Graphic errors

Similar Questions

• DV7-1210eo Black Screen with CPU and graphic Error Codes

  I'm running out of ideas on how repair this laptop so I thought I would ask here. Like so many other people with these portable mine seemed to go right after my warranty expires. I went to power on one day and he presented that a directed graph code error with a black screen. Instead of trying to fix the original slide myself I thought it would be best to just replace it. After the new Board of Directors came and I reassembled it all has been great to work for a few days. I went to power on one morning and he presented the same graphics code error as before. I then reset and tried again, but this time that he gave me the CPU error instead, after 15 seconds or later he would begin to switch between error a CPU and graphics. I assumed that the jury who sent was defective, so I sent a replacement. Once the replacement card has been installed it would always give me the same errors, sometimes it would be the graphics and other CPU.

  I was told the jury that I sent worked great and replacement has been tested before it was sent, it even came with the results of the tests to check. I tried to replace the CPU and memory with a work known and same notebook AC adapter, which does not seem to help.

  If anyone has any idea as to what could be the problem I would be acknowledging the entry.

  Thank you

  I want to just update to anyone who seems to have the same problems as me.

  I finally had time to replace the CPU and specifications works fine now. It seems the controller memory on the old CPU came out and was causing memory to not be detected properly and causing graphic errors. Before you spend money on a new motherboard, you may want to consider the processor as the problem.

  Now if only I can figure out how to keep it from cooking itself...

  Thanks for all the help,

  Domo

• Graphical error in photoshop cc 2015 with the help of the Selection tool

  Hello

  for about 2 days, I have a problem with photoshop. As you can see on the capture screen there is something like a graphic error and I could not find any solution for this problem yet.

  I hope someone can help me with this.

  Thanks in advance.

  

  This is a known bug that will be fixed in the next update, which should be out soon. At present, turn off your GPU in preferences or press 'Q' twice to take you to the Quick Mask mode.

• Graphic error 'no graphics appropriate' when playing games

  Why "no suitable graphics" don't pop up would be when using microsoft games? Worked well yesterday

  Hi Steamy4000,

  • You receive this error message when you play integrated windows?
  • Check if there is no yellow bang or error message or listed in next to the Graphics Device Manager error code. To check follow the steps below:

  i. Click Start

  II. in the search box, type in devmgmt.msc

  III. develop the graphics card and double-click the sub element

  With regard to:

  Samhrutha G S - Microsoft technical support.

• The mouse graphic error, impossible to get rid of him, until I restart. Loading screen error, video included.

  OK, so here is the thing. I'm a gamer, I play Everquest right now and Im having problems with my computer 'new '. It was bought used, but when we test tried at home to the owner initial, everything worked perfectly. Since then, my husband has reformatted and put on Windows Vista Buisness on it. After a post on the game forums, Kevin helped me to get the PC to stop locking up. Yet, I still have the other problem with the mouse pointer.

  First thing first: computer information!
  Edition of Windows: Windows Vista Business Service Pack 2
  System:
  -Processor: AMD Athlon (TM) 64 X 2 Dual Core Processor 5000 + 2.61 GHz
  -RAM memory (RAM) 3.00 GB
  -System type: 32-bit operating system
  Graphics card: Radeon HD 4850
  Motherboard: nForce 590 SLI

  Next: I am 100% positive that there is no update pending for the operating system. There are things in option that I can install it, but they are not relevant to the problem that I currently have.

