DeskJet 3050 J610c ceased to appear in Image Capture (OSX)

Similar Questions

• HP deskjet 3050 all-in-one is compatible with mac osx 10.9.2

  I have a HP deskjet 3050 j610a fresh out of box. I can get it to print; It has a connectivity to my wireless router and it will print; My Mac Pro with OS osx 10.9.2 cannot print; I get the message: the printer does not respond.

  This printer is compatible with the Mac operating system? When will it be?

  THX

  Hello Greenwave3,
  Welcome to the HP Forums.

  I see you are trying to use your Deskjet 3050 on Mac 10.9.2. I will try to help you with this.

  OS X v10.9 Mavericks: installing and using the printer on a Mac, this document would you guide in installing the printer on Mac 10.9.2.
  If it is installed early return uninstall. You can also study the reset printing system and do a check and repair disk permissions, and then try to reinstall. Here are two Apple documents to help you:
  OS X Mavericks: reset the printing system.
  12.x disk utility: repair disk permissions.

  That a try and let me know how it goes. Thanks for posting on the HP Forums.

• HP Deskjet 3050 a print small images

  We use a printer HP Deskjet 3050 has to work and it's ok if we want to print just the text and images and text together on the same page, but when you go to print a picture on a page it prints just a small version of the image and puts it in the upper right corner, no matter the size make you. It is an iPad 2, I don't know if it does the same thing from a PC.

  Thank you

  Gareth

  With the help of the iPad AirPrint won't let you print on a different size. To be able to print on different sizes, you will need the HP ePrint app for iOS devices. You can get it on the App Store. I'll link more below. This should be everything you need to make it work. Let me know what happens.

  HP ePrint Mobile Apps FAQ

  Getting started with HP ePrint Mobile Apps

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• HP Deskjet 3050 j610a scan error

  About a week ago my HP Deskjet 3050 multifunction j610a worked very well. However, sudden occurred a parsing error that can't be solved. Whenever I scan any document, the result is a totally black image with a lot of very thin vertical stripes on it. Changes color bands according to the type of analysis that I chose, they are white for the black and white scans or have several colors for the colored scans. Even without any document on the scanner, the analytical result is the same.

  I have uninstalled/reinstalled the software supplied with the device and did the same with the downloaded software from the HP site, but none of them worked.

  The Deskjet 3050 is connected to my PC (Windows 7 Professional 64-bit) via a wireless connection, but the problem also occurs when connected by USB cable.

  PS 1: The HP print and scan doctor found no no problem.
  PS 2: the print function of the unit works fine.

  Thanks for the clarification, because the same question appear while copying there seems to be a hardware failure of the scanner and not related to the software.

  Try following the steps below to solve such a failure, if the same continues contact HP technical support at the service of the unit:

  http://support.HP.com/us-en/document/c00587971

  in case the problem persists when you have completed all the steps listed, the phone number to contact HP is that by selecting your region and following techniques are supported after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Shlomi

• HPJ610a Deskjet 3050: Join the network wifi through router new Deskjet 3050 HPJ610a

  I moved into an area of network connected to fiber (NBN Australia) and installed a new router D-Link DIR - 850L.  I was unable to connect to the router using WPS.  I had to buy a HP Envy, which connected wtihout difficulty.  I just upgraded my router to a TP - Link Archer C9, with a richer control interface, so I tried again to connect my Deskjet 3050.  Once again, no luck.

  I read a number of posts about this, and they all back down to the re-use of your installation of the printer software.  The problem is that the software driver for OS X El Capitan comes from Apple and is already up-to-date. I am able to run the printer when it is connected by a USB cable, so if I could work out how to emulate an installation, I might be able to get connected.  Is it possible to do this?

  Hello

  Sorry for jumping in, but the steps in Mac OS X are in fact incorrect.

  In System Preferences, select Printers and scanners.

  Double-click the listed USB printer, and then select the printer settings / Options.

  Open the Utilitiy tab, and then click Open Utility.

  In the screen, select Convert to wireless and follow the on-screen instructions to connect the pritner to your wireless network.

  Note: If no option appears, click the top phone menu and select Connect a new printer, and then follow the steps by choosing a wireless connection.

  Kind regards

  Shlomi

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Cannot install HP Deskjet 3050 a using USB or wireless.

  I tried to install a printer HP Deskjet 3050 a on my computer recently.

  After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

  Having said the computer software does not meet attaching me the USB cable, just on the same window.

  When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

  My USB ports work correctly, but the computer address to find the printer.

  I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

  Hi Silvuss,

  I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

  Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

  In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

  I also suggest that you try another cable and see if that can help you.

  A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

  Hope that helps,

  Shlomi

• Install Apps on HP Deskjet 3050 all-in-one a - J611h.

  Purchased a HP deskjet 3050 all-in-one a - j611h; tried to add applications, but they do not appear to manage my Apps.  When I click on 'Add to the printer', he says "added to the printer", but when I then go to 'Manage my Apps', there is nothing there! What to do next?

  Hello pisces3703,

  First of all, let me tell you that I'm sorry that you are experiancing this problem today.  It seems that you printer does not support printing applications.  Here is a link to the place where I foud this information: http://support.hp.com/us-en/document/c03722645. I hope you find this information useful.

