Design of dashboard Exchange

Similar Questions

• Design for MU - Exchange centralized, distributed to the unit question

  Here's the situation. Please let me know if I'm understanding correctly.

  Two centers of data, Europe and CONUS, centralized Exchange servers to support remote offices. Most remote sites in Europe have the average response time ~ 150ms, but AsiaPac is on the order of ~ 300ms.

  Each remote office would get a manager calls and a local system of the unit. The unity system would be storing voicemail in case of failure of the connection to the data center, give language-specific greetings, etc..

  If the link between the office and the data center is in place, then the machine of the unit will then send computers virtual to the Exchange Server, which would then put the virtual computer in box mailbox users.

  If the link does not work, it will store voicemails. Users will always be able to get new VM messages since they will be on their box of the local unit.

  Users will be able to listen to the old VM messages if they are configured to download e-mail on their local machine since at this time, it's just another email.

  I've been through the design guide and want to ensure that I understand that this is not a recommended solution? None of the offices have a local Exchange Server. The latency is going to be a deal breaker for a deployment of UNIFIED messaging?

  It would certainly not be a supported configuration. The unit must me on the same LAN as the server Exchange, MS, GC. Communication between Exchange and the unit is very sensitive to time and cannot tolerate delays or package loses all. Just me that you plan now flat will not work.

  So in this model, you will need to have the unit in the data center or choose a VM solution. With the servers in the data center, they would register in CM over the WAN, but you would need QoS are configured for voice traffic. But in the case where the Wan came down people would not be able to get to voicemail.

  The other option would be for you to have the CM and the unit in the data center and use SRST at remote sites:

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd62348

  I know have enough details to know if it will work for you, but you can check it out.

  Thank you

  Keith

• Dashboard Exchange

  Hello
  I have 4 dashboards
  as MonTableauDeBord, CSM3, CSM1 CSM2
  How Exchange as MonTableauDeBord, CSM1, CSM2 - CSM3
  
  
  Thank you

  Hi reda,.

  Follow this link

  http://oraclebizint.WordPress.com/category/Obi-EE-plus/page/8/

• Design of dashboard page

  I'm designing a page go. The dashboard page will have 3 columns and in total 5 report of the regions. The first column will be two regions with size 200 x 200, width and height. The second column will be a parts with dimensions 200 x 400 in width and height. The third column has two regions with size 200 x 200, width and height. I have created areas in 3 columns, but do not know how to set the width and height of these regions so that align correctly. all the ideas are really appreciated.
  
  Thanks for your help,
  Surya
  
  Published by: sgodavar on March 25, 2010 15:09

  The dashboard page will have 3 columns and in total 5 report of the regions. The first column will be two regions with size 200 x 200, width and height. The second column will be a parts with dimensions 200 x 400 in width and height. The third column has two regions with size 200 x 200, width and height.

  I have create a sample page on the site of the APEX. Basically, I am currently having column 1 and column 3 regions of the same size, regardless of the content in the regions with scroll bars when the content is larger than the size of the region.

  I made the following changes to achieve this goal:

  1. create a new model in the region for the regions of dashboard:

  
    
  
      #TITLE#
    
    
  
      
  
        #CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#
      
      
  
        #BODY#
      
    
  
  

  (if you do not have buttons in these regions, the t20ButtonHolder div can be removed).

  2 assigned static region ID for the regions of dash: dash-1-1, table of edge-1-2 (i.e. line-column) to use as CSS selectors.

  3. Add the following embedded style sheets to the header HTML page:

  Note there is some funny in here - numbers developed according to the box model (http://reference.sitepoint.com/css/boxmodel) to take into account the size of the region headers and padding and margins added to the various elements while still respecting the specified dimensions (it's a bit more vertically to leave a small gap between the regions in columns 1 and 3). And of course a hack from IE to deal with its broken box model.

• To an existing dashboard, how can I go back and discovers the source of data for the items in the dashboard? More precisely to determine why the data not displaying on the dashboard for a host where the agents seem to work fine.

  Here are the servers in the cluster.  The active cluster in the attached image is PrdERx2.  The zeros should have a count associated with them equal to zero.

  Thank you

  Barry

  Hi Barry -.

  If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.

  I hope this helps.

  Robert

• How do I get the dashboard by default when users connect

  Hello
  
  
  
  I have 3 users and and I designed 3 dashboard.
  
  
  
  Let's say that User1, User2, User3 and Dashboard1, Dashboard2 and Dashboard3. If user1 connects by default, it can get dashoard1 and if User2 connects by default it can get dashboards2 is, how to get there.
  
