Bootcamp partition bootable no more after the addition of another partition
Until a few days ago that my Bootcamp and OSX worked very well together. When I did my Win10 partition I created it with 64 GB of space. After a while the hard drive became too small, so I decided to add more space to him. The method that I was about to use is: create another partition 64, go to windows, mix two partitions with windows software.
After you have created the partition, I couldn't open Windows more. First he gave me the infamous "no bootable disc not found" - error and later the Bootcamp partition went in the menu selection that start with alt down. I tried several methods, I saw on the internet, but somehow I can not use the command "write" with fdisk, it gives me this error: "fdisk: / dev/disk0: operation not permitted".
Another mistake I met is: "fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory" when you use the command "sudo fdisk e/dev/disk0. I tried this method (the solved by one): repair Boot Camp after having created the new partition and also some methods more I found on the internet, including some methods gdisk. They seem to all fail because the operation is not allowed when using "write".
A few commands:
sudo fdisk e/dev/disk0 |
Fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory Type 'help' for more information Fdisk: 1 > p Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors] Offset: 0 Signature: 0xAA55 From end #: cyl hd s - cyl hd s id [Start - size] ------------------------------------------------------------------------ 1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID > 2: AC 1023 254 63 - 1023 254 63 [409640-724832120] < unknown ID > 3: AB 1023 254 63 - 1023 254 63 Boot Darwin [725241760-1269536] 04:07 1023 254 63-1023 254 63 [726511296-125000000] HPFS/QNX / TO THE |
diskutil list |
/ dev/disk0 (internal, physical): #: NAME SIZE TYPE IDENTIFIER 0: GUID_partition_scheme * GB 500,1 disk0 1: disk0s1 EFI EFI 209.7 MB 2: Apple_CoreStorage Macintosh HD 371,1 GB disk0s2 3: disk0s3 Apple_Boot Recovery 650.0 MB HD 4: Microsoft data base ADDTOWIN 64.0 GB disk0s4 5: Microsoft database BOOTCAMP 64.0 GB disk0s5 / dev/disk1 (internal, virtual): #: NAME SIZE TYPE IDENTIFIER 0: Apple_HFS Macintosh HD GB + 370.7 disk1 Logical volume on disk0s2 3CD4F288-11BC-4701-A05D-4ECF1DF6F9DD Unlocked encrypted |
Thank you in advance.
El Capitan requires SIP should be disabled in the local food only, otherwise these operations fail. You cannot use Fdisk to correct this problem. You need GPT Fdisk (Gdisk) to rebuild the MBR hybrid. Please see Re: [help] can't start Windows (8.1) after resizing partition for example.
Tags: Windows Software
Similar Questions
-
sharing folders HomeGroup falls after the addition of another folder to the Group
I created a new library that contains a 'Painter Videos' folder - is NOT part of the generic video library. This folder is shared as 'view' and contains other folders (content, etc.). Everything works as expected until a new folder is added. Then the losses of the entire homegroup sharing library - until this re-shared.
Is this a normal behavior?
The diagnosis provided no answers. However, looking at the various libraries, I created, noticed it was the only is not in the root of a given disk directory.
I did a few tests more devoted to the painter and other libraries... and the mistake of sharing do not recur. But I had this problem several times in the past. I also had problems were the only corrective means was to leave and join the homegroup. But these questions may have related to my old router... I replaced in recent months.
Also, I moved the videos of painter out of the root of the painter at the root of drives files and re-established the relationship of the library. Homegroup sharing is not disturbed.
The last minute thought: experience of another, louder, I had with Homegroup sharing was with the help of Synctoy to synchronize files between computers on the network. The right must be "view - change" work together for Synctoy. But keep of Sycntoy reports could not find the file... when sharing has been implemented, it worked.
Just tried now and all actions (4) worked without error. The target computer is a Tablet Acer W700 sitting to my right... .the he and my desktop computer can be used simultaneously. Change that recent was to stop the W700 mode 'sleep' while plugged in (it always is).