• HP deskjet 3050 ALL-IN-ONE J6 has: windows 10 driver for hp deskjet 3050 has ALL-IN-one, j611 series

  After that I updated / downloaded 10 Windows on my laptop, I can't connect to my printer. It is even not appear as option in Windows, even though I made an UPDATE of Windows looking for my HP. How can I download a new driver? A new driver is available for my PRINTER HP DESKJET 3050 ALL-IN-ONE J611 SERIES a? Please don't tell me I have to buy a new printer...

  Thank you!

  Download the driver from the printer Support page:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J611/4311836/model/4311837#Z7_3054ICK0KGTE30AQO5O3KA30R1

• HP deskjet 3050 j610a: hp deskjet 3050 j610a

  I have a hp laptop flow and a hp deskjet 3050 j610 while a printer/scanner/copier. It was working fine, I have it set to work wireless. I can print wireless without problem, but all of a sudden when I scan a document it appears on my laptop as a page with nothing but the black lines. You cannot say that there is a document at all. When you try to make a copy, it does the same thing, it prints nothing else than to the thick black lines.

  I already followed the instructions on the hp Web site. I tried unplugging everything and reconnect it when it is 'static', nothing helps.

  I cleaned the glass and scanner cover that has absolutely nothing.

  I used the printer doctor thing they ask you to download and it conducted tests on everything. It is said there is nothing wrong with it, when I do the scan test it always shows me a document of the black line.

  I tried to uninstall the software and printer and did a fresh install, it still does the same thing. I tried to wipe my laptop to the factory settings and resinstalling a new copy of the software of the printer, nothing happens.

  I entered the function within the software, I downloaded from hp and performed maintenance tasks. clean the cartridges, aligned the cartridges and a printed report but it is written an essay on the glass of the scanner has not been made.

  He told me to put a blank page on the screen and press black copy and it prints the same black lines.

  It was not dropped or damaged. It is in the same place all day, every day. NEVER, it moves its location. I clean the area regularly, so there is rarely any dust or debris on or around him.

  nothing has worked. I tried to look it up if he was still guaranteed, I knew I didn't... but I wanted to see if there is an option if I could send it even if they charged me to fix it, but the only option I found was to come here on this forum.

  someone please tell me that they have had the same problem and they know how to solve this problem, im at the end of the line of patience and I can't move forward more. any help would be greatly appreciated. just don't tell me to go buy a new one, I love it and want to do what I can to address them.

  Please please help? someone... anyone... Thanks in advance.

  Hi there @jessicaortiz39,

  That the Forums are with you!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that you are looking to learn how to get a repair done on your printer. I'm happy to help you with this.

  Please see the following: Printers HP-HP Support Options, which give some details about the support available both in and out of warranty.  You will use the link under technical assistance, contact the helpline, but read the section to the right on "Pay by assistance telephone question" when out of warranty. Of course as indicated that fees are removed once the repair is implemented.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• DeskJet 3050 has with Mac Ibook

  One month there has been no problem with Deskjet 3050 a with Mac Book Pro.  Now cannot print Pages.  Have done all the troubleshooting recommended by HP.  Printer's default; the supplies are good.  The printer is idle.  Have you tried both wireless (that worked before), and now with a usb connection.  Have spent more hours trying to correct.  Problem started with very slow printing - couple of lines, stops and then repeat until the page is done.  Now does not print at all.  Help.

  Hi again!

  I have a few suggestions that will work if everything goes well for the printing problem. Before attempting any software below, please make a copy or two out of the façade of printers to test the equipment. If the copies appear to work correctly, continue with the steps of software!

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the driver full features here: HP Deskjet full feature software and drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8

  Try to print from where ever you and also try printing of text editing. Let me know the results!

  Best wishes to you, I hope this helps

• Why my Mac under Lion does not detect my HP Deskjet 3050?

  Product: HP Deskjet 3050 CH376

  I got my printer works perfectly for like a year on my Mac, which runs on Lion.

  I never even had to use the CD or anything like that. So the other day I tried to set up wireless.

  I put the CD in and it said that the CD was outdated for my operating system, and that I should install the latest version of the software.

  I installed the drivers and software current, but then my computer could not detect even my printer, even through the USB connection.

  I uninstalled the software and then reinstalled.

  It seems fitting that my Mac cannot detect my printer.

  Help, please

  OK, more ideas:

  1. connect your printer directly to your Mac, not to a USB hub.

  2. check if your Mac sees the material:

  -go to the Apple menu, hold down the Option key, and then choose system information

  -Click on USB on the left side.

  -Is it your printer appear as being recognized by the hardware?

• manually clean the printheads for deskjet 3050 has

  DeskJet 3050 a not print not tried red heads ink level four times cleaning is ok and the use of hp ink cartridges

  Hello fred1934,

  Welcome to the Forums of HP Support!

  I see that you can not print red with your Deskjet 3050 has, you ran the print head cleans several times, but it does not help. Try using the manual procedure in this guide: "Incompatible print cartridge" or "Print Cartridge problem" Message appears on the computer or the printer control panel, three Solution.

  Hope this helps,

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports