Desktop all-in-one HP 2113w 19: install Windows 7 or 8 on desktop PC HP all-in-one 19-2113w...

Similar Questions

• Cannot install Windows 7 on an all-in - One HP 1105

  I have this computer came with Windows 7 Starter factory installed. It is an all-in-one Professional PC 1105 with product code C6Y91LT #ABM.

  I try to install Windows 7 Professional on this topic and I'm having a hard time because Windows install keeps asking for a CD/DVD driver which I can't locate and for which I have never seen Windows asking a driver before.

  I tried page drivers on HP.com, I extracted the existing drivers with DriverMagicianLite, I tried to install versions both 32 and 64 bit, tried with IDE and AHCI set in place for storage in the BIOS, and finally I ran out of options.

  I try to install from USB with the same installer, I have used successfully for centuries.

  Error comes just as I hit 'Install now' to the Windows Installer Wizard, about a quarter section of information collection.

  Exact error is: "A required CD/DVD drive driver is missing. If you have a driver floppy disk, CD, DVD, flash orUSB drive, please insert it now. "
  I do not have the installation media that he is supposed to come with the computer and it doesn't have the recovery partition do not know why.

  Is it possible to install Windows 7 Professional in this bunch?

  Please help, been stuck here for two weeks already.

  ----------

  When something does not work as it is supposed to, then it works as expected.

  For some reason, the I have the DVD of Windows 7 has been around.

  It doesn't have SP1, I assumed it was the question, although I can't be sure what update could have been any mistake installing.

  Thanks for your help Paul =)

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I had to install Windows 7 on my computer so I lost all my programs.  Adobe ExportPDF was one of them.  Should I buy a second time to put it back on the computer?

  I had to install Windows 7 on my computer so I lost all my programs.  Adobe ExportPDF was one of them.  Should I buy a second time to put it back on the computer?

  ExportPDF is not "a program"; This is a subscription service that is used on Acrobat Reader.

  Download & install Acrobat Reader DC (older versions no longer work), and then sign in with your Adobe ID and ExportPDF will be once more at your disposal.

  [subject moved to cloud Document PDF Services forum]

• OfficeJet J4680 all-in-one: J4680 does not work after installing windows 10

  I have recently installed Windows 10 on my Dell laptop.  Yesterday, I was able to print wireless at my J4680 JO.  Today, I tried to analyze, and he is identified as not online.  Can't print now.   I turned off laptop, router and printer and restarted.  I added the latest driver.  Still no luck (in print or scan - still says offline).  Help, please.

  Thank you

  Hi @mlanders55,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, since the upgrade to Windows 10. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the printer software already, I'd say to start it there first. Here is the link to the latest drivers: OJ_AIO_J4600_Full_Win_WW_140_408 - 5.exe

  You can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor?

  I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

  Please let me know the result and if there is anything else I can help you. Thank you.

• HP psc 1210 all-in-one: after installing Windows 10 my hp psc 1210 does not scan, I get a "need WIA driver" (but it prints)

  Hello

  I installed Windows 10 about 3 days ago. The printer will print but when I try to scan I get the following error. Thanks in advance. print but when I click on Scan

  Hi @gregmalnickhp,

  I see you found the error "required WIA driver. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The WIA drivers are part of the Windows operating system.

  Download and try to fix the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

  Back up the registry first.

  How to back up and restore the registry in Windows.

  Restore default startup for Windows Image Acquisition (WIA) Type.

  If you're still having problems, I would say to uninstall and reinstall the printer software.

  Temporarily, run Antivirus software and try to scan the image.

  If there is anything else I can help you, let me know. Thank you.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Can I take a windows desktop 8 and remove windows 8 and install windows 7

  Hi, my girlfriend and her family bought a new computer. It is a desktop with windows 8 on it. Well, all of us hate windows 8! the computer works more and more slow and is in worse and worse. His moma does not know how to work it and I personally look FORWARD to windows 8! But my brother bought a cyberpower gaming computer and it came with a disk that is only a windows 7 installation disc. Can I use this disc to install windows 7 on this computer windows 8? We just want to get rid of Windows 8. His computer had windows 7 on it the disc was not used. Please help we just want to get rid of windows 8. Thank you

  Tuesday, April 29, 2014 14:29:24 + 0000, Weathers Tanner wrote:

  Hi, my girlfriend and her family bought a new computer. It is a desktop with windows 8 on it. Well, all of us hate windows 8! the computer works more and more slow and is in worse and worse. His moma does not know how to work it and I personally look FORWARD to windows 8! But my brother bought a cyberpower gaming computer and it came with a disk that is only a windows 7 installation disc. Can I use this disc to install windows 7 on this computer windows 8? We just want to get rid of Windows 8. His computer had windows 7 on it the disc was not used. Please help we just want to get rid of windows 8. Thank you

  No, you can't. No matter how many records he has, the computer was delivered
  with a license for Windows 7, for a computer.

