Deployment of new instance B2B adapter

Similar Questions

• Create the new instance to a diferent project

  Im trying to create a new instance in a project, I use an interactive global activity to do this, when trying to create the reception that this message in the BPM 'JavaLangNullPointerException', the global comprehensive interactive activity log is in a different project that I want to create the instance.

  This is the code I used in BPM

  args ['argPrueba'] = 1234

  Result2 = ProcessInstance.create (processId: "/ Test", arguments: args, argumentsSetName: "BeginIn")

  in the other project, I configure the beginIn of this way activity:

  idPrueba = argPrueba

  I used BPM 10g

  If you cannot create instances of processes in the same project, you need to double check your logic.

  1. check that 'args' is an array of associative strings (Any [String]).  Believe that the default value to a variable called "argsIn" (you have "args" in your logic).

  This means that Begin activity has two variables of the arguments
  named 'nameArg' and 'amountArg' and you're implementation in
  for variables 'name' and 'amount' respectively
  argsIn ['someArgVarName'] = 'Hello '.
  argsIn ['someBpmObject'] = myBpmObject

  2. check your other settings in logic.

  Instance.Create (processId: "/" + idOfProcess, arguments: argsIn, argumentsSetName: "BeginIn")

  The processId parameter is the thing I most often used to screw up with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

  The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

  "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

  . . .
  This will * NOT * work
  argsIn [someArgVarName] = 'Hello '.
  argsIn [someBpmObject] = myBpmObject
  . . .

  Here is the correct syntax:

  . . .
  This * WILL * work
  argsIn ['someArgVarName'] = 'Hello '.
  argsIn ['someBpmObject'] = myBpmObject
  . . .

  In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way.  In this example, there is an incoming string argument, called "someArgVarName" and an argument entering BPM object called "someBpmObject".

  Dan

• creating a new instance of database - how to choose UTF-8 enconding?

  Hello again,
  
  How can I set the UTF-8 encoding for the new instance of the database?
  
  
  concerning

  Simply specify in the CREATE DATABASE statement:

  CHARACTER SET AL32UTF8
  

  Oracle recommends using AL32UTF8 instead of UTF8.
  Chapter 2 of the Guide to globalization:

  >
  At the top of the list of character sets that oracle recommends to all new system deployment is the AL32UTF8 defined Unicode character.
  >

  Note that the character set is a property of the database (because it defines the storage of characters) and not an instance property.

  Edited by: P. Forstmann on October 6, 2009 10:22

• Cannot create a new instance in Hyperion Conf Utility

  Hello
  I installed 9.3.1 on XP Prof. planning everything is configured correctly, with the exception of the instance. I'm trying to create a new instance and system gives the following-
  "System failure: Error retrieving the xml database.
  
  I have re-installed and configured planning triple check that the error is not on the side of the installation.
  Guru, please provide your ideas on this. If the instance is created, I can start working on applications...
  
  Thanks for your time,
  Varma.

  Hello

  It should not question it is null, because an instance has not been created yet, although she always does try and access the table to see if there is something in the xml_field, the problem seems to be to try to access to this.

  Is it possible, you can raise through the planning on the windows 2003 installation configuration, one step at a time in the following order.

  Unregister the SSP.

  Product options

  Register with Shared Services

  Configure the database (when prompted, choose Remove all tables and create a new database)

  Deploy to the application server

  Instance of product registration

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Satellite A40 - need new AC/DC adapter

  Hello

  I want to know the features of the Toshiba laptop AC/DC power adapter, I loss my original adapter and I want to buy another compatible adapter but I don't know the particular feature of the Satellite A40 power adapter.

  help me, and forgive me my Engles

  Hello

  You can search on the Toshiba site compatible AC adapters. Did you check that?

  Alternative, I recommend that you contact an authorized service provider. Here, you can order a new AC/DC adapter and they know which AC/DC adapter is needed for Satellite A40 laptop. :)

• TestStand step to call a new instance of Teststand environment

  I am trying to create a troubleshooting step and I would that this step to be able to open a new instance of the testbed environment. I if the troubleshooting step is encountered, the current sequence to stop running, open a new test sequence that will allow the engineer perform a parallel TestStand window troubleshooting steps and troubleshooting testbed environment close to return to the calling sequence.

  Hello Daniel,.

  I think your best bet would be to have just the steps break if an error occurs if you can help then go in TestStand. If you open a new instance of TestStand, you won't be really able to troubleshoot the sequence you just ran, it will be troubleshooting a new sequence.

  Best regards

  Adam G

• PeopleSoft tide Job: Run new instance vs run again same instance

  Hi all

  I am using tide 6.0.3 and planning of a PeopleSoft application work.  What is the difference with "Run new instance" and "replay even Occurrence."

