Sansa froze?

Similar Questions

• Sansa clip froze screen message says "disconnected".

  My machine went on mode standby mode when it is connected with the Sansa clip. I grew up my machine and unplugged the USB Sansa, since then clip shows a message "disconnected." Even if I'm trying out or other options it still shows offline message. I tried the firmware update, but it says that no product can be updated sansa is recognized.

  I hate it when this happens.  The Sansa off, slide the switch to the position IT and hold it there for 10-15 seconds.  This will be a soft reset of the device.

  It should now light up normally and will be recognized by the computer again.

  You can prevent this catastrophe wee by configuring the USB to stay in standby mode. With the trendy Sansa, in Device Manager, go to Bus USB controllers, and expand that.  You will see a list of ads from hub USB root at the bottom of the tree.

  Starting at the bottom, click twice on each one and select Properties.  The Sansa is hidden in this point of view, but it is be clicking on the current tab.  When you have found the position of hub with the Sansa listed, click the power management tab, and uncheck "allow the computer to turn off this device to save power".

  Please note that the Sansa Updater will modernize only the firmware currently installed the latest version, but it is not designed to reinstall the same version, as in the case of a repair.  To reinstall the same version, you must follow the instructions to install the firmware manually.

  In this particular case, I don't think it will damage your firmware.  The soft reset should do the trick.

  Bob

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.

• Problem with sansa e250

  I have a proplem with my sansa e250 after upgrade. Now, I can't start my sansa. The sansa is frozen. Simply appear SanDisk logo on the screen, the blue wheel lite and that's it.

  I tried several times to reset it by pressing the power on button (menu) for more than 15 sec. It power from this, but when I try to start it again the problem persists - sansa e250 froze after sandisk will apear on screen logo.

  Please help me

  I'm in recovery mode. I downloaded a safe recovery tool (e200fw01.00.12), but when I start it up I got a message from what ERROR Application failed to read the version details!

  I find that I have to put some mi4 file in 16 Bit file. What is it? Where can I find it?

• Sansa Fuze 4 G v.2.02.28a wrong with gel, formatted and reinstalled the firmware

  My sansa fuze has been freezing since update firmware a couple of months.  Sometimes he would set himself, when I rebooted, but it gets progressively worse.

  Today it froze to the homescreen as usual, but I could not turn on after I restarted several times, after many trials, I could connect to my pc without the "rocket" freezing at the login screen. I decided to format it through my pc and I also reformatted it on the player as well. I have not reformatted it since adapting if I was trying to avoid having my deleted files. Meanwhile, I looked in the forums to apply solutions that have worked for others in the same situation.

  Here are some of my problems I think to make this kind of odd. Windows tells me is no longer a memory, internal and external, it reads the interns as F: drive and the external slot as drive G:

  Also, I have a napster to Go account that I use for a year now synchronized with this player and he wrote the unit (the "rocket") is not compatible, and I tried the update of napster to see if that was the problem, but napster has been giving me trouble since the new update with the firmware of the rocket. However, now I am not able to re - download my music files without paying the full price for one without a subscription.

  I think that the problem comes from the "rocket" as opposed to my napster account. Any information on this would be great.

  Thanks in advance.

  Have you tried switching USB (Settings/System Settings/USB Mode) mode to PSG?

  If not, why not roll back manually. Just unzip the firmware.26 and drop the .bin file in the drive of the rocket.

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&message.ID=23276&query.ID=69476#M23276

• My Sansa Clip + freezes on me

  I don't know what the problem with my new Sansa Clip +.

  It froze on me like, twice. I wouldn't play the next song, or he won't play at all. I have to restart.

  I hardly use it. I don't know what's the problem with him. I transfer my bad songs?

  And after formatting to remove things, use Kopymac (free Internet) during the transfer of files from your Mac - it prevents the creation/transfer of pesky admin file that creates the Mac, that cause the video to freeze.

• Sansa e260 - I am in Recovery Mode... now what?

  My Sansa e260 mp3 player froze after that my computer crashed.  I had to force him to restart by the lock button, the REC button and plug in the cable.  Now it says "Welcome to Recovery Mode.  Connected USB cable. USB 2.0 MSD mode. " I KNOW not WHAT to DO NEXT.  I tried to use the v1 Firmware update, but it says none are available.  Help!  My camera is longer operable?  I can't force him in MSC mode (it's in MTP mode) because I can't cross the welcome "to the Recovery Mode.  Connected USB cable. USB 2.0 MSD mode. »

  http://forums.SanDisk.com/T5/user-guides-firmware-software/Sansa-e260-I-am-in-recovery-mode-and-Don-...

• Sansa Express - a - Data Micro SDHC 4 GB doesn't work no-Compatible SD/SDHC cards?

  Bought a Sansa Express... after the Sansa Fuze and Sansa Clip returning for the fraction of high volume because it turned brick after a firmware malfunction...

  in any case...

  Can not get my Adata SDHC 4 GB card to work

  Tried to drag-and - drop, I tried WMP Sync.

  formatted in L'Express (is not even delete files?)

  formatted in windows under the default fat32 (is there a specific allocation size?)

  formatted in blackberry phone,

  tried everything

  The express says it refreshes, but sees none of the songs

  (1) someone else has this problem with the possible solution and otherwise?

  [(2) your brand/model/size MicroSD card you have to work in this document, the list and how... so I can buy it =]

  It fixed...