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both.
  This traditional desktop Interface is almost identical to Windows 7
  interface; the biggest difference is that there is no Orb start
  Click to bring up the start menu. But note that you can get the beginning
  Orb back using one of the many third-party programs, either for free or
  very inexpensive (Classic Shell to)
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.
  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you would have a hard time realizing that it is not
  Windows 7.
  And another new program third party that I love and you can
  the ModernMix $ 4.99 at http://www.stardock.com/products/modernmix/
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206

• Can't access toolbar or of desktop icons after installing windows 7

  I recently installed windows 7 on my desktop, thought everything was good.  Sometimes, when the computer is powered on or after he wake mode in standby, the toolbar icons and desktop disappear.  The bottom rises and I can right click for options.  It still allows me to use most of the options when I right click, but that's all I can do.  I can't access the toolbar, Ctrl alt delete is that the black screen (nothing happens after that). But it happens that all the other time, or so when I turn on the computer.  If I run a cd boot everything works fine. I'm running vista, and I made a custom, Setup because the upgrade was not an option.  I also tried to boot from the cd and do a repair, but the problem is still intervene.  I made sure that everything has been updated before I did the installation and followed all the instructions.  I did all the updates that are available for installation (when I can get the operating system works).  Any thoughts?

  ErikA2008,
  If you still experience this issue, you can try these things and then let us know the results.

  First off I would say running a different virus scanner to ensure that nothing achieved by your installed one.  You can use the Onecare Safety Scanner or there are many other free around.

  Then run the following:

  Disk error checking

  System File Checker
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed windows 8 and can not find all my favorites etc. I tried to reset, but it did not help. How can I restore my old info?

  I tried to find my old firefox database files on explorer 7, but the old files I tried came because can not open or cannot be found. I tried the suggestions of mozilla help on what files contain the news but got the same results. I have reset but it did give me a few new things I've done since the installation of windows 8.

  Hello, have you installed windows 8, more an another operating system on a single computer and you have any form of prior backup available?
  one thing you might try is to search the whole file system (make sure to include also hidden sites) for the term bookmarks*.json - if all results appear with a date in the file name that is before installing windows, then you probably import them into your firefox profile.

• Re-installed windows 98SE on satellite 230CX only one problem left

  I have just re installed windows 98SE on and old satellite 230CX and I only have one problem left. Whenever I start windows it is a plug-and-play monitor and try to find a driver for it. There is no connected another monitor and the screen works well. I know this isn't a major problem, but it's just bugging me now.

  Any help would be appreciated

  See you soon

  Rob.

  Hello

  I found the info that this camera comes with Win 95 and on the Toshiba download page under archive, you will find all the drivers you need.

  Try to install the driver display that there are listed. This is a very old unit and I can't tell you more about your problem.

• How to install Windows xp from a pc to all the other pc in lan at some point?

  I have 10 PCs on my home network. all PCs are running Windows xp. I want to fomat them, and then reinstall the new window xp. I don't want to install one by a pc. I want to install everything at once. can someone help me please?

  Hello

  You must deploy a server to install Windows on multiple computers at the same time. You can't install Windows on multiple computers at the same time using a LAN.

• Is it possible to buy a new computer with Windows XP or buy one with Windows 7 and remove it and install Windows XP? I have

  I now have a computer with Windows XP and wanted to buy a new computer.  All new computers come with Windows 7.  Is it possible to buy a new computer with Windows XP (or buy one with Windows 7 and remove it and install Windows XP)?   I like XP and have talked to people who are not really happy with Windows7 and holds XP back.  AND I also discovered that my printer is not compatible with Windows 7 - it is not that I love him and want to keep it.  I can't afford to buy a new computer AND printer, since I have been unemployed for more than 2-1/2 years.   I would like to use XP on a new computer!   I would appreciate it if you could let me know what is possible or if I'm stuck with my old computer.  Thank you very much!

  Probably not, you will find a computer with XP on it.

  If you buy a computer with Windows 7, you will first need to know if it would be compatible with Windows XP. Probably not, because they are not designed for XP and drivers are not available.

  Unless you want to spend the time, you're stuck with your old computer.

• How to install Windows 7 on several desktop computers?

  I would like information about how to install Windows 7 on desktop sixteen I just built.

  I build them from scratch. I want to know how to install Windows 7 on them.

  What type of disc do I need to buy... Do I have to buy 16 disks in Windows 7... or is there a simpler solution?

  OK, I'll look into the full retail version. That means, correct me if I'm wrong, what with the commercial full version Windows, I can install it on all built I want, as many times I want, it just cannot be installed on multiple computers that is active.

  No, incorrect.

  Full version (retail):

  -a computer can only be reinstalled many times on the same computer.

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -a computer can only be reinstalled many times on the same computer.

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  But, even once, correct me if I'm wrong, OEM, once the computer version dies, the OEM licenses dies with him, and I'll need to buy another license... Fix?

  Fix

  So my best bet would be to go with the full retail version of Windows 7?

  Depends on, which is why it is best to get full retail Windows 7, but they are difficult to obtain.

  What version of Windows 7 System Builder? I've never heard of this, but I see it at Walmart.com, etc..

  System Builder - aka OEM license.

• Re-install windows 7 on refurbished Dell desktop computer

  Hello

  I bought a Dell repairman authorized Microsoft Office redecorated.

  Windows 7 pro came pre-installed and no discs were included.

  I need to re - install windows 7 on the desktop and use windows 7 pro refurb pcs key on the sticker.

  What is the right ISO file to use?

  Thank you!

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?