DeskJet 6980 and rt - no available driver windows

Similar Questions

• HP Deskjet 6980 and Windows 7

  My old computer was Windows XP.  I was using a HP Deskjet 6980.  Automatic duplex printing will not work with 6980 drivers, but I was able to make it work with my old Deskjet 990 drivers.

  My new computer runs on Windows 7.  Automatic duplex printing option is disabled.  The Deskjet 990 drivers are not compatible with Windows 7.  If I try to manual duplex printing, the paper feeds properly the second time through and I end up wasting a lot of paper and ink.  20 pages, I can get one or two to print correctly.

  There are drivers out there that will allow me to do automatic duplex printing?

  Preacher51 wrote:

  The checkbox 'Reduces the margins' turns off when you choose duplex printing.

  HP Deskjet 990c drivers do not work on Windows 7.

  There are 990c Deskjet drivers available in Windows 7 through Windows Update as described here.  I installed it on my x 64 system and it works for me...

• print wireless HP Deskjet 6980 and Mac OS 10.6

  I can't print wireless setup for my HP Deskjet 6980 in Mac OS 10.6,

  I can't find any software update and do not have my original installation CD.

  I scoured the help pages with absolutely no information for this specific problem.

  OK, it's going to be difficult because the printer is very old and 10.6 technically impossible to set up a wireless connection for your printer.

  With the printer plugged in USB, go to System Preferences > print & fax.  Click on the printer and then click «Options & supplies»

  See if you can find the button "see the printer page.  I doubt you can, but we will try.  If this does not work, your only choices are to connect the Ethernet printer to your router or to solve your original problem of sharing USB or get a new printer.

  Back to your original problem, fixing, share the printer make sure that printer sharing is enabled on two Macs (System Preferences > sharing).  Then, we will reset the printing on the Mac problem system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• where to print envelopes from hp 3052 a deskjet printers and how to set up Windows xp

  I have a printer HP deskjet of 3052 a. I use windows XP. He tells me how to load the envelopes into the printer, but I can't find where I put it for envelopes or where I can print from. I think Microsoft works, but do not know.

  I have an impression of what you sent me. All I get from that is how place envelopes in the printer. What I need is the instructions on how to configure Microsoft works to print envelopes. It should print horizonal I think.

• Problems with .dll and WPD files Volumn Driver Windows files is installed but does not work

  I wondered about the .dll files... I have internet explore as a default package as well as Java (TM) web start launcher by Oracle. Can you suggest other programs. I have all the Adobe programs. I would really be able to bind the DLLs of Visual Basic... but VB 08 also do not install and run on my computer, but also the Framework.NET version 4. Be an error in C:\Windows\system32\mvsvc.dll

  I couldn't install Windows WPD files Volumn driver and here's the windows diagnostic ran for me: what can I do to get this driver to run. Device in Windows systems manager is not supported on my system.

  Description

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: wpdbusenum\fs

  Configure the class GUID: {eec5ad98-8080-425f-922a-dabf3de3f69a}

  The PnP problem code: 0000000-a

  Driver name: WUDFRd.sys

  Driver version: 6.0.6001.18000

  Driver date: 01/19/2008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  DMI9C45.tmp.log.XML

  LOG9C46.tmp

  wpdfs.inf

  Thank you. I tried for days now to get this driver to run.

  Jann B

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• How many versions and facilities are available for Windows 7?

  How many versions and installations of windows 7 are available?

  It's here...

  http://en.Wikipedia.org/wiki/Windows_7_editions

  and here...

  http://Windows.Microsoft.com/en-us/Windows7/products/compare

• The deskjet 6980 printer model is compatible with Windows 7 Professional 32-bit update?

  I think the upgrade to Windows 7 Professional, 32-bit. I have a printer HP deskjet, model # 6980. This printer is compatible with Windows 7 Professional, upgrade? I also have a HP scanjet 2400, is compatible too?

  Hi harypick46,

  Yes, the drivers are already included in Windows 7 32 - Bit for the 6980. In regards to the scanjet I'm not find information about the drivers for that old of a scanjet.

  http://support.HP.com/us-en/document/c01943577

  http://support.HP.com/us-en/document/c01874725

• HP PSC 2179, cannot load the driver Windows 7 from MS Update

  Hello

  Just tried to install the 2179 PSC on a DC 7900 running Windows 7. It installs all the drivers except for one very last: 2170 Hewlett-PackardPSC series. I tried the HP printer running Installation Wizard, but it does not work Advisor I don't have an internet connection (even if I do but I'm behind a firewall to work-). Is it possible that I can download the drivers separately? Any advice would be very appreciated.

  Thank you

  Andy

  Hello Ripjing,

  Please try the below mentioned steps, which should allow you to print...

  Click START > device and printer > add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  Now print a document. It should work.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• driver Windows 7 for HP 6122

  Anyone know of a compatible driver?  Thank you

  Hello

  Click on the link that should provide you with access to an article that describes how to install compatible drivers below...

  Driver Compatible Win 7

  Or to perform the steps below...

  Click START > device and printer > Add a printer > Add a local printer >

  (if the printer is connected with USB)

  Select "existing use the Port " then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  Now try to print, it should work.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!

• HP deskjet 6980 series and windows xp

  Currently I have vista on my laptop, if I buy online, would windows xp will be compatible with hp deskjet 6980 series?

  Visit software & drivers for the latest HP Deskjet 6980 downloads include those for Windows Vista and Windows XP. Carey Frisch

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• HP Deskjet 6980: windows 10 + HP6980 to print YELLOW

  The driver for the HP Deskjet 6980 for Windows 10 mistranslates colors sent to the printer. It's what I use is the only new driver for this printer for Windows 7/64.

