Exchange 2010 - moving mailboxes between servers and DBs - that will reduce the size of the DB?

Similar Questions

• I have many windows security updates and are now too much room. Is there a program that will reduce the amount of space being taken up?

  I want to free memory space and have years of security updates to windows of the pak series 3 services. Is there a way to free up space or I will damage the operating system?

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a bigger internal hard drive.   You can move the data to an external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on an external drive, but you can certainly do this by following the related instructions.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
  • See also:

  " How to recover disk space on Windows Server 2008 and Windows XP computers? ."

  " Forty ways to free disk space ."

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application on an external drive, you will need to uninstall and then reinstall it specifying your external drive as the installation location (and even then, it is likely going to install some files on your main system drive).  You can not simply move the files.

• No way to distinguish between failure and normal when to get the document of the UCM?

  Hello
  
  I use the service GET_FILE below to get the document from the Complutense University of MADRID
  
  request.putLocal (IdcService.NAME, IdcService.GET_FILE);
  request.putLocal (IdcDocumentAttribute.DOCUMENT_ID, dID);
  request.putLocal (IdcDocumentAttribute.NAME, dDocName);
  
  and then the output stream:
  ServiceResponse response = client.sendRequest (context, dataBinder);
  InputStream inputStream = response.getResponseStream ();
  
  they work most of the time very well.
  However, in this case, exception that I can't file, rather than receive exception, I always get a steady stream until I got out of the stream as a string, I realized that this is a format string HDA indicating failure.
  
  I wonder if there is no way to distinguish between failure and normal exit without open the output string stream?
  Thank you.

  We expect that the user can download the document so successfully in the form of output stream.

  It's probably a bad support, as you have already seen ;-)

  Is the output as string-HDA when the expected of the UCM rather than throwing exception failure?

  It should be pretty easy parse the real answer to retrieve the status code the system riser. You should not need to open the file to find the error.

  Something like

  response.getLocal("StatusCode")
  

  should tell you if the file has been found. A-16 status code means that the file could not be found. In the case of a successful GET_FILE, it does appear that a status code is still present, so test just for the mere presence of a status code should be sufficient.

• How to extend an AM and what you will extend the AM

  Hi gurus of the OFA.
  
  Please explain how to extend an AM and what you will extend the AM.
  Thanks in advance
  
  --
  Kumar

  Hello

  Please go throughwith below link provied Anil...

  http://oracleanil.blogspot.com/2010/11/am-extension-in-OAF.html

  Regrads
  Meher Irk

• I updated to Firefox 8.01 and confirmed that it is the current version. However, both Google and Firefox do not recognize my current verision - these sites indicate that my version is 3.5.7. Why?

  I've updated (more than once) to Firefox Version 8.01. When I check the Firefox Help: About, it confirms the version number and indicates that it is the current version. Google, however, when I try to use G-Mail or + Google, gives me a message that my version of Firefox is no longer supported (and provides a link to download the current version). In addition, Firefox itself, when I tried to use the help: menu option to submit your comments, indicates that I can't use this option until I first updated to the current version. Apparently, even though I've updated, there are some markers or indicator, which is not updated since a previous version to indicate which version of this browser Web sites is running on my computer. I would like to get this resolved, because it prevents me from doing a few things I want to do. Furthermore, I just watched the dialog below, following the comment "we have made some assumptions about your current browser...". ', also indicates that my current version is the 3.5.7.

  You have a pref general.useragent.override that identifies you as Firefox/3.5.7

  • Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  1. What email program are you using?
  2. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• Connection between servers and opening default home

  Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?

  No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.

  But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• Switch between triggered and untriggered AO: must clear the task each time?

  Hello

  I use August to produce a range of sine values sent several times to help to allow regeneration, with samples finished, that is launched by a trigger. Call it a group.

  One trial involves hundreds of groups. But there are gaps between them where other devices do things. In this gap, I also change the values of the sine table and then restart (awaiting release). I would use just the task Stop and Start Task live for it.

  The complication is that I want the area of OCCUPANCY to a specific value in the gap between the groups, which might not be the last value in the array. I want a way to say: once you have completed the task, do the AO to X sit until you press the trigger to start next. Since I'm on regeneration, I can't just set on the end of the matrix of normal results.

  Is there a way to do this without erasing the task is triggered, creation of a new task untriggered, set the value of the then delete again, creating a new task triggered, ect., hundreds of times she's going around the loop?

  Thank you

  Isaac

  In case anyone else wants to try something similar, you can't actually transition between two tasks, with the same (lines) means using VI DAQmx stop task simply because resources are always reserved.

  Instead, I replaced the task to stop the VI DAQmx control task with action defined as "Cancel". Can I cancel a task, and then start another and so come and go without the need to erase or create tasks every time (the same idea could be used for any number of tasks in the same sense, if I only have two).

  I tested by meassuring the analog output and it seems to work, no error is reported in the code.

• How to choose between A and B roll footage onto the edit screen

  Can someone tell me if there is a way to see two video tracks on display monitor programs. ? I have synced two-piece and want to just see the two videos because they play so I can score and ut on what I don't want.

  HELP PLEASE

  synchronize the two discography as a Multicam.

  The MC Angle Viewer allows to watch "tracks" simultanousely.

  FCPX have no leads...

• How do I use Visual Studio 2010/2013 and the Acrobat SDK kit to create an application that will be the password protect a PDF file?

  I can use some other 3rd party tools that will allow me to open a PDF file, add user passwords and save it.  How can I do that using the SDK?  Looking for a simple solution... Thank you

  OK, so the SDK is a complete non starter because

  -the SDK is to work with Acrobat

  -Acrobat isn't for the server.

  There are Adobe PDF Library, which provides a large part of the plugin API and CAN be used to make applications. Separate issue, DataLogics licenses (individual courses).

• Lottery Microsoft 2010: I received a message from microsoft that I won the lottery 2010... Please let me know if it's true

  I received a message from microsoft that I won the lottery 2010... Please let me know if it's true

  Sunday, October 3, 2010, 10:29:56 + 0000, ramanjeet wrote:

  I received a message from microsoft that I won the lottery 2010... Please let me know if it's true

  These messages are never true. Microsoft does not have lotteries, and
  Microsoft does not send e-mails.

  It is a complete scam. Do not respond to it.

  Ken Blake (MS-MVP)