DeskJet D2660 - errors Windows 8.1 - don't Print - out

Similar Questions

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• Photosmart C5580: Printer on Windows 7 networking don't print network shared computer

  I've been trading emails with HP support for several days now on this problem and they are unable to solve.

  I have a Photosmart C5580 all-in-one printer connected to a computer HP Pavilion 64 bits with Windows 7 Ultimate edition.  I shared the printer and created a homegroup with one not also loaded with Windows 7 Ultimate 32-bit HP.  Also on the network is a laptop HP with Windows 7 Ultimate edition.

  That is the problem.  I can print the C5580 of the host computer and the HP laptop.  The printer will not respond to the 32-bit computer with the print job hanging in Quebec with an error.  Of course, the window Troubleshooting Wizard is no help.  I installed the package of windows 7 HP printer on all three computers.  I added the printer through the Add Wizard of the printer, tried to add network printer connection, add a TCP/IP port for the printer properties to the 32-bit computer.  I followed the instructions of

  http://support.HP.com/us-en/document/c01886193

  HP and I have run each step resolution of problems they can think of and we begin to repeat.

  Does anyone else have this problem and how did you solve it?

  It is a 32-bit to 64-bit problem. Turns out that the driver for the x 86 processor must be installed on the two computer and vice versa for a 64-bit computer, trying to pint on a x 86 processor.

  I found the solution on microsoft technet at http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/6067a35d-d9ac-4f52-8beb-9aca3f116e9e

  Here's what I did to remedy.

  On the printserver 64 bit, I opened the printer sharing tab properties.

  Then I opened the button drivers additional.

  The x 86 processor has not been installed.

  I sailed on the network to the 32-bit computer and wanted by the printer drivers in the c:/windows/system32/driversStore/fileRepository to find the prnhp00r.inf.

  After I installed this driver, the printer would answer correctly.

• When I try to add a network printer to my laptop I get the error: Windows cannot connect to the printer. Operation can not be completed (error 0 x 00000006).

  The printer is connected to the queue printing is an Epson Stylus Color 740.  I can print to it, if I connect to my laptop directly to the printer.  I also have this error for any printer I am trying to add that is on the network.

  Hello

  My suggestion would be to download and install the latest drivers from the EPSON Web site.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  I hope that helps!

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• Windows can't open add printer: access denied

  I get Windows can't open add printer: access denied.  This happens in Windows 7 SP1 64 bit system.  Could use a little help.

  Hi DickDolan,
   
  -Connect you with an administrator account?
   
  If you get an access denied message, this indicates that you don't have enough permissions to complete this operation.
   
  Method 1: There is a hotfix released to resolve this issue. The same download and install. Check if it helps you to fix the problem.
  Error "Windows can't open Add Printer" in 64-bit Windows Server 2008 R2 or Win7
  Method 2: Try the steps listed here and add the printer manually and check if it helps.
   
  a. open Printers by clicking the Start button, clicking Control Panel, hardware and sound and then click Printers.
  b. click Add a printer.
  (c) in the Add Printer Wizard, click Add a local printer.
  d. click on create a new port. Make sure that Local Port is selected in the list, and then click Next.
  e. in the Port name dialog box, type the name of \\computer name\printer, and then click OK.
   

  For example: If the computer you want to connect is named Bob and the printer called HP then the path would be \\Bob\HP

  f. complete the rest of the wizard and then click Finish.
   
  For more information, see:
  Install a printer

• Deskjet D2660 printer: unable to print from your PC Windows 10 using printer HP Deskjet D2660 shared connected to Windows 7 PC

  Hello

  I have two PC Marge and Homer connected through a NetGear router:

  Margin: A Windows 7 32 bit laptop computer with an HP Deskjet D2660 printer and one scanner HP Scanjet 2400 attached to it. All these devices work perfectly well.

  Homer: 10 64 bit Windows desktop without devices.

  The two computers share their photos, music, videos and documents folders and printers via a homegroup. However, although Homer can see the printer connected to the margin, if I try to print anything from Homer, it fails. To give an example of this, if I print from 2013 word on Homer, the dialog box is shown below:

  

  

  At other times, on Homer, the item to be printed appears in the print queue, spool but then disappear. Moreover, I am aware of the problems of HP driver causing the elements to disappear with the disappearance of print queues in Windows.

  All the HP diagnostic software I tried did not detect the printer, perhaps because it is an older model.

  Can someone advise?

  Thank you

  Martin O'Shea.

  For the Dissapperaing of print job in the queue. Please follow the path below.

  Step: 1 Goto C drive--> Windows System32-->--> coil--> printers (right click and click Properties).

  Step: 2. under printer properties. Click the Security tab.

  Step: 3 Under Group or user name-> click on each one, then click on modify.

  Click on allow on all the paramaters (Permission) and then click on apply and then click ok.