  So here's the question:

  (1) for the loading of Windows Vista Business. I see the text channel 0 Slave and in the lower right of my two monitors, both monitors so it is important, there is a rectangle that is 1/2 at the bottom of the screen.
  I included a video of him: [URL = http://tinypic.com/r/jhae14/5] View My video [url]
  (2) sometimes when the games, I see a square box that resembles film developed that appears randomly on the screen.
  Note: I only see the error all in game, because when the PC is on that's what I do. Here is the screenshot [IMG] [line] http://i44.tinypic.com/2evqekg.jpg
  (3) I have experience this behavior in and out of the game, but the screenshots in EQ are easier and faster to make and Vista does not see the problematic mouse pointer when you take a screenshot of it. Sometimes I will be able to tab in and out of what I do and it will go away, othertimes it requires a complete closed system and then it will go away. Here is the screenshot: [IMG] [line] http://i43.tinypic.com/qqswtx.jpg With the image that I just linked, there are three examples of the problem. The upper left corner has the double serrated edge, the other two posted on a character's head to make it easier to see. (Not sure if the 2nd link works or not. List of URL to Tinypic to show errors: http://tinypic.com/r/qqswtx/5)

  These problems don't always cause me down, but there are moments where I feel this graphic glitch, so the computer has locked up. It's incredibly less frequent that another EQ crashing the computer problem, I had. He posted the question here, happens once or twice every two days, when it isn't something I can deal. In the 2nd picture the edge serrated turning into that, you can always click in the right place. One would think that you would use just the tip to click on something, but sometimes this does not work and must continue to go upward or downward a bit to get to what you were tryin to close / open / whatever.

  Thank you for your time!

  Hello Dewifey,

  Thank you for posting.  I checked the other thread just so that I would have a complete understanding of the problem.  I studied him this strongly and I came up with some possible solutions for you.  As seems to be more than a gliche graph, I will propose common fixes first.  The first is to check the site ati.amd.com for updated for your video card drivers.  The second is to check for updates or patches for the game Everquest game.  Now we can get right to my search results.

  The only problem with EQ is really changes to security of XP to Vista.  EQ always assumes that users will run as administrator with full access to all under the directory %ProgramFiles%.  In Vista, even if logged in as an administrator, you don't actually run as administrator.  You must explicitly elevate your rights before becoming administrator (such as right click, run as administrator, or configure the program to run as administrator).  Just put the game to run in compatibility mode for Windows XP Service Pack 2 and run in administrator mode.
  If you forget to do this, the patch cannot connect records and will be silently _ it's short films before leaving.

  This step applies only if you run the game in windowed mode.

  One way to expedite EQ in Vista is to click right on eqgame.exe and on one of the tabs that you can disable "desktop composition" that disables the interface Aero and stop the GUI running on your video card.

  Please let me know if this helps you.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• WOW/graphics error "display driver nvlddmkm stopped responding and was retrieved successfully."

  Help, please. On the next computer I have terrible crash problems while playing WoW. Critical error WOW States: "not enough memory to process command - 11 538 bytes requested."

  When running 3D Mark Vantage I can reproduce the "display driver nvlddmkm stopped responding and was recovered successfully.

  Processor Intel Core i7 CPU 920 @ 2.67GHz
  Details of the component
  NVIDIA GeForce GTX 295 graphics
  4 095 MB total graphics memory available graphic set
  Main hard drive 53GB free (140 GB Total)
  64 bit version with service PAC 2 Vista Ultamate

  Forums are full of posters indicating that it is a Vista / Nvidea incompatibility problem that has been around for years and that the problem is not treated. I tried everything I can think of, check the RAM to download new drivers, to the removal of unnecessary records of WOW. I reinstalled everything, run each diagnostic tool in the plane, patches downloaded, checked for the virus and still no help.

  I am currently able to play WOW on the smaller graphics settings and avoid cities. With this level of equipment, it's a shame, really, I should be able to do more.

  Did anyone have any suggestions of what I can do at this point?

  OK, I did a lot of research on this issue.  The problem lies in the Blizzard, most of the time.

  World of Warcraft is a set of 32 bits.  Because it is strictly 32 bit, it only has access to 2 gigabytes of memory.  Windows manages the other 2 giga of addressable space.

  Most of the developers of games flag their games before the compile time to use larger amounts of memory.  Blizzard doesn't do this, because their anti-cheat system and third-party tools rely on the 32-bit addressing and address 64-bit would mean that they must all be rewritten.

  What happens in the game, is that your footprint large capacity memory card is mapped in the game.  In general, it is when your settings are high, because it uses the most memory, which explains why the game is playable when you use minimal settings.  Given that the configuration of your particular graphics card uses close to 2 gig of RAM itself, quickly force you the game short of memory addressable space.

  To resolve this problem, you may be able to play with reduced settings.  Reduce your resolution is usually the best way to limit the use of memory, since it increases exponential use RAM when you increase the resolution.  You might have to play with different parameters.  You can open the upward Task Manager and monitor the use of your memory WoW game to see where the sweet spot is maintaining your memory under control.

  Blizzard will have to make the difficult choice to eventually allow access extended memory.  More people are buying equipment like yours, this problem will be more widespread.

• new javax.microedition.lcdui.Graphics () error (not public are accessible)

  Hey. Just do some drawing and had a compilation error

  Graphics is not public in javax.microedition.lcdui.Graphics; are not accessible from the outer packaging

  javax.microedition.lcdui.Graphics gr = new javax.microedition.lcdui.Graphics ();   //

  gr.drawRect (100,50,200,100);

  In the online JDE 4.7 QAnywhere, the class is public not private. There's no docs for the Builder. I have tried providing an arg but no dice. I use this class of lcdui because other graphics can't shoot a picture object.

  Ideas appreciated, has soon

  J

  Hey-learned that the only way to get an instance of the javax.microedition.lcdui.Graphics object is to use

  myGraphics = javax.microedition.lcdui.Image.getGraphics)

  So that's it.

  JD

• Graphics error after latest update

  Windows 8.1 970 GTX graphics card. I get an error message:

  "Illustrator has detected an error with your material or graphics processing software and went to the preview of the CPU."

  After the most recent Illustrator happned updated 18/07/15

  has worked well before.

  so boring.

  Hello

  I'm the technical team of the Illustrator.

  Starting 19.0.1 we implemented a back drop in CPU errors of OpenGL. There are various reasons why an OpenGL errors may arise from issues implemented in Illustrator, bug in the drivers, the lack of memory in the GPU to render the content, an error of computation on the GPU or even a bug in the OS etc...

  The reason why we have implemented a back fall with 19.0.1 is to prevent undesirable rendering problems when these errors occur. Please click on does not show them the check box and continue to work on Illustrator. Illustrator turn off automatically the GPU acceleration momentarily when it detects an error. This momentary exit ramp is applicable only for the current session. The next time you start Illustrator, we will try to reuse the GPU.

  With Apple and Microsoft we also work with different hardware vendors such as NVIDIA, AMD, and Intel is to get these issues resolved or to implement workaround in our own product.

  If you get a fallback error please let us know of your file by email at [email protected] . Please reference this thread in your communication. Get us this investigation and see how these situations can be handled better.

  Thank you.

  Kind regards

  Ashutosh chikh

• Graphic error 4.2 APEX

  I get the error message:

  "XML this file does not appear to be any information of style associated with it." "The document tree is shown below."

  I have the return sql query function that works on another page normally, do not know what what does this error message mean.

  I do not use the XML custom options.

  This XML file does not appear to have any information of style associated with it. The document tree is shown below.

  < anychart >

  < Parameters >

  "< animation enabled="false"/ >"

  "< no_data show_waiting_animation="False">"

  < label > < text > No data found. < / text >

  "" < police family= "Verdana" "BOLD" "="Yes" size="10"/ >"

  < / label >

  < / no_data >

  < / Parameter >

  <margin left="0" top="0" right="0" bottom="0"/>

  < graphics >

  "< chart plot_type="CategorizedVertical"' name="chart_11260125326414148">

  < chart_settings >

  "< title enabled="False"/ >"

  < chart_background > "" < filling type= "solid" ' color= "0xffffff" Opacity= "0"/ > "

  "< border enabled="false"/ >"

  "< corners type="Square"/ >"

