Deployment tools from VMware Cap IQ requirment.

Similar Questions

• XP Service Pack 3 VDI model - deployment use and Windows XP Service Pack 2 deployment tools?  VMWare View, virtual center of customization specification Manager.

  I'm setting up a VMWare View deployment and I need to configure Performance Manager in Virtual Center Customization Tools.  Use the deployment tools XP Service Pack 2 for my model pack 3 XP service or do I have to download SP 3 tools?  Documentation on the internet points to SP 2 tools, but I can't find a definitive answer for XP SP 3 machines.

  I don't think anything changed in Sysprep between XP SP2 and SP3 of XP.  I use Sysprep in an XP SP2 CD deploy.cab file to customize my XP SP3 image with no problems.  You should be able to use Sysprep tools on the CD for SP2 for your model.

• Adding tools from VMware to Virtual Appliances

  I have virtual appliances in my environment of different suppliers.  They are mainly the devices of SUSE Linux vendors such as backup software or control solutions provided .ovf format.  Some of them do not come with VMware tools.  When a seller of customizes a Linux OS to make a .ovf model, but does not add the VMware tools, are there situations where I should not try to install VMware tools?  It is normally safe to try to install the tools?

  Hello

  as usual, the installation of vmware in a virtual appliance tools is recommended.

  Check the "virtual machine configuration" section of this PDF on virtual appliances best practices:

  http://www.VMware.com/files/PDF/vam_best_practices_building.PDF

  Best regards

  Pablo

• VSphere Upgrade (Tools from VMware and Virtual Hardware on Windows clients)

  When you perform these upgrades, there are things to be aware of that are not visible or in any documentation for VMware, I saw. I created an overview during my upgrade, so I thought I'd post it here.

  Thanks for the information, write well.

  I would like to add to the list of traps - my point of view is on one side of Windows.

  1. If you use VUM updgrade tools or hardware, check that the client is configured to support suspended snapshots

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1007696

  2. If VUM can upgrade tools, but not the material, turn off comments, and then try to upgrade the hardware of the v4 to v7

  3. the upgrade VUM method seems to work well if you have a single network adapter.  We had trouble with several NETWORK cards and NETWORK load balancing.  Due to the hand reconfiugre.

  4 NETWORK GHOST who are left cards account contain their original network configuration.  This can be useful to check the configuration of the new interface.  NETSH to view the configurations on GHOST interfaces.

  netsh interface ip show config "Interface name".

  5. in regard to the lost NETWORK GHOST cards, and WINS settings I wrote a script to help.  The script is a batch file and use devcon;

  http://support.Microsoft.com/kb/269155

  The script is provided as-is.  Use at your own risk.

• VPostgres from VMware vCenter app 5.0 U1b

  Hi guys

  I would like to know if this VMware vPostgres database which now replaces DB2 incorporated inside of vcenter 5.0 U1b has the same boundaries as the embedded DB2 and SQL Express?

  or 5 guests and 50 VMs limit has been removed using this new DB from Vmware?

  Thank you very much

  From the management perspective, it seems to have changed. See download and deploy the VMware vCenter Server Appliance

  André

• Custom ESXi from VMware ESXi vs Dell

  I'm trying to consolidate all our servers (P2V). My question is what distro ESXi should I use for my VMware servers or Dell custom? We currently have vSphere Essentials and yesterday 4.0 Update 2 is out. What will be my most safe/reliable and recommended approach.

  Material:

  2 x Dell PowerEdge R510 (ESXi via USB)

  1 x Dell PowerEdge 2850 (vCenter)

  Current options:

  (1) use 4u2 ESXi and vCenter 4u2 directly from the VMware site.

  (2) use ESXi 4u1 (Dell customized) and 4u2 from VMware sitevCenter. (the ESXi Dell 4u2 is not available)

  (3) use ESXi 4u1 (Dell custom) Dell site and 4u2 from VMware sitevCenter.

  (4) another idea?

  Thanks for any help!

  The version of Dell has the right ICD (but the vanilla version works as well) and the ready to run Dell OpenManage.

  You can add this tool later or boot from the Dell U1 version and use VMware Update Manager to upgrade to the version of U2.

  André

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• I have updated to IOS 9.3 and cannot always disconnect from iCloud, because it requires a password to an old apple ID

  I have updated to IOS 9.3 and cannot always disconnect from iCloud, because it requires a password to an old apple ID

  You provide the password in order to log out.

• Script Web deployment tool

  Hello

  does anyone know if there is a way to install script and - configure the MS Web deployment tool?

