You will need to find some kind of package of administration remote cross-platform.

• remove the material with the command line

  I have a virtual machine that is powered on and in a cluster and I need to migrade. the vehicle currently has a cdrom installed but I can not change it (the cdrom is grayed out) is there a way to remove these devices from the virtual machine in VC with a command line so I can migrate? (it's really just the cdrom which is holding it up. Oh and the kicker is I can't restart the VM,...

  Hello

  I have no version of ESX 3.0 coming down more, but you can try to do it by using vimsh as follows:

  Connect to the Console on your ESX host and enter as root:

  vimsh
  

  Now to get the ID of your virtual machine in question for help (scroll through using shift page up / page down if you must)

  vmsvc/getallvms
  

  Note the ID of virtual machine, for example, it can be a number like 4400

  Find the key to your VirtualCDrom by querying the hardware devices to your virtual machine.

  vmsvc/device.getdevices 4400
  

  Scroll to the top again and note the key, in my case, it's 3000

  Now, disconnect the CD-ROM device by running:

  vmsvc/device.connection 4400 3000 false
  

  Use true if you want to connect the device.

  Just tested on VMware ESX3.5 and it worked very well there.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Create shortcuts with the command line switches

  I have three versions of Word on my computer. (I know, I'm a masochist).

  There are times when I want to run one of them in safe mode. Those who get me if I run winword.exe /a in the run window let you guess.

  I know I can get it by including all the way, but it's a pain.

  I would like to make a few shortcuts in Windows that would do this for me. However, I don't know how to add the command line switches. I used to be able to properties (similar to editing a .pif file) but it doesn't seem to be an option.

  You * need to locate executable files and create each shortcut via right click on the executable file.  Shortcuts Microsoft Office may not be "real" classical shortcuts

  Right click and change the shortcut.  In the 'Target' box, add at the end command line switch.

  For example... I found the 64-bit Microsoft Office 2010 Word executable here:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  and created a shortcut on my desktop.  The "target", said:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  I added the / a that you pointed at the end, the target is now:

  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» "EXE" /a

  In fact - the after typing all that above, I realized that there is a Microsoft Knowledgebase Article... Google worked and I do not use it.  Heh

  How to use the line switches of start command to start Word 2010, Word 2007, Word 2003, Word 2002, and Word 2000 (Method 2).

• Problem with the command line APEXEXPORT after upgrading to 3.2

  Hello
  
  After the upgrade to 3.1.2 to 3.2 Apex (upgrade went well), I get the following error message when you try to do an export of command-line applications:
  
  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/apex/APEXExport (unsupported major.minor version 49.0)
  at java.lang.ClassLoader.defineClass0 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:55)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:194)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:274)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
  
  Any ideas? It worked perfectly fine before the upgrade... I use Oracle 10.2.0.4 database JDBC jar files.
  
  Thank you
  Matthias Hoys

  Hello

  Machines virtual Java is backward compatible, so you can use the JDBC 1.4 with JVM 1.5 or later without problem, no need to download new classes.

  And Yes, I think that it is best to go directly to JDK1.6... Here I have 1.6 and use the tool to export Apex with the 10g JDBC classes without problems.

  Luis

• import data with the command line switch

  Is it possible to automatically import data to a .pdf file? My idea would be a command line switch, but another way would be appreciated also.

  To explain myself better (my English is bad and I use a non-English version of Adobe Acrobat Reader):

  I use Adobe Acrobat Reader DC and got a PDF with a lot of filelds. Now I can open the 'empty' file and import the data (.xml or .xdp format, I prefer .xml). It works very well.

  I would like to stress that this task "import data" is performed automatically when I run the file - so I think that a command line parameter, but also another (macros?) way would be OK.

  sincerely

  Bruno

  Open the FDF file instead. It must contain a key F name the PDF file.

• problems with the command-line command pc

  on the side of mac, I work from command line. But on the pc side I can't understand this.

  on a mac, this is

  deleteF="rm -r "+myNumPhoto.slice(0,39)+"imaging/*";
        app.system(deleteF);
  

  on the PC I'm trying to do the same thing with this.

  deleteF = "RD/s \\TEST\test".

  It runs the command, but I get the system cannot very well the specified file.

  If I run the slashes on the other hand, it works not at all of the suggestions would be greatly appreciated.

  much of the problem was with all the obliques. They must return the characters. That said I ended up doing a string. Here's what I used.

      myNumPhoto=app.document.presentationPath;
      s=myNumPhoto.slice(0,42)
      s.toString();
      s=s+"imaging";
        deleteF="RD /S /Q "+s;
        addF="MD "+s;
        app.system(deleteF);
        app.system(addF);
  

  I had to delete the folder, and then add it in back on the PC because the command RD except no wildcard characters.

• Oracle 10g convert N column with the command lines.

  SQL > USER to see THE

  VEERA

  SQL > create table test (number n, fname varchar2 (10), the number of age (10), sal number (10));

  Table created.

