Satellite L650-123 - computer lag during the CoD game

Similar Questions

• Re: Satellite L650-165 - blue screen during the video playback or games

  Hello

  In October, I bought my L650-165. However, since then, I was faced with the blue screen of death. This happens when either video playback, streaming video or play Football Manager 2011 (video game).

  I think that my problems are all the graphics card related. However, I am really at a loss. I've always used Tosh laptop computers but this problem starts to grate. I keep coming back to my trusty 5 years Equium!

  I'm not that great with Windows 7, so I would appreciate any pointers or possible solutions.

  Thank you

  Cess

  Hello

  I had the same problem with my a500 due to a graphics card driver. Try to update:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• During the Olympic Games, I put my national flag as a theme of background on my search home page, can't get rid of it

  During the Olympic Games, the option was given to set your national flag as a theme in the background on my homepage to google search. So I have the flag on the top and bottom of my google forward margins. problem is now I don't remember how I installed this and wants to get rid of it. any help would be appreciated, thanks.

  Have you installed a character for the style of the user interface of Firefox or have you set a background for pages in Google?

  • https://support.Mozilla.org/KB/using+themes+with+Firefox
  • http://www.google.com/support/websearch/bin/answer.py?answer=180720 & hl = in -add a background image to your Google homepage

• Computer hangs during the transfer of 16 jpeg files.

  Recently, I replaced my Toshiba Satellite M40 PATA hard drive and reinstalled Windows XP SP3.  Subsequently, I find transfer more than 16 jpeg files (approx. 1 MB each) at the same time causes the computer freezes.  I have to shut down the computer and restart and sometimes the computer is 'always' Hung/frozen after restarting Windows (mouse move no keys, ctrl + alt + delete work does produce no action) which necessitated my stop down and restart the computer again.

  This problem occurs during various methods of transfer-to transfer pictures from my card SD using the scanner and camera or Nikon transfer software, trying to copy and paste pictures from the SD in an empty folder, and the problem occurs even when I try to spend more than 16 images from a folder in another.  I tried to transfer images from a folder with the computer in safe mode and the problem occurs when I try to transfer a little more than 16 images at once.  (my SD card, has about 60 images on that.)  There is no error message or any other message - the computer simply crashes.

  I did not have this problem before reinstalling XP.  There seems to be no limit to the size of the transfer that I could perform. I can't wait to find out how I can remedy this problem.  I am familiar with writing code, check the registry, etc, but I'm good enough following the simple procedures.  Thank you for your help.

  Original title: file transfer causes XP to hang, no error message

  Hi RobertMorouney,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  You have a problem with the computer hung on the transfer of files on Windows XP. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team and try to get this fixed number.

  Method 1-

  Step 1-

  Trying to transfer files in Mode without failure.

  Check out the link-

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Note: Make sure that you get the computer back to Normal Mode after performing all the troubleshooting steps.

  Proceed to step 2, if the problem does not occur in Mode without failure.

  Step 2-

  I recommend you perform the clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Make sure that get you the computer to a Normal startup after performing all the troubleshooting steps.

  Method 2-

  I wish that you run a Chkdsk command on the computer.

  Check out the link-

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265#Method1

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these sectors may be lost. The computer could go to a State no boot as well. Proceed at your own risk.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Satellite A80 - in ODD device with the code 39 error Manager

  Hello

  I have a Satellite A80 127. I have a problem with my CD player.

  When I tried to upgrade my XP Home Edition of XP Pro SP2, display said the restart that he couldn't play in my CD player. During the inspection, I found that my CD/DVD drive is unable to read CDs if it can read the DVD. From what I remember, it was working fine a few days before.

  I tried to locate the source of the problem and with the option of troubleshooting, I found that I have a yellow exclamation mark against my SCSI/RAID host controller in my device (with error code 39) Manager. I could not update the driver it give me an error message. In addition, there was a controller SCSI/RAID of Nero. I tried to remove to check if the main works, but always without success.

  Any suggestion would be great, and in the meantime I'll try to find similar topics.

  Thank you
  knockaert

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=111441 please

  Good bye

• Satellite L500-1ZR - battery died during the first installation

  Hello

  I really hope someone can help me.

