Deployment on another Partition

Similar Questions

• Bootcamp partition bootable no more after the addition of another partition

  Until a few days ago that my Bootcamp and OSX worked very well together. When I did my Win10 partition I created it with 64 GB of space. After a while the hard drive became too small, so I decided to add more space to him. The method that I was about to use is: create another partition 64, go to windows, mix two partitions with windows software.

  After you have created the partition, I couldn't open Windows more. First he gave me the infamous "no bootable disc not found" - error and later the Bootcamp partition went in the menu selection that start with alt down. I tried several methods, I saw on the internet, but somehow I can not use the command "write" with fdisk, it gives me this error: "fdisk: / dev/disk0: operation not permitted".

  Another mistake I met is: "fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory" when you use the command "sudo fdisk e/dev/disk0. I tried this method (the solved by one): repair Boot Camp after having created the new partition and also some methods more I found on the internet, including some methods gdisk. They seem to all fail because the operation is not allowed when using "write".

  A few commands:

  sudo fdisk e/dev/disk0

  Fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory Type 'help' for more information Fdisk: 1 > p Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors] Offset: 0 Signature: 0xAA55 From end #: cyl hd s - cyl hd s id [Start - size] ------------------------------------------------------------------------ 1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID > 2: AC 1023 254 63 - 1023 254 63 [409640-724832120] < unknown ID > 3: AB 1023 254 63 - 1023 254 63 Boot Darwin [725241760-1269536] 04:07 1023 254 63-1023 254 63 [726511296-125000000] HPFS/QNX / TO THE

  diskutil list

  / dev/disk0 (internal, physical): #: NAME SIZE TYPE IDENTIFIER 0: GUID_partition_scheme * GB 500,1 disk0 1: disk0s1 EFI EFI 209.7 MB 2: Apple_CoreStorage Macintosh HD 371,1 GB disk0s2 3: disk0s3 Apple_Boot Recovery 650.0 MB HD 4: Microsoft data base ADDTOWIN 64.0 GB disk0s4 5: Microsoft database BOOTCAMP 64.0 GB disk0s5 / dev/disk1 (internal, virtual): #: NAME SIZE TYPE IDENTIFIER 0: Apple_HFS Macintosh HD GB + 370.7 disk1 Logical volume on disk0s2 3CD4F288-11BC-4701-A05D-4ECF1DF6F9DD Unlocked encrypted

  Thank you in advance.

  El Capitan requires SIP should be disabled in the local food only, otherwise these operations fail. You cannot use Fdisk to correct this problem. You need GPT Fdisk (Gdisk) to rebuild the MBR hybrid. Please see Re: [help] can't start Windows (8.1) after resizing partition for example.

• Can I copy the recovery files to another partition D?

  Hello

  My drive came with C and D partitions, but I want to organize my partitions of different drive from the factory.
  I want to slightly reduce the system (C) partition, create a partition to 15 GB, copy the files from recovery to there (to keep the recovery files isolated) and rename this partition as the new D drive.
  The only thing that matters for the tool recovery work is to place the files on a partition of D?
  Has anyone done a thing?
  Will it work?

  Hey,.

  To be honest I have don t think that HDD recovery works if you copy the files to another partition.
  Why you want to do this?

  I use the factory form C: and D: partition by default. On C:, I installed all my programs and on drive D: I saved my files private photo, music, videos, Documents, etc.

  I don't see any reason to create a separate partition for HARD drive recovery files because they are saved in an additional folder.

• HP Envy X 2: laptop recovery partition (D) merged with another partition, not be able to create a recovery media

  I have merged my restore partition HP with another partition I created. Data recovery files are still intact in the New Partition. I have not created a recovery media. When I tried to create the USB Flash Drive recovery using recovery HP Manager media, I get the message that "recovery partition does not exist. How to get again the merged recovery partition and create a recovery USB Flash drive. If simply copy data from recovering files to a USB flash drive will work as a Bootable media in the case that need if in the future.

  @joy1964: should not have done that.  Messing around with the OEM partition somehow good enough recovery ensures it won't work not later, when you need it.

  Personally, I don't trust recovery integrated systems in any case.  You want to be able to recover from an image stored on a disk system large capacity Flash DRIVE or external.  In this way, if the disk fails, I can restore a functional system within minutes.

  Consider using a third-party product known as Macrium Reflect this.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  AND... you no longer have the recovery partition at all and can reuse that space for something else.

• How I develop on a crio and deploy on another

  How I develop on a cRIO and deploy on another?

  I have developed a cRIO application and test on an another cRIO before deployment on many other cRIOs.  (See image below).

  

  I used to do this in real-time systems: develop in our facilities with our materials and test it on their development on the site of the client system.  But with the cRIO things are a little different.  In the Project Explorer window, I host (my computer) and the target (cRIO Lab).  I tried the following:

  • Connection: disconnect the cRIO Lab (via the Ethernet connection) and the cRIO of customer connection and then discover the new cRIO in Project Explorer. This works.
  • Copy VI & variable: I copied the same file under the cRIO Lab structure in the project for the new cRIO Explorer. I did this by adding a VI and a variable - the same ones on the cRIO Lab shared library. It seems to work.
  • Running or not: the problem is when I try to run it because it looks for variables that are shared on the old cRIO.

  System Specs: LabVIEW 8.6.1, cRIO 9074 w / various modules, configured in scan mode and to be deployed as an executable

  What is the best way to copy an one cRIO to another project?

  Hello

  First off I will say that it is the problem more beautiful and informative that I saw.

  Secondly, you should be able to do the following:

  -instead of adding the two targets to your project, just go to the properties of the target (target of click right, select properties) and change the IP that you are testing on. That would be the simplest and cleanest method.

  - Otherwise, in your configuration, when you port code from one to the other cRIO, don't forget to right click target and select deploy all. You must rebuild your application as well.

  Please let me know how these suggestions work out for you.

  Kind regards

  Anna K.

• I moved folders amd64 and i386 to another partition, later deleted them there and now have copies of 0 bytes in the trash who refuse to go away or to restore.

  I found the folders containing these subfolders on my C:\ drive and thought I would move to another partition, because they are not referenced in the registry.  Years later, I deleted those same files, then erased and then removed again from the trash.

  But they refuse to go away... remaining as with attrib C 0 byte files.  Does not restore.  Trash has no security tab by which I could take control of these nuisances, and Unlocker does not work.

  Any way to rebuild the trash or otherwise to clean?  The files remain an embarrassing reminder of my foolishness, but otherwise my system is always very good.

  See if this sounds like your situation and react accordingly:

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is a good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• Installation of a separate install Clean bootable your OS Vista on another partition or drive.

  Installation of a separate bootable 'Clean Install' of my Vista operating system on another partition or drive.

  I want to end up with two installations of my Vista operating system startup:

  1. a Vista bootable installation would be just the current which is functional and has many programs installed etc...

  2. the second installation of Vista would be another partition (another reader would be OK too). It would be a place clean, fresh install any program or data and not of parameters that would be present if it was the first Virgin installation.

  3 on boot-up, only two facilities operating system Vista would be active - one chosen by the user at boot time.

  Is this possible? What license issues/costs should apply?

  jwcrim

  2. install Vista requires 2 licenses of Vista.

  Microsoft sells more than Vista.

  For the price, check online: Newegg, Amazon, etc.

  Or try your local computer repair shop.

  See you soon.

  Mick Murphy - Microsoft partner

• that winsxs folder can be moved to another partition / secondary hard drive

  Hello

  SINNCE the continuous breeding winsxs folder - can it safely be moved to another partition on the hard drive or a secondary hard drive? -in the affirmative; How?

  Shailesh

  Hello

  SINNCE the continuous breeding winsxs folder - can it safely be moved to another partition on the hard drive or a secondary hard drive? -in the affirmative; How?

  Shailesh

  First of all, read this: http://aspoc.net/archives/2008/11/20/winsxs-disk-space-and-windows-7/ he might change his mind.

  Secondly, yes you can but I (and others) would not recommend it: http://aspoc.net/archives/2008/11/20/winsxs-disk-space-and-windows-7/

• WIN 8 64-BIT ON DRIVE C AND WIN 8-32 BIT ON ANOTHER PARTITION

  I WANT TO KNOW IF I CAN INSTALL WIN8-32 BIT ON PARTITION THAT I'VE SEEN WIN8-64 BIT ON DRIVE C. IS POSSIBLE TO CONVERT THE 64-BIT TO 32-BIT WITH THE SAME KEY. PLEASE GIVE ME THE PROCESS TO INSTALL WIN8 ON PARTITION OR CONVERT 32-BIT. AND WHAT HAPPENED TO THE DRIVER?

  I AM UNABLE TO PERFORM SOME ON 64-BIT SOFTWARE BECAUSE IT DOES NOT SUPPORT

  ANIL

  You can install the Windows 32 bit on another partition and have a dual boot configuration setup.

  The key that can be used with 32-bit or 64-bit of Windows 8 is exclusively for 1 disc. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 8 32-bit or 64-bit on another partition or another computer, you must purchase an additional license.

  http://www.Windows.com/buy

• Windows 8 start problem, due to an accidental installation of Windows XP on another partition

  I had Windows 8 Pro on one partition and Windows XP SP3 on another partition for some time and I could choose which start. I decided to remove Win XP and format the partition on that Win XP has been installed. I tried to do it by using formatting option Win XP CD that appears before installation; However, I accidentally installed Win XP on the same partition. The problem is that my laptop is no longer recognizes Win 8 and begins on Win XP. I was wondering if by any chance I could collect Win 8?

  Furthermore, the Win 8 partition is installed, is intact and healthy with all the files inside Windows. Also, I tried to update or reset the installation of Win 8 to help to win 8 DVD, however, it did not work; as a message appears saying that the drive is locked.

  I thank very you much for your time.

  Impatience on your part.

  Amir

  Hey Amir,

  It seems that the boot loader is damaged. You need to install the earlier operating system first, and then install the latest operating system. If you do not have (for example, if you install Windows XP on a computer that is already running Windows 8), you can make your system unusable. This can happen because earlier versions of Windows do not recognize the startup files used in more recent versions of Windows and can overwrite them.

  As you have reinstalled Windows XP on a computer running Windows 8, it has destroyed the boot loader.

  Follow these steps.

  We need to rebuild the Boot Configuration data (BCD). For this we need an installation of Windows 8 media.  If you do not have an installation, you can create a.
  
  Refer to this article.

  Follow the article above to download the installer of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only
  
  To create the installation media, as a result of this article.
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Here are the steps to fix this problem.

  a. Insert the Windows 8 installation media and start the computer using the disc.

  Note: You will need to consult the computer manual on how to set the CD/DVD drive as the first boot device in the BIOS.

  b. Once you start using the installation disk of Windows, on the installation of Windows 8 window, click on repair your computer.

  c. click Troubleshooting and Advanced options.
  d. Select command prompt. Type the following commands in the command prompt and press ENTER after each command.

  Bootrec /fixmbr
  Bootrec /fixboot
  Bootrec /scanos
  Bootrec /rebuildbcd

  Once the order is complete, restart the computer.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Expand or move the virtual machine to another partition / hard disk

  I tried to expand my 90 GB disk but nothing changes, i.e. the virtual machine is still to 60 GB. I have VMware Fusion 6 (Mac/Windows 10) and my VM is monolithic mode. In this true HD, I even 50 GB free and I can't increase the amount again in an attempt to rectify this problem and I can not to decrease either. I thought to change the location of the virtual machine to another partition/hd with more space, but I don't know how. So I need little help to choose and implements one of the solutions below:

  - or regularise space for the new amount

  - or move the virtual machine (vmdk) to an another partition/HD

  - or to convert monolithic mode to 2 GB split

  What is the best solution?

  Thanks in advance

  It's help me;

  Resize a Windows Partition with disk management tool

  When you maximize your virtual hard disk, you must also expand partition of your guest operating system to take advantage of the extra space.

  Fusion resizes the partition of the guest operating system when you resize the virtual hard disk. If you hold the Option key when you click apply to resize the drive, you can manually resize the Windows partition. For Windows 8, Windows 7 and Windows Vista you can use the operating system's disk management tool to resize a partition.

  Prerequisites

  Check that your virtual hard disk is large enough to accept the increase in the size of the partition. See resize a hard disk.

  Procedure

  1 right click on computer and select Manage.

  2. double-click on storage.

  3 double-click disk management.

  4 in the list, right click on the partition to expand and select Extend the Volume.

  5 follow the prompts to resize the partition and click complete and the question of the partition in the disk management pane displays its new size.

  6. close the computer management window

• Requests for comment move the cc on another partition?

  Hello everyone,

  I would have liked to move all of the cc to partition applications another.

  At installation, the program allows me at any time to indicate another partition or another disc, on which I would like to install the software.

  4 cc applications take me more than 3 GB on the partition dedicated to the operating system (SSD drive) and lacking space.

  Thanks in advance for any proposal and soon

  Germain Delsart

  Hi, Germain,.

  I think you want to change the installation location of the CC apps.

  Please launch the desktop creative cloud application > click the gear on the top icon right > select preferences > under the creative cloud section, you can specify the installation location.

  Reference: installation directory change request

  Kind regards

  Sheena

• Tripple fault: Dual boot - win 7 x 64 host - ubuntu 12,04 LTS x 64 comments on another partition (raw disk)

  Hello

  I'm trying to install my second OS (ubuntu 12.04 LTS x 64), installed on the dual boot with grub on another partition of my Win 7 Pro x 64 boot disk.

  Linux partition are not mapped in the windows and the installation is as follows:

  1-0 (HPSF/NTFS) partition: 100 MB win 7 partition

  2. 1 (HPSF/NTFS) partition: c: boot Win 7 pro x 64 (133,24 GB) partition

  3 2 (Linux) partition: / partition Ubuntu 12.04 LTS x 64 (37,25 GB)

  4. 3 (Linux swap) partition: SWAP of Ubuntu 12.04 LTS x 64 (3.72 Gb)

  5. 4 (Linux) partition: / home partition Ubuntu 12.04 x 64 (105,14 GB)

  This drive in SATA connected drive (WDC WD3000HLFS - 01G6U1 ATA Device, (Channel 0, Target 1, Lun 0)).

  When you configure the virtual machine, I set the Partition 2 to be used with this machine.

  I checked the folloing points:

  • Intel processor supports x 64 (i5 750 @ 2.67 GHz, 4 cores)
  • VT turned on in the BIOS

  When you run the virtualized Ubuntu I am getting following error message:

  

  I've attached the vmware.log file.

  What I am doing wrong?

  Can someone help me get my virtualized Ubuntu?

  Please foregive me my English because it is not my native language, I'm French.

  Thanks in advance for your help and advice,

  Concerning

  Stéphane

  PS: If you need more information let me know (please tel me also how to obtain the necessary information)

  strange that then 0 is not present?

  > Really bad news

  Yep - but not really news - older versions of the workstation all have this problem with Windows 7 guests - which is why I still use 2003
  I would setup just the Ubuntu VM in a regular vmdk ANDS store it on any of your other 3 discs