Deployment tool

Similar Questions

• Script Web deployment tool

  Hello

  does anyone know if there is a way to install script and - configure the MS Web deployment tool?

  Installation seems to be possible.

  Config is quite difficult - at the moment we are struggling with the IIS for 'Management Service Delegation' parameters.

  Is it possible to define the Type of identity by script?

  (e.g. setAcl, createApp, backupSettings - see screenshot)

  

  Thank you

  G

  Hello

  Please post your question here for assistance:

  https://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Deployment tools from VMware Cap IQ requirment.

  Hello

  I'm new to VMware Cap IQ Tool but I wanted to know about this deployment tool requirement: -.

  (1) we have about 200 ESXi host

  (2) 2700 VMs

  (3) cost factor

  (4) how long it will take for the deployment

  Requirment 5)

  Anything else to consider that i missedout.  Any help on this will be appreciated. I introduce the deployment report before buying.

  Thank you

  VMG

  Cannon 1.5 is compatible with vCenter 4.1 U2. Capacity Planner is used to perform analysis of existing data centers to correctly estimate how to determine the ability of a new virtual infrastructure. Caron works with virtual existing infrastructure to maximize the investment in your current hardware and make what if scenarios.

• XP Service Pack 3 VDI model - deployment use and Windows XP Service Pack 2 deployment tools?  VMWare View, virtual center of customization specification Manager.

  I'm setting up a VMWare View deployment and I need to configure Performance Manager in Virtual Center Customization Tools.  Use the deployment tools XP Service Pack 2 for my model pack 3 XP service or do I have to download SP 3 tools?  Documentation on the internet points to SP 2 tools, but I can't find a definitive answer for XP SP 3 machines.

  I don't think anything changed in Sysprep between XP SP2 and SP3 of XP.  I use Sysprep in an XP SP2 CD deploy.cab file to customize my XP SP3 image with no problems.  You should be able to use Sysprep tools on the CD for SP2 for your model.

• deployment error: unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.

  Hello world

  I want to deploy my project Teststand and got a strange error when creating the image.

  For many additional files with the suffix as .tso, alias, lvlpb, exe, dll... deployment tool launches the error message "unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.» (see also the attached picture).

  If I exclude the files of my distribution or set them to "include without treatment or dependencies of elements of" the generation works fine.

  After the error, I checked the Temp folder. The temporary project LV is not yet created.

  I used the deplyoment-installation in the same way within a fromer project and had no problems like that...

  I use Win7 / LV2013 SP1 & Teststand 2013 f1 (5.1.240).

  Could someone help or support? Thank you!

  Finally, I tried the construction with LV2015 & TS2014 - no problems... Everything works fine...

• deploy the run-time engine

  Hello everyone,

  I'm trying to deploy my application of teststand to a target computer. My teststand application uses: TestStand 2014 (32 bit), LV 2014 SP1 (32-bit).

  Here's the problem I encounter while using the deployment tool.

  1. in the attempt to include RTE LV in my Installer, the deployment utility requires that I provided LV 2015 Installer. See the attached picture.

  I wonder why she asked median LV-2015-64 bit Installer. If I ignore the request, the build process failed.

  

  2. I use the shared variable to communicate with the compactRIO controller. The compactRIO controller is hosting EVS. My question is,

  a. I have to "deploy" my variable library shared, even though my system is not an EVS?

  b. I read in the manual that I can deploy the variable Fanny shared through the LV utility deployed the lilbrary step. So I added this step in the test sequence. Whenever I run the sequence, this step deploys the shared variables. On the target, I wonder if it is necessary to deploy the shared variable on each run of the test sequence. I think it should only be deployed only once on the system target. Am I wrong? If so, how to remove this utility LV deploy step of the library of the test on the target sequence, since there is no development testbed on the target system.

  3. I use a database to record test results after each execution of test sequences. I can export the schema of the table data and copy it to the target computer. My question is, how to import the schema of the database in the target table, since there is no system development teststand on it (no way to call configure it-> result-> database to import the schema of the treatment table)?

