Installation of HP DJ 3050 a print margin does not match the word page layout

Similar Questions

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Final print size does not match the view screen.

  Hello

  I have problems to make my final prints to match the screen display.  Recently, I had this problem: I have an image which is of size at 5 X 7.  I have it on a 5 X 7 model in the Lightroom print module.  The dimensions of the image in Lightroom say 5 X 7.  I have printing on 5 X 7 paper (I actually measured it to be sure).  ON the screen, they look perfect, corresponds to the templates and measure fime with leaders at the screen.  Without fail, a part of the print is cut on final printing.  Along side printing is the most affected.  It is not only limited to 5 X 7, it happens in all areas.  Is this a common problem or I'm I have something wrong?  In the 5 X 7 example above the impression comes from 5.2 X 7.3 give or take.  I use Lightroom 5.3 on an iMac running OS 10.9.1.  The printer is a Canon Pro 100.

  I look forward to help with this.

  Thank you

  Joe

  If the problem is that the printed image is proportional to the largest, it is a very common side effect with the mode parameters borderless print drivers. In general, (although sometimes you can avoid this where alternative options without borders are given)-edition special unrequested % scale ensures that any physical wrong registration or the inaccuracy of the size of the paper, does not allow accidental white edges.

  It's nothing to do with the end of LR in the process, as appropriate.

• Paper size error: paper selected in the printer driver does not match the study

  HPofficejet 7500 E910

  don't know what you mean

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.

  Hello

  I'm not able to uninstall Skype on my laptop which is having windows 7 OS.
  It gives below error.
  The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.
  He appreciates if there is someone to support for this issue.
  Thank you
  Sandesh

  Hi Bader,

  Thanks for the kind reply. In fact before checking your response, I checked in my system there was the .msi from the Skype software installation file was missing. so I installed the same version installation file and then uninstalled the software.
  And I have installed the latest version of the Skype software.
  Thank you
  Sandesh

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 5532 ENVY printer display does not exceed the setup button

  Hello

  I just bought the above printer and tried to put in place. I had it works from a windows vista PC if the functionality is all ok, but the screen on the printer itself will not move beyond the screen saying "retail demo" on the lower left and "set" in a blue box on the lower right.

  By pressing the blue button "setup" does nothing. Etc, rebooting I tried, but everything goes back to this screen. Linking the different tools of diag HP PC says everything is fine.

  I ran http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe who got the printer on the network correctly, but does not mention the error of the screen.

  Is there a way to reset it, or does go back to the shop?

  Good morning,

  I would wear the printer to the store and exchange for another.

  Kind regards.

• Printer settings do not match the settings of document. Page orientation and size settings do not match the page size and settings in your document.

  I have updated from Windows 95 to Windows XP Home Edition, after that my hard drive crashed on my old computer. I had a rarely used, but more recent computer wiped and had XP reloaded with works for Windows 95.  Whenever I have print in Microsoft Works 4.5 of the window, I get the 'documents and settings of the printer do not match. Size and orientation of the page for your printer do not match the settings in your document and the size of the page.  Looks like there will be a simple way to solve his problem. Please notify. I am able to print. But after 3 weeks of this message, I final received a fatal error of Microsoft works just after printing. I think it came from this problem. Not sure. I'm not a technical person. Please note the computer I'm talking doesn't only do not have access to the internet.

  You have posted to a group of win7, but seem to be using Windows XP

  There is an article about this err, usually caused by the used printer, especially Epson printers drivers

• Network printer installs and shows also ready to print but does not print.

  I tried these last days get my network printer after getting a new laptop from work. I have the printer connected to my desktop running vista 32 home, my laptop running windows 7 Home premium 64-bit. I can detect the printer when you add a network printer, very well, I installed without error, the printer indicates as being ready to print.

  When I try to print a test page, I get an error saying that the test page does not print, and returns me to the resolution of the problems... that found no problems. I'm able to share files between two thin computers and the printer works fine from the office and by other computers on the network.

  I tried to uninstall the printer and reinstalled, I've updated the drivers of HP, restart both computers. I have read other forums that suggest you add as a local printer, however, I put the name of exact port showed when detected as a network printer, and it does not find anything.

  I am really struggling to find a solution and I really need to be able to print from my laptop, so any help would be much appreciated.

  Thank you

  Fran x

  Hello

  As you say that you are not able to print the Test Page, it seems that the printer is not connecting to laptop with Windows 7. You may need to reinstall the printer and try to add ports manually during the installation.

  Also, follow the link given below to solve printer network problems.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It is an article of Windows Vista, you can always try the suggested steps and check if that helps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 4630 printer does not recognize the custom page size

  I print a lot of thank you notes, which are the size of page 6 x 9, and the margins must start lower than the middle of the page. The problem is that the printer won't let me in the custom page size, rather it wants to print A4 size or format card index or one envelope size. How can I make the printer recognize the format of the exact page?

  Hi Scubaluvyand thanks for getting back to me!

  I recommend the rest of this paper on create paper formats in Windows 7

  Please hold me!

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• I have changed ink in my printer HP F380 and now it does not scan printing and does not copy the computer off

  Also, I did a restore and do not know if something needs to be installed or reopened.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows