Designjet Z3200 24 in.

Similar Questions

• How to obtain warranty support - ink cartridges for DesignJet z3200

  I have a HP DesignJet z3200 only two colors of ink (MK / LM) stopped printing.  The diagnostics say there are still a lot of ink in the cartridges and they are still under warranty, but when I try to get a warranty support via the Web site it does not get additional information (email or phone number).  Does anyone know how to obtain warranty support for ink cartridges?

  Thank you

  Support for your product number is 800-334-5144. I am also including a link to the support page Hp that list of e-mail and telephone contact information.

  HP support

• DesignJet Z3200: HP Z3200 calibration/profiling issue: Error 58:10 ESP

  my old Z3200 5.5 years prints perfectly. I wanted to calibrate/profile of new media, I had bought. but when I started the calibration/profiling of new media, the process fails and made the mistake of digitization that failed after the printing of the calibration sheet.

  diagnosis of ESP test failed with error 58:10. I went through all the information which is available on the net about it and did what ever has been proposed: clean the print heads, to rehabilitate the printheads, update to the latest firmware version, etc. all look the same test prints correctly, even if some printheads are no longer under warranty. I also disassembled the machine by following the instructions in the manual maintenance and on different forums on the net and cleaned the unit of ESP. but still the same problem.

  then I noticed that my ESP unit looked a little different of substance over all the images available on the net. There is a small mirror inside outside shutter. It seemed a little dirty, so I cleaned it. but always without success. then I thought that maybe it is supposed to be covered and some coating must have fallen. so I put a top band. ESP test succeeded and I was able to profile new media. but after two successful profiling the problem started and I am not able to calibrate/profile of new media.

  any help to solve the problem will be very much appreciated.

  Cheers. Sanjay

  This forum focuses on the level of consumer products.  For the Designjet that you can have better results, post in the forum HP DesignJet here, this is where the DesignJet experts.

• Designjet Z3200ps photo: Designjet Z3200 cannot print red

  Hello

  I had beautiful posters on my printer printing problems, because the colors are not exactly what I was seeing on my screen. Most of the color was beautiful, but always seemed a little cold, devoid of the Red range orangey color. I have calbrated the printer twice and all the colors look perfect. After several unseuccessful attempts to manipulate the colors with the HP utility

  I decided to print a color chart with red, green, blue, Cyan, Magenta and yellow. All the colors are almost perfect, except for the Red; He printed almost black. What is c? How can I fix? Moreover, the Red cartridge is new, but there is no deal.

  Thank you

  Max

  I suspect that your black carpet & red printhead was bad... replace & try again. also your media color calibration

  Use of course good icc profile for the paper you are using. myself using the HP everyday photo glossy or satin paper.

  or brilliant canvas. I use all the hp photo gloss/satin with icc GE Profile & very satisfied with the results.

  My Z3200 44 '' 2 print the most beautiful, colorful posters vives, pictures etc and I also have 2

  Z3100 & so perfect print

• Designjet Z3200 Photo: Designjet Z3200 Photo - paper will not load

  I got this plotter for less than a year (although it was purchased through a school and languished in receiving for a while before I was in fact, the guarantee is therefore).

  Today when I tried to load photo paper in it he refused to recognize that I inserted the end of a roll in the plotter. I went through the procedure of typical paper loading, but it seems that the sensor that records the fact that the document has been inserted is borked/don't normally work. He's always telling me to load paper.

  I tried to lift the locking lever to see if I could advance the paper and do recognize it, but had no luck.

  The plotter was sitting idle for several months during the summer.

  I can't find documentation on this problem. Is this typical? It's just a bad sensor? What?

  I used previous generations of this tracer a lot in the past and would call me as at least a moderate user in advanced. I've never had this problem

  Advice? Patches? What is it going to cost me, since I'm now out of warranty? It's a little irritating, as I ran less than 50 feet of paper through this thing - I don't expect that broke quickly.

  Thanks in advance!

  Problem solved thanks to another thread.

  OOP sensor has been disconnected. No doubt some students unplugged knucklehead.

  Thank you! Sorry!

• Designjet Z3200 Networking question

  I have 2 identical Z3200ps plotters. It runs like a champ, and the other would be if I could understand this last question... adding to my pc to be able to print over the network. I am able to do the plank drawing through i.p. on web page address, and I can even ping plotter. However, when I go to add through devices and printers... nothing. I tried it from a pc Windows 8 and Windows 7. He research and can't find anything. I replaced the trainer and still no go. I could even send a print of the web page of the tracer. Also sent one when you're connected via USB. Any help would be greatly appreciated.

  Thank you!!

  Don't know how or why, but I came this morning, plugged the network cable in the plotter, initialized, and in some sort the IP config had passed from manual back to DHCP and picked up a new address. I changed the config manual, keeping the new IP address. Decided that I would try once more to add the Tracker on the network. You know, the sonofagun worked. I had activated impression more than 9100 last week, thinking the same thing you Milo. But after I did it, there was no change. Maybe it was just to take the time to update? Who knows... but anyway his work and I appreciate all the help.

• Wheels / casters for metal stands of series or dj500 Designjet Z printers...