I am betting that Eve was the General cause of previous problems. But this does not explain the recent issue that prompted my ad!
Consider the issue closed. Dean
-
Bridge does not recognize my camera more after the installation of El Capitan. PLEASE FIX THIS! I can't do my job!
If your Adobe program worked before installed El Capitan and does not work after you have installed El Capitan... How is problem from Adobe?
FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303
He has problems with Mac 10.11 El Capitan... which is perhaps one of them
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html
-See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links
-
My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer. Everything was going well until I tried to launch LR6. It was two weeks ago and a search for many pages of the Adobe Web site. I think I've exhausted all the remedies listed without success codes error A12E5 to questions cloud creative, Manager of Application and error 1: Configuration problems. I'm ready to reformat my computer and try again with Time Machine. Help would be greatly appreciated before I waste more time on this task. Any further suggestions?
Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files
Sign out of your account... Uninstall... to run vacuuming...
-non-Cloud programs, to disable the service before uninstalling
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the vacuuming after uninstalling and before reinstalling is often necessary
-https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Restart your computer... Sign in to your account... Reinstall
-
I use Mac OS 10.10 with 30.0.2 FireFox as my browser. I did call OK On Goggle voice through my G-Mail account. When I ran out of credit. I loaded an extra credit and tried to resume the call. However, I kept get get the following error message "Please download the plugin from voice to make a call. After the link provided leads me in a blind ally. Tried to download a voice plugin and reinstall, but no luck. Tried to close Firefox and reopen, but again no luck. There are no problems when you use Safari as my browser. calls are directed very well.
Can't understand why it has worked very well and thenstopped after laoding additional credit.
Hello
Try to clear your cookies and cache and then try to connect again.
- History (or
(> History) > clear recent history
Or:
"Clear the Cache":- Tools (or
> Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools (or
> Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".
Make sure you that you allow the plugin on the site as it is maybe somehow it changed.
In the world:
- Tools (or
) > Addons > Plugins
- For Google Talk Plugin (and Video Renderer), make sure it is set to "Always enable" or "ask at.
By Site and:
- On the site, click on the padlock or icon globe to the left of the web address in the address bar and click 'more information '.
- Or go to: Tools > Page Info
- Click the "Permissions" tab to see if the plugin is activated on the site.
- Note: You can also go to the Subject: authorizations page and watch your permissions set for each site
- History (or
-
WRT110 hangs after the addition of a new wireless client
Hi all:
I have had this problem since I bought the router. After first seen he question, I checked the firmware version and find that I 1.0.04)is. Information on the next release say nothing on fixing this, so I did not bother to update.
Here's a detailed description:
I have a home network with approximately 8-10 computers. Eight computers are wired. Two are laptops. I travel every week and whenever I come home and start my laptop, the router needs to be reset. If I did not, none of the computers, including my laptop can connect to the network. In addition, I am unable to pull up to the router configuration page. After the reset of the router (unplug) everything works fine. even the wireless on my laptop.
I just got used it although it was frustrating for my children. Now I have another laptop for my wife and she connects more often, and when I'm not home. I don't want to have to deal with to reset the router if I have to.
I've not seen anything like this in the forums, the firmware doesn't seem to be an option, so if anyone has a solution for this, I would appreciate it.
Thanks in advance!
You need to reset hard your router to the factory settings and then try to configure the re-...
To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...
Also, make sure that your computer is configured to obtain an IP automatically, disable any firewall, the security software on the computer before you try to access the configuration page...I understand you want to upgrade the firmware of your router, but you should give it a try if the above does not solve your problem...
-
CalendarAgent close unexpectedly and more after the upgrade to 10.11.5
After the upgrade to 10.11.5, I get popup after popup stating "CalendarAgent quit unexpectedly" (forgive the change of fonts copy paste)
He's going to stay here until I have click and then within 10 seconds, it will return. After reboot, after forcing reboots, nothing I've tried so far solves the problem.