  Specifically, the YELLOW does not print at all - anything this spell either green blue. I tested this feature by printing two versions of color bars. Indeed, there is no yellow printing, and all the Greens are printed blue. And, Yes, I use new color and black cartridges, so no need to ask about it.

  I built a computer completely NEW with NEW hard disks and a clean install of Windows 10/64-bit via USB 3.0 drive. The only two things that the surplus of my old Windows XP system are the printer and the scanner (HP Scanjet 4370) which worked perfectly on XP system. The scanner has its own problems with Windows 10 and the HP Photosmart Premier does not work (but it is a different matter). I downloaded the new drivers for both devices.

  Apparently, from what I read on the site of HP, the printer or the scanner are supported any longer. I consider that very rude and unacceptable, especially since no appropriate replacement printer is available new from HP with good quality that I've come to expect from HP.

  All that said, is anyone know how I can get my printer to print YELLOW?

  Proteus

  Hello

  Thank you for using the HP Forums.

  The Deskjet 6980 is available in the IN-OS drivers.

  Drivers to win 10 In-OS

  Follow these steps

  1. click right on the button start (Windows icon) select 'control panel '.

  2. under "Control Panel", select "view devices and printers."

  3. Select "add a printer".

  4. If he finds your printer (you have your printer connect via the USB port on your computer), follow these steps to install the drivers in the OS.  Otherwise, select 'the printer that I want isn't listed' > next

  5. in the next screen, select 'Add a local printer or network printer with manual settings' > next

  6. Select "use an existing port: ' > next»»

  7. Select HP > HP Deskjet 6980 (HP) (we recommend that you click on "Windows Update" which could make the HP Deskjet 6980 printer (HP) option.  Note that the 'Windows Update' can take up to 10 minutes depending on how fast your speed at wide band is"

  

  8. click on 'Next' and follow the remaining steps to install your printer driver.

  Hope that helps for printing.

  About your Scanner, you can try this:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• Software HP Deskjet 6980 for Windows 7

  What is the complete package for my network printer HP Deskjet 6980 will be available for Windows 7 Pro 64 bit?

  Please let us know that you are looking for the solution full of Win7.

  The unfortunate situation with the Deskjet 6980 is it will be supported only by drivers HP published with the Windows 7 operating system.

  My personal opinion is that HP drivers published in the operating system Windows 7 has most of the features required for the full recommended print.
  General impression every day
  Photo - borderless printing
  Photo printing with white edges
  Impression of the presentation
  Print fast/Exonomical

  In addition, there are options for page scaling, selection of the status bar, dozens of selections of type of document (including automatic), real photos HP and other improvement.

  Here's the information to use this printer with the USB cable.

  Installation of the product with the USB cable and use the driver from Windows Update or driver

  I would like to have an answer that would be satisfactory.

  At least I wanted to provide you with confirmation that a complete solution is not expected.

  Message edited by SophiaS 12/01/2009 11:33

• DeskJet 3000 J310: Driver for HP DeskJet 3000 J310 does not install on Windows 10

  We have a home network that has our 3000 DeskJet installed and available as a network printer device.  I can print is no longer after the upgrade to Windows 10 on my Lenovo ThinkPad.  I downloaded the full features and software for the DeskJet 3000 several times and restarted my computer Windows 10.  I also ran the doctor print and scan.  I finally found a message that the software and the driver would not install, but I can't understand why.  The DeskJet 3000 is listed as a printer, when I look at printers and Scanners in devices in the settings on my laptop, but the message is that driver is not available.  I am at a loss to know what to do next to resolve this problem.  My husband is still able to print using his office computer that is running an earlier version of Windows.  Any suggestions would be greatly appreciated.

  Hello @linda51!

  Thanks for posting on the HP Forums!

  I see that after updating to Windows 10 you lost printing wireless Deskjet 3000.  I should be able to provide a few suggestions that may fix the problem.  I know that you have reinstalled several times without success.  I'm going to recommend that uninstall you the HP software, one more.   Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup (the link is for Windows 8.1 but the same steps for 10)

  To download the HP software, click here: HP Deskjet full feature software and drivers

  How do you have the printer connected to the computer?  If the printer is connected wireless, then it is possible that a firewall in the Windows operating system has been turned on and is now blocking of scanning.  I recommend to download HP Print and Scan doctor.  With printing and scanning doctor, you can temporarily disable the firewall that may block the printer from the computer.  If the printer is found, you need to turn your firewall on back to make sure that your computer is blocked.

  To download the print and the doctor Scan click here: print and Scan Doctor

  To temporarily turn off the firewall:

  1. Download and open the Print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and disable

  Launch the software HP again to see if the printer is located.  If the printer is not found, then you want to communicate with your provider of firewall while allowing access to the printer to the computer.

  

  To turn on the firewall:

  1. Open the print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and select

  If please, after back and let me know how it goes!

• HP Deskjet 5940: deskjet 5900 series driver windows

  Hello

  How can I install my old printer HP Deskjet 5940, as my new laptop has Windows 10? Drivers do not seem to work with WIndows 10. Thank you!

  Hi @Mirjami,

  Thanks for joining the Forums of HP Support with your request for installation.

  I understand that you have a HP Deskjet 5940 printer you want to install on a computer Windows 10. I would like to help.

  This printer has more no driver available for download on the Web site because it was added to the list of retirement products. When HP adds a product to this list all the online resources are drawn from the site.

  The printer is listed as being compatible with Windows 10. You will be able to install the software by using the built-in Windows print driver. So here's a support document which covers how this can be done - in installation and using the built-in Windows print driver.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!