  During the first time I started my new Toshiba Satellite L500-1ZR battery died and my laptop turns off. I was in the middle of the installation and now when I start it, it gives a word of warning: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation. "However, when I click OK it restarts and I find myself the exact same caveat. I tried F2 and F12 to see if he had options to do a startup repair and also I inserted a disc on which I downloaded a hardware configuration, but it won't work.

  Anyone got some ideas on how to solve this problem?

  Thanks in advance.

  Hi belisu,

  The advanced boot menu, you can access via the F8 key before Windows starts.
  With the F2 and F12 button, you can access the BIOS menu and start.

  So try to use the F8 key to access the Windows Advanced Boot menu and try to start the Windows repair option. It starts from Toshiba HARD drive recovery and restore settings factory.

  Good luck! :)

• Satellite L650-PSK1EA-06L02F - where are the specifications?

  I'm looking to buy some RAM to upgrade for laptop computer to my father, but Toshiba support page lists absolutely nothing under specifications tab for this model.
  http://www.MyToshiba.com.au/support/computers/satellite/L650/psk1ea-06l02f/specifications

  Can someone tell me how many RAM slots there are in this machine?
  And will be a 32-bit WIN7 machine to use more than 4 GB or RAM (upgrade up to 8 GB).

  Thanks for any information.

  Hello

  Arround search on Google I found the info your computer has two memory slots and you can improve up to 8 GB.
  Compatible modiles RAM, which you can find on - http://www.mytoshiba.com.au/products/computers/satellite/l650/psk1ea-06l02f/accessories

  If possible you schould use 64-bit OS.

• Satellite L650 Initial put in place the error

  Not long ago in the initial implementation of a new of Satellite L650, the error message appeared ERROR: F3-F200-002 with the instruction to click OK to stop, which I did. The subsequent reboot is the same thing, there is no other options,

  How can I solve this problem and he can start the initial installation?

  Hey Buddy,

  You can access the advanced Windows (F8) boot menu?

  If so, you can try to start the installation of HARD drive recovery. Simply choose repair my computer option, then you can choose the Toshiba Recovery option.

• Satellite L650 PXE - E63:error initializing the NIC - error start

  I have a Satellite L650, which is 2 months old.

  The motherboard makes a ticking noise (I think it's what makes noise), and when this noise occurs it causes very slow computer! It has been thus since I got it pretty well.

  Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows. When I restart my computer it runs the windows startup repair 7, found nothing wrong, and restarts the computer. When the computer restarts, the screen stays black for a long time... and then it flashes a blue screen (flash is so quick that I have no idea of what he says) and asks if I want to rerun the repair. I choose not to start windows normally... and the screen goes black for a long time, however there is no ticking noise, but it seems that nothing happens.

  If I force a reboot, I get an error message saying along the lines of;

  For Atheros PCIE Ethernet controller... Check the cable connection
  PXE - E63:error initializing the NIC
  PXE - MOF: exit intel PXE ROM
  No device bootable-insert boot disk and press eny key

  Help, please!

  > Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows.

  Sounds like the HARD drive failure.
  That would explain the PXE Boot error as well.
  This error occurs if the laptop tries to boot from LAN because other sources bootable couldn t be found.

  In my opinion, you need to replace the HARD drive.
  If the warranty is valid, get in touch with a local ASP from Toshiba and ask the new HARD drive

• Satellite L650 - WIFI connection disconnects when the AC adapter is removed

  Hello

  I bought Toshiba Satellite L650 in April 2011 in Canada.It works perfectly well in the Canada, but when I bring the laptop computer in Hong KONG to use, I have found the drops connection wireless lan or completely disconnected very often.

  However, my 3 other laptops in Hong Kong has this problem.

  I have
  -updated all the bio for window and software for the network adapter wireless;
  -deactivate the energy saving level
  -increase the TX power lever
  -the fact that said the following link

  http://support.Toshiba.ca/support/TechSupport/TSBs/viewtsb.asp?docid=TSB001593

  and still does not help.

  It's really frustrating to browse when internet is on and off.

  Could someone please help?
  Thanx
  T

  Hi mate

  I found a few solutions here on the forum and you have done great, but you forgot to update the WLan driver.

  So please update the WLan driver and disable the Wlan to economy settings too much energy.

  I think this should help you solve this problem!