Anyone else having this problem?
joelb
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).
Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, clear the search box, and then select
DIAGNOSIS AND diagnostic USE information reports ▹ user
(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.
If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report - they are very long and rarely useful.
When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
A Web site cannot be displayed more after the upgrade to version 14.01
I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
This page cannot be displayed.What is a Web site or Firefox (or other causes) error?
You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.
-
Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan
Hi all
MBP, in early 2008, El Capitan 10.11.2...
My Samsung Portable Blu - ray writer, SE-506CB/RSBD Monte is more after I upgraded to El Capitan, last week. The drive itself is only a few months old.
The problem is not the USB ports, like other devices work fine with all the USB ports on my MBP.
Note that I'm NOT trying to read or write a Blu - ray disc. I try only to play audio CDs, I've done successfully before the upgrade to El Capitan.
Someone had this problem?
Thank you...
For what it's worth, I have this problem as well. The drive tray would not eject even with a single cable, so I switched to another. I could then open the drawer (seems odd for me) but the disc would not rise. Here's the info from the console log that indicates that the operating system is getting bad feedback from the pilot saying that the disk is defective. This same drive/cable/disc work very well on my MacBook Air 10.10.5 and had worked perfectly well with this MBP even before the service (and "free" upgrade to EC by Apple).
Console
09/01/16 12:34:49.000 kernel [0]: AppleUSB20HubPort@fa130000 011849.735343: AppleUSBHostPort::resetGated: a new attempt to list 100 MS
09/01/16 12:34:50.000 kernel [0]: AppleUSB20HubPort@fa130000 011850.924723: AppleUSBHostPort::resetGated: a new attempt to enumeration in 200ms
09/01/16 12:34:51.000 kernel [0]: AppleUSB20HubPort@fa130000 011852.236095: AppleUSBHostPort::resetGated: a new attempt to enumeration in 400 ms
09/01/16 12:34:52.000 kernel [0]: USBMSC (non-unique) identifier: (Korean characters removed) 0xe8d 1956 0 x 0 x 0, 2
09/01/16 12:35:10.000 kernel [0]: disk3: alignment error.
09/01/16 mds 12:35:12.432 [74]: (Volume.Normal:2464) volume: 0x7ffc330a4c00 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/ENTOURAGE
09/01/16 mds 12:35:12.456 [74]: vsd:0x7ffc33173400 (Volume.Error:577) open failed. failureCount:0 (null)
09/01/16 12:35:23.000 kernel [0]: smb_smb_ssnsetup: GROUND does not support extended security, this server will be deprecated in the future!
09/01/16 mds 12:35:27.471 [74]: context of recycling: 0 (Volume.Normal:166) vsd:0x7ffc33173400 DisabledStore: {}
DisabledRecycleCount = 1;
}
09/01/16 mds 12:35:27.502 [74]: vsd:0x7ffc338c6000 (Volume.Error:577) open failed. {failureCount:1}
DisabledRecycleCount = 1;
}
09/01/16 mds 12:35:57.502 [74]: (Volume.Normal:166) vsd:0x7ffc338c6000 DisabledStore recycling: 2 context: {}
DisabledRecycleCount = 2;
}
09/01/16 mds 12:35:57.540 [74]: vsd:0x7ffc308c8400 (Volume.Error:577) open failed. {failureCount:2}
DisabledRecycleCount = 2;
}
The drive works perfectly well with this disc in 10.10.
-
Hello
I have a photosmart b110 and always used printer wireless with no problems.
I use a laptop HP G62, windows 7 Home premium and as I said, never had any problems with my printer before (and goes through all the printing test pages, is anything wrong with that).
A week ago I changed my (internet) providers, and since there are problems:
But on the HP Networkconfigurationpage prints, the printer gives all the correct information (networkname etc.), it does not react to print from the laptop orders more.