  SQL > ALTER TABLE TEST ADD CONSTRAINT PK_TEST PRIMARY KEY (N, FNAME, AGE);

  Select

  table_name,

  RTrim (xmlagg (xmlelement (e, column_name |))) ') .extract ('/ / text()'), ',') COLUMN_NAME

  (SELECT ACC. TABLE_NAME, VAC. COLUMN_NAME

  OF ALL_CONSTRAINTS ACN, VAC ALL_CONS_COLUMNS

  WHERE THE VAC. TABLE_NAME = 'TEST '.

  AND ACN. CONSTRAINT_TYPE = 'P '.

  AND ACN. CONSTRAINT_NAME = ACC. CONSTRAINT_NAME

  AND ACN. OWNER = ACC. OWNER

  AND ACN. OWNER = 'VEERA '.

  )

  Table_name group

  /

  TABLE_NAME COLUMN_NAME

  ------------------------------ ----------

  TEST N, AGE, FNAME

  I have need of NAME of COLUMN must be of the order of position_colonne. [N, FNAME, AGE].

  Please tell us how can I get the result. Is this possible using CASE or also DECODE the number of constraints are unknown.

  Kind regards

  Veera.

  Select

  table_name,

  RTrim (xmlagg (xmlelement (e, column_name |))) ') order of position) .extract ('/ / text()'), ',') COLUMN_NAME

  (SELECT ACC. TABLE_NAME, VAC. Column_name, acc.position

  OF ALL_CONSTRAINTS ACN, VAC ALL_CONS_COLUMNS

  WHERE THE VAC. TABLE_NAME = 'TEST '.

  AND ACN. CONSTRAINT_TYPE = 'P '.

  AND ACN. CONSTRAINT_NAME = ACC. CONSTRAINT_NAME

  AND ACN. OWNER = ACC. OWNER

  AND ACN. OWNER = 'VEERA '.

  )

  Table_name group

  /

• Online application with GUI command option

  Dear all,

  I need a command line application that does not open the GUI when you add switches to the command line call. So, when I call my request without any switches, he opens the GUI and I can use it interactively. When I call my application with the command line switches, I don't want to show him anything. It would be as well to integrate the normal output and error output in the console...

  Is there a good way to do this?

  I have seen that you can create a .dll file and write a wrapper calling this .dll in C or C++. It would work for my idea too? (Although I prefer a comprehensive solution of Labview).

  Thank you already!

  Filip Verbinnen.

  Laborelec.

  LabVIEW EXEs need a Start Up VI.  The Start Up VI will show its Panel (regardless of the properties VI) when it runs.  You can run the FP. Open.Hidden method, but you can see a glance since the Panel will open and then close immediately.

  To retrieve the command line arguments, see:

  Help > find examples > tab "Search" > type 'command' > double click on CommandLine.vi

  No way (that I found) to output a value back to the command line.  Compile a DLL of the LV Application Builder project if necessary.

• Start an application saved on the command line

  Hello

  first of all that I do not know how I can start my data .exe on the command line, I know that. I need a few more tips.

  My problem is that I start my program and set values in my interface and then I save my interface. You can say that I am creating some options with different parameters (option 1, option 2, option3). Now, I would like to open this option on the command line. So first of all the program begins with option1 when this option is over that option 2 should start (I will also create a handler of signals which gives me a feedback if the option before closing).

  It should be like this:
  Path\Application.exe option1 option2 option3

  But know that I have a problem. When I save my slab (SavePanelState) I can not open such a Panel is saved with the command "LoadPanel". In help, there is also information that you can load only such a panel with the RecallPanelState command, but with this command you only update the interface. Now my question is, how can I savel a panel with its States and call it with the command LoadPanel? Or is the only way to load a group of experts and to recall the values the command of RecallPanelState?

  Best regards

  Unortunately there is no way to directly open a control panel preconfigured with controls other than in their default state. You have already discovered it and I can confirm that this can not be changed. However, if you call LoadPanel and RecallPanelState front showing the Panel, that the user will directly see the Panel custom, which is more or less what you are looking for.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Is there a problem with Adobe Reader DC using the command line to open a file?

  Hello

  I am a developer and we use Adobe Reader to view our PDF help files in our application.  For years, we used WinExec() to open Adobe Reader, by specifying the file to open on the command line and it has been working perfectly.  In other words, upward until our users began to load Adobe Acrobat Reader DC.  Despite this work very well when you type a command using CMD.exe, it simply does not help WinExec() from another application programmatically.  Also, I modified the code to try using CreateProcess() or ShellExecute() and these functions do not work either.

  It may have to do with the fact that there is a switch or a parameter now within the DC, but I don't know what it is, or why it happens.  If anyone can shed some light on this it would be much appreciated because it severely hampers our latest version of the software.

  Kind regards

  Leigh.

  A common cause is not to put quotes on the command line, so instead of

  "c:\program files...\acrord32.exe" "c:\documents and settings\...my file.pdf.

  You write

  "c:\program files...\acrord32.exe" c:\documents and settings\...my file.PDF

  This has always been bad, but older versions it would accept anyway. (It was a recent change but not in DC).

  I would recommend using ShellExecute instead of the command line, however. That simulates a double-click and executes everything the user has created for PDFs (perhaps Reader, Acrobat maybe, maybe something else).