Deployment options for Aironet 2600 series
I got a 2600 (AIR-CAP2602E-A-K9) and wanted to know if we should use a cisco regulator or can be used as a stand-alone wireless unit AP? Depending on the response, I may have a follow-up question.
Thank you
I received a 2600 (AIR-CAP2602E-A-K9) and wanted to know if one has to use a cisco Controller unit or can one use the AP as a standalone wireless unit?
The AP can be converted into stand-alone. Currently, the product ID States that it is running IOS based controller. To convert offline, read this: you use a server TFTP to return to a previous version
Tags: Cisco Wireless
Similar Questions
-
Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?
Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?
I have (2) AIR-SAP2602I-A-K9, configured the same way.
on two different remote LANs.
They don't seem to be handing out addresses via DHCP.
{If I connect to a local network with another DHCP server}
wireless devices can obtain addresses
This another DHCP server on the LAN through the access point.}
I followed 12.4.25d. JA.cg.pdf
Configuration of the Access Point to provide the Service DHCP 5-22
---------|---------|---------|
e.g. 3444-RCS1-AN #show running-config
Building configuration...
version 15.2
3444-RCS1-YEAR host name
no ip Routing
USH - DM IP domain name
DHCP excluded-address IP 192.168.29.89
IP dhcp RCS1 pool
network 192.168.29.88 255.255.255.248
router by default - 192.168.28.1
Rental 1 0
interface BVI1
IP 192.168.28.211 255.255.254.0
no ip route cache
default IP gateway - 192.168.28.1
---------|---------|---------|
---------|---------|---------|
e.g. 3444-RCS2-AN #show running-config
Building configuration...
version 15.2
3444-RCS2-YEAR host name
no ip Routing
USH - DM IP domain name
DHCP excluded-address IP 192.168.129.81
IP dhcp RCS2 pool
network 192.168.129.80 255.255.255.248
router by default - 192.168.128.1
Rental 2 0
interface BVI1
IP 192.168.128.171 255.255.254.0
no ip route cache
default IP gateway - 192.168.128.1
---------|---------|---------|
Thats the DHCP Pool range 192.168.29.88 through 192.168.28.95
Well this will confuse your customers.
And this is NOT how to set up your "range". See below:
DHCP excluded-address IP 192.168.29.1 192.168.29.87
DHCP excluded-address IP 192.168.29.96 192.168.29.254
IP dhcp RCS1 pool
network 192.168.28.211 255.255.254.0
router by default - 192.168.28.1
Rental 1 0
-
Deployment options for businesses who want to use Windows RT as remote terminals
We are considering the purchase of several tablets of RT to serve as remote terminals to desktop PC.
The tablets do not need to run Windows apps, so RT is all we should need., he must have just VPN access and be able to RDP to Windows desktop computers to run applications remotely.Users would use the tablets of RT to work from home in distance by controlling their desktops to office via VPN or use them in the desk in a conference room, connected to a projector for presentations and probably also of the RDP to their desktop to run applications, because we don't want any applications other than RDP and VPN on the shelves.Is there a way to deploy locked preconfigured images so they wouldn't need to configure manually whenever we want to wipe and reimage?RT tablets can be locked to prevent users from logging in with other accounts of users approved to install apps or change settings?Are there options MDM remotely manage and monitor devices you can for iPads?See the following article:
-
Aironet 2600 series AP (AIR-CAP2602E) to stand alone
Hello
I bought the AP incorrectly, instead of getting the "Standalone/standalone" version (AIR-SAP2602E), but I bought the controller-based version
(AIR-CAP2602E); My question is that I can use 'ap3g2-k9w7 - tar.152 - 2.JB.tar' too flash to a standalone "Standalone /?
If Yes, can anyone help to POINT me to the "Flashing method" right and necessary things like cable from the console or just "ethernet cable" will do? Enjoy it!
When you download the image, if you hover your mouse over the name of file, a pop up appears with MD5.