  I hope that teststand experts out there can give me some help tips to help me understand the whole deployment process. Thank you.

  Yours,

  lhuckj

  (1) make sure that LabVIEW 2015 Run time is NOT slected to install options-> drivers and components

  (2) I don't know

  3.

  Generally, I put my data link in a UDL file and include that in my distribution.  I set the Connection string to use a relative to this udl path and make sure that the UDL is copied to the same location on the targer

  I have also included in my repertoire of the Application of TestStand CFg:

  TestStandDatabaseSchemas.ini

  TestExec.ini

  Users.ini

  StationGlobals.ini (attention if you do not want to replace the existing one, I use it to store the addresses of the instrument)

• TestStand performance is slow after deployment.

  Hello.
  We have created a TestStand sequence using labview mainly vi code modules. The test sequence is over and is running as it should be in the sequence editor.
  After that I used the Deploument tool to build an image that could be moved a production PC, something went wrong. The test sequence always starts and it looks good, but enforcement is extremely slow!
  It doesn't matter if I run on the production of PC or on my computer (where the sequence has been created). I can run the sequence of the location of development and everything is ok, I then close the sequence and load it from the situation created by the deployment tool and it runs slow...
  It's not because the speed of tracing is set to slow down, and it seems to be the vi "s themselves that run slowly. Almost as if "highlight the execution" is on.

  Any idea what's going on...?

  Best regards
  Stephan.

  Hello Anand and thank you for your response.

  I just find the answer to my problem yesterday.

  We have a vi logger that is used during the development and debugging, and it is meant to be disabled afetr the build - it wasn't.

  The logging feature uses a VI server that it has not found after the build and then exceeded several times - causing the slowdown.

• Problem with my file in the SupportVIs directory found deployment package and not the Destination directory specified

  I have a little problem with a package of teststand.  I wrote a few screws to provide a wrapper around a custom DLL to provide the error handling. These screws use the following call library functions as indicated below.

  

  After installing my application, some of my screws are my DLL custom in the correct destination directory and other parts that are in the Directory Support screw which creates the deployment. The problem is that the DLL must be installed in a specific directory, because it uses the other files that are in this place-related directories.

  Currently I work around this problem by running the installer, and then manually delete the DLL to the folder of the SupportVIs dirctory.

  Does anyone have any suggestions on how to fix this?.

  

  

  Hey,.

  So, what seems to happen, is that your VI sees that DLL as a dependency and wants to keep with her VI.  I can't find a way to the deployment tool to do what you ask, however, here are two ideas that could solve your problem in other words.

  Do you need to have your DLL in the precise place?  If this is not the case, why not in your VI on your call library function, check specify a path on the chart.  Then, on your diagram, you generate a path relative to the location of the VI.  In this way, it's okay if your DLL is located in the support of screw

  Another idea would be after that installation is created, you can create a batch file that runs the installation and then automatically delete the DLL support VI place.

• Use of the standards of construction for TestStand deployment target

  Hello world

  I currently use an Internet Toolkit OR in one of my VI to build a module of code for TestStand.

  The question is which target the deployment of doesn't have the NI Internet Toolkit.

  So I would like to build the way to the deployment target VI would not need the Toolbox for the use of the VI.

  Did someone knows a way for that?

  Thank you all...

  With the application builder, create a dll. Your other options is to buy the box for each deployment tools or do not use the Toolbox.

• Deployment utility and Labview Modules

  Hello

  I'm relatively new to TestStand. I created a TestStand sequence that calls a number of modules of Labivew. Everything works fine on my development computer.

  I'm deploying to another computer running a development basic license. I ran the utility of development and created one setup.exe which I just installed on machine 2.

  When I go to run my test on machine 2 sequence, it cannot locate the modules labview called in the test sequence.

  So my questions are:

  1. Can TestStand to deploy these files for me or do I have to do it manually?
  2. If it is possible, is there a specific folder, I would store all the failet of labview on my development for the deployment utility machine, picks them up?
  3. Is there an option in the deployment utility that I have to settle for TestSTand pick up these modules?
  4. There is a special option that I should set in the movie file? Search box?

