HP Deskjet 3050 AIO a - how to print in concept?

Could someone tell me please how to print in concept?

With my other horses, it was possible, but it was by USB, now on WLAN it does not work?

(see attachment)

Hello

Follow the instructions below.

1. open devices and printer

2. click on add a printer

3. click Add a local printer

4. from the use existing port, select the USB option and then click Next

5. click the button of Windows Update to get all the support window 7 drivers updated

6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

7. follow the remaining instructions to complete the installation.

Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

Tags: HP Printers

Similar Questions

  • HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?

    HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?  I looked everywhere I can think of. You are my last resort.

    Windows 7 ~ 64-bit

    Hello

    Unfortunately, this printer does NOT support duplexing (printing on both sides):

    http://support.HP.com/us-en/document/c02231304

    Kind regards.

  • DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

    How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

    Agustin-Pinales Hello,
    There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

    Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

    Option 1 - connect the printer to the network via the WPS button:
    On the police of the printer control panel
    1. press on the icon Setup - looks like a key
    2. Press 'OK' for 'Wireless '.
    3 use it up or down buttons on the right to select "Wireless Configuration".
    4. Press 'OK' for "Wireless Configuration".
    5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
    6. Press 'OK' for "Wi - Fi Protected Setup.
    7. it will say you have two options, simply press the OK"" button.
    8. Select the 'Push' button for Setup WPS promotion
    9. follow the prompt on the printer press the WPS button on your router
    10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

    You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

    At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

    Option 2 - Connect using the utility (printer installed and connected via USB)

    1. click on the Apple in the left menu bar
    2. click on "System Preferences."
    3. click on «Printers & Scanners»
    4. click on the "HP Deskjet 3050 has" on the left to highlight
    5. click on the button «Options & supplies»
    6. click the button of "Utility" in the upper right
    7. click on the button "Open Printer Utility.
    8. double-click on the icon "Wireless Configuration".
    9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
    10. Select 'Allow' If a confirmation is requested
    11. click on 'done '.
    12. close the 'utility '.
    13. click on "OK".
    14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

    Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
    1. click on System Preferences
    2. click on Printers & Scanners
    3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
    4. click on the button "Delete printer" to confirm

    Add the HP printer in the print queue
    1. click on the symbol '+' at the bottom left
    2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
    3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
    4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
    5. click on the ' Add ' button.

    You can also click on the link below for the other steps, if you need assistance. Or post here your results.

    Mac OS 10.10 Yosemite and HP printer supports

     
  • I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

    I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

    Thank you very much!

    This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

    I hope this information is useful!

  • DeskJet 3050 a: hp deskjet 3050 has not not red print

    I recently replaced both my cartridges on my Deskjet 3050 has. He had already printed perfectly for the past 2 years.  I checked that they are correct cartridges of real HP purchased from HP.

    I'm on Macbook Pro with OS X Yosemite 10.10.5 version and wireless connection.

    Please can anyone help because it's so frustrating?

    Thanks in advance.

    Martin

    Hi Martin,

    Try to print a self-test report by selecting settings > reports > Self Test.

    You see the magenta color printed correctly by the equipment?

  • HP Deskjet 3050 (J610a) won't scan - printer not found

    This fine all worked until I had to get a new router and I can scan after you have reinstalled the HP 3050 wireless printer is no longer on my computer. It is worth noting that on my other computer, there has been properly installed on Vista and I can scan and print normally.

    When I click on the scanning software HP on the desktop or in the program menu it shows an error window saying "HP Deskjet 3050 J610 series is not found"

    I ran the HP scan diagnostic software and he said just that no scanner are installed. But I installed the software from the CD, I did the first time I got the printer and I did something different this time when I changed the router then why didn't he scan?

    Can anyone help?

    All sorted.

    The problem was that I had installed the drivers of BASE and not the FULL software.

    Silly me!

    But it could help other users in the future. Uninstall, and then download and install the FULL software and everything should work fine.

  • My HP Deskjet 3050 a takes forever to print.

    1 page takes aprox. 10 min to print from my printer HP Deskjet 3050 a. I tried with USB and via wireless network. I also tried my iOS 10.6.8 mac and my windows laptop with windows 7 starter. The printing time is the same. The HP print and scan doctor says that nothing is wrong. The printer is brand new.

    Can someone help me please.

    Thank you

    Ann

    This is probably caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  • Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

    Good afternoon

    I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

    I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

    It's a real pain and I think to get rid of my printer without wire-HELP!

    In addition to the above, I noticed the following error message when I try to print:

    Device status: unknown

    I.D. service: unknown

    I.W Version: unknown

    Serial number: unknown

    Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

    Product number: unknown

    I.K no 658

    Watch the device Staus and office as "Unknown".

    3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

    Tracy

    I see that I had 20 veiws and no answer!

    I am new to Mac and not very techno, however I seem to have solved this problem myself.

    I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

    "I basically deleted that was not'online ' or 'connected '.

    Problem solved!

    Tracy UK

    TracyUK wrote:

    Good afternoon

    I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

    I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

    It's a real pain and I think to get rid of my printer without wire-HELP!

    In addition to the above, I noticed the following error message when I try to print:

    Device status: unknown

    I.D. service: unknown

    I.W Version: unknown

    Serial number: unknown

    Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

    Product number: unknown

    I.K no 658

    Watch the device Staus and office as "Unknown".

    3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

    Tracy

  • Problem setting deskjet 3050 610 a for wireless printing

    Hello.

    Try to put in place a deskjet 3050 610 a in a wireless network. Printer works fine when connected to USB, but it fails with "Error_000057" when trying to print wireless.