  Format the card using the cmd invites... format DriveLetter: / FS: FAT (Believe this is the right control)

  then I just dragged and deleted files on...

  the mp3 player the Lise, and * in him plugging up *.

  Hmm, haha, its froze on the sandisk logo...

  OK, press and hold the select button and the volume, he turned on... lets see

  OK, I guess it works!

  I'll keep everyone informed

  [Thank you me =]

• My Sansa Fuze is photographed... help?

  Okay, so, my computer froze and had to be stopped, and my sansa fuse has been plugged in, now it does not work. I turn it on and get a blank screen. When I plug it into the computer, I see the normal screen of 'Connected', but as soon as I unplug it, welcome back to the white screen of death... Is it all the same to restart or do I need to go to the store I bought it at and ask if they can fix or replace it...?

  You have probably some corrupted data, maybe a transfer was interrupted when the computer froze? Format and reinstall firmware should be all you need. There is no way you describe would have actually broken beyond repair material. I'll copy and paste my advice for reformatting to another thread;

  Try connecthing the reader to your computer, then formatted the player in respect of the management of the disks (if you use windows), then download firmware appropriate for your reader to this thread. Make sure you choose one that suits, as the case may be, you have a V1 or V2 rocket. You can check this by opening the file 'version.sdk' (you can find it in the top folder of the "rocket") in any text editor. Unzip the file, place it in the top folder of your "rocket", and then disconnect the drive. It will install the new firmware, and if all goes well, it should be good as new after that.

• Sansa won't work in MSC mode at all

  My sansa worked perfectly before, it was rockboxed and loaded with music. Then one day I turned it on and it froze in the system menus of rockbox. I turned the sansa on and outside and he consistantly froze at the same point. I thought it was a problem of rockbox, so I used sansa patcher to uninstall bootloader. Who took care of my freezing problem but now using the original firmware it only sees half of my songs and I don't have a micro sd chip in there. The other problem is that when I put the sansa MSC mode and plug it into the brief of screen sansa bed connected, but then once I try to explore the sansa in windows Explorer, that it goes offline and the computer crashes until I unplug the sansa. I isolated it as a flaw in the sansa by trying on each usb port on three computers different and three different versions of windows (Vista Premium, Windows XP Pro, Vista Home Premium 64-bit). I tried to plug it on and off. Is there a way to fix this? Replace the recovery mode firmware help? The device of formatting would have an effect? MTP mode still works well but I would like to get rockbox works again and I doubt that I can solve the problem of database of it not finding my songs without MSC.

  I appreciate all help.

  It's quite strange. MSC is usually easy to use mode and PSG is the problem. I suspect that there is a bad file that was transferred to MSC mode (or while using Rockbox) and he's in trouble. But you can't really fix that one file without returning MSC. I also assume that you use Rockbox to read files as file names and that these files do not have the Sansa like ID3 tags. But any. It is now a mess.

  Formatting will delete all the files that you have added to the unit, so let's hope you have backups.

  First, try to update or replace the firmware in recovery mode. See if that stabilizes the connection of MSC. You can then run ChkDsk for a chance at a file of fixing problem.

  If not, get in shape via the recovery mode. Make an empty folder called sansa.fmt and drag it into 16 MB - FORMAT. Do not use explore to the Format 16 MB FORMAT - that would make things much, much worse.

• iPhone froze on the hard reset, updated it and now she's asking owner password previous iCloud

  I Went to update my iPhone used made it to half way through and froze had to reset hard but now it asks for the password previous owners iCloud that it has been reset when I got it

  IS that what I can do about it? I have no idea who was the last owner. And the iPhone is not stolen before I tried to update, I had AT & T unlock it is not black listed or anything like that

• iPad, Safari froze and was told that I had to call apple for support assistance.

  My iPad Safari froze and was told that I had to call apple for support assistance.  I called and gave the last four digits of my serial number of the iPad.  They wanted me to download app and pay money, but it felt weird, so I hung up. Am I or my systems compromised in any way by calling and giving the serial number or hang up in time that nothing should be affected?

  Do this...

  Tap Settings > Safari and then slide down and tap clear history & data website, then reboot your iPad.

  The number they gave you is not Apple.

  Never give any personal data abroad on the net, including serial numbers.

• 'New' Refurb Mac Mini froze within the 1st week - should I return?

  We had our refurbished Mac Mini (8 GB, 1 TB) for less than a week, on the fifth day, he froze in the morning when my son tried to open a session (session was still active since the day before, but the Mac Mini was asleep).  The predefined cover for a long period of time, and although the mouse is moved, it did not react when you have clicked on anything whatsoever.  I had to finally press the power switch on the back, turn off the power.  There is not a lot of software installed on it yet, chrome, software the Microsoft Bluetooth mouse, keyboard of Logitech software and a few games of my son got out of the Apple App store (but did not play at the time).  I ran the diagnostic equipment, but it has not reported anything.

  I'm new to Mac, so I'm wondering which, if it is a red flag, because it is a refurbished device and that I should just go back to the store and get a non renovated unit?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said bark 2 hours and 7 minutes since last night.  What can I do?

  I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said about '2 hours and 7 minutes' since last night.  What can I do?

  Try to turn off the computer with the power switch, and then restart.

• Computer froze in the middle of the download

  Download el capital froze on installation using my computer!

  Turn off your computer, then restart and try again.

  If you cannot restart, it starts in Mode safe mode by holding down the SHIFT key while starting up. Secure Boot Mode checks and cleans a lot of files, so it takes a lot of time. If it works, restart normally.