  Installation seems to be possible.

  Config is quite difficult - at the moment we are struggling with the IIS for 'Management Service Delegation' parameters.

  Is it possible to define the Type of identity by script?

  (e.g. setAcl, createApp, backupSettings - see screenshot)

  

  Thank you

  G

  Hello

  Please post your question here for assistance:

  https://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Is a tool from microsoft that checks for viruses that actually works

  I tried to use mrt.exe and the new scanner from microsoft that is the safety scanner and I used Security essentials but was not able to find the virus on my computer and when I try to manually search on the appdata and the virus was there. Guys can you like recommend me some of your tools from microsoft that can check for the presence of virus, it will be really meant a lot

  I get my infected computer all the time on purpose (practice remove infections) and I can tell you right now with100% certainty that Microsoft's tools are often too weak to detect even some of more common conditions of system and subsequently will not be able to delete them.  I don't even use Microsoft tools more for anything - I don't have time to waste.

  'Fair' note Microsoft tools and but lack many things that other applications will be prevent, detect and resolve.  Some applications are more aggressive and quarantine (effectively delete) critical XP system files, resulting in a scenario without boot (it is usually because definitions are out of date) so that makes these situations an error to the user (not the fault of the tool).

  No single analytical tool seems to know everything, so it is prudent to use more than one.

  Microsoft is not in cases of prevention, detection or removal of malware - that aren't their specialty.  There are other companies where the removal, prevention and detection of malware is their specialty and that's all they do all day long.

  Why are we expect or ask Microsoft to surpass in the areas where it's not their job?

  When Microsoft tools fail or if you even suspect that they might have missed something, I always start with the free MBAM and SAS versions because they are free, install any boot on your computer and they uninstall cleanly if ever there is a need to remove them (there is no trace).

  Just start with MBAM and SAS first, and you will not waste any time trying things that might work maybe sometimes from time to time.

• Computer asks me if I want to run Microsoft Windows remove tool from malware at c:\windows\system32\mrt.exe/R/RE

  Original title: rmt.exe file

  Windows always autometic update my computer when I turn on my computer. Today, something new happened to me. When I started my computer, the system asked me if I want to run 'Software removal tool Microsoft windows maliciay' to 'c:\windows\system32\mrt.exe/R/RE '. I did not know if run because I'm not sure whether Microsoft or not. I checked this directory on my computer, and I have this file mrt.exe 54353kb with the current date. also a mrt.ini file.

  It is a microsoft file that I can run safely, or it is a virus file that could damage my computer?  Help, please. Thank you!

  Hello

  Microsoft has released a removal tool from Microsoft Windows to help remove software malicious common specific malware on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP.

  You can see the article for more information about Microsoft Windows Malicious Software Removal Tool.

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

  http://support.Microsoft.com/kb/890830

• New (?) Patch Windows 7 can break up from VMware

  I have no idea if this would affect any of us, but for those of us who run Windows 7 and using the Simulator, there is apparently a fix for Windows which can break up from VMware.

  I never put my automatic update machines, so I'm covered for now, but if you have updates automatically applied, take this into account and if you notice new problems, you can try to do a restore to cancel the patches.  Or wait to see if any other information comes to this subject.

  It is not only related to VMware View software? I read the article and it doesn't seem to affect VMware player, doest it?

  In all cases, the VMware article on which already points to an update.

  See you soon

• How add/remove tools from the dock of the workspace?

  I'm new to the cloud to create Adobe. I wonder how I can add/remove tools from the wharf of the workspace? Specifically, I need to add the text options frame vertical Justification on the top of the dock page.

  Check the control panel personalize

  

• Migration from VMware to USB RAID array

  Current configuration: HP N54L Microserver, P410 RAID card, 3 partitions, each 1 VMware datastore.

  VMware runs from a USB, installed from VMware-ESXi-5.5.0-1331820-HP-5.72.27-Feb2014.iso.

  Datastore1 contains virtual machines.  Datastore3 contains a data reader to one of the virtual machines.  Datastore2 is not used.

  Can I install VMware for a current HP specific image to the partition currently containing Datastore2 without losing my VMs on 1 and 3 data warehouses?

  Thank you!

  Oh now I understand! Logical drives separate are separate as readers for ESXi (and any other OS). So if you take the right one for ESXi, the last two must remain intact.

  I did this once (two logical drives on raid-controller) simple installation and did not know what is happening, so I backed up all virtual machines off site. But only the logical drive that I picked up for ESXi installation has been re-partitioned.

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.