Install Vista 64 on W500, license not recognized

Similar Questions

• Impossible to install Vista on Satellite A300 PSAGCE - not ACPI compliant

  Hello

  I'm recovering the laptop from a friend.
  He has installed Windows XP on its Satellite A300 PSAGCE and concluded that of course XP 32-bit Windows does not support the full functionality of the laptop.

  Now I wanted to reinstall Vista that came with it. I have two recovery DVD but when I wanted to start them (them two DVDs) I always get the error message that the system is not fully ACPI-compatible.

  Now of course this laptop should work with Vista and the provided restore DVD should work as well, no?
  I tried to download a Bios nw, but it seems 1.10 is the most recent.

  I also can't find all the ACPI settings in the BIOS that I could activate.

  Could someone help me?
  It is really urgent and driving me crazy!

  Thank you!

  Hello

  Strange! Usually, if you have created the DVD recovery Toshiba using the TOSHIBA Recovery Disc Creator then everything should work correctly and you should be able to install Vista on this A300!

  I put t know if you have changed something in the BIOS or elsewhere, but you should access the BIOS and should define the default settings.
  Then try to boot from the recovery DVD Toshiba again.

  Good luck

• Just installed Vista now my speakers do not work

  Just installed Vista, now, I have no sound from any application.  Media Player will play all the sounds.  Streaming equipment will play either.

  Hi dratomic2000,

  The audio device may not have been set correctly

  Method 1. Verify that the default audio device is correctly set
  
  1. click on Start sound in the box type start search.
  2. click on sound in the results of search at the top of the start menu.
  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers. If you are using speakers as the sound device and speakers are already set as the default device, go to method 5 now.
  4. Select the audio device you want as the audio device by default, and then click set as default.
  5. click on the Properties button, then select the levels tab and make sure that the volume is at 100 and not dumb.
  6. click OK to save your settings and close the Sound dialog box.

  Method 2. Reload the current sound driver

  1. click on type of Start the Device Manager in the start search box and press ENTER.
  In the Device Manager dialog box, expand of sound, video and game controllers.
  Look for the audio device that was included with the computer.
  2 right click on the device, and then click Properties.
  Click driver , and then click Uninstall.
  Make sure to delete the driver software for this peripheral checkbox is disabled, and then click OK.
  In the Device Manager dialog box, click the Action menu, and then click find the hardware changes. You receive a message that States that a hardware device is being installed, and then the uninstalled audio device appears in Device Manager.
  Close the Device Manager dialog box.

  Method 3 Let us also ensure that your Audio drivers are up to date.
  
  Click Start, click Control Panel, and then double-click System.
  Click the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  Click sound, video and game controllers , to expand.
  Under sound, video and game controllers, double-click the entry for your sound card, and then click the driver tab.
  Note If a driver tab is not present, the entry that you clicked on Sub audio, video and game controllers may not be the correct entry for your sound card. Try to click any additional entries listed under sound, video and game controllers.
  Click Update driver software.
  Follow the drier on the software update wizard to update the sound card driver.

  For more information on troubleshooting common problem of sound in Windows Vista, please see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• First Pro CS6 license not recognized - "serial number provided is valid, but calling it a product was not found on this computer."

  I have a new computer and tried to get the first Pro CS6 installed. I have a license first Pro "Version 6"Windows - I can see in MY PRODUCTS. So downloaded installation for first Pro CS6 "old downloads" page - when I put in the serial number, it says ' serial number provided is valid, but calling it a product was not found on this computer. "there is a"select a product"drop down and the only thing on the list is Pro Prem CS5.5 - when I put in the liscence here It says invalid. Just to try, I downloaded the installation for CS5.5 and who does not accept the license at all. What can I do to get the CS6 running on my new computer?

  A bit of history which could be related, I remember that I originally bought first Pro CS5 from someone on ebay, not knowing that it was a Mac version, which would not work on my PC - so I contacted Adobe and upgraded to CS6 for Windows at a lower cost. I see in MY PRODUCTS there is a serial number for the two "Adobe Premier Pro" version 5 for MAC and Version 6 for Windows.

  Help is appreciated!

  Mike

  It asks you to select a product, qualifying, which is that you have you upgraded

  IF you do not have a serial number for a product that you upgraded by using the same platform, please contact our support staff.

  To contact support for a serial number or activation number, please click on the link below:

  (be sure to connect to adobe.com with your Adobe ID first)

  Serial number and activation support

  Guinot

• Satellite M30-841: cannot install a clean WinXP Pro - CD not recognized

  Hello

  I got a satellite M30 841 with Xp home on it. Now I want to install my own licensed xp pro version, but I'm not able to see the cd in Solution Explorer - although the cd player works - or to boot from it. Modification using boot command doesn´t.
  On the other stand-alone cd works fine. The toshiba recovery cd works on my laptop, but I would like to have Pro.

  Can someone help, please?

  THX ulrich

  Hello

  If you do not see the drive in windows Explorer, try this http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

  By the way: what is the status of the drive in Device Manager?

• New hard drive installed Vista Ultimate, now I can not install my printer - why?

  Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

  Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

  Hi LSMama,

  (1) you get an error message?

  (2) what is the model number of your printer?

  There could be several causes for this problem, try the following steps:

  Step 1: Run the troubleshooter printer available in the link below and then check

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:  Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Install on MacBook Air - DVD player not recognized

  Strange problem.

  Just picked up my MacBook Air today and went to install VMWare Fusion.  Plugged in an optical dvd/cd drive and it is recognized by OSX - the disc appears on the desktop and I can navigate it very well.

  I launch Fusion and he sees not the drive - no button continue unless I keep the DVD player.  The second screen does not see the CD/DVD.

  What I am doing wrong?  Seems if OSX saw the disc, it would be the merge.  It's a serious iso on a DVD of MSDN Windows 7 x 64.

  Going along for an hour trying to understand this.  Any help would be greatly appreciated!

  She was told that I need to run vmware, rather than worrying with bootcamp or parallels.

  Thank you!
  JOHN

  HM, test this point, I expected it to work, but in my results, I was not able to make reognized on my MacBook Air.

  I tested and then on one of our test machines (which is a bit outdated, running 10.6.5 and missing the update of the firmware to 2.0 EFI) and it worked.

  We have improved this test to 10.6.6 machine and it no longer works.

  So it seems that Apple has changed something, and who broke our EasyInstall to physical DVD drive detection.

  Therefore, you can create a disk image using disk utility and install using that for now until we work with Apple in order to understand who has bug is.

  Here's our KB for how to do this:

  http://KB.VMware.com/kb/1015406

  Please mention!

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know

• Last rocket installed update - now the "rocket" is not recognized in Windows XP. (SOLVED)

  Good morning-

  The latest version of the rocket via our Vista laptop to the library.  We are stuck with dial-up at home

  The "rocket" says it has firmware ver. 02.02.28A.

  When I brought this back home, our main PC, which works under XP, ceased to recognize the "rocket".  I mean, nothing.  We don't get the small USB icon in the systray, no devices appear in 'My Computer', and the "rocket" is not even start charging!

  Fortunately, it always works on the Ubuntu PC.  The only difference is 9.04 was a little i-Pod-search icon neat on the desktop.  Now, I get an icon that looks like a piece of paper.  It's kind of weird, but at least it still works...

  EDIT: Another post said to check the USB Mode - apparently the update of the firmware put USB Mode back to Auto-Detect.  I had set it to MSC previously.  Series MSC, transformed, plugged into the PC XP and everything seems OK.  In Ubuntu, I always get not icons cute i - Pod.  I will defer.

  The update of the firmware default always back to Auto-Detect.  Which means that if you have WMP 10 or 11, he should go to MTP mode, and if you have WMP 9 (comes with XP), it should go to the CSM. But Auto anything is not as trustworthy as DIY.

• License not recognized in acrobat

  After the failure of my hard drive, I tried to reinstall Acrobat. It does not recognize my driver's license. I think it is confusing my creative cloud account (I have Photoshop) with the original download I bought. What can I do? I think that my ID original Adobe has my email address but it does not work.

  I have not found the answer I needed at these links, but I think I solved my problem. I completely uninstalled Acrobat and reinstalled while I was offline (e) Creative Cloud. In this way, I was able to use my license to activate it. If all goes well, he will continue to work once I connect you back to the cloud.

  Thank you for your help. I appreciate the input.

• Running Vista Edition Home Premium on Sony VGX-TP25E. After downloading the updates offered during installation, a new window opens indicating that the update works only on Vista. Computer has preinstalled Vista, but somehow it is not recognized.

  There is no error message number.

  Jim,
  It seems that if the this update does not work properly.  Where Sony allows you to download this update to live?  It is on the site of Sony or a Web to Realtek site?  You will need to contact the creator of this driver and know if there is a new one and/or give the problem you are having because they will have to fix this.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing Vista Ultimate, thinkpad r61 connection Wi - Fi doesn't work do not

  installed vista ultimate, now Wireless does not, ethernet not tho, thinkpad r61, had professional vista prior to upgrade, wireless worked fine, wireless adapter: wifi link 4965 AGN, yes a driver updated, done Yes ms dignostics, 1 other thing tho, cannot turn on the wireless radio.

  Wireless connection not working do not, after installing windows Ultimate edition, may depend on a wireless radio.

  Disable anti-virus and firewall (for now) and check if it's anti virus causing the problem.

  Another thing, you can try:

  Uninstall the card drivers wireless network from the Device Manager , restart the computer and let the operating system to install the generic drivers.

  Wireless works fine now?

  Now, visit the support IBM (drivers and downloads) page, enter your model number and download the drivers wireless on your desktop.

  FYI, here is the link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67856

  Install the drivers in administrator mode.