  Good luck

• Satellite A660 - 12 fall down during the update of the BIOS, start again

  Hi all

  I bought my laptop A660-12th in June 2010, and a few months I've been encountering frequent problems of freezing of the screens, stops unsollicitated... so I decided to clean up my computer and update programs the computer base (including the BIOS) with the latest versions available on the Toshiba site, hoping it would be more correctly.

  Then, when it came to upgrading the BIOS. I wanted to do it slowly because I know this is the most delicate point in the update, but I don't know what is happening during this step: program launched barely (and it was the only program running) that it has been already updated my BIOS, and in this special moment my laptop automatically go restarted... obviously I don't have BIOS more because my computer does not start still, the screen does not display anything AT ALL. There is just the noise of the fan and the lights when I turn it on, but that's all.

  I am so very angry to the Toshiba BIOS update program (and also Toshiba), because I feel that I have everything done correctly, but nevertheless this update bricked just my computer.

  Is it possible to get it back, or do you also think it bricked and lost?

  I'm afraid BIOS is dead now and what you need now is a professional help from m.
  I highly recommend you contact the nearest Toshiba service provider, explain the situation and ask for help.

  Addresses and phone numbers, you can find on - http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/

• Why graphic ActiveX lagging during the race?

  I work with GRAPHIC trend ActiveX in a compiled Labview application EXE. An acquisition of data acquired datas 77Hz, a sample at a time, a table displays the last 30 minutes. But I see only 5 minutes of screen. After 2 days, start and stop of trends, 2 (constant) values that are saved in activeX as upper and lower limits of the signal, begins to lag. The main signal of data acquisition is OK but 2 constants appear with 15 s delay.

  After 1 week, 1 minute lag is observed on the screen of the main signal and 2 minutes on 2 constants.

  Why? and how can I fix this problem?

  I use 2 loops with queue for the acquisition and treatment. I use the Quad Core CPU with 2 gig of RAM, and Windows Vista.

  Hello!

  I finally found the problem.

  Even if I was using very good machines, 2 three feathers begins trolling after 1 day.

  The reason is that these 2 signals was set as an Integer, and the other is a waveform. Basic teas time 3 signals is not the same. We take the timestamps of the DAQ signal. The other two use the time on the computer. It seems that the clock two are not synchronized. I rebuilt a signal using the timestamp for the acquisition of data for integer values, and that's it!

  Best regards

• Computer froze during the upgrade/installation of windows xp

  I have windows xp home edition on a Dell desktop computer. I had problems with the computer freezing and then lost the connection to the internet 3 days ago. So I decided to reinstall windows xp from cd. However, I have chosen upgrade, rather than new install (because it was the suggested method). Now my computer will not complete the upgrade but is frozen during the installation. It remains to 32 minutes until the end. I can't seem to start, can't control/alt/delete or whatever it is. If I unplug my computer and launch it then again once, it resumes where it left off. How can I break out of this loop and start over with a fresh install? Thank you.

  OK, it would have been better to have all the information on this machine in one place. I guess your question in the other post you made about activation is for the same computer? If this is correct, then the information I gave you in your previous post is not applicable.

  With Dell computers, using Dell reinstallation media, you don't need to enter a product key during installation and the operating system is already activated.

  If you use a different XP installation disc that was not provided by Dell, this is why you are experiencing activation problems. If you do not have a Dell brand installation CD, you will need to use a manufacturer OEM generic system disk and use the product key on the label of CA certificate on your computer. If you use a copy of XP retail, you would use the product key on the CD to copy the retail case. In the case of the generic OEM drive, it must be the same version of XP that came with your computer (Home/Pro/MCE).

  All that being said, your sound of questions as a material. Did you leave all devices attached during the repair facility? If so, this can also cause the problem. Unplug everything except (obviously) your mouse and your keyboard when doing an operating system install. You should ensure that the material is solid before attempting to install again.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Understand that all your data will be lost. If you save before, try to start with Linux Livecd such as Knoppix and copy the files to an external hard drive. Then download a utility from drive to drive mftr site. or use a third-party (Acronis Disk Director, Knoppix gparted) start Disk Manager to delete partitions on your hard drive and format the drive.

  Now, do a clean install of Windows, preferably using a Dell XP installation CD. Install Dell drivers for all your hardware when you're done, restore data from backups. MS - MVP - Elephant Boy computers - don't panic!

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org