Sent by Cisco Support technique iPhone App
-
Trouble getting a Cisco 2600 series AP to stay connected to WLC 5508
Hello
I recently loaded the independent our old APs upgrade to LWAPs. We have a WLC 5508 to our Virtual Co - Lo and I use Flexconnect to accommodate local switch and dhcp on our sites. I have updated more than 50 APs and joined them to the controller. These include only the 1130AG and 1240AG models. However they work perfectly and stay connected to the controller. I'm having is with a new batch of 2600 series APs stay connected to the controller. I tried to do research in what may cause disconnect it but have yet to find a solution. I use DNS to resolve queries for CAPWAP & LWAPP APs to the controller on our EXTENSIVE network. Read other messages I thought that this is perhaps a problem with packages to drop but have had our provider that manages Sonicwalls at both ends of the WAN confirm for me that there is no packet loss. Here are the logs that I collected through the puttty of the WLC & AP. Any help would be greatly appreciated.
AP, I do the test on:
NAME: "AP2600', DESCR: 'Cisco Aironet 2600 Series (IEEE 802.11n) Access Point.
PID: AIR-CAP2602I-A-K9, VID: V01, SN: FTX1740J8V1
WLC in question:
Name of the manufacturer... Cisco Systems Inc..
Product name... Cisco controller
Version of the product... 7.3.112.0
Bootloader Version... 1.0.1
Retrieving Image Version field... 6.0.182.0
Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27
Build Type....................................... DATA + WPS
System name... wificontroller
Location of the system... Corp
Contact System... Net engineer
ObjectID of system... 1.3.6.1.4.1.9.1.1069
Redundancy mode... People with disabilities
IP Address....................................... 10.250.32.8
Last Reset....................................... Software reset
Time system... 190 days 3 hours 34 minutes 24 seconds
Location of the time zone of the system... (GMT - 5:00) Eastern (USA and Canada)
The country is set... USA - United States
Operating environment... Utilities (0 to 40 ° C)
Limits the internal temperature alarm... 0 to 65 ° C
-Other - or ITU (q)
... Internal temperature 38 C
Outdoor temperature... + 20 C
Fan Status....................................... Ok
State of 802. 11 b network... Activated
State of 802. 11A network... Activated
Number of wireless LANs... 14
Number of Active Clients... 71
Built-in MAC address... C8:9 C: D: 8 1: 52:E0
Power supply 1... Currently, OK
Power supply 2... Absent
Maximum number of taken access points supported... 100
Here is the result which leaves on concluded that the AP joins the WLC for a short period and then goes offline
WT-4thFlr-AP3 #.
* 15:42:04.419 Dec 14: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST
., 3)
* 15:42:11.443 Dec 14: EVT-4-AVT %: write flash: / done event.capwap
* 15:42:11.483 Dec 14: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode
* 15:42:11.487 Dec 14: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION
* 15:42:11.487 Dec 14: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.250.32.8:5246
* 15:42:11.571 Dec 14: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.
* 15:42:21.575 Dec 14: % 3-CAPWAP-ERRORLOG: MWAR selected ' wificontroller'(index 0).
* 15:42:21.575 Dec 14: % 3-CAPWAP-ERRORLOG: go join a capwap controller
* 15:42:12.000 Dec 14: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246
* 15:42:14.303 Dec 14: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.250.32.8 peer_port: 5246
* 15:42:14.303 Dec 14: % CAPWAP-5-SENDJOIN: send request to join 10.250.32.8
* 15:42:15.127 Dec 14: "Promiscuous" from Ethernet mode
* 15:42:15.535 Dec 14: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP
* 15:42:15.667 Dec 14: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1
* 15:42:15.667 Dec 14: AC setting hop first MAC: 0017.c575.a23c
* 15:42:15.855 Dec 14: % CAPWAP-5-JOINEDCONTROLLER: AP joined controller wificontroller
* 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: map No. LS Flex to load ACL configuration file. To connect to the controller to get the configuration file
* 15:42:15.915 Dec 14: LWAPP-4-CLIENTEVENTLOG %: no central Dhcp configuration file map to load. To connect to the controller to get the configuration file
* 15:42:15.915 Dec 14: % LWAPP-3-CLIENTERRORLOG: connected mode
* 15:42:23.639 Dec 14: FEDS-6-ACTIVATED %: Signature of IDS is loaded and enabled
* 15:42:34.615 Dec 14: CLEANAIR-6-State: Slot 0 disabled
* 15:42:34.615 Dec 14: CLEANAIR-6-State: Slot 1 disabled
* 15:45:43.783 Dec 14: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST
(. 11).