  Thank you best regards &,.

  Don1.

  Hello

  You should be able to see the LabVIEW VI in your deployment tool. If you can't then this is why you don't see them on the target system.

  Do you use a TestStand files work/project space?

  

  Concerning

  Ray Farmer

• Error on Windows XP with MDT 2010 deployment

  I imported the source files for Windows XP SP3, so I can deploy XP and created the sequence of tasks, but when the system restarts after installation without assistance theres an error in copying the files. When I copy the files to skip the configuration is interrupted due to the main installation of files cannot be found. Can anyone help me solve this problem, so I can get windows xp to deploy with no problem using MDT 2010?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of box to Microsoft deployment tools. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/MDT/

• Can not deploy the build Q10

  Hello. I have difficulties deploying my build for a physical device. It seems to work fine on the Simulator. It is a port from files apk android to a bar file.

  None of these debugging info below seems familiar? No idea why it does not work?

  Thank you

  Kenneth

  Env:

  10.9.2 MacOSX

  Customer 1.1.0.20 | Mix 1.1.0.67

  Command line tools: 2.0.6.201409181326

  feature:

  Q30

  version s/w 10.3.2.2474

  OS: 10.3.2.2639

  Build ID: 857461

  What I tried:

  1 using the BlackBerry deployment tool, I get the error message:

  Error: Failed authentication user
  com.qnx.bbt.deploy.Deploy$ DeployException: error: failed authentication user

  2. via command line tools

  $. / blackberry-deploy - v - installApp-password 1111 - device 169.254.0.1 - package androidapp.bar
  Info: Initialized http client
  Info: Attempt to leave with cookie
  Info: Logging in...
  Info: Response analysis...
  Info: Status of reading...
  Info: Status: success
  Info: Application-Development-Mode is set to false, off sync
  Info: By running the command INSTALL
  Info: Send request: INSTALL
  News: Expired session reset

  A debugging token is not required for the loading of a signed version.  Restart the Q10 help?  You can try deployment WiFi instead of USB?  If it works, try to install the latest version of BlackBerry Link, that will update the USB drivers.

• BlackBerry Deploy result::failure-24

  Hello

  When I use Blackberry deployment tool to deploy the bar file classic Blackberry I get the following error after the bar of the folder we downloaded:

  result::failure-24
  com.qnx.bbt.deploy.Deploy$ DeployException: result::failure-24

  There is no documentation to deploy error codes?

  Thank you.

  I'm glad to hear you got it working.  We have not publicly documented these error codes.  If the installer can determine the cause of the error, you should see a useful error message.  Error codes appear when something external to Setup failed and the installer does not know what happened, that's why they are not documented publicly.

• Exception IndexOutOfBoundsException when trying to deploy

  Hi all

  I am facing a problem when I try to run or debug my app. I made this app in air 1 year ago and recompile with the blackberry sdk (I also integrate some swc libraries that I can't recompile).

  When I try to debug or run that I have an exception message:

  It's questions - bug in Packager - caused by lots of files bundled in your application.

  The work around:

  Do not use the option - airpackager launchApp (or launch of the FB integration options),

  use blackberry - deploy tool (command line), but instead specify package- option, you must explicitly specify - package-name and - package-options id. the package name you need to know (comes from app.xml) but the package id is the unique name generated automatically - you can extract file .bar if you unpack and check the META-INF/MANIFEST. MF for the Id attribute of the Package (also package id is printed on the console when you install the application on the Simulator).

• Can I deploy WebWorks app on several private aircraft?

  Hey! Sorry for the noob question... I'm new on this.

  I developed an application of training, and I don't want to put it on App world. I want to just deploy in about 10 PlayBooks.

  How / can I do?

  Thank you.

  You can use the command-line blackberry - deploy tool provided with the developer tools.  If you want a GUI to wrap the command line tools, try this:

  BlackBerry Tablet OS graphical help

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/BlackBerry-Tablet-OS-graphical-aid/TA-...