  
  
  Thank you
  
  Malli

  Hello
  Steps to follow:
  Default dashboard for all users.
  * 1. Created a block of init session *.
  * 2. Source of the data used in select ' / shared/SH Test / _portal / Test1 ' double 3. The value assigned to the variable session CHEMINPORTAIL 4. In presentation services > Administration > my account > default dashboard must be set to "default". Then only the dashboard specified in block init will appear otherwise my account will override the init block.*
  * 5. Save the changes to rpd.*
  * 5. Disconnect and reconnect to see if it works well. It works perfectly fine.*

  For more details, please see the document of CSG replication. But this is for all users.

  If the customer wishes to have a user/group basis homepage.
  * 1. They may need to have 2 separate tables.*
  i. Group_path_tab with 2 columns. Group_id, portal_path have group wise path portal for all the groups ii. The card user group table Group_id, groupname, user_id

  The user should be part of a group.

  * 2. Then in the writing init bulk sql must be something like that *.

  Select A.portal_path in the Group_path_tab A, User_group_map B where = B.user_id: USER and B.Group_id = A.Group_id

  SO, based on the USER session variable, it will try to identify the group, and then the portal_path.
  Finally, set this value to the session CHEMINPORTAIL variable.

  Example:

  Please see the below a... it will be very useful to set the homepage to be different on a per user/group basis

  http://varanasisaichand.blogspot.com/2010/09/default-dashboard-using-portalpath.html
  http://total-bi.com/2011/01/OBIEE-11g-change-default-dashboard/

  That is to say:
  Init block

  Select ' / shared/AFS/_portal/GPC AFS Reporting "of the double
  Objective variable is CHEMINPORTAIL (this is CASE-SENSITIVE)

  "/ shared/AFS/_portal/GPC AFS Reporting."

  Finally, it is to be like this

  real (earliar one)
  http://w01sgpcbiapp1a:9704/Analytics/saw.dll?dashboard&PORTALPATH=&/shared/AFS/_portal/GPC AFS statement
  After the call to the default:

  http://w01sgpcbiapp1a:9704/Analytics/saw.dll?dashboard&PortalPath=%2Fshared%2FAFS%2F_portal%2FGPC%20AFS%20Reporting

  Thank you

  Deva

  Published by: Devarasu on October 6, 2011 12:38

• Based on the user dashboard sign on

  Hello
  
  I have to design a dashboard page that loads based on Department and users. The modules is in a table, the table has two columns, username and the Department.
  
  NOTE: There must be a dashboard page, but the content must be different depending on the user that connects.
  
  Department of user name
  User1 sales
  User2 sales
  The util_3 sales
  ACCT user4
  USER5 Acct
  Utilisateur6 Mktg
  USER7 Mktg
  
  .....
  
  How to start this project? Help, please.
  
  Thank you.

  Hello
  Create groups based on departments to the RPD, to groups such as sales, accounting, marketing etc... Assign users to specific groups (this means Department underspecific users). Create these groups in the web under manage Presentation catalog groups and users.
  Now, create a page with section per group.
  I mean
  Section1 - sales
  Section 2 - accounts
  Section3 - Marketing
  etc...
  I mean applying security for sections (section per group) properties of the section-> permissions and give access to a section specific to the specific group (remove the Everyone group) as I mentioned above.
  Now place the tha reports in sections according to your requirement. Sales in the sales section reports, accounts in the section and so on.

  If you want to create a report based on this table (user & dept). Apply security at the level of the table data in the presentation layer of RPD (right click-> properties -? permissions-> Filter tab), the value of dept assignment specific to a specific group, that filters the data in the dept column based on the user login.

  Hope this helps you :-)

  Kind regards
  Srikanth

• Download reports to a dashboard

  In normal reports, you have the possibility to download any report to excel for example. In a dashboard, you have only the option 'Printable Version '. I noticed in the predefined dashboards, that each individual report has a "Download" function, but creating reports for my table of custom edge 'download' or 'printable version' option is not indicated for each report. Does anyone know how to add this feature to my reports?
  
  Thank you
  
  Brent

  Hello, Brent

  I think you will find this option when you design the dashbord and include each in there reports.

  In the design of dashboard page, in the report area, you must click on properties > report links (to middle of result display, view and ask to change). Here, you will be able to specify if you want the update, also printable version and/or download options.

  You will need to do this for each report that you include in your dashboards.
  Hope this helps

  Thank you
  Olivier

• Windows cannot open this file .json

  In joomla 2.5.6, when you try to download an image from the file button I get this error message in Internet Explorer 9 - Windows 7 Professional
  : Windows cannot open this file:

  file: .json joomla (3)
  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look it up automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  Use the Web service to find the appropriate program
  Select a program from a list of installed programs.

  If anyone can suggest how I can fix this I would be very happy.