* 15:45:43.787 Dec 14: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode
* 15:45:43.787 Dec 14: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION
* 15:45:43.787 Dec 14: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.250.32.8:5246
* 15:45:43.867 Dec 14: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.
* 15:45:53.867 Dec 14: % 3-CAPWAP-ERRORLOG: MWAR selected ' wificontroller'(index 0).
* 15:45:53.867 Dec 14: % 3-CAPWAP-ERRORLOG: go join a capwap controller
* 15:45:44.000 Dec 14: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246
* 15:45:46.315 Dec 14: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.250.32.8 peer_port: 5246
* 15:45:46.315 Dec 14: % CAPWAP-5-SENDJOIN: send request to join 10.250.32.8
* 15:45:46.487 Dec 14: "Promiscuous" from Ethernet mode
* 15:45:49.903 Dec 14: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP
* 15:45:50.031 Dec 14: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1
* 15:45:50.031 Dec 14: AC setting hop first MAC: 0017.c575.a23c
Here are the results of the client debugging capwap event about to access:
WT-4thFlr-AP3 #debug capwap customer event
Display debugging EVENT customer CAPWAP is on
WT-4thFlr-AP3 #.
* 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.
* 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request
* 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8
* 15:55:08.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:55:08 UTC 14 December 2013
* 15:55:25.579 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:55:25.587 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:55:25.587 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:55:25.587 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response
* 15:55:25.827 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:55:25.835 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:55:25.835 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:55:25.835 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response
* 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.
* 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request
* 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8
* 15:55:56.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:55:56 UTC 14 December 2013
* 15:56:25.735 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:56:25.743 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:56:25.743 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:56:25.743 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response
* 15:56:25.983 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:56:25.991 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:56:25.991 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:56:25.991 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response
* 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.
* 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC
* 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request
* 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0
* 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.
* 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8
* 15:56:56.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:56:56 UTC 14 December 2013
Here are the results of debug capwap client package in detail:
WT-4thFlr-AP3 #.
* 14 Dec 15:59:01.823: < start="" of="" capwap="" packet ="">>
* 15:59:01.823 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 15:59:01.823 Dec 14: Type Msg: CAPWAP_ECHO_REQUEST
* 15:59:01.823 Dec 14: Msg length: 0
* 15:59:01.823 Dec 14: Msg SeqNum: 44
* 14 Dec 15:59:01.823: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:01.831: < start="" of="" capwap="" packet ="">>
* 15:59:01.831 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:01.831 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:01.831 Dec 14: Type Msg: CAPWAP_ECHO_RESPONSE
* 15:59:01.831 Dec 14: Msg length: 15
* 15:59:01.831 Dec 14: Msg SeqNum: 44
* 15:59:01.831 Dec 14:
* 15:59:01.831 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 11
* 15:59:01.831 Dec 14: the vendor identifier: 0 x 00409600
* 15:59:01.831 Dec 14:
* 15:59:01.831 Dec 14:
IE: UNKNOWN IT IS ABOUT 151
* 15:59:01.831 Dec 14: IE length: 5
* 15:59:01.831 Dec 14: decode the routine unavailable, Hex Dump printing
* 15:59:01.831 Dec 14:
52 80 46 00 AC
* 14 Dec 15:59:01.831: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:20.931: < start="" of="" capwap="" packet ="">>
* 15:59:20.931 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:20.931 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:20.931 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST
* 15:59:20.931 Dec 14: Msg length: 93
* 15:59:20.931 Dec 14: Msg SeqNum: 38
* 15:59:20.931 Dec 14:
* 15:59:20.931 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 89
* 15:59:20.931 Dec 14: the vendor identifier: 0 x 00409600
* 15:59:20.931 Dec 14:
* 15:59:20.931 Dec 14:
IE: RRM_NEIGHBOR_CTRL_PAYLOAD
* 15:59:20.931 Dec 14: IE length: 83
* 15:59:20.931 Dec 14: decode the routine unavailable, Hex Dump printing
* 15:59:20.931 Dec 14:
00 0 HAS FA 20 08 01 00 07 0A 20 08 03 00 01 FA F4
01 00 00 3 B4 2ND 2ND 06 94 51 79 25 C7 B2 B4 E7
22 FD BE F6 04 00 00 00 00 00 00 00 00 50 52 4F
53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 01 06 0B
01 01 01
* 14 Dec 15:59:20.931: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:20.931: < start="" of="" capwap="" packet ="">>
* 15:59:20.931 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 15:59:20.931 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE
* 15:59:20.931 Dec 14: Msg length: 8
* 15:59:20.931 Dec 14: Msg SeqNum: 38
* 15:59:20.931 Dec 14:
* 15:59:20.931 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4
* 15:59:20.931 Dec 14: result of Code: CAPWAP_SUCCESS
* 14 Dec 15:59:20.931: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:21.139: < start="" of="" capwap="" packet ="">>
* 15:59:21.139 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:21.139 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:21.139 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST
* 15:59:21.139 Dec 14: Msg length: 111
* 15:59:21.139 Dec 14: Msg SeqNum: 39
* 15:59:21.139 Dec 14:
* 15:59:21.139 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 107
* 15:59:21.139 Dec 14: the vendor identifier: 0 x 00409600
* 15:59:21.139 Dec 14:
* 15:59:21.139 Dec 14:
IE: RRM_NEIGHBOR_CTRL_PAYLOAD
* 15:59:21.139 Dec 14: IE length: 101
* 15:59:21.139 Dec 14: decode the routine unavailable, Hex Dump printing
* 15:59:21.143 Dec 14:
01 0 TO FA 20 08 01 F4 00 07 0A 20 08 00 01 0C FA
01 00 00 3 B4 2ND 2ND 06 94 51 79 25 C7 B2 B4 E7
22 FD BE F6 04 00 00 00 00 00 00 00 00 50 52 4F
53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 24 28 2
30 34 38 3 40 95 99 9 01 01 01 01 01 01 01 A1
01 01 01 01 01
* 14 Dec 15:59:21.143: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:21.143: < start="" of="" capwap="" packet ="">>
* 15:59:21.143 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 15:59:21.143 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE
* 15:59:21.143 Dec 14: Msg length: 8
* 15:59:21.143 Dec 14: Msg SeqNum: 39
* 15:59:21.143 Dec 14:
* 15:59:21.143 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4
* 15:59:21.143 Dec 14: result of Code: CAPWAP_SUCCESS
* 14 Dec 15:59:21.143: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:25.547: < start="" of="" capwap="" packet ="">>
* 15:59:25.547 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 15:59:25.547 Dec 14: Type Msg: CAPWAP_WTP_EVENT_REQUEST
* 15:59:25.547 Dec 14: Msg length: 14
* 15:59:25.547 Dec 14: Msg SeqNum: 45
* 15:59:25.547 Dec 14:
* 15:59:25.547 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10
* 15:59:25.547 Dec 14: the vendor identifier: 0 x 00409600
* 15:59:25.547 Dec 14:
* 15:59:25.547 Dec 14:
IE: RRM_LOAD_DATA_PAYLOAD
* 15:59:25.547 Dec 14: IE length: 4
* 14 Dec 15:59:25.547: slot ccaLoad 0 rxLoad 0 txLoad 0 33
* 14 Dec 15:59:25.547: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:25.555: < start="" of="" capwap="" packet ="">>
