Desktop HP Compaq Elite 8300: driver Wifi missing and all what I need!

Similar Questions

• Desktop HP Compaq Elite 8300: stolen PC

  Hello

  My PC HP Compaq Elite computer 8300 was stolen yesterday from my apartment!
  I checked the specifications of product, and he says there is an anti-theft Intel processor installed on my PC.

  I wonder if there is anything that I can track my PC!

  PS I have already informed the Police about this, but apparently they have no idea about the ability to track the stolen PC.

  Hello

  Yes, there are few services around and the way it works is similar to the GPS and mobile phones. It can allocate wher the power is turned on, BUT you have to pay for this service first, too late now, I think.

  Sorry, I tell you this story: one of my friends who have used a similar facility for his iPad. The iPad was stolen, a few weeks later, he could see his location (more), using internet and he reported this to the police. Police told him they'd contact police officers of State to help him. Actually, he contacted the State to help police. He could not see on the internet 6 weeks later. No idea of what was going on. No good news from the police, the two States.

  Kind regards.

• HP Compaq Elite 8300 CMT: updated graphics card for HP Compaq Elite 8300 CMT

  Currently, I have HP Compaq Elite 8300 CMT Business PC with ATI Radeon HD 7450 graphics card. This map, however, does not seem to be compatible with the new CC in Photoshop.

  I want to update the graphics card. Supported for this PC graphics cards like NVIDIA GeForce GT630 (2 GB) FH PCIe x 16, seem to have been replaced by new models. I would like any suggestions to solve this problem.

  KO

  Power to the motherboard and the power are not compatible ATX.

  There are some doalogue / of in-depth discussions on the hacks and mods. Your strictly on the own with this.

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Compaq-8000-elite-power-supply-upgarde/TD-p/832709

• How to enable VT support on new HP Compaq Elite 8300?

  I received my new small form factor desktop - HP Compaq Elite SFF 8300.

  It comes equipped with Intel Core i7 - 3770 Quad core CPU @ 3.40 GHz processor.

  According to the site web of Intel, this processor has the full support of VT (virtualization), however, when I install the VMware (ESXi) product, it tells me that VT is not enabled and I need to enable it in the BIOS.

  I tried to get into the BIOS by "ESC", but I don't see an option on how to enable VT support. I installed the latest available BIOS too, it did not help to unlock this option.

  What do I need enable VT support on my computer?

  Thank you!

  DM

  Hi, DM:

  On my 8200 Elite, the option enable the VT is in the Security menu.

  I think it would be the same on the 8300 elite.

  Paul

• Compaq elite 8300 sff: upgrade memory for compaq elite 8300 core i5 3570

  Hi experts,
  
  I m using compaq elite 8300 sff on win 7 x 64.
  He has already double 2 GB pc3-12800 (800 MHz). I want to spend at least 8 GB. I m thinking about buying 2 x 4 GB of the same type, is it possible to do?
  I can't find any specs for its bus speed, so what is the fastest, it can handle in case I want to replace the double memory?
  
  Thank you.

  Hello

  Yes it will work as well.

• HP Compaq Elite 8300 All in One PC

  Hello

  HP Compaq Elite 8300 C2Z24ET is compatible with windows xp?

  Best regards

  BM

  Hello

  Yes, BUT why you want to run XP now? Microsoft continues to support very soon.

  Kind regards.

• I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  See this article would allow:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

• Compaq 6510 b: bootmgr is missing and I don't have a CD/USB

  Hello

  My HP Compaq 6510 b has been infected by the virus of defense crypto. I searched like crazy and could not find any solution and decided to sacrifice my photos and videos. But turned out even restore the laptop is not easily possible. AFAIK, the laptop is Vista but Windows 7, when I open it. So, after much research I found someone who said I should type collection in the area of research manager and allows to restore the laptop but unfortunately that does not exist in the laptop so I looked for something else and found out that by right-clicking on the computer that I can go to manage and then active partition and tried to restart. And then it happened, he showed "bootmgr is missing, press ctrl, alt and del to restart" so I did, but the same screen appears.

  I searched online again and said I need a cd of Vista or Windows 7, but I don't have that. They also said that it is the only way to fix the laptop. So now I'm out of options and hoping someone here can help me.

  Is there anyway I can fix this without the CD and restore my laptop to its original settings? Or can I restart my laptop without the bootmgr thing missing attachment?

  Really need help with this and your help will be greatly appreciated. Looking forward to the answers.

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are not sure, first try the 64 bit version.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• CD-ROM drive is missing and AutoPlay does not work

  Original title: CDROM

  I can not find my drive in 'my computer', I tried to install the new drivers, but it does not work. I don't know that this is not a hardware problem cause the disc rotates when I insert a disc, it does not autoplay. Please help someone

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that CD-ROM drive is missing from the information you have provided to us, and that it does not autoplay. I will certainly help you in this matter.

  1. What is the operating system installed on your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• my cd/dvd drive is missing and I don't know why

  I went to play a cd on my laptop and it had not recognized cd drive

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• After a quick scan, my computer sent me a message that the space on my hard drive was missing and missing. He said to go online to learn how to recover

  my computer tells me that I must recover not accounted for space on my hard drive. as to my previous question on office starter 2010 parameter itself upward at this topic is own drive hard-'Q', when I downloaded the adobe flash player and activated, the 'Q' drive has disappeared, and office starter is still there, so this problem is solved.

  Content added from duplicate thread:

  message received after a quick scan - you have brought space missing on your hard drive. go online to find solutions

  Part 1 of the request: a few weeks ago, after a quick scan, I received this message, he was absent from my hard drive space and missing. How can I recover this please?

  Part 2 of the query: I recently down loaded to my e-mail, my RESUME, in the process of discovery, inadvertently, I had my own word processing (office 2010 starter). then I followed the steps to install this, and the software created a partition for itself. I mean, my computer shows now that I have 2 hard drives, the original 'C' drive and a new drive "Q". what I've done wrong? also, my mother, who also has family windows7 premium was not aware that she had a starter of office 2010, which she has, and she can't work out how to activate his either. Thank you.

  If your MOM PC shipped with Office Starter, type the word in the start menu > programs research and the text file box, which reveals the word shortcut, double-click the shortcut to start Word (or rt click on > PIN to the taskbar)

• Compaq elite 8300 all in 1: Compaq 8300 allin 1 bought with HARD drive erased

  HARD drive is completely wiped and no information system have also tried the keys F11 and it too is not go... can I get HP restore disks

  You can buy all of the surgeons computer recovery discsHERE. Just put the model number - need a more complete than all in a single desktop Compaq Presario.  Is HERE IS a SAMPLE for model number CQ1-1130.  For the model that you own should be the same price.

• HP Compaq Elite 8300 CMT, AMD Radeon HD graphics 7450 DP driver problems

  
  

  Hello

  I hope that you tried this version of the driver from the HP driver page. However if not, please install this version once:
  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5232864&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_119443_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If you are still having the same problem, I suggest you to remove the extra video card from the unit and try only with integrated card.
  You can try this AMD card in some other unit and check. If you find the problem with the card, get it replaced.

  Response with update!
  Although I am an employee of HP, I speak for myself and not for HP.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "acceptable Solution".

• HP Compaq Elite 8300 SFF: Ram additional Elite 8300 SFF

  Hello

  I bought a vith PC (sold the first time 2013-02-14) used only 8 GB of Ram (4x2Go), so I would like to replace two of these modules of RAM of 2 GB with two modules of 8 GB but when I read the manual, it says I quote: "to obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory configured in a high-performing mode dual channel."

  Gan anyone expose this mean in my case?

  Thanks in advance

  Asger

  You are the very welcome.

  The quickspecs are updated when the reference manual was not.

  Mine says the same thing... 16 GB max, but the quickspecs update said 32.  No changes to the hardware.

  Look at it this way... it would be absolutely no logic that my old Elite 8200 of 2011 model has more capabilities than the 8300 elite memory.

  They are like cars... they add more features every year, not less.  The 8300 elite added USB3 ports.  The 8200 Elite has no USB3 ports.  8300 elite turns 3rd generation core processors/memory at 1600 MHz.  The 8200 Elite short 2nd generation core processors/memory at 1333 MHz.

  All I can tell you is that it will take 4 x 8 GB memory like mine did.

  Just make sure you get compatible PC3-12800 memory.

• HP Compaq Elite 8300 SFF: Block power Hp Compaq Elite 8300 SFF + graphics upgrade

  In my work asked me to provide five computers capable of video editing on Adobe Premiere PRO 5.x. What I have are available 8300's, with an i5 650 and 4 GB of ram.  I'm looking into upgrading to fulfil the task a bit better, but as an NGO, we work with a very small budget, which is why recycled desktop computers.

  What I wanted to put in a new graphics card and some more ram, however, it seems that the supplied 240W PSU don't deal with that.

  So my options are:

  Run a very low power, small footprint GPU on the original, such as power supply

  http://www.Palit.com/Palit/vgapro.php?id=2392&lang=en&PN=NEAT7200HD46-2080H&tab=SP

  or

  https://www.msi.com/graphics-card/N730K-2GD5LPOCV1.html#hero-specification

  It might also be possible to operate a full card large saving in energy and just cut a hole in the lid of the computer, although I've yet to find a good alternative.

  Another option, I'm hoping to notice is the upgrade of the PSU itself. In the partsurfer, I find that the SFF-8200 has power 320W, PARTNO 613765-001

  Although I don't care there IN the case, I need to make sure it works with the MB. It may be possible to execute it (or another more powerful PSU) as well as a better graphics card.

  Thanks for your thoughts and ideas!

  F

  The most serious problem is the limited on the slot to power. It's on the SSF 25W.