Desktop Pavilion a 1110n: CPU is not supported

Similar Questions

• Satellite L650 und Windows 10 error: this CPU is not supported

  Hello

  I have the satellite L650 not modelsk1ja-0e8017

  Recently I have continually mistake to Get windows 10 app 'this CPU is not supported.
  I try by activation and deactivation of NX bit, but it does not work. When will you provide new bios after the version 2.4 of the BIOS?

  I read on the similar message on CPU is not compatible with the new system Windows 10.
  Obviously this is a bug in software and it would be already solved Ms.

  I recommend you to check the updates system available for download and installation, install all Windows patches, reboot the laptop and re-run this tool from Ms.

• ProBook 6440 b: cannot upgrade to Windows 10 - "The CPU is not supported" error message

  Hello everyone

  I have a HP ProBook 6440 b. CPU is intel core i7 M640. It is currently running Windows 7 64-bit edition. I'm trying to update to 10 Windows using Windows 10 Upgrade Wizard and it gives me error. It says "Windows 10 does not work on this PC. The CPU is not supported (NX). »

  Any help will be appreciated. Thanks in advance.

  Hello:

  I suggest that install you the upgrade from the DVD (authoring tool of your own from the link below - media Make).

  https://www.Microsoft.com/en-us/software-download/Windows10

  The DVD will bypass the hardware checks.

  Also, when you install W10 from the disk, skip verification of updates when you are prompted.

• Cannot install Silverlight, get error 1503, CPU does not support the SSE instruction set that Silverlight requires to run

  Original title: silverlight

  I tried to install Silverlight on my computer running Windows XP 32-bit with service pack 3. My question is, it downloads and then when I try to install, it appears that my CPU will not Silverlight support. I get the Message 1503, CPU does not support the SSE instruction set that Silverlight requires to operate.

  So here's my question... How can I fix it? And what is the problem? Any help would be appreciated... Is it a I need a new operating system problem or just a cranky computer problem?
  Thank you
  Lynn

  I tried to install Silverlight on my computer running Windows XP 32-bit with service pack 3. My question is, it downloads and then when I try to install, it appears that my CPU will not Silverlight support. I get the Message 1503, CPU does not support the SSE instruction set that Silverlight requires to operate.

  So here's my question... How can I fix it? And what is the problem? Any help would be appreciated... Is it a I need a new operating system problem or just a cranky computer problem?

  Thank you

  Lynn

  ========================================
  This means that your material is not up to the task.

  If you search the Forums Silverlight 1503
  you will find that you are not alone.

  Silverlight .NET forums
  http://forums.Silverlight.NET/search

  The following article explains what is a CPU.

  Central processing unit
  http://en.Wikipedia.org/wiki/Central_processing_unit

• Upgrading from Windows Vista Home Premium at 8 - CPU does not support NX

  Hello

  I have Vista Home Premium (very probably OEM as it came with the PC) on a PC and I bought the upgrade license to Windows 8 Pro.
  I understand that it is in terms of the license transition, but here is my problem:
  The CPU does not support NX (and for sure there is no setting in the BIOS for this).
  So I can't move to 8.
  To replace the CPU, I need to replace the motherboard.
  If I replace the motherboard my understanding is I'm losing the license because it OEM.
  So, in reality, I can't switch to Win 8.
  The license, I bought said that I can pass any system running XP, Vista, Win 7 to 8 Win.
  It does not distinguish between older versions of Windows OEM and retail versions.
  For me, it's a huge conflict.
  So the question is:
  Can I change the CPU + motherboard to earn 8? or not?
  Thank you
  It has been some time but I finally had the time to do the upgrade (hardware + software).
  For history and for others who could come on this post with a similar question and be discouraged by responses like this:
  I contacted the technical support of MS and they confirmed that I had a Windows 8 Pro upgrade license and after upgrading my license would Win 8 Pro full-detail (what you want to call it). Essentially, after upgrade, I can reinstall any other motherboard. Of course you can only use a license on a machine at one time.
  (Of course your upgrade license type may be different to mine, so you should check they type of license)
  In any case, what is more interesting, it of that I got the confirmation that I can do a clean install and activate my upgrade license. Not only that, but they recommended the installation of Vista should not be present when installing on 8 to win. I was very skeptical and I asked for an account of the cat to be on the right side. They assured me that the support had made several times and is not a problem.
  And so, I do a clean install on the new motherboard (and a new player) and activated windows 8 with no problems at all.
  It seems very stupid that you can change the motherboard after the upgrade, but could not make the move and the Windows update at the same time. Fortunately, it is not the case.
  To me, it seems that the MS are aware that in you to go from XP (soon), they should also use the materials for the upgrade.

• Message "CPU is not supported.

  my CPU was upgraded from windows 7 to windows 10. Well, I did a reinstall flash drive system. So, when 10 windows begin to have pictures in it, I tried to install window 10 flash player, it wouldn't work. so I formatted my hard drive & reinstalled my windows 7 recovery disk and then upgrade windows 10 asked me to update, I said yes, now I get the message "CPU is not supported.

  Last reply no where about useful! It is not a graphics issue or a multiboot installation

  Hello

  Please contact Microsoft Community.

  I understand how frustrating, it would be, I suggest refer you to the suggestion given by Andre Da Costa in the mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-win_upgrade/CPU-not-supported/a6cc9174-2991-47cb-9d22-9f5c08c3b7ab

  I hope this helps.

  Kind regards

  Anusha

• Error starting data recovery - "your CPU does not support long mode.