  I was wondering where I can buy the wheels/casters for the Designjet Z3200 stands, also dj500 metal?

  I searched on Ebay, Amzon, also google. no luck.

  those who were on the metal with brake support & move. not easy to move with even a broke & scratching at the ground...

  Thanks in advance for your kind info.

  Three on ebay right now.  http://www.eBay.com/Sch/i.html?_FROM=R40&_trksid=M570.L1313&_nkw=Designjet+caster&_sacat=0

  Did a search for "Designjet cast" and until their arrival.

  You can also view the places such as staples or Office Max/Depot.  Or even Lowes would carry some duty more heavy ones.

• HP Z3200ps Dedignjet: What to look for when buying a HP Z3200ps Dedignjet of second hand

  Hello. I am new to this forum so HELLO...

  Forgive me for asking a vague question a little. I take a glance on one occasion Designjet Z3200 44 "in the near future. There are obvious things to watch? The guy is ready to demonstrate the machine. I have an old Canon W6400, so I'm pretty familiar with printing large format, but was wondering if you had any suggestions?

  Thank you!!

  3 things you want to check.  First of all do run all the reports of service that will tell you the status of all ink tanks, print heads and, possibly, the gas station.  Expiration dates are more important on the printheads on the ink tanks. To run a print head calibration routine to make sure that the printer is.  Finally, open the hood and look at the State of the drive belt.  See if it looks worn out as a substitute, it can be expensive.  Looking for black particles bearing under the belt like that indicates the level of wear.  There will always be a few particles, but a lot is present which could indicate that the belt is near time of replacement.

• Designjet Z3100, Z3200 lcd white & green power flashing lcd

  I have one of each Z3100, Z3200 44 "model and both virgins panels lcd, also the power lcd green kept flashing?

  I looked in the service manual and nothing mentioned about this problem.

  Any sugguestions where to start first?

  It could save you time and ask this stupid question first here, as so many pros on this forum & might already knew...

  Thanks for your help...

  Thanks for the kind & professional, more technical help on the forum who has solved the problems of our HP Designjet users of

  time to time, even better, faster & effiencient more than HP.

• Z3200 printer utility

  Although my Z3200 and Photoshop CC shows print custom, the printer utility shows no.  I just installed the latest version of the utility (27.0 6 March 2014).  Operating system is 10.9.4

  I rebooted the printer and the computer and the printer utility says still no custom print media.

  Ideas for a quick fix?

  This forum focuses on the level of consumer products.  For the Designjet that you can have better results, post in the forum HP DesignJet here, this is where the DesignJet experts.

• Designjet T120: HP T120 error BA7F11E0 designjet

  We have a HP designjet T120 when power on/off, this (BA7F11E0) error message appears on the screen immediately.  No movement of transport or initialization is performed. Just the error and nothing else. Pls help.

  Thank you

  Hello

  Try to isolate the printer, remove the printhead, inks, connectivity cables and turn on the printer.

  If the error persists, it may be a problem with the APC hand.

  Best regards

  Mike G

• DesignJet 130nr: canvas print Designjet 130NR

  Print on canvas of sheet (13 x 19) on Designjet 130NR works very well. Called HP Support asking if there are 24 "canvas rolls that work. Told me and it makes sense, the tool can not handle the Cup fabric.

  Someone at - he found and printed successfully pre-cut large canvases for the 130NR? I've got a good big letter opener, but as anyone who uses the 130 know, it rejects easily paper cut perfectly.

  Thank you

  Marty

  Hello

  Strawberry is not really designed to cut the canvas. Is too thick

  You can still use it, but you will need to replace it more often.

  If your knife used to work, you may need to replace it now

  Here is the part number Q1292-60064 Media knife

• Designjet t125: designjet t125 blue screen error B332347C

  Hello.

  I was ask to get this error:

  When you feed the plotter that blue screen appears with this code: B332347C

  I can't find the service manual for this, if anyone can help me?

  HELO try this solution
  You need to replace hp designjet encrypted t520 chip on the motherboard inside the plotter
  You can buy it on ebay http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip/282223353841

• Designjet t520: designjet t520 error b3d73738

  HP Designjet T520 36 inches gives b3d73738 on the screen, never seen that before and isn't anythong on this subject,

  the printer does not start or let me take any operation

  need urgent hepl on this issue.

  Thank you

  Hello

  Try the following

  -Replace the power cable

  -Connect the printer to a different outlet

  -Isolate the printer, remove the ink cartridges, print head, cable connectivity

  If you still have problems, you may need to replace the APC's hand

• Designjet T520 36 inches (CQ893): Designjet T520 36 - in

  My tracer: HP designjet T520 36 inches (CQ893) start.

  The screen is blue, B87E7114 error code

  Turn off and turn on probably. Power button 15 seconds and powering button 50 seconds also.

  If push yellow power light. power on no beep error.

  End of warranty: 2015.02

  What is my error code?

  Thank you

  Sorry, but your post is very confusing.  You've got an ok error code, after that I do not understand what you mean by switch / stop and seconds.  First thing you need to do is to unplug the plotter of the power source.  Wait about 30 seconds and plug back in and if the power does not turn on by itself, use the power button to turn it on and tell us what appears on the screen.