TestStand performance is slow after deployment.

Similar Questions

• Why is this performance became slower after reformatted my HP G61 laptop

  What is the problem why my laptop after that I have to reformat, performance becomes slower when I don't use it with the battery, but when I use it with charger execution are fast. My OS is windows 7 Home premium, same OS before I used before as I have reformat my laptop.

  Kind regards

  Hello
  Click on the link below:
  How to speed up system boot time and performance.

• Application runs slow after deployment

  With the help of JDev 11.1.1.6

  I have developed a fairly broad application using business components based on tables of Oracle database and it works very well in the IDE.

  The application has many pages.  Each page queries the database when the page is loaded.  The deployed application runs very slowly when you query the database for the first time.

  I checked the database session and it's not slow it down.

  Are there things I can do to improve performance?

  Are there available diagnistic tools that can pin-point where the downturn occurs?

  Thank you

  Raymond

  Additional information: the application is using page fragments and dynamic flow for navigation task.  Most of the time is between the time you click on the link and the time that the page is traversed.

  It is a normal behavior. By default, Weblogic compiles JSPs on their first use, which takes a while. If you want to precompile JSP pages to deploy in time, you must add the following to weblogic.xml application descriptor:

  ...

   

      true

   

  ...
  

  Dimitar

• Vista running slow after update 11/05/2011 dealing with Outlook 2007

  Vista Home Prem running slow after update 11/05/2011 dealing with Outlook 2007. Now, it takes 30 to 45 seconds to open Outlook, or any program. I'm under IE 9.0.8112.16421.

  The installed updates were:

  Update of security for Microsoft Office System 2007 (KB2540162)

  Update for the filter of junk e-mail in Outlook 2007 (KB2536413)

  Update of security for Microsoft Office PowerPoint 2007 (KB2535818)

  Update for Windows Mail Junk e-mail filter [May 2011] (KB905866)

  Windows malicious software removal tool - may 2011 (KB890830)

  Update for Microsoft Office Outlook 2007 (KB2509470)

  Can anyone help?

  Thank you

  Tony

  Hi Tony,.

  You can try the following steps and check.

  Method 1:

  You can try to run the performance fix and check.

  Check out the link:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  You can also read the following article and try the suggested steps.

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  For more information, see the links:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

• issue after deployment to windows 7. I get the error to follow "the Windows experience index.

  Original title: question after deployment to windows 7.

  I just roll back to windows 7 Windows 10

  the best thing I have ever done in my life.

  .

  Now when I try to run the windows experience index
  I get the follow error
  "The Windows experience index.
  your system could not be calculated.
  before, I update to windows 10

  I don't have this problem
  so, how do I solve this problem?

  Hello

  We appreciate your time and effort to get back to us.

  As the step above did not help, I suggest you to try the steps in the link below and check if it helps:

  Performance Windows ERROR index  

  Experience index Windows error "the windows experience index for your system could not be calculated.

  Let us know the status of the issue. We will be more than happy to help you further.

  Thank you and Merry Christmas to you also.

• Sytem Slow after update

  My system is now very slow after updating my Windows 7 ultimate

  http://Windows.Microsoft.com/en-AU/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Optimize Windows performance

• Get the guest OS unusable slow after a few hours / after restoring a snapshot

  Running an early 2009 Mac Pro with 10 GB of RAM, 2.66 Quad-Core Intel Xeon CPU, OS X 10.10.2. 7.1.1 the merger.

  I have a question where a guest OS I am running under Fusion will get inevitably unusably slow after that it worked for a while. Usually what happens is when I start the system, everything works well, and then after an hour or two, it will start running very slowly. Very basic operations like moving a window all about take a few seconds to complete, and I can see the screen slowly updated the window moves. Another example is by clicking on a menu in the menu bar might take several seconds for the menu even start drawing, and then a few seconds more for what it ends and during this time where the BONE is otherwise unresponsive. Essentially, the interaction of basic with the operating system is very difficult. If I stop the operating system and then start it back up again, it will resume performing normally for another hour or two.

  If I record a snapshot of a system and restore later, usually (but not always) will trigger to poor performance and I have to completely farm the guest operating system and start again it upward to fix.

  This happens regardless of which is the guest operating system. I did experience in OS X 10.6 - 10.9, Windows XP and Windows 7 32 - bit and 64 - bit.

  So far, I tried affecting versions material of these VMs to 10, as was recommended in other threads I've found to fix this exact problem. However, it is not fix things for me.

  Does anyone have an idea, what the problem? I'm quite like merger so far, more Parallels, but with this question, it is very difficult for me to get work done. I hope it can be resolved.

  Thanks in advance!

  I had the same problem since V7 came out.   At one point, from 1 hour to 7 days, all my virtual machines would slow to a crawl.   The only solution was to close all, vmware close and restart.   I spent months to fine-tune different settings.

  I did a few manual tweaks after searching on the net and see some common parameters which have been recommended.   After 4 to 6 weeks, my problem has not reappeared.   I don't know which of these parameters has solved my problem, but you can give them a try.   I don't have an SSD if you may or may not want to use the virtualSSD parameter according to your configuration.

  The settings that I have added are:

  mainMem.backing = 'swap '.

  scsi0:0.virtualSSD = 1

  MemTrimRate = '0 '.

  sched.mem.pshare.Enable = "FALSE".

  MemAllowAutoScaleDown = "FALSE".

  As usual, save your vm and use at your own risk.  They have worked very well for me so far, but each installation is different.