  Thank you

  P.S. This has happened after calling Microsoft this morning and ask for help with another problem with script. The technician who took control of my computer doing something, and since then, nothing works properly!

  Hello

  Method 1
  JSON is a java file. or JavaScript Object Notation, is an open standard based on text designed for the exchange of human readable data. It is derived from the JavaScript scripting language to represent associative arrays, and simple data structures called objects. Despite his relationship with JavaScript, it is independent of the language, with parsers available for many languages.

  If you want to open. You must have Java installed on your computer the JSON file. If you have java installed on the computer I suggest you to try the steps from the following link:

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2
  I also suggest to run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• How to disable the search in drop-down list control

  Hi all
  
  I'm designing a dashboard with a command prompt. In this message, I use a drop-down list control which I hope to turn off the option "search...". ».
  Does anyone know a way to disable the option 'search' in a drop-down list control, so that users can not find values on the database.
  
  Any kind of help appreciated.
  
  Thank you!
  
  Laurent
  
  Published by: 988334 on 26 Feb. 2013 10:27

  Hi Laurent,.

  You can try the below workaround to hide the option "search...". "on the drop-down list.

  -Click on the dashboard to change where the dashboard prompt is present.
  -Add a text object to the page and paste the code below into it.

  -Check that you check the option 'Contains HTML markup'.
  -Save the page and run the dashboard. This should hide the option "search...". ».

  I tried this on IE and obiee version 11.1.1.6.6.

  Thank you
  Hyder

• Exchange 2 k 3 Cached Exchange Mode Design.

  I have a Windows\Exchange 2003 site that has a design of mail distributed with a DC\GC and Ex server at each location.

  The long-term vision is to move to a design of messaging centralized with the main exchange cluster to Headquarters with remote sites taking advantage of the functionality of Outlook 2003 Cached Exchange Mode.

  In the short term, we will have to implement the unit at each local site servers to support UNIFIED messaging, but eventually they would be dismantled.

  It is a design viable\supported with 4.0 (4) unit for Unified Messaging? I don't know if the cached Exchange Mode is supported in this scenario?

  Thank you in advance, all the tips

  NJ.

  Looks like you're doing the right thing here. You turn the unit off on remote sites now, which is of solid design, and then later as you consolidate Exchange to a central location, you're going to do the same thing with the unit.

  The unit will not talk about 'cached mode' for Exchange, but that's fine. The unit will be able to talk normal MAPI for it even if you have some clients do in cached mode.

  Thank you

  Keith

• I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Oh, I of course put the whole issue in the reference line.

  I'll repeat it here.

  I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Thanks, Thomas

  Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

• looking for google display network "clickTAG" (from google Designer) for my banner animated dashboard

  Hello, im Tom from Poland (www.tomaszrozynski.pl/en)

  I make websites and banners led for a long time.

  Now, I learned Adobe Edge animate to create smooth banners. I have trouble with because Google Display network there is no instruction how to assign clicktags for edge creations animated :/

  This is the specification of google:

  https://support.Google.com/adwordspolicy/answer/176108?hl=en

  And we can see post called "all other ads in HTML5:

  There is instruction to embeed exitapi.js but how?

  I can put adobe edge div like this:

  < div id = 'Stage' class = "EDGE-33699841" >

  in:

  < a onclick = "ExitApi.exit ()" > click here! < /a >

  
  

  ?

  
  

  Help, please. I don't want to use Google Designer because this software is really bad workflow, and I hate it. Adobe edge is simillar to legacy adobe (because we can control different penetration at the same time).

  
  

  Thank you!

  Best regards

  Tom
  

  Fears that he is no longer an admin for this forum because it's something that should be pinned.

  Btn syntax "clickTAG" DCM for Edge

  Window.Open (clickTag, "_blank");

  Add the published HTML file just before and after

  Uncheck the box use this for the edge js file in the publication settings.

  Your files zip after publication.

• Can I exchange a PC of CS5 Design Premium version for a Mac version? Thank you!

  I bought the CS5 Design Premium for Windows a few years ago, but it has ended up to continue working on my Mac in the office. Now, I bought a MacBook Pro and want to swap my CS5 Windows unopened for a Mac version. Adobe do this?

  Thanks for the tips!

  Bob

  No, not for CS5... only for CS6... but you should be able to use your CS5 to get upgrade pricing for the CS6 Creative Suite 6

• I want to Exchange my CS 5 Mac design Standard for PC

  Hey,.

  as my subject says, I'd like to exchange platforms.

  Can someone help me?

  Thank you!

  NumDum

  Order a swap of platform for the Adobe product or language Exchange

  Long story short: you must upgrade to CS6 and make the change.

  Mylenium