* 15:59:25.555 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:25.555 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:25.555 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE
* 15:59:25.555 Dec 14: Msg length: 0
* 15:59:25.555 Dec 14: Msg SeqNum: 45
* 14 Dec 15:59:25.555: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:25.795: < start="" of="" capwap="" packet ="">>
* 15:59:25.795 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 15:59:25.795 Dec 14: Type Msg: CAPWAP_WTP_EVENT_REQUEST
* 15:59:25.795 Dec 14: Msg length: 14
* 15:59:25.795 Dec 14: Msg SeqNum: 46
* 15:59:25.795 Dec 14:
* 15:59:25.795 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10
* 15:59:25.795 Dec 14: the vendor identifier: 0 x 00409600
* 15:59:25.795 Dec 14:
* 15:59:25.795 Dec 14:
IE: RRM_LOAD_DATA_PAYLOAD
* 15:59:25.795 Dec 14: IE length: 4
* 14 Dec 15:59:25.795: slot ccaLoad 1 rxLoad 0 txLoad 0 0
* 14 Dec 15:59:25.795: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:25.803: < start="" of="" capwap="" packet ="">>
* 15:59:25.803 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:25.803 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:25.803 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE
* 15:59:25.803 Dec 14: Msg length: 0
* 15:59:25.803 Dec 14: Msg SeqNum: 46
* 14 Dec 15:59:25.803: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:30.375: < start="" of="" capwap="" packet ="">>
* 15:59:30.375 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:30.375 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:30.375 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST
* 15:59:30.375 Dec 14: Msg length: 17
* 15:59:30.375 Dec 14: Msg SeqNum: 40
* 15:59:30.375 Dec 14:
* 15:59:30.375 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 13
* 15:59:30.375 Dec 14: the vendor identifier: 0 x 00409600
SlotId: 0
Mobile Mac Addr: BC:52:B7:E3:17:CB
* 14 Dec 15:59:30.375: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:30.375: < start="" of="" capwap="" packet ="">>
* 15:59:30.375 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 15:59:30.375 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE
* 15:59:30.379 Dec 14: Msg length: 8
* 15:59:30.379 Dec 14: Msg SeqNum: 40
* 15:59:30.379 Dec 14:
* 15:59:30.379 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4
* 15:59:30.379 Dec 14: result of Code: CAPWAP_SUCCESS
* 14 Dec 15:59:30.379: < end="" of="" capwap="" packet ="">>
* 14 Dec 15:59:30.387: < start="" of="" capwap="" packet ="">>
* 15:59:30.387 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 15:59:30.387 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 15:59:30.387 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE
* 15:59:30.387 Dec 14: Msg length: 0
* 15:59:30.387 Dec 14: Msg SeqNum: 47
* 14 Dec 15:59:30.387: < end="" of="" capwap="" packet ="">>
* 14 Dec 16:00:00.387: < start="" of="" capwap="" packet ="">>
* 16:00:00.387 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246
* 16:00:00.387 Dec 14: Type Msg: CAPWAP_ECHO_REQUEST
* 16:00:00.387 Dec 14: Msg length: 0
* 16:00:00.387 Dec 14: Msg SeqNum: 48
* 14 Dec 16:00:00.387: < end="" of="" capwap="" packet ="">>
* 14 Dec 16:00:00.395: < start="" of="" capwap="" packet ="">>
* 16:00:00.395 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control
* 16:00:00.395 Dec 14: HLEN 2, Radio ID 0, WBID 1
* 16:00:00.395 Dec 14: Type Msg: CAPWAP_ECHO_RESPONSE
* 16:00:00.395 Dec 14: Msg length: 15
* 16:00:00.395 Dec 14: Msg SeqNum: 48
* 16:00:00.395 Dec 14:
* 16:00:00.395 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 11
* 16:00:00.395 Dec 14: the vendor identifier: 0 x 00409600
* 16:00:00.395 Dec 14:
* 16:00:00.395 Dec 14:
IE: UNKNOWN IT IS ABOUT 151
* 16:00:00.395 Dec 14: IE length: 5
* 16:00:00.395 Dec 14: decode the routine unavailable, Hex Dump printing
* 16:00:00.395 Dec 14:
52 80 81 00 AC
* 14 Dec 16:00:00.395: < end="" of="" capwap="" packet ="">>
Try reducing the mtu on ap 2600.
-
I created the Package CC "exsample" series of license name and disabled the Office CC Implementation Committee and selected the option "specify directory for deployment" or 'Directory to specify' in the Advanced dialog configrations.
I started to deploy in the victory of the client PC with command line like below,
msiexec /i exsample.msi TARGETDIR = D:\test
or
msiexec /i INSTALLDIR = D:\test exsample.msi
Installation was completed though, apps had been installed in the defalt directory "C:\Program files".
In CC helps Packer said as the folliwings on the location of the Installation,
"The Application Manager offers you the following options for the deployment location:
Deploy in the default directory of the application: the player is by default the system unit; the default path is \Program Files in Windows/applications under Mac OS.
Specify the directory for the deployment: allows users to end to specify the installation path when the package is deployed. On Mac OS, users are invited on the user interface, while on Windows, it's a command-line only option.
' Specify the directory: enter the path to the location to a specific installation location.
Is - this explanation is wrong?
How can I change the installation directory in windows PC where to deploy the package to the series of licenses?
Any information would be appreciated.
Thanks in advance.
Kappa-maki
My friend told me that the correct command is as below,
MsiExec.exe /i example.msi ADOBEINSTALLDIR = "D:\test\" / quiet
It worked well!
-
How to analyze the files using Lexmark 2600 Series
To the right:
I have a Lexmark 2600 Series 3-in-1 printer. It is supposed to be able to scan. However, I can't figure out how to parse the files and I've lost the installation disc. However, the printer is already installed on my computer. I can't analyze. Can someone help me on how to scan files with this printer? Or, is there something I need to do first before that I can use the scanner fuction?
Hi Xnygga,
You will need to go to the Lexmark Web site to download the latest software/drivers for your scanner:
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US & segment = DOWNLOAD
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Point of access Cisco Aironet 1200 series help
We have 4 Cisco Aironet 1200 Access Points and they are all set to authenticate with our RADIUS server. However, authentication is hooked and can't understand why. Does anyone have any knowledge/experience with Cisco Aironet 1200 Access Points configuration?
OK, I do not work with the GUI so although the memory is a little hazy but from the APs home page look on the left hand side and there is an option for something like "Software Setup" or something to that effect. You should be able to find the IOS version of here. This requires that you are indeed runnig IOS code. How old are these APs? If more than a few years ago (and perhaps even more recent) that they could very well be running VxWorks and then we are in a different ball game. If you see what I have described above and the homepage for the AP is often white with a bit of greenish-blue, bluish-green color then IOS, if it is more colorful, yellow stuff and VxWOrks.
I hope this helps. Let me know if you need anything that anyone else. I will try to answer as soon as POSSIBLE.
-
Hello
I have a cisco aironet 1100 Series wireless access point.
by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.
I need your help please.
For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).
I downloaded the file c100-k9w7 - mx.123 - 8.jed
and I download the tftp (tftpd32) servers
I have the router connected directly to a pc with the static ip address of 10.0.0.2
but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.
and by a tftpd32 I try but no function.
I don't know what I'm doing wrong.
other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.
Thank you.
I'll wait your hepls.
Convert a standalone Lightweight Access Point
http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272 -
Key the Option for monitoring REMOT sx20
SX20 shows "snapshot requires a key option for remote monitoring. but I have not received any key option with the option key of remote monitoring feature of Cisco. another link said remote monitoring option will require additional cost of 1 January 2016. Now my question is how to activate it and if it takes the cost what is the part number for key option for remote monitoring...
The obligation to have a key Option Remote Monitoring installed to see snapshots of the cameras and the content on the page of the Web Interface call control was introduced in the version of the TC7.3.3 software. If you are running a version of software before that, then you will be able to see the snapshots without such a key installed.
To get the key of the remote control, you should buy Cisco, is around US $100 price per endpoint.
The license you wish to lie beneath the level superior SKU L-TP-RM. Then choose L-C-SERIES-RM, L-MX-SERIES-RM, L-SX-SERIES-RM, L-EX-SERIES-RM or L-TEACHER-SERIES-RM below, according to what end point of model you need to.
