DeskJet 3050 a j611g do not print

Similar Questions

• HP deskjet 3050 a j611g: hp deskjet 3050 a j611g-not to print any page, giving a blank page of outter

  Hey.
  I have a printer hp deskjet 3050 has j611g. There is ink on the inside (almost 25% black ink available), but when I send a print, he don't never print anything on it, even there is not inside the printer to print anything or take the time to print on the page. paper will quickly inside and from outside really fast... I would be very grateful for all comments. Thank you.

  Hi fahidb ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer not printing and sending on a white page.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I have also found a document on repair print quality problems for the HP Deskjet 3050 a (J611) all-in-One Printer Series.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• HP Deskjet 3050 (J610a) won't scan - printer not found

  This fine all worked until I had to get a new router and I can scan after you have reinstalled the HP 3050 wireless printer is no longer on my computer. It is worth noting that on my other computer, there has been properly installed on Vista and I can scan and print normally.

  When I click on the scanning software HP on the desktop or in the program menu it shows an error window saying "HP Deskjet 3050 J610 series is not found"

  I ran the HP scan diagnostic software and he said just that no scanner are installed. But I installed the software from the CD, I did the first time I got the printer and I did something different this time when I changed the router then why didn't he scan?

  Can anyone help?

  All sorted.

  The problem was that I had installed the drivers of BASE and not the FULL software.

  Silly me!

  But it could help other users in the future. Uninstall, and then download and install the FULL software and everything should work fine.

• DeskJet 3050 a-J611g / CR232A: 0X00759C98 HW_WATCHDOG C, what is error - code this? How can it be solved?

  Hello, I have a Deskjet 3050 a-J611g / CR232A. I am running windows 7 (variety, that is to say: etc. ultimate, home premium,.) code error 0X00759C98 HW_WATCHDOG C, what - what? How can it be resolved? The only thing that was changed was I enabled update automatic and put in place e print. Everything seemed fine, but the next time I went to my printer this wasd error on the screen of printer control button. Once the printer starts after reset it again. Is there a bad Council, which needs to be replaced? There seems to be nothing broken or out of place, that's why I think. Any help will be greatly appreciated! If anyone has the definition of this error, it would be very useful! Thank you in advance!

  This also happened to me. To fix it I just unplugged the printer of and held the power button for about 15 seconds. The only changes that have been made before the error occurred were:

  1: network SSID was changed

  2: tried printing without black print cartridge (later discovered that she had no effect)

  3: new software installed on computer (don't think it was the question whether)

  I hope this works for you too!

• Can not scan to my MacBook Pro from my Deskjet 3050 a mistake: machine not found.

  Hello

  I need help. I just plugged in and installed the software for my deskjet 3050 a yesterday. All print and eprinting functions work fine, however, the option scan says: "not found computer. Make sure that the HP software has been installed on the computer. "I don't know what to do from here. I use it on my wifi connection. However, I also tried with the printer plugged into my MacBook Pro directly. I am running the most recent update. (not sure of the number). Please notify.

  Thank you!

  Hi stewcf,

  Thank you for your quick response!

  To see how to scan in your 10.7 system just click here. I realize account as the said document to 10.8 but the steps would be the same for your system 10.7.

  If scanning your Mac works without error, I would try you power cycling of the network.

  To do this, I would like that you completely turn off your Mac and your printer. Once they are off, go to your router, pull out the power cord on the back for 30 seconds. Once 30 seconds have elapsed, plug the router in and wait for the lights to return to normal (this may take up to 5 minutes). Once the router is back please turn your Mac back on your printer and then once everything is set, please try again the analysis of the front of the printer.

  I would like to know how everything goes!

• HP Deskjet Ink Advantage 2545: HP Deskjet Ink Advantage 2545 does not print Cyrillic

  Hi all

  My HP Deskjet Ink Adnavtage 2545 does not print Cyrillic characters, for example: България. I installed the latest drivers from the link below, but the problem persists: http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-Ink-Advantage-2540-All-in-One-Printer-ser...

  I will be grateful if you help me to solve this problem.

  Hello

  I called the support in Bulgaria, but the cause has not yet been identified. :-(

  Update (10/03/2015): the problem was caused by the original-black cartridge - which came with the printer. It has been cleaned and now everything works fine.

• I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

  I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

  Thank you very much!