  P.S Make sure wi - fi on the laptop button is turned on...

• Impossible to install Vista 32 bit or Windows 7 on my Satellite L300D

  Hello world

  I recently decided to reboot my laptop, because whenever I open it, it will say do to run a recovery system and doesn't go anywhere.
  I left it on for hours and nothing came, so I tried to install Vista 32 bit, but does not. I need Windows Vista 64 bit or is this something else?

  In general your ad is a little complicated to understand. We understand that you have problems with the installation of the OS, but I put t understand exactly what happens then please be so kind and try to explain what happening exactly when you try to use the original Toshiba recovery image.

  Does installation starts correctly?
  On what stage is stays and doesn't go further?
  What happen when you try to use the Win7 installation disc?

  Please provide as much information as possible.

• How can I reinstall MS OneNote2003 after installing Vista?

  Hello everyone,

  I was a bit confused of the 'ExpressUpgrade' action, because I first thought I would get
  a DVD-Windows Vista upgrade, but as I can see in ModusLink he is named "Windows Vista Home Premium 32 bit DVD"... OK, it's done now, but that's why I have other questions:

  There was additional software and utilities already installed (I have a Satellite P100 - 463 WinXP).
  I know that there is this "step by step Toshiba DVD" who has first updates the BIOS, install Vista and then the drivers needed and utility (as "Toshiba Assist" and all the others, I guess). As it is written in the guide step by step, all programs etc. will be deleted, as formatting of the hardddisk, ok.

  But with the laptop, there wasn't "MS Office OneNote 2003" already installed and this program, I have not found on one of the DVD / CD. On the CD is 'MS Works 8.5' and on 'Tools-CD"that I was burning of 'C:\toolscd' there are things like"InterVideo Win DVD Creator"(the player) and"recorder of Sonic.

  On the "Recovery-DVD" is just the Image of Windows XP preinstalled + software etc and I think of course, there is also the OneNote2003, but like I said I can't find the setup.exe from OneNote2003 anywhere...

  Or could it be that OneNote2003 will also be installed with the installation of Vista? What is a "core" Vista, don't not patched by Toshiba? As I was reading in the Vista_Express_Upgrade_instruction_multilanguage.pd f (the manual "upgrade progressive", first BIOS is up to date, then installed Vista and here again I have to use the toshiba DVD to install the software and drivers...) Is it only "utiltities' as"Toshiba Assist"or as software?

  Last question: update after the BIOS that is needed for Vista, is still possible to install the "old" Windows XP + stuff pre-installed recovery-DVD or this BBIOD goof only for Vista update and I cannot restore the original recovery image?

  And anyway, can I install new stuff like Works 8.5 etc. on Vista or will I have problems with it?

  Thanks for the replies.
  Greetings, launchee

  Hi kai

  I know that the Vista upgrade is a bit confusing
  So I'll try to clarify some things:

  1.) Toshiba Recovery XP CD contains all Toshiba drivers, utilities and tools, as well as additional programs like OneNote, Win DVD, etc.
  It is not possible to install this software separately without using the recovery CD because these programs are part of the image.

  2.) as far as I know the received "Windows Vista Home Premium 32 bit DVD of moduslink company is not a restore CD but the real Windows Vista installation CD. That's why you need to install all the tools of Toshiba and the drivers after installing Vista. This CD does not include additional software such as OneNote or WinDVD

  So finally, you will be able to install Works 8.5 on Vista because you have one working on CD separately but it s not possible to install OneNote from recovery CD

  But you can try another way. You could create a second partition and you could install the Vista to the second partition.
  Laptop you would use the two operating system; XP and Vista. The Vista also provides a clean boot manager.
  Therefore, it is very easy to switch between the two OS's.

• Officjet 7610: Scanner not recognized

  I just bought this printer and used the HP software to install on a wireless network. The printer is recognized and installed, but the scan option is not recognized.

  I deleted the drivers printer and reinstalled but no change.

  I applied the suggestions on the forum and still no scanner. Apple and HP printer list shows that noth printing and scanning is supported for the wireless.

  The same thing has happened now with our Officejet 7500 a

  Please can you advise.

  Hi @Norman_S

  Thanks for the reply.

  Yes, it looks like there is a network problem or a problem with the printer.

  When you reset the settings and reconfigured the wireless. That's happened?

  • You are connected the printer wireless?
  • You update the firmware?

  When you bypassed the router using HP direct, what happened?
  If the printer was able to connect wirelessly, there is a problem with the wireless network settings.

  Tips for successful network configurations:

  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • HP recommends a WPA and WPA2 encryption.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable the WPS.
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • What router do you have? Verify that the router has the latest firmware on the manufacturers website.
  • If you have a Mac OS X running 10.8 or earlier, click here to locate and download the update of the firmware.
  • If you have access to a computer running 8.1 Windows or an earlier version, click here to locate and download the update of the firmware.

  Please reply to this message with the results.