  < / chart_background >

  < data_plot_background > < / data_plot_background >

  < axes >

  < y_axis >

  "< scale mode="Normal"/ >"

  "< title enabled="false"/ >"

  "< labels enabled="true"' position="Outside">

  "" "< police family="Tahoma"' size="10" color="0x000000"/ >

  <>format

  <! [CDATA]

  {Value %} {numDecimals:0, decimalSeparator:., thousandsSeparator:------,}

  []] >

  < / size >

  < / Label >

  "< major_grid enabled="False"/ >"

  "< minor_grid enabled="False"/ >"

  < / y_axis >

  < x_axis >

  "< scale mode="Normal"/ >"

  "< title enabled="false"/ >"

  "< labels enabled="true"' position="Outside">

  "" "< police family="Tahoma"' size="10" color="0x000000"/ >

  <>format

  <! [CDATA]

  {Value %} {numDecimals:0, decimalSeparator:., thousandsSeparator:------,}

  []] >

  < / size >

  < / Label >

  "< major_grid enabled="False"/ >"

  "< minor_grid enabled="False"/ >"

  < / x_axis >

  < / axis >

  < / chart_settings >

  "< data_plot_settings enable_3d_mode="false">"

  "< bar_series style="default">"

  "< tooltip_settings enabled="true">"

  <>format

  <! [CDATA]

  {% Name} {enabled: False}-{value %} {numDecimals:0, decimalSeparator:., thousandsSeparator:------,}

  []] >

  < / size >

  "" "< police family="Tahoma"' size="10" color="0x000000"/ >

  "" < position anchor= "float" " valign="Top" padding="10"/ >"

  < / tooltip_settings >

  "" < label_settings enabled= "true" ' mode= "Outside" multi_line_align= "Center"> "

  <>format

  <! [CDATA]

  {Value %} {numDecimals:0, decimalSeparator:., thousandsSeparator:------,}

  []] >

  < / size >

  "< background enabled="false"/ >"

  "" "< police family="Tahoma"' size="10" color="0x000000"/ >

  < / label_settings >

  < bar_style > < / bar_style >

  "< marker_settings enabled="True"'>< marker type="None"/ >

  < / marker_settings >

  < / bar_series >

  < line_series >

  "< tooltip_settings enabled="true">"

  <>format

  <! [CDATA]

  {% Name} {enabled: False}-{value %} {numDecimals:0, decimalSeparator:., thousandsSeparator:------,}

  []] >

  < / size >

  "" "< police family="Tahoma"' size="10" color="0x000000"/ >

  "" < position anchor= "float" " valign="Top" padding="10"/ >"

  < / tooltip_settings >

  "" < label_settings enabled= "true" ' mode= "Outside" multi_line_align= "Center"> "

  <>format

  <! [CDATA]

  {Value %} {numDecimals:0, decimalSeparator:., thousandsSeparator:------,}

  []] >

  < / size >

  "< background enabled="false"/ >"

  "" "< police family="Tahoma"' size="10" color="0x000000"/ >

  < / label_settings >

  < line_style > "" < line enabled= "true" ' thickness= "1" Opacity= "1"/ > "

  < / line_style >

  "< marker_settings enabled="True"'>< marker type="Circle"/ >

  < / marker_settings >

  < / line_series >

  < / data_plot_settings >

  < / chart >

  < / charts >

  < / anychart >

  
  

  
  

  
  

  Hello

  What is the complete XML code for your chart?  If Yes, then it seems to contain no data, then you may need to review the graphic source to ensure that the function returns a query that uses the correct syntax for the selected chart type.  You can see 10.4 creating tables for more information on the required syntax.  If you think that the function behaves correctly, so it would be running your graphics page with Debug set to Yes and look at the debug information for all the reported errors.

  Kind regards

  Hilary

• 23 - g010 HP Pavilion all-in-One: Minecraft cannot load due to a graphic error?