There are a number of people in the forums who see it as nothing else that a money grab from Cisco as they now charge for a feature that should be free.
This has been discussed several times in these forums before - some links to sample on this feature, the necessary licenses, and problems with the features are:
- tc730-websnapshots-broken-even-further-design
- TC-option-key
- topic-cisco-telepresence-sx20
- published tc734
Wayne
--
Remember the frequency responses and mark your question as answered as appropriate. -
Is there an option for a default application configuration in weblogic?
Hi guys,.
I have an application deployed on a server admin.
I access my http://localhost:7001 app / browsestore
I want to access the application only if I enter http://localhost:7001 in the address bar
Is there an option for a default application configuration?
Thanks in advance :)Hello
OPTION - 1).
Assign the value of the 'context root' as element.
It will make your WebApplication a default web on the server application...
To change the root of context in weblogic.xml next entry is necessary:
Example:
/
OPTION - 2).
If you do not want to change your "weblogic.xml" and then log in to the admin console-
Servers---> YourManagedServerName (Click)---> Protocol (tab)---> Http (sub-tab)---> the default Web application context root:NOTE: -.
In the field above, please specify your root context WebApplications that precedes a slash (example: /MyContextRoot)...sothat after the restart of the server the Application will become your default WebApp servers...)
.
.
.
Thank you
Jay SenSharma
http://jaysensharma.WordPress.com (WebLogic wonders are here) -
Hello. I wanted to buy an iphone 7 more factory unlocked. I'm going out of country next month so I have to use outside of US. I tried pre order but it is asking for my carrier, (I use Tmobile but I have to use this cell phone in another country) there is no option for iphone "carrier free/unlocked. How am I supposed to order free iphone carrier?
7 iPhone more
You will not have this option until Apple offers it. It should happen fast enough, but no specific timetable.
Good luck
GB
-
When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc. It only shows the parameters for the flash player. How can I fix?
You can find the URL of the thumbnail by following these steps:
In the context menu, choose {inspect element}.
Now, you can see the URL in the source down (perhaps you click the small arrow to the left of the line of seledted firstly to show). -
No option for the email address for the import
I import the list of 'people' to outlook.com in a csv file. When I get the choice to realign the fields of address book to import data record, there is no option for 'email address' in the record to bind to data. Everything what is important is the name and surname of the person (which I chose) but I want their email also. Have I missed something or if the e-mail option has been deleted for some reason any?
OK, I created a file OutlookContacts.csv in my Hotmail account and haven't tried to import as usual and found, like you, there is no e-mail address in the "Record of import data" column. So, I open the csv file in a csv Editor (CSVed) and found that the e-mail address is in the column 48 of 56 column file. I deleted all the unnecessary columns to make a file of 16 columns. According to realign the records from top to bottom and checking the boxes for the areas concerned, the new csv file imported perfectly.
I guess that TB has a limit on the number of columns that are read during the import.
-
I am trying to sync my iphone to my computer via i-tunes soft ware. It does give me an option for the phone device. How can I get the phone icon in the menu bar?
Mac or Windows?
Maybe you are looking for
-
Oblong box calendar. How do I disable this feature?
You have to disable the function of oblong box that keeps appearing on the right side of my screen as I type these words: 'what's new in Calendar' in this box. He added the words, "You can configure features of calendar in settings...". Have not the
-
The dsc-w710 camera can be used as a webcam
The w710 dsc can be shown directly on a computer for the photo or video capture screen?
-
Wireless can be used in windows multipoint server 2010
I work on a HP Multipoint Server (MS6000) with a standard operating system (Microsoft Windows Server 2008) and has a router (WNDR3400) in another computer which is about 40 feet of the HP Multipoint server. I also have a wireless Internet adapter WiF
-
How can I transfer my photos from computer to the thumb drive?
I want to transfer my photos from my computer to a flash drive, how can I do this?
-
Cannot install Windows Live essential 2011 error 0 x 80280008
I said that I already have an idea of different construction of Windows live.