  This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

  I hope this information is useful!

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• HP Deskjet 3050 a J611: Driver not recognized HP 3050 has J611

  I recently got a printer HP Deskjet 3050 a J611.  I get an error message saying driver is not updated.  I downloaded the driver (not sure if it was good because there is a choice of 3) (J611a, J611b and J611g).  I tried again and it still does not.  The HP troubleshooting page recognizes the printer is connected, but it won't work.

  Please help to get very frustrated.

  Thank you

  @Captainyaya,.

  Please follow the steps below:

  1. disconnect the USB.

  2. remove the HP 3050 a DJ software go to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software DJ 3050 has disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your 3050 a DJ (DO NOT connect USB until the software prompts you to):

  HP Deskjet full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• DeskJet 3050 J610a: We could not retrieve the list of drivers for your product (3050 J610a)

  I have the HP Deskjet 3050 J610a. Printer worked fine on my machine Win 8.1. Just got reimagee to the same machine (Win 8.1) and had to reload my drivers for the printer. Site displays the following message when I select 3050 J610a with Windows OS. I can't add the printer to the computer as pilot given result is not available... was here last year.

  Anyone has a suggestion. My other computer on Win 10 works and driver is available.

  We were able to retrieve the list of drivers for your product.  Please select the desired operating system and select "Update" for a new attempt

  Hello

  It is still there:

  http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

  A quick victory is first install it on your computer. Please download and install on your machine.

  Kind regards.

• HP Deskjet 3050 AIO a - how to print in concept?

  Could someone tell me please how to print in concept?

  With my other horses, it was possible, but it was by USB, now on WLAN it does not work?

  (see attachment)

  Hello

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

• HP deskjet 3050 a j611 can not find the driver software when connected

  I tried to plug my new printer Hp deskjet 3050 a j611 range but can't get furthur than coonecting because it can not find the driver software. I had to download the driver software myself via this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=5061082& but once I downloaded that and is entered in the details of the wireless connection, it cannot find the driver software. I can't use the CD my drive is broken and I am awaitng delivery of an external in a few weeks, but I'd like to get my printer started. Help, please

  Hello Buzbybumble

  I looked into it further and found that all J611 Deskjet 3050 a models use the same software. So, you should be able to download and run the installation from the link below.
  Software HP Deskjet 3050 has complete features J611

  IMPORTANT: Make sure that the printer is not connected to the computer until the installation program ask you to do. Run the Setup and follow the instructions on the screen.

  If the printer is not yet seen, then choose the option "continue INSTALLATION WITHOUT CONNECTION NOW I WILL CONNECT the PRINTER LATER. A shortcut must be placed on your desktop and it will try to add a printer when it is executed.

• HP deskjet series of 1510 does not print

  We recently mloved to la Gomera (Canary Island) and there I bought an hp deskjet printer 1510. It will not print when connected to my laptop, also a HP with Windows vista, although it is connected, is on and is the default printer. I tried everything the doctor print and scan suggested (like cutting the fire walls, check print ooler, reinstall the driver and software etc.) and everything that I found in the taking in charge of HP. still does not print. When it is connected to our other laptop, HP also but with windows 7, it works fine. The only thing that I managed to print is a diagnostic page but it gives only numbers and letters like SN = CN39a19mmp05yr 21 PG = 81 12 BY =-5 yr 22 FB = 0/0, etc.. Nog is far from help me :-(.  someone knows how to fix this?

  Hello

  Please try the below mentioned steps...

  Click START > device and printer > add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• HP deskjet 3520: black ink does not print

  My HP deskjet printer that is 2 months warranty, that I recently bought a new HP cartridges for now will not print black (other colors are all very well).
  If have spent hours and hours trying to solve this problem, following all the advice on this forum - believe me, I tried to clean the vent system, cleaning of the print head. The really frustrating thing I had just bought new ink for the machine $60 thrown and now my printer does not print. I'm out $60 and I need to buy a new machine very frustrating and this machine is used very little only occasionally to print some checks and a few emails.

  I promise you that this HP will not be my next choice.

  Tammy

  The message here suggests to call HP Support even if your printer is no longer under warranty if the standard troublehsooting steps do not resolve not black not print on your Deskjet 3520.

  If you are in the USA call 1-800-HPINVENt or Canada, also see details here.