  These choices also applied to the instance of PSQuery, where it will be re - run the PSQuery if you choose "Run new instance" in the tide Planner?

  Thanks in advance

  Jeff

  This answer is not specific to the PS...

  The new instance creates a new instance of the task that you ran. For example, if your job id tide was 100, the new occurrnece would be 101. You will see two entries in the history of execution.

  where as

  Occurrence of re-launch simply reruns the same work and retains the same tide job id. In this example, it would be 100. himself. You will see that only one instance in the task run history. The output of the tasks in the SEV also gets crushed.

  In both cases, backend action is generally the same (repetition of the query). I guess the same thing for the PS jobs as well

• How to refresh a screen without making a new Instance of the class

  Hi all

  Please help me.

  I need to refresh a screen of components such as the text box, list etc without (pushing the new instance of the class) using the old instance.

  I use:

  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}

  public void run() {}

  invalidate ();

  }

  But it will not refresh the screen components.

  I need to change the label of the text box, choice of etc group on click on the Refresh button.

  Please suggest me

  Thank you

  Again, I agree with BBDeveloper, just wanted to add an alternative solution.  You must have the code that sets the values in those fields anyway.  You can separate the code that adds the fields to the screen of the code which sets the values in these fields, place the code that sets the fields into a separate routine and call this routine to during the construction of the screen and the screen refresh.

• Deploy a new 5508 as a secondary WLC in network

  Hi friends,

  I am really poor deployed WLC.

  I need to deploy a new WLC 5508 networked as a secondary controller. The primary WLC (5508) has been configured as a single from now and good work WLC... Now, I need deploy the new 5508 as secondary controller.

  I could connect to the console and make the basic configs. (Service and management int IP interface addresses etc)

  Now, I have to perform two tasks:

  (1) I should synchronize the configuration of the primary 5508 for 5508 high school which I just added. Please guide me how do?

  (2) I need to set up the HA (failover) using the RP or giving the Pri/Sec/Ter static by AP.

  Please help me ASAP as I am not very used to WLC deployments.

  Thank you

  Francis

  Hello

  1. It is a model of HA - SKU (secondary) license?
  2. Or do you have at least 50 AP secondary license to WLC?

  If you have any of the above then go through this guide:

  http://networkguy.de/?p=558

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/TechNotes/7-5/H...

  Concerning

  Remember messages useful rates

• Whenever I select Facebook tile, it opens a new instance of Facebook.

  Original title: tile from Facebook

  I added a tile for Facebook, but whenever I select, it opens a new instance of Facebook. Is there a way to change the settings so it opens to the instance that is already running the tile?

  Hey Debbie in 21401.

  This is normal. If you have opened an instance of Facebook in the modern user, Internet Explorer interface and try to open Facebook tile, it will also change the settings in IE and change the previous settings.

  Hope this information helps.

• The behavior of business rule when you deploy a new version

  Hi Experts,

  My client is using bpm11g, they asked when you deploy a new version of bpmn process with build-in the business rule, what will happen to the existing and update of the composer?

  The old rule will be updated with the new version or will be preserved as it was? If the latter is true, when the new version will be effective?

  Best regards

  Hello

  What has to happen, is it time that you changed a BR in the composer, that a redeployment of the composite does not replace the amended administrative rules.

  You can / should export your composite of EM then you JDeveloper project reflecting changes in the BR in composer: using Oracle SOA composer with Oracle Business Rules - 11 g Release 1 (11.1.1.6.1).

  Kind regards
  Martian

• IOM 11.1.2.2 - new instance of the application is not visible in the catalogue

  Hi all

  I installed the Oracle Fusion Middleware Identity Management 11g R2 Media Pack v8 - 11.1.2.2...  When I created the new instance of the application, I don't see this case in the catalog. I found a similar question in the Metalink (Doc ID 1624482.1), but a workaround described it does not work for me. Workaround does not work for me is: the value "Update Date" in 'Task catalog synchronization' last value and run the job again.

  In the version 11.1.2.1 it woks fine.

  Please, can someone help me solve this problem?

  Thank you.

  Milan

  Hi all

  my colleague and I, we found a solution.

  Looks like the Sun Java System Directory Connector is not supported in the version 11.1.2.2 IOM or the bug is there. I thing it's a bug! IOM 11.1.2.2 uses more SQL select / insert when catalog synchronization task.