Well, it does work once after the problem started and well after that I have installed on the pc (using "add new printer")
However, the next day, after having restarted the laptop, the connection was working no more.
So far, I called the service provider 3 times (in order to get different people) and heard 'Sorry, no idea' twice and "If you don't have internet, it must be the fault of the printer.
Can someone please give me an idea about where to look?
The last provider had a cable connection, this one is by telephone line, could that be a reason? And if so, why? And how can I solve this problem?
So, I hope that someone can offer some suggestion help! :-)
Reset the printer to the network settings. Then...
Replacement/change your wireless router try here.
http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
However, if you have a gateway device, all devices in gateway (modem + router) are terrible for connectivity and wireless performance. If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.
-
Help, videos play more after the publication
Hey guys,.
Hoping someone can come to my rescue... again.
I encountered this problem where once that a project is published... the videos are no longer will play. Basically I have an introductory video that would play on slide 1. I tried to test the scope by putting a slide before her, but no effect.
What happens in practice is when I publish and then try to view .swf output, the project starts, the screen remains black, progression to the point of break from the video (Captivate is on pause project until end of video) and the video never plays. I have to press play on the bar to continue reading and after that, he moves to the next slide, totally ignoring the intro video.
I tried 3 different videos, 3 different formats (F4V, MP4, FLV) and 2 new projects. In terms simple, videos do not play after the publication. They work very well in Captivate, but after a postback, the project won't play them.
Any ideas? Thank you very much for your time and your help now and in the past.
BTW I use 6 Captivate.
For all those interested in this problem, here is the solution. Download the files here: https://acrobat.com/#d=m6Vq2n63kILAldt * oihfpQ
These files will have to replace the existing files in your Adobe directory. Access your Captivate 6 files in your C drive, go to the folder called "sdk", then "libs". The files that you have received in this download replaces the files that are in "cplibs" which you should see in the "libs" folder Replace the appropriate files (9.0 and 10.0) and then republish it some projects that need fixing. Your videos shoudld play now.
Vikram thanks for the help and I thank Adobe is so quick and useful in their solutions for the user.
-
Vista Business 32 bit crash version after the addition of mor to 2 GB RAM
I am running Vista, up to this point, that I was able to make it work for me, and when I couldn't run my GIS software in Vista I used VistaBoot Pro and started in XP. I was with 2 GB of RAM and I tried to add more 2 GB and when I booted into Vista it cling to the bars of the screen with the green movement and would not go further. I can boot XP using any combination of 4 GB of memory, even if XP does recognize that 3.24 GB. So, why does Vista Business 32 bit version not starting?
Hi Mikelmac,
The option is disabled if the operating system installed on your computer is greater than the version available on DVD, and on the bottom of the screen even, you will find a message indicating the reason for the same.
If your DVD is vista SP1 and Vista SP2 installed you will not be able to perform an inplace upgrade.
Bindu R - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot adjust the levels after the addition of noise to a layer.
Hello
I can't set the levels on a layer after that I previously added noise to it. Basically, I am trying to add a simple snow storm effect to a painting, that I am currently working.
As I do normally is: create a new layer, then fill it black Uni, after that, I go to Filters > noise > add noise, then I add about 150% noise and Monochrome check, press ok, after I have go to image > adjustments > levels and adjust it so it leaves only a few white spots and then I press ok , but this time it nothing happens after I press ok in the window level and the image remains the same. I have done before in earlier versions of photoshop, but it does not work this time for some reason, I think it could possibly be a recent bug. Any help will be appreciated, thanks.
Here is the System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00) x 64
Operating system: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP
Physical processor count: 4
Number of logical processors: 8
Processor speed: 3392 MHz
Built-in memory: 8175 MB
Free memory: 4787 MB
Memory available to Photoshop: 7236 MB
Memory used by Photoshop: 60%
Tile image size: 128K
Image cache level: 4
OpenGL drawing: enabled.
