designated the principal features of name, email etc.

Similar Questions

• Unknown channel or the repeated feature N6700 name

  I use the driver of the IVI - C for N6700 feed (http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=7695). I'm using LabWindows / CVI to create a DLL and TestStand controll it. I've successfully used this driver to initialize, food, values of collating, turn off, then close. However, I am having intermittent problems revolving around the error "name of unknown feature repeated or channels." It occurs randomly on any function call.

  I have attached some of the files that I'm using as a reference.

  Any ideas?

  What happens, in ICB, me is that it converts the char in an integer, is added and converted a tank. So in decimal, '1' = 49, "2" = 50. That's how I came up with what I did there.

  The problem with the formatting of an integer in a tank is the function isn't looking for a tank, he's looking for an array of characters... that is a poor team to string.

  I tried a few diffferent solutions but I get no chance as much as to convert the whole of the chain. A single method, I realized that I still think that should work the following

  Bruno * slotName [1];

  FMT (slotName, "%d", slotNumber);

  But this does not work either, it gives me an error message indicating that it is looking for a ViConstString. This makes me think that I can't pass this parameter in as a variable, the part 'const' yells constant only. If my work just around is going to be to a case statement that resembles the slotNumber int, then hardcodes the '1', '2', '3' or '4 '.

  Thanks for the help.

• How to remove incorrect information in the box pop up that appears when I fill out my name, address, etc.

  Is it possible to modify or delete incorrect information, as wds. has kept in the pop-up box that appears with suggestions for me to use when

  filling in my name, address, e-mail our etc. in web pages.

  Hello

  Welcome to the Microsoft community.

  I understand that you want to remove incorrect information stored in the AutoComplete feature in Windows 7.

  I will definitely help you with this.

  1. which web browser you are using?

  If you are using Internet Explorer Please refer to the link.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/IE-AutoComplete/334f28ff-BA97-4d38-B2B8-fddec6cced85

  Reference link:

  Delete AutoComplete saved information

  http://Windows.Microsoft.com/en-in/Windows7/delete-AutoComplete-saved-information

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• When you type an email etc. Satellite A300 - 16 c jumps to the last page

  Hello

  Can someone help?

  I have an a300 - 16 c.
  This problem is in my head.
  When you type an email etc. the computer jump back to the last page.
  It takes forever to do, I can do?

  Cheers in advance

  catch71

  First, what operating system are you using?

  What the page you mean exactly and have you checked if you didn't push the extra buttons accidentally?

• The printer problem: showing the name of the file: directory: model: title: topic etc.

  Original title: printer problem

  Whenever I have print a page of Microsoft Office or on the web, I have another print page after him the name of the file: directory: model: title: topic etc.  I rang the manufacturer of the product and said it was a Windows problem.  I had rung Microsoft Support and they could not help also and asked if I would like to speak to one of their technicians for $ 75 USD.  As I am from New Zealand it would have cost me probably $100 maybe a little more after the exchange fees and credit cards and not been sure if they would have the right answer.  Is there someone out there who may be able to help me because it costs me ink and paper?

  Salvation of the bones,

  Thanks for posting in the Microsoft Community Forums.

  According to the description, you get additional information when printing a document.

  1. what operating system you have installed in the computer?

  2. What is the brand and model of the printer?

  I suggest you to refer to the thread that the suggestion has solved the problem:

  http://answers.Microsoft.com/en-us/Office/Forum/office_xp-word/a-second-page-prints-whenever-i-print-a-word/7a2286e9-4C1B-4a62-9987-c3b823f03974

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• I was processing the photos and the base on the right feature disappeared (one who has exposure etc) I know see the histogram, and then curve of tones, STL/color/B

  I was processing the photos and the base on the right feature disappeared, which contains the exposure, contrast etc. I now only the histogram, Paint Brush, etc., then it goes to the curve of tone, STL/color/b & W, and all others down for Calibration of the camera. How can I retrieve Basic? Thanks for your help

  Right-click on the header of the tone curve and put a check mark next to the base.

• Is it possible to more a form letter to the recipients identified in a database (names, addresses, etc.)?

  Is it possible to more a form letter to make the process more product separate PDFs, one for each recipient identified in a database (names, addresses, etc.)?

  Or is - it possible to more type a letter so that the more process produces one big file that contains a copy of the form for each letter recipients identified in a database?

  Hi marceepoo,

  If you use Word for Windows, you can of course. See Adobe Acrobat X Pro * create PDFs from Word mail

  Best,

  Sara

• Name email ePrint is returned to the pool of addresses if removed or deleted?

  I just want to know if I delete my x from the web site name, this name will be returned to the pool of available names or it this name now be blown for good?

  Example: Printer name - [email protected]

  If I delete this printer will be the name - handed printerdownstairs use for I can use it again with a new printer?  Or is printerdownstairs gone for good?

  Right. Then, you would be able to use that name again.

  See you soon!

• How to design the oscilloscope... need idea, advice and suggestions...

  

  Hello...

  Student MI... so I'm new to LabVIEW... so I use LabVIEW 8.6 and NEITHER cDAQ-9178 for the connection between the material... and my PC... now, I have final project... I have to design digital oscilloscope using labview, but I have several problem...

  1) How to design the scope of design

  (2) I have the simple design pattern to display the wave... but stil have some problem, this block diagram... how I want to develop the other party such basis of design time, control vertecal, cityscape control, capture the wave... and etc.., I was the previous oscilloscope in labview reserch and I desgin again by reffer the previous... but still no function...

  Hopefully, someone can help me... to give me an idea, opinion or suggestion for me to complete my project... fnl plz... now, I declare my design... and all I recommend and agree with the suggestion of someone... Thank you very much

  Hello

  That must be validated in the jury of LabVIEW so I'll move it for you. The jury of feedback is used specifically to provide feedback on the forums and their features.

  In order to receive the best support on the Forums of Discussion OR, please post your question publicly on the map that best matches the products you use. This allows your question be seen by members of the forum in the world, thus allowing users the most expertise in this field for you help. Additionally, once your issue is resolved, users of the forum with the same question in the future can benefit from your experience.

  To start a new thread on the Forums OR, go to the correct product management on forums.ni.com Board and click on the "New Message" button. You will be directed through a search to see possible solutions. If you don't find a solution, you can proceed to post your question on this Board.

  Kind regards
  Jordan
  The Forum Moderator OR

• Help the unit connection voicemail in email configuration

  Hi all

  I recently did a 4.2 unit migration of Unit 8 connection that went well with the help of some of these people in the forum. As there is always something. Now, I'm running the questions fall my voicemail email accounts.

  As I understand the connection unit will deliver voice messages in two modes:

  1. via IMAP Inbox separately on the users email client.

  2 store on the front, via relay about the unit settings.

  I'm trying the second option. I have configured on the face of the unit connection, the appropriate SMTP domain (example, myname.org) and the name of the smart host (mail.myname.org)

  Tested and I am not recieveing messages in Mail. Is there anything I need to look at the Exchange or the side users of the connection manager or call the unit that I'm missing?

  Thank you

  Dan

  On the server connection to the unit, you don't want the SMTP domain to be the same as the domain of corporate email.  By default, connection of the unit will implement its own SMTP domain... com (for example, hailey.lab.com).  It is not a good idea to set up the domain SMTP overlap with an existing domain.

  To SMTP relay, you must make sure that your host relay (mail.myname.org) is configured to provide relay services and also accepts the relay from the server of connection of the unit.

  For the configuration of the relay, read this blog: http://www.netcraftsmen.net/component/content/article/70-unified-communications/695-voicemail-only-voicemail-relay-and-integrated-messaging-options-with-unity-connection.html

  Finally, if you use the unit connection 8.5 you may exploit the unique Inbox feature which is Unified Messaging (i.e., voice message appears in the Inbox e-mail from Exchange users).

  Hailey

  Please note the useful messages!

• How to design the table from the answer to the question table.