  Step: 4 reboot the system and unplug the power cable from the printer without pressing the power button on the printer.

  Problem should be solved, it's usually because that computer allocates the permission for printing.

  I hope that this should take care of the concern.

• Credential Manager Windows says I don't have permission error code 0 x 80070005 access denied

  Credential Manager Windows says I don't have permission error code 0 x 80070005 access denied

  Hi violinplyer,

  ·         Exactly when you receive this error message?

  You can take hand the case of credentials in appdata & check if it helps. Follow the steps below:

  1. type %appdata%\microsoft\windows\sendto in the start search box and press ENTER. Browse to the location roaming\Microsoft\credentials.

  C:\Users\USER NAME\AppData\Roaming\Microsoft\credentials

  2. right click on the folder and then click Properties.

  3. click on the Security tab, click Advanced, and then click the owner tab.

  4. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the name of the person you want to give to the property.

  If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check. Click OK.

  For reference:

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

• Don't click Desktop error "Windows explore does not work.

  Original title: Do not click on the desktop.

  My desktop computer has worked fine and now all of a sudden I am unable to click anywhere on the desktop. I am running windows 7 64 bit. If I click on the desktop, it will be then to come crash with the message Windows explores does not work then he'll recover. Other differences is that all desktop backgrounds are brighter and it disappears once it restarts, but returned about 5 seconds later. That I can not click once again. Are there any suggestions? I tried to start clean and had no success?

  Hi Nicolas,.

  I appreciate your efforts to solve the problem.

  I suggest you try the procedure described in the article and see if it helps.

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911/en-us

  Note:
  1) data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  2) after the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  3) when you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  4) note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HP Deskjet 3520: 10 Windows will not let me block the update "ghost".

  I am running in the same question as 'has no updates nightly for Hewlett Packard Imaging NULL print HP Photosmart 6520 series' and 'I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop Window 7 error 80070490 o/s", when I run windows updates I get the message

  "He had problems installing the updates, but we will try again later. "If you keep seeing this and you want to perform an Internet search or contact support for further information, this can help: Hewlett-Packard - imagery - print Null - series HP Deskjet 3520 - error 08024200 b ×".

  The solution to both of these post say is to disable the update is not tried to be applied, however, I use Windows 10 and it seems to be an option to ignore an update than previous versions of windows.

  What are 10 Windows users supposed to do when they are run this problem?

  Hello:

  As you know, Windows 10 has made it impossible to hide or ignore updates (or so it seems).

  I found this tool from Microsoft that allows you to hide updates that don't work, or mess up your PC if they work, (as a synaptics touchpad update has done on my laptop).

  https://support.Microsoft.com/en-us/KB/3073930

  I saved this tool on my PC for use in the future if necessary.

• HP Deskjet 845c on windows 7 64 bit

  Hi evry body
  I can't install my printer on Windows 7.
  However, it is succfull installed on Vista.
  Help!

  Please, where can I find these drivers!

  Enzo says:
  Hi and thanks for writing, test what you say and always gives me the same error "windows could not get a list of devices from windows update. "Please try again later" I live in Cuba, and my connection is very slow, if I give a link where download you would be easier

  OK, this is not quite a direct link, but try the following: go to catalog Microsoft update site (you will need to use Internet Explorer, not FIrefox or another browser).  In the search box, select Deskjet 845c, and then press ENTER.  There will be a list of four choices, one you need is that which is 11.6 Mb in size (it is the 64-bit version).

• HP Deskjet 6122 and Windows 7

  I just bought a new Windows 7 laptop. My printer HP Deskjet 6122 USB plugged in, and it was recognized as not specified. 6122 driver windows update indicated that the alternative driver is the 990 c. install the 990 c driver, LPT1 used but no luck. Driver installs successfully but is not communicating with the 6122 printer. I don't want to buy a new printer, but it seems that the 6122 is not recognixzed by Windows 7. How can I get the 6122 to work with my new laptop windows 7?

  Simple answer is that LPT1 is parallel. You must correct this to USB. The 990C driver is correct.

  BTW > I have the same printer on Vista. You have the duplexer on the back?

  

• When I try to update windows I get this error «Windows Update error 80072efe»

  Hello

  I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.

  Hello
   
   
  I found some articles that should help you solve thi sissue.
  Try the methods listed in the articles below and check.
  
  1 Windows Update error 80072efe or 80072f76
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
  
  2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the bios error, windows want to reactivate it to me!

  By turning on my computer, the bios got an error (don't remember what it was), then the computer restarts and windows. Then comes up with a message saying something about "too many hardware changes" and she asked me to reactivate windows. I made no change of material! I got the full version of windows, but I don't have the disk to re - install!

  -Computer features:
  -IBM Thinkcentre
  -1 GB OF RAM
  -Microsoft Windows XP Pro
  -HARD DRIVE 80 GB
  Help, please!

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com