OpenGL drawing mode: Advanced
OpenGL allows Normal Mode: true.
OpenGL allows Advanced Mode: true.
OpenGL allows old GPU: not detected.
Video card provider: NVIDIA Corporation
Renderer video card: GeForce GT 520/PCI/SSE2
Display: 1
View the limits: = top: 0, left: 0, bottom: 768, right: 1366
Video card: 1
Graphics card: NVIDIA GeForce GT 520
OpenCL unavailable
Driver version: 8.17.12.6785
Driver date: 20110323000000.000000 - 000
Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
Video mode: 1366 x 768 x 4294967296 colors
Legend of the video card: NVIDIA GeForce GT 520
Memory: 1024 MB
Texture size video Rect: 16384
Serial number: 92298814468164638664
The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Zero Photoshop has async I/O active
Scratch the volumes:
1.35 T, 872,4 G free starter
Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\
Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\
Additional Plug-ins folder: not defined
Installed components:
A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library
ACE.dll ACE 2012/01/18-15: 07: 40 66,492997 66.492997
adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe linguistic Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16: 00: 02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471
Adobe AdobePIP.dll 6.0.0.1654 product improvement program
AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661
AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGA 2012/01/18-15: 07: 40 66,492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000
ARE.dll ARE 2012/01/18-15: 07:40 66,492997 66.492997
Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830
Bib.dll BIB 2012/01/18-15: 07: 40 66,492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15: 07: 40 66,492997 66.492997
boost_date_time.dll product DVA 6.0.0
boost_signals.dll product DVA 6.0.0
boost_system.dll product DVA 6.0.0
boost_threads.dll product DVA 6.0.0
CG.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
Adobe CIT.dll CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15: 07: 40 66,492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll product DVA 6.0.0
dvacore.dll product DVA 6.0.0
dvamarshal.dll product DVA 6.0.0
dvamediatypes.dll product DVA 6.0.0
dvaplayer.dll product DVA 6.0.0
dvatransport.dll product DVA 6.0.0
dvaunittesting.dll product DVA 6.0.0
Dynamiclink.dll product DVA 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923
libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)
libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll product DVA 6.0.0
MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Adobe Photoshop CS6 CS6 Photoshop.dll
Adobe Photoshop CS6 CS6 plugin.dll
PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383
Adobe Photoshop CS6 CS6 PSArt.dll
Adobe Photoshop CS6 CS6 PSViews.dll
SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082
TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll kernel 9.3.0.113
Geom TFKGEOM.dll kernel 9.3.0.113
Adobe TFUGEOM.dll, UGeom © 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112
U3D writer 9.3.0.113 wu3d.dll
Required plugins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Accented edges 13.0
Adaptive wide-angle 13.0
SMA 3.11x01
Angular Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Bas-relief 13.0
BMP 13.0
Camera Raw 7.1
Chalk and charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Clouds of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
COLLADA 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Halftone color 13.0
Color pencil 13.0
CompuServe GIF 13.0
Pencil tale 13.0
Craquelure 13.0
Crop and straighten Photos 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Crop and straighten Photos filter 13.0
Hatch: 13.0
Crystallize 13.0
Cutting 13.0
Features dark 13.0
Deinterlacing 13.0
DICOM 13.0
Difference clouds 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Glow 13.0
Move 13.0
Dry brush 13.0
Eazel acquire 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Embed watermark 4.0
Entropy 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Extrude 13.0
FastCore routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Fiber 13.0
Film Grain 13.0
Gallery of filters 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Fresco 13.0
Glass 13.0
Scarlet contours 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Grain 13.0
Graphic pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Outlines in ink 13.0
JPEG 2000 13.0
Flattening coefficient 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Blur of the lens 13.0
Correction of the lens 13.0
Lens Flare 13.0
Liquefy 13.0
Operation of Matlab 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
13.0 maximum (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Measure Core 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
13.0 median (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Mosaic tiles 13.0
Multiprocessor support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Neon 13.0
Paper notes 13.0
NTSC colors 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Ocean Ripple 13.0