  INSERT INTO CATALOG (CATALOG_ID, ENTITY_TYPE, CATEGORY, CATALOG_CREATEBY, CATALOG_UPDATEBY,

  ENTITY_KEY, ENTITY_NAME, ENTITY_DISPLAY_NAME, ENTITY_DESCRIPTION, PARENT_ENTITY_TYPE, PARENT_ENTITY_KEY, IS_DELETED,

  TAGS, CERTIFIABLE, ITEM_RISK, RISK_UPDATE_DATE)

  SELECT - CATALOG_SEQ. NEXTVAL,

  "ApplicationInstance', 'ApplicationInstance', 4, 4,

  APP_INSTANCE_KEY, APP_INSTANCE_NAME, APP_INSTANCE_DISPLAY_NAME, APP_INSTANCE_DESCRIPTION, nvl2(APP_INSTANCE_PARENT_KEY,'ApplicationInstance',null), APP_INSTANCE_PARENT_KEY, APP_INSTANCE_IS_SOFT_DELETE,

  APP_INSTANCE_NAME | ' ' || APP_INSTANCE_TYPE | ' ' || APP_INSTANCE_DISPLAY_NAME | ' ' || SVR. SVR_NAME | ' ' || OBJ. OBJ_NAME, 1, 3, sysdate

  OF APP_INSTANCE, OBJ, SVR

  WHERE THERE is NO 1 = 1-(SELECT 1 OF THE CATALOGUE WHERE ENTITY_TYPE = "ApplicationInstance" AND CATALOG. ENTITY_KEY = APP_INSTANCE. APP_INSTANCE_KEY)

  AND APP_INSTANCE. ITRESOURCE_KEY = SVR. SVR_KEY

  AND APP_INSTANCE. OBJECT_KEY = OBJ. OBJ_KEY AND OBJ. OBJ_TRUSTED_SOURCE = '0' AND APP_INSTANCE_KEY =: 1

  The problem is that the object (object type?) of the connector SJSD has the value OBJ_TRUSTED_SOURCE in the table OBJ is NULL but query catalog synchronization expected value 0 or 1.

  And the solution?

  The value of 0 OBJ_TRUSTED_SOURCE. Example: update obj_trusted_source set obj is '0' where obj_key = 5;.

  But we found that supported Oracle Internet Directory 11.1.1.6.0 multiple LDAP servers such as eDirectory or Oracle Directory Server Enterprise Edition. Then I abolished SJSD connector and its application instance and installed OID connector

• Add new instances to the top of the bottom of the list (table or group) vs

  Is it possible to add new instances (i.e. of a table row, or a subgroup) to the "top" of the bottom vs list? New instances are usually added at the bottom of the group, but I have a case in which I am trying to insert new instances of more recent story of Job, so have the instances added at the top of the list is more advantageous.

  Please advise and thanks in advance!

  Hello

  to add an instance on the top use the menthod of insertInstance() instead of addInstance().

  Table1._Row.insertInstance(0, true);
  

• process of the App "on the new instance" exact point of execution

  Hello, I have an application process that aims to define a bunch of elements of the application at the start of the session.

  II developing used authentication 'door open' and everything worked as expected.

  As I went to LDAP, it seems that the process is called even from the login page (101),

  even if it is meaningless at this stage since no user identity is established.

  Open door seems to ignore the page 101 with its own simplified login (user name) dialog box.

  where my approach is not called (but it is called a little later because the parameters are resolved

  at the time when the application needs make his first login page after).

  What is the recommended method for the initialization to happen only once.

  but only after authentication successful?

  Application of processes & calculations occur before a user is authenticated.

  Try this: set up a simple application with two elements of the Application.  Set a single item on new Instance in him: APP_USER and others before heading to: APP_USER.  Then, on Page 1 of your application, print these two points.  You should see that the point on the new Instance is set to nobody (that is, the user has not yet been authenticated) and the header before one is defined for the user that you just connected to.

  It's a bit counterintuitive, as you mentioned, but this is workaround that I've used for a while and I had no problem with it.

  Thank you

  -Scott-

  http://spendolini.blogspot.com

  http://www.enkitec.com

• Restoring a backup RMAN to a new instance of the database

  Hi guys,.

  I have a problem with restoring a backup RMAN I have with me a new instance of the database. I have with me are:

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2. backup of the control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  3. the full backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_. BKP)

  I received these files to a client environment and I need to restore these to a new instance of the database on a local computer. I gave an attempt as follows (in Oracle 10 g):

  1, creates a new instance of the (Test75) database using the Oracle Database Configuration Assistant

  2 SET ORACLE_SID = Test75

  3 connection to this instance with RMAN

  4 tried to restore the SPFILE from the BKP file received.

  
  

  I make mistakes and cannot continue. I don't know if I will carry out the correct steps. Please help me telling me how I should achieve this goal.

  
  

  Thank you.
  

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2 backup of control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  The first backuppiece resembles a ControlFile and the other looks like a SPFILE'

  > I get error and cannot continue

  What is the error?  (I assume that you have tried to restore the O1_MF_NNSNF_SPFILE_BU_92DVGW9H_ SPFILE. BKP

  Note that you must also SET the DBID before restoring the controlfile

  Hemant K Collette