• Satellite A100 - Internet becomes slower after 10 minutes

  Hello

  the Satellite A100 worked well for a few years, the internet has become suddenly too slow after 10 minutes of the start.
  The laptop switched on the first time that the internet works very well the 10 first minutes then becomes slower and slower until almost no packets are received but the connection does not completely down.

  Suspected spyware, rootkit, is cleaning up, and then installed from the disk recovery

  Then I tried the same thing. Uninstalled the connection to the local network and then reinstalled from the Device Manager, nothing.
  I figured that the Ethernet port is a failure. Then I used an adapter usb-to-Ethernet D - Link is completely independent of the integrated Ethernet hardware. Nothing, same behavior, working, first fine then Firefox displays a downtime

  The modem, cable, internet are all very well since I have tested with a PC and a laptop Fujitsu (5 years) and they all work very well. Even the D-Link works fine.
  The Toshiba pc diagnostic tool specifically says "Network Fail", but it crashes exactly?

  An idea or a similar experience?

  Hello

  Hmmmmm... It sounds quite complicated.
  What is with WLAN? Have you noticed the same behavior using the WIFI connection?

• Safari is very slow after downloading the latest IOS on my MacBook Pro

  Safari is extremely slow after downloading the latest IOS on my MacBook Pro. Can we do anything?

  It was very fast.

  IOS is not running on a MacBook Pro. Do you mean that you went to El Capitan?

  When Safari is running slowly? When? What sites? Force Quit Safari and then start it again while holding down the SHIFT key. If Safari works as expected, then remove your installed Safari extensions. Restart Safari normally and add your extensions one by one until the slow back. You have now identified the extension at the root of the problem.

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• How can I run a vi after deployment in a PXI Machine

  Salvation;

  I wonder if there is someone out there who knows how to run a vi after deployment in a PXI from my host machine. In my application, I have a few vi that are deployed in my machine PXI. My problem is that when I'd like any of these vi simultaneously after their deployment. My current approach is to call vi reference and then call-> run. However, since there vi is deployed from a host, and they run in the PXI machine, I don't know how to reference vi with the constant path. In other words, how can I find the path to my vi after deploying PXI host machine.

  Best regards

  When the screws are deployed on a controller real-time PXI, they are usually copied into a C:\ni-rt\startup directory on the controller.

  Usefully, this article talks knowledge base on how to specify and start programmatically screws on a real-time controller.

  I hope this helps.

• Restart of the force after deployment

  Hi all

  I'm developing an application with JDE puglin for Ecplipse (api 5.0, 8520). Can I know if is restart possible force (the same as alt + caps + delete) after deployment?

  I want to do it because I have to register a listener at the start (i.e. when ApplicationManager.getApplicationManager (.inStartup) is set to true).

  Thanks in advance.

  Kind regards

  Gianni.

  I found that may not force restart but, if necessary, automatically invited to user if reboot the device. Then, maybe, he's wrong my startup... I ask the Java development.

  Sorry for the misunderstanding.

• my computer suddenly slowed after full HDD

  my computer slowed after the drive hard but I have a lot. then I deleted some files to create enough space. After you delete the files, it works well after starting, and then slows down after a while. Help me please

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

• RESPONSE VERY SLOW AFTER THE START-UP OF THE PC.

  My PC has become very slow. When I start my all right, but
  When the desktop I have to wait at least 7-8 minutes before updating it the first time.
  If I don't wait and refresh it just after the start and then very slow after clicking answers, then after
  sometime, windows Explorer stops working and I have to restart my PC.

  I don't know why this problem is ancestral. I thought before formatting my PC and heal
  I ask you all if you have any solution.

  I tried all possible measures such as:-1. using the system configuration to stop unnecessary programs from startup.
  2 using the Disk Defragmenter.
  3 using CCleaner to remove all files of PC unnecccessary.
  4 using the KASPERSKY INTERNET SECURITY 13, I scanned and found 0 THREATS.

  I have 320 hard drive with two local drives: 1. (c) 17.5 GB free 99.9 GB;
  2 (D :)) 27.4 free GB of 198 GB.)

  System information: -.

  -------------------------------------------------------------------------------------------------------------------------
  Operating system: Windows 7 Home Basic 32-bit (6.1, Build 7601) Service Pack 1
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: G41M-ES2L
  Processor: Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz (2 CPUs), ~2.9GHz
  Memory: 2048 MB RAM
  Available OS memory: 1916MB RAM
  Page file: 1385MB used, 2447 MB of available space
  DirectX version: DirectX 11.

  Please HELP me ON THE above of PROBLEM as SOON AS POSSIBLE! I have!

  Thank you...

  Yuvraj

  This Jetta post may be of interest:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-make-Windows-7-32bit-into-64bit-with/5b4581fc-2e68-49A0-a529-28257d00e069#LastReply

• where the application is stored in the weblogic file after deployment?

  Hello, I am beginner of WebLogic Server12C.

  I deployed a project of console gui war. However, I can't find where the expansion.

  I can find. "" appmergengen folder "and"_WL_user folder"in the tmp folder.

  They exploded Archive Directory. However, they are in the tmp folder.

  So could you tell me where the application is stored in the weblogic file after deployment?

  I find no specific document of the oralce site documents.

  The application that you deploy to weblogic may be placed under a folder tmp only under appropriate weblogic server instance i.e. Managed server / Server Admin

  It will be cached in the exploded only form and not in WAR or archived form.

  Hope that clarifies!

  Thank you

  Vijaya