    Router is a BT Home hub 2

    With the help of an acer laptop runing windows 7 32 bit, connected wireless to the router (and online)

    Printer is connected to the network, blue light turned on, the IP address displayed

    Have tried to disable the firewall (AVG)

    Tried to reinstall software

    Using the latest version (DJ3050_610_231) of the driver from the HP website

    Any ideas, anyone?

    Thanks in advance.

    Print a network from the front of the printer test.  If it is connected to your router?

    If so, your AVG is probably the issue.  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • HP deskjet 3050 a j611g: hp deskjet 3050 a j611g-not to print any page, giving a blank page of outter

    Hey.
    I have a printer hp deskjet 3050 has j611g. There is ink on the inside (almost 25% black ink available), but when I send a print, he don't never print anything on it, even there is not inside the printer to print anything or take the time to print on the page. paper will quickly inside and from outside really fast... I would be very grateful for all comments. Thank you.

    Hi fahidb ,

    Welcome to the HP Forums.

    I see that you have a problem with the printer not printing and sending on a white page.

    First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    I have also found a document on repair print quality problems for the HP Deskjet 3050 a (J611) all-in-One Printer Series.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

    See you soon,.

  • Solved! No response necessary, don't thank you Deskjet 3050 J610 - summary page is printed

    I get a 'summary' page, detailing the author, date of creation, number of pages, etc. after each page to be printed.

    How can I stop this? Thank you.

    For the benefit of third parties who may have the same question, please send the details of the resolution.

    If printing from Word or other Microsoft Office products in the printing options "Properties of the Document", there is a dialog box, you usually want to make sure it is not checked.

  • HP Deskjet 3050 J610 Series: Use of printer remove from 22/02/15.

    There is a document which is held in my printer with the status "deletion" since 02/22/15.   I'm not able to cancel printing and am not able to print anything else.   Any help would be appreciated. The print job has been an interactive ticket secured for an event.  I was never able to print even if tickets have been paid.

    Hello

    I think you need to delete the queue. For Windows, try it please:

    Hold down the Windows key and press R.
    from the run window, type services.msc and press to enter.
    If the computer asks you to Admin, you have to accept that,
    regarder watch down to the print spooler service, right-click and select Properties
    Click the Stop button,
    Go to C:\Windows\System32\Spool\printers or C:\Windows\System\Spool\printers
    delete the job inside this folder
    restart the machine.

    Kind regards.

  • DeskJet 3050 a j611g do not print

    I just had my pc hp pavilion dm4-2070us having deleted malware and now I can no longer print wireless from this pc. I uninstalled and reinstalled the printer driver at least a dozen times over the 3 days, run resolve this problem, use the HP print and scan doctor at least 6 times and it tells me whenever I don't have the full version of the driver installed so I click on the button to do it and he always tells me the same thing. The printer says again he is connected to the router, I can print a test page for the PC and can this pc eprint. I can't just simply print directly from this pc. The weird thing only that I noticed is that the printer is NOT connected to a Standard TCP/IP port, but a port which is almost the same as the serial number of the printer. Also the location of this printer is NOT filled with address ISP of the printer on the general tab.

    What is going on?

    I am running windows 7 64 Edition home premium with IE 10.

    I found the solution - incredibly the problem is that I got this one too small set document margins. I have slightly increased the margin on one side, and now it prints. I realized that, when another document unrelated to print without problem. Of course, I have no idea why eprint doesn't care about this small margin, but did the print button in Excel, but at least the mystery is solved.

  • Establishing a paper - HP Deskjet 3050 All jam - in - One Printer

    Paper jams occur a lot. Rolls can get dusty and form paper to crumble. Pages are moving too quickly and cause a "paper jam".

    Using the wrong paper could be a problem. A sensor in the printer can go wrong and the error to occur.

    I have a link that will send a video that can help jams and paper getting caught up inside the printer.

    http://www.YouTube.com/watch?v=suiQgoH-8cM

    Here are some steps, as an attachment, just in case the video is not enough information.

    http://support.HP.com/us-en/document/c02130018

    Paper jam can also cause your cart stuck and won't move change ink cartridges out.

    I hope this helps the community

  • HP Deskjet 3050 a J611 won't print envolops

    I've never seen a doing the right thing. I changed to another HP printer because I hoped that it would print envolopes but they never do.

    Nobody has a clue, it's not for lack of HPs like HP printers work with other softwar like Open Office. It works better and it's free. I used another software to print envelopes. Œuvres of HP but MsWord is an abortion by a company that goes out of business.

Maybe you are looking for

  • Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

    Hello I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the

  • Problem of recovery Internet 2002F

    Hello The other day my Macbook Pro A1278 was about to run out of battery, so I plugged in the charger. Almost immediately, the screen went blank and when I restarted it I saw a file flashing with an exclamation mark. I launched the internet (command-

  • Z580 Driver TouchPad Win8

    Hello I have improved the system to Windows 8, including many errors with Werfault.exe I have problem with the Touchpad. I downloaded the new driver page driver/support here, but again there is a note that it is for the system 64-bit / 32-bit, I can

  • Touch screen compatibility Quickbooks POS Point of sale system

    Our company has two HP Touchsmart 610 computers. The touch screen of the device of the workstation works fine, however, it will not work on the server. It is only with the Intuit (Quickbooks) POS Point of sale program 10.0. There must be a way to rec

  • OfficeJet 4315v: all-in-one Officejet 4315v Telec impossible. Dials ok but receives always a 'no response '.

    Office Jet 4315v won't send fax. Dials ok and you can hear the ring of fax receipt machine but after a number of rings, a leaf print and says 'no response '. The fax Mach I am trying to fax in functioning.  The Officejet 4315v worked flawlessly in XP