  Hello

  When I turn on the VM data recovery, and after that he begins the boot process, it displays a message "your CPU does not support long mode. Use a 32-bit distribution"

  Data recovery is installed on an ESX 4.0 update1 then the ESX is installed on a VMware Workstation 6.5.2 as a virtual machine in my home test environment.

  My processor is a 64 bit CPU (AMD Phenom 9950 Quad-Core).

  I wonder if this message is because the ESX is running in a virtual machine on the workstation may be that it not only Duke that the processor is a 64-bit?

  Someone at - he of the idea?

  Thank you

  Marcos

  You can run the 64-bit if clients your ESX is a virtual machine. VMware Workstation does not pass through the VT extensions that are necessary for the performance of a 64-bit as VDR host.

• RH EL 4.6 64 bit-> your CPU does not support long Mode?

  Hello

  I try to create a guest RH EL Linux 4.6_64bit on a HP DL585G1 ESX3i server build 123629.

  After the start of the guest, I get only the Message: "your CPU does not support long Mode. Use a 32-bit Distribution"

  The fool is, when I boot the direkt ServerHardware with this installation of EL HR CD, the installer runs fine!

  So what is happening here?

  Any clue?

  Thank you

  Thomas

  You may need to test if:

  (a) you run a review of 'good' (in terms of supported 64-bit comments) CPU (for example, several AMD chips have been officially ranked 'not kosher' VMware because of the inadequate support of segmentation) - see http://kb.vmware.com/selfservice/viewContent.do?externalId=1901 for more details.

  (b) AMD - V / Pacifica (VT if it is an Intel CPU) is not disabled in the BIOS of the computer.

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• CPU does not support long mode.

  Hello

  I have vmware esxi 4.0 installed on a HP dektop. I have already 3 VMS running (perhaps 32 bits), but today when I tried to install FreeBSD 64-bit and CentOS 64-bit, I get the following error "CPU mode is supported not long." or "use a 32-bit version.

  I find this kind of starange because ESXi4 only installs on 64-bit processors. For my processor supports the 64 bit, but whu not guest OS.

  (oh... everything is my Core i7 processor)

  Is there something that I am missing?

  Thank you

  Antonio

  The BIOS supports VT option VT is often turned off. There are other options in the BIOS may also be defined, but first try

• G7 notebook pc Pavilion: coolsense, my product does not support coolsense

  Hallo,

  I tried to download coolsense 2.20.21 but after preparation of the installation it says that my product is not compatible coolsense. Is there a solution to this issue?

  Hi @warriorito,

  Welcome to the HP support community! I read on your HP Pavilion Notebook does not allow the Coolsense must be installed. If your laptop is not come with installed on you Coolsense technology cannot be added, as it is not intended for your laptop.

  Thank you.

  You can click thumbs to the top button to say thank you.

• HP Pavilion dv6-6154nr: cpu does not work

  Hi all! Recently, I cleaned my cooler fans that my laptop had a sound strong. When I reassembled all the pieces, I that I had discovered this comp. is not the scene. The screen is black and the capslock flashes once preiodically. I discovered that can be a CPU problem. I tried the 'dry power up' method, and it did not help. If someone in front of the same problem, please could you write your solution or maybe someone knows what to do? Thanks in advance.

  Ok.

  If it worked before you took it apart, it means dismantling to see what you missed when assembling it.  You may need to have someone with more experience to take a peek. This usually means a shop or HP.

• Pavilion G6-2314Ax: drivers do not support which are mention that model Pavilion G6-2314AX

  Hello

  I downloaded the drivers given to this place , but these drivers don't work for my machine could you please provide the correct url to download the drivers.

  Here are the details please provide specific softwares of pilot

  Details of the Ethernet device:
  -----------------------------
  PCI\VEN_10EC & DEV_8136 & SUBSYS_184A103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_184A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Information on the USB key:
  ________________________________
  PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03
  
  Information about ACPI:
  ________________________________________
  ACPI\HPQ0004
  * HPQ0004
  
  Details of the device of Bus SM:
  ___________________________________________
  PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C & REV_14
  PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  Hello:

  If you have installed W7, here are the drivers you need...

  First install the amd chipset drivers and reboot.  To install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=W indows 207% 20-% 2032

  Ethernet device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

  ACPI\HPQ0004:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

• Get 10 Windows tells me now that my CPU is not supported

  When Windows 10 jumped on our systems, I checked the check your PC, and everything was fine and dandy with her. No errors and my PC was ready to go.

  So today, I looked again and noticed the following message is displayed:

  

  I have a registered copy of Windows 7 Pro

  Service Pack 1

  64 bit OS

  CPU AMD Phenom II X 6 1035T 2.60 GHz

  8.00 GB OF RAM

  All programs on my system are saved, and the only updates that have been done was the last Microsoft Update June 9.

  Anyone has any suggestions on what may have caused Microsoft to "change his mind" with my system?

  Very strange to me.

  Tim

  André,

  Thanks for the graphics display column as follows. It was very interesting to read, but unfortunately it didn't help me at all.

  That's what I was doing, and I think that helped.

  First of all, I disabled my system and has made a cold start and made a F9 to check my system. That I would for a PC-Check to see how my computer was running. The processor, memory and HD, all came up big.

  

  Then I went to Windows and went to the resource and performance monitor to do a test.

  He told me that old files were still stuck in my LogMeIn system that caused an error in the system.

  The error was:

  ROOT\LEGACY_LMIINFO\0000

  and there are 3 files in loading device manager still whenever I booted up.

  So I deleted the files, ran the resource and performance monitor from another test, and it was clear!

  This was my result this time:

  

  So I hope that, when to get Windows 10 checks my computer again, it will find a clean computer this time.

  Thanks for your previous assistance,

  Tim