  Hi all
  
  I am creating an application for student review online.
  
  There are two types of questions, the only choice of response and multi choice answers.
  
  My question is less than

  create table question_master
  (
  exam_id number references exam_master(exam_id),
  marks_of_each_question number,
  type_of_question char(1),-- single choice answer/multiple choices answer
  q1 varchar2(2000),
  q2 varchar2(2000),
  q3 varchar2(2000),
  q4 varchar2(2000))

  my table to answer (I'm not satisfied with who is below

  create table answers_of_questions
  (
  answer_id number primary key,
  question_ID number referenes question_master(question_id),
  answer varchar2(4000) not null,
  is_answer_correct char(1),--y/n,
  student_selection char(1),--y/n   student select it or not
  ....
  ...

  now, I'm perfectly how to create the RESPONSE table to contain the answers.
  the only choice is good, but several checkboxes choices, what to do?
  How to design the table from the answer?
  
  do I have to create 2 tables to contain the answers?
  Note: the QUESTIONS and ANSWERS, all will be entered by the teacher. students will make a choice and I will store this choice in another table
  may be called STUDENT_SELECTED_ANSWERS or something like that.
  If anyone has some reference to the script retail scheme review online, kindly share with me.
  
  Kind regards.
  
  Kind regards.

  If you need to have answers in another table:

  Student (student_id, name, etc...)
  Review (exam_id, exam_name, etc...)
  Question (question_id, exam_id, question_text)

  Response (question_id, a_text, b_text, c_text, d_text, a, b, c, d).<-- one-to-one="" with="" question="" table,="" a-d="" flags="" used="" to="" indicate="">
  OR
  Response (question_id, answer_id, answer_text, OK)<-- many-to-one="" with="" question="" table,="" correct="" flag="" used="" to="" indicate="" correctness="" for="" this="" single="">

  Student_Answer (student_id, question_id, a, b, c and d)
  OR
  Student_Answer (question_id, student_id, answer_id)<-- creation="" of="" a="" question_id+answer_id="" in="" this="" table="" implies="" the="" student="" checked/selected="" it="" as="" an="">

  To what extent you want to standardize, it is up to you.

• How can I cancel the "read receipts" on my email account

  How can I cancel the "read receipts" on my email account?

  "read receipts" are a feature of your e-mail account provider service. What is the service you are using?

• Is it possible to restore the previous features of the search box (press F4, first letter, go)? It is so much faster.

  The way the search box has been changed in the new version really slows change search engines. Is there any setting in order to restore the old feature? Be able to press F4 and then press the first letter of the engine that you want done things seriously fast. It was one of the main reasons I stuck with firefox. The same functionality can still be maintained with the new design. Even if I memorized the number of tabs between the search engines in the new system, it would be even heavier.

  Hello, I have suffered from a similar problem with the new search bar type. I found that you can go in about: config, then find the Boolean browser.search.showOneOffButtons and which switches. This should restore the old function. (You may have to restart your browser)

  Note that, as always, change your Subject: config at your own risk.

  credit: askvg.com

• notifications not working not not for messages and emails etc.

  I have phone 6 + notifications for SMS, email, etc. only vibrate does not provide noise went on all settings from another phone work anyway.

  Hello reikiwillie,

  Thank you for using communities of Apple Support.

  I see that you are having problems with the sounds on your notifications. I have a few things to check.

  Although it may seem simplistic, it's often the volume being turned down or the phone is cut. Check the items listed in this article:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker

  Second, restart your iPhone and the test. If it still does not work, try a reboot of the force.

  Restart your iPhone, iPad or iPod touch

  Finally, you can restore your iPhone:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Once you have restored your iPhone and tested if it works you can do restore of the backup.

  Best regards.

• How can I get the command bar, for e-mail, etc..

  How can I get the command bar in Mozilla? For the icon to email etc.

  If you want to learn the basics try this interactive and video tour

  • http://www.Mozilla.org/en-us/Firefox/Central/
  • or the articles of the help/products/firefox/get-started list