13.0 oil painting
OpenEXR 13.0
Paint Daubs 13.0
13.0 palette knife
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Photocopy 13.0
Engine 3D Photoshop 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Photo filter package 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Plaster 13.0
Plastic wrap 13.0
PNG 13.0
Pointillism 13.0
Polar coordinates 13.0
Portable Bit map 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Poster edges 13.0
Radial blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Range 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Read watermark 4.0
Crosslinking 13.0
Ripple 13.0
Rough Pastels 13.0
Save for the Web 13.0
ScriptingSupport 13.0
Shear 13.0
Asymmetry 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Splash 13.0
Spherize 13.0
Sponge 13.0
13.0 sprayed strokes
Stained glass 13.0
Stamp 13.0
SD 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Sumi-e 13.0
Summons 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Targa 13.0
Texture veneer 13.0
13.0 tiles
Torn edges 13.0
Watch twirl 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Draft of 13.0
Vanishing point 13.0
Variance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Variations of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Water paper 13.0
Watercolor of 13.0
Wave 13.0
Wavefront | OBJ 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
WIA support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)
Zig - zag 13.0
Plug-ins option and the third: NONE
Plug-ins that could not load: NONE
Flash:
Mini Bridge
Kuler
Install TWAIN devices: NONE
The blur of noise before using the levels settings?
Filter > blur > blur more
-
Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.
I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.
Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).
Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!
I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.
The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).
When I deleted the printer on the Vista PC and added to the correct address everything worked fine.
Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.
-
Windows7 Home edition: Language bar still missing after the addition of several languages
Hi This is the standard procedure:
If the language bar is not listed in the menu toolbars, you do not have many input languages installed on your computer. You must add other languages using region and language in Control Panel.
Follow the steps mentioned below to add an input language:
1. open region and language by clicking on the Start button, click on the Control Panel, clicking clock, language, and region, click the region and language.
2. click on the keyboards and languages tab and then click on change keyboards.
3. under installed services, click Add.
4. double-click on the language that you want to add, double-click keyboard, select the text services options you want to add and then click OK.Q: I have added several languages (British English, simplified Chinese, Japanese), language bar still did not appear on the taskbar
If you don't see the language bar, right-click the taskbar, point to toolbars, and then click Language bar. For more information about the language bar, see the article below for more information:
Q: bar language still isn't in the toolbars after that several languages have been added. I've resorted to using Tablet PC Input Panel. Please advise!
Thank you Irfan, I just thought about it:
Control Panel > region and language > keyboards and languages > change keyboards.
Under the "language bar" tab, option "Hidden" was checked and I changed "Anchored in the taskbar" option and now the language bar appears on the taskbar. Thanks for the reply anyway.
Maybe you are looking for
-
I'm having a problem where Firefox keeps asking for my password to Amazon, even if I tell Firefox NOT to remember this password. In Firefox options, Amazon is clearly recognized as a site for which does not save passwords.
-
Satellite P30-133: where can I find the drivers?
HelloI lost my recovery discs, so I installed windows, is one know where I can find all the drivers to download? I find all the other models but not mine? also, anyone know how much it costs to buy the new recovery disc? Thank you
-
How to stop a file from the application of a sort order on the files
Under Win XP, how can I have a folder of photos in my pictures are in the order that I copied them in Windows instead trying to sort by a file attribute, as the name. Whenever I get close and reopen a file, Windows has sorted them rather than leavin
-
Hello, is it possible to set the time-out for the thread? Or kill the thread if it runs longer than expected? If so, how? Thank you
-
My desktop icons reset their positions to restart windows 7 64 bit
I try MicrosoftFixit.WinFileFolder and icon cache Rebuilder, it works: my desktop icons are restored, but when I reboot my desktop icons windows are reset to zero once again, I have to throw the fix for every time windows starts. If someone knows why