  Hello, I was alerted by my son as his Minecraft won't load, he said it was because of the Pixels is not accelerated, and after a lot of research to try to resolve this error, nothing happened. I tried to download the latest version of the AMD driver, as suggested by the Minecraft IRC.

  I need help to solve this problem.

  Any help would be appreciated.

  @whazzupman33

  Please read the messages from redscarlett to see how it solves the problem that you are experiencing.  I hope this helps you.

• WPF graphics error: can't shoot outside a cycle of draw

  I get this error in my wpf with Measurement Studio 2013 application. After much headache, I realized this error only occurs if I add intrigue to the curve of this. Dispatcher.Invoke method of my background but work if I moved adding parcels to my main thread (RunWorkerCompleted code) I get this error again. I know that this error has been reported here before and this has been attributed to not having the most recent Measurement Studio library but I use the latest library. But I need to move this back to the background work because the addition of the plot in the main thread is blocking my UI. Thank you.

  I was able to reproduce the error with your project. The problem is with the implementation of the Auto mode able Studio 2013, where args made set caching using the old target were get called once the goal has been selected rendering.

  To avoid this, set RenderMode or Vector or Raster in the ulGraph.xaml file.

• Crash of Vista, graphic error, green lines and broken at the start lines.

  OK, maybe complicated I don't know.

  Occasional at startup, my screen will be covered in white or green lines and will prevent windows to start so I have to manually turn my pc and turn it on again.

  At first, it was just a problem visually but now its my PC randomly crash. The dotted green line will suddenly appear all over screen of, freeze my PC and I have to restart again.

  It's random, it is not the case whenever I turn on the PC but when it does it is a pain.

  Any information you can give me would be great

  Here is a picture to help identify what I will speak about.

  http://uploadpic.org/view-PIC.php?IMG=93670

  See you soon

  Hello, daz18

  This seems to be either a driver, or more likely a hardware problem. Errors that distort the screen you describe is extremely rare with only software.

  Check with the manufacturer and make sure that you have the latest video drivers for your computer.

  Try to run the memory diagnostics tool: click Start, type memory in the search box and open the Diagnostic tool memory and choose whether you want to restart now or later. After the restart of the tool must be running and then windows starts to tell whether or not it finds problems.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought PS/LR &amp; I get a graphic error message?

  PS says features 3D and some filters (flames/tree/Picture Frame) require a minimum of 512 MB of vRAM. PS has detected less than on your system.

  Update your graphics card driver may solve the problem - I work with a MBP OS X Yosemite version 10.10.5 graphics Intel HD Graphics 288 MB

  What should I do?

  @

  What should I do?

  Buy a Mac better? System requirements are minimum requirements, not optional. These features will never work on your current Mac.

  Mylenium

• Reports REP-34551-Graphics error

  We are the upgrade for R12 11.5.9.When reports migration with graphics (developed on reports 6i), he said: "" REP-34551: Oracle Graphics Graphics: is obsolete. ' "
  We tried the action posted in ID 471197.1 but nothing works.
  
  Please suggest.
  
  Thank you and best regards,
  Praveen

  Hello
  Make sure that you apply the last group of patches Developer 6i before the test. If you see this pop-up message in report designer that is expected.
  This is to provide a reminder that "you use a feature of the old version which is frowned upon in the current version of the report generator." It is a message construction and there is no configuration to pass.

  It is recommended that you migrate the old graphic 6i to the new graphic format.
  Reference
  http://www.Oracle.com/technetwork/middleware/reports/graph-FAQ-with-style-094084.html#Q101

  Best regards, RZ

• The webcam on my Satellite A210 - graphic error make fail

  I just bought a laptop Toshiba Satellite A210. I have everything installed and working properly, except the built-in webcam. Webcam Viewer says "rendering failed" when you try to turn on the webcam and MSN does not recognize that I have even a webcam on or plugged into the computer.

  Am I missing something?
  Do I need to activate it somewhere?

  Thank you.

  Reboot the laptop and try to start